Re: Applying a change to a selection in Aperture only changes one image

Modified title as recommend by Nubz.
This tip is again ready for consideration.

This tip is ready for consideration and inclusion into the *Aperture Installation, Setup and General Usage* forum.
thanks

Similar Messages

Applying a change to a selection in Aperture only changes one image

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
If you are attempting to apply a change to a selection of images but the change only effects one of the images there are a couple of possibilities:
# You have Primary Only selected. This setting is found at the lower right hand conner of the main window. It is the middle icon with the 1 on it.
# You are attempting to apply a rating, color label or flag from the Metadata pane of the Inspector. Regardless of the state of the Primary Only button if you set these adjustments from the Metadata pane then only the primary selection is modified. To apply a rating, color label or flag to a selection use the keyboard shortcuts or the *Metadata-> commands*.
This is the 1st version of this tip. It was submitted on February 8, 2011 by Frank Caggiano.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This tip is ready for consideration and inclusion into the *Aperture Installation, Setup and General Usage* forum.
thanks

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport

I want to change my iCloud account. Buying iPad we gave a virtual (forwarding) email addr. We need to change to a real address. But when we try to change the iCloud account, we can only change the password. Note: we don't have Mac, only iPad and Windows.

I want to change my iCloud account. Buying iPad we gave a virtual (forwarding) email address.
We need to change to a real address.
But when we try to change the iCloud account, we can only change the password.
Note: we don't have a Mac, only an iPad and Windows.

Welcome to the Apple Community.
Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

Can't change my default mail account. Only shows one account in settings

I have two email accounts on ipad2, but only one shows up as a selection option for default. Would like to change default account to the account not showing as current default account.

Your default email account is probably the one that is associated with your Apple ID email address.
Go to Settings>Mail, contacts, calendars>Mail>Default Account and see if you can change it there.

Not able to locate link HERE, in this mozilla firefox FORUM, to change my password HERE. how do i change my mozilla help forum password (only that one)?

i wish to be a part of this mozilla firefox help community forum. that's what i call it: a help forum. but it's sorta kinda counterintuitive, wouldn't you agree (?) that i am not able to change my own password, here, on this forum.
do you know how i can change my password for THIS mozilla firefox help web site? there is no link that directs me to that particular thing. it is not available under any of the links that are related to my profile. if i cannot log on in the future, then what good is it to join?

If you want to change the login password for this site (the Firefox help/support forum), do the following:
*hover the mouse pointer over your ID/name at the top of this page while logged in
*a drop down will appear; click on the "EDIT PROFILE" option
*a page will open; there is an option to change your password
**you must enter your old password then enter your new password '''''twice''''', then click "Change my Password" at the bottom
If that does not work for you visit https://support.mozilla.org/forums/contributors and post a new question there with "[ATTN: Admin:]" at the beginning of the question title, to get the attention of an administrator, explain the problem, and await a reply.
*NOTE: the site https://support.mozilla.org/forums/contributors is not for general support questions, so please do not post general support questions there.

How to change row background when the value was changed?

hello expers!!
i need your help...plz help me.
i want my table row(specific) background changes when the user changed the value in a cell. I am able to know that a value in a cell was changed but the problem is i dont know how to change row color background. I've researched over the internet on how to solve this problem but nothing was found.
please see the link to help you visualize what i mean. tnx!
[http://www.flickr.com/photos/28686474@N04/2708299927/]
tnx in advance!! code snippet will be a great help...
Edited by: kagaw3000 on Jul 27, 2008 8:22 PM

final JTable table = new JTable(data, columnNames) {
int lastRowChanged = -1;
@Override
public void tableChanged(TableModelEvent e) {
     super.tableChanged(e);
     lastRowChanged = e.getFirstRow();
     repaint();
@Override
public Component prepareRenderer(TableCellRenderer renderer,
               int rowIndex, int vColIndex) {
Component c = super.prepareRenderer(renderer, rowIndex, vColIndex);
     if (rowIndex == lastRowChanged) {
          c.setBackground(Color.RED);
     } else {
          c.setBackground(getBackground());
     return c;
...........this code will changed background color when data was changed BUT if i changed another data in another row the previous backgound color(RED) will be erase. To make it more clearer, it will only change background color of a row only to one row NOT to multiple rows(that is being edited).

You SHOULD be able to apply batch changes just by selecting multiple images

Don't get me wrong, i love lift/stamp. It's very helpful.
BUT, I really hate the fact that in Aperture you can't just drag-select a group of images and then either apply adjustments to all of them, or –more often– keywords.
Why does Aperture keep you from doing this?
At the very least, you should have the OPTION in PREFS to do this. Or not.

I'm sorry you are having difficulty.
It's simple: you select multiple images, right?. One has a thick white border and the others have thin ones. But, even though you have multiple images selected, if you input keywords, or other metadata, or an adjustment from the Inspector, it only applies to the "primary" image.
There should be an option to have that be the case... OR, if you want, to apply whatever adjustment from the INSPECTOR you choose... and have that be applied to those multiple images.
"...why would anyone be likely to want to see each single adjustment step applied to a large number of images before settling on the preferred combination?"
Because everyone's not you.
I just shot 100+ table tops that were VERY similar lighting / angles / etc. And I needed to comp them out for the client ASAP. The technique I described would've saved me a lot of time. Instead I had to do ONE image of the mini-batches, and then lift/stamp the rest. When it would've been so much easier for me to drag-select the 8, or 15 in a group, and assign them all keywords at the same time, and do some adjustments. Bam. Quicker.
Oh, and per the "what is the universe" question? You don't have to look any further than Apple's own operating system to see this "crazy" and "unique" technique in action: go to FINDER, select multiple items of folder (drag around them), and then CTRL-Click and choose a label color. Viola! ALL the items become that color.
Like I said, I'm only suggesting Apple provide the OPTION of working this way. And it IS the norm in most operating system / program environments.
In fact, watch the Lynda.com vid on Aperture 3: the MetaData portion, the guy drag-selects a bunch of images and says "...now, you'd THINK you could just enter some keywords for these similar images and have them stick... you'd be wrong. You have to use lift/stamp for that. For some odd reason."

How to apply List box for multiple selection of rows in ALV report ?

Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subash

hi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
   WHEN 'SLART'.
*is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara

The 'selected items' color randomly changes and I can't figure out why.

Hi everybody, I recently upgraded to Firefox 13, which appears to be the most stable browser version so far and I really like it. I have loved Firefox very much, having used it since somewhere between versions 2 and 3.
After upgrading to version 13 I noticed something that annoys me quite a bit. This may have been present before but I can't remember and I did not notice until now.
On my computer (Windows 7 x64 Ultimate) I have set the color of the 'selected items' (specifically text) to be lime green text on a slightly off black background. I chose this color scheme because it blends very well with Firefox itself (I have the NASA night launch theme), Windows Explorer, and many web pages that I have changed to a dark theme (using the Stylish browser extension). This color scheme has excellent contrast in areas with black text on a light background, as well as light text on a dark background. It has served me well.
After upgrading to Firefox 13 I have noticed that if the web page is dark with light text, the 'selected items' color changes to lime green text on a light grey background. (Less frequently, it changes instead to off-black text on a lime green background). I have not been able to isolate the threshold where this change occurs (meaning how dark the website background needs to be /how light the text needs to be for this to happen) nor have I found a solution.
This problem sometimes extends even to sites that have dark text on a light background: when tabs are switched, with no input fields clicked and the address bar is not clicked. This very page (Firefox support) is apparently vulnerable as well.
This problem only happens on rendered web pages. Firefox's menus, buttons and toolbars, as well as all other programs and Windows itself, are unaffected.
I want the 'selected items' to remain as I have set it, and not deviate regardless of the apparent contrast or color scheme of the web page being displayed.
[Edit #1]: Interestingly, as I was copying the information from about:support I noticed that it is affected as well.
Any suggestions? Thanks so much, and I am sorry for the long-winded description. tl;dr look at the pictures.
[http://i.imgur.com/vmLZ6.png selected items]
[http://i.imgur.com/d8xsa.png example1]
[http://i.imgur.com/2OE9J.png example2]
[http://i.imgur.com/1lhvb.png example3]
[http://i.imgur.com/UWOOp.png example4]

It is always best to avoid making changes to the selected text colors.<br />
Firefox uses an algorithm to check if the contrast is sufficient and will swap text and background colors if that test fails.<br />
*http://mxr.mozilla.org/mozilla-central/source/layout/generic/nsTextFrameThebes.cpp#3349
*http://forums.mozillazine.org/viewtopic.php?f=38&t=1331845

When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed

When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed with sync.

Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also k

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also know the sequnce is alt t, alt o, alt c, alt a, then ok, ok. Got to be a way to make a one key short cut for this. I use a black background to reduce eye strain, but about 10% of the webpage I go to can't be send with black so I have to go into tools and hit 6 or 7 things to chnage it then after through with webpage have to do it all over at Not allow webpages to have own color. Very very cumbersome.
== This happened ==
A few times a week
== made that way

https://addons.mozilla.org/en-US/firefox/addon/toggledocumentcolors-198916/
The above addon will solve your problem.
Shortcut to toggle user color/page color :- Ctr+Shift+C

Execution of infopackage by change in data selection without client open

Hi,
In BI Prd if we suppose to execute a infopackage manually by changing its data selection then how to execute with out opening client.
Regards,
Kiran

Kiran,
I think in your Production system infopackages are set to not changeble,
Make it Changeble then it works.
RSA1 --> Transport Connection --> Object changebility --> Infopackage --> from context menu choose --> comple changeble.
After this no need to open client. To do above changes may need to open client.
Hope it helps
Srini

Processing several images in a batch action to apply their individual auto camera raw auto setings individualy for each image selected.

Hi,
I have a folder with several images that I want to apply Camera Raw auto settings to all of then according to their individual parameters.
When you open a single file in Camera Raw you can click on the "auto" option to make an start point correction for that image.
I want to select all images in a folder and apply this procedure to every selected file without having to open every file individually and clicking in the auto option.
Can this be done from Bridge CC 6.1.0.116?
Appreciate comments on the viability of this task

kbarre wrote:
Auto Sync is functioning as expected, unless I choose Auto Tone first.
If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
Try this:
* do the auto-toning, then let it percolate for a while.
* then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
Better?
I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
Rob

Re: Applying a change to a selection in Aperture only changes one image

Similar Messages

Maybe you are looking for