RE: Approving supplement to an appropriation request which was already appr

Hi All
we will create an apropriation request with an initial budget and we will approve one of the different variants of the appropriation request....But in our business process we have to add supplements to the current appropriation requests every quarter ....And the supplements also have to go through the approval process( It is a requirement).....Can any one help me telling the different solutions. Pleaseeeee

Hi Ravi,
I saw your post and scenario 2 that you mentioned in your reply to Steve, is the scenario I am faced with. I would really like your input...
I want to be able to create a budget supplement using AR process and workflow, but instead of replacing the approver AR with WBS(measure) I want to allocate the approved funds to an existing WBS as supplement...
then do rollup and budget distribution...
can you please advice me?
thank you

Similar Messages

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

HT204088 So I put in my debit card info into my phone so I could redownload apps and while I was refreshing netflix (which was already purchased) it rebought itself twice and took $14 (USD). What can I do?

So I put in my debit card info into my phone so I could redownload apps and while I was refreshing netflix (which was already purchased) it rebought itself twice and took $14 (USD). What can I do? Someone please help!

Contact iTunes Support: http://apple.com/emea/support/itunes/contact.html.

Can we manually change the status of request which is already approved?

Hi,
we are using standard Record Working Time and approal ESS MSS Application.
can we change the status of request which is approved to not approved or released for approval?
(in our case, request released for approval is displayed on weekely basis in approval page and
on review page (approval) we have number of hours recorded for particular day in that week is displayed.)
the problem we are facing is,
user submitted data for a week and manager approved it.
but now we have to change the data entered for that week, only for a particular day and submit it again for approval.
we have changed the data for that particular day using HR-TSADMN. and submited it again for apparoval.
but this time only the record (particular day) which has been changed is shown in the approval review page of approval iview MSS.
but our client needs data of all the days in that week displayed.
can we get the approved + edited data for the week displayed on the review page of approval??
if can't, then if we change the status of the approved data for that particular week then the user can again submit the data for that week and data of all the days in that week will be displayed on the review page for approval.
plz help me.
Edited by: madhu1011 on Nov 30, 2011 2:23 PM

to change the status by user, he can modify the hours in the application and resubmit
For administrator purposes, you should cats_appr_lite, you can reject the all time and do it,
Do not make any changes directly to CATSDB< it might cause inconsistency
So better use standard transaction like cats_appr_lite or cats_da

Delete Request which is already updated to Futher data target

Hi Experts,
Is there any way that we can delete a request from infocube which is already updated in to another data target.
My requirement is i have PCA infocube which 3 full loads and 1 delta. I can delete the full loads by using delete overlap request process type. But from PCA infocube the data is futher updated in another planning cube as delta request to update the actuals.
This is causing the problem as the data is getting further update to another cube as a delta request i am not able to delete the overlapping request of full loads in PCA cube. Any ideas or suggestions would be a great help.
please note that i cant change the dataflow at this point as this cube is already in production.
Thanks,
RRRRR.

Hi R,
thanks for pointing this out.
I still think the procedure that I described would be suitable.
Let me re-capture: You want to delete the Full request in the Infocube, but you don't want to touch the data of this request that has been already updated in the planning cube.
1- Delete the full request in your infocube
2- Confirm the messages that this will lead to de-activating the delta to the planning cube (as explained previously)
3- Load your new full request into your infocube iif you want to
4- Set up the delta between Infocube and Planning cube again, by requesting an INIT w/o data
This way you will be able to change the data in the Infocube, but not impact the data that has already been updated in your data target the planning cube.
In case you want the new FULL request to be updated via a DELTA into your planning cube you have to swap the order of steps 3 and 4 above.
Hope that clarifies this approach to you.
kind regards,
Ralf

How to transfer a video which was already on sd ca...

How do i transfer videos which were already on my sd card into my photo album? I can only get them through the

Onedrive has a silly size restriction on video files (300MB the last time I tried). Can you see the video files if you connect the phone to a PC ? You can transfer from there.

Approval of Variants in Appropriation Requests

I require workflow for multiple variants for the same AR. It should be variant wise approval. When am creating the second variant and submitting it for approval I can not see the Approve Button, the system only shows Postpone Approval which is incorrect. Can any one throw light on this......

You are right. Assuming the first variant is approved and I could submit the second variant for approval only after putting the first variant in reject status. Now the second variant is created and I get to see "For Approval". I submit this one for approval and I dont see the "Approve" button coming up, instead it shows "Postpone Approval".
So there are two variants created. First one is in rejected status, second one is submitted for approval, when you see it display mode you see the "approve" button and when you go in change mode it shows up as "Postpone Approval".

I've a few issues, my old computer was out of memory and i changed to a new one which was already on another itunes account. When i upgraded to os5 my library has gone it has synced with the new computer - how do i restore the old ipad information? ple

I've a few issues, my old computer was out of memory. I changed to a new one which already had another itunes account (for my business) when i upgraded to os5 my library has dissappeared as it has syncd with the new computer. Is there any way i can restore the information previously from my ipad? really appreciate any advice thanx in advance

Lynda-
If you still have the old computer, you should be able to connect the iPad, run iTunes and restore from a backup from a previous sync. Now that you have it updated, you will not need to do that again.
Fred

Changing a customer exit variable in Step 2 which was already set in Step 1

Hello,
i have the following problem.
There are 2 BEx customer exit variables A and B.
Variable A is filled in Step 1 before the user dialog appears.
Variable B is determined in Step 2 in dependence of variable A.
Now i want to change variable A in dependence of user entry althoug it was already filled in step 1. Can i somehow force the variable manipulation in step 2 for a single variable wich has already been set in step 1?
Or is there a way to change all variables at once after they have been set e.g. in step 3?
Regards,
Alexander

Hello Alexander!
It's true: You cannot change values that were entered in step 1. It's a feature This is supposed to make sure that a value that was entered (or confirmed) by the user can never be changed by any piece of coding - customer or SAP. If that possibility existed, then that would create some real issues for reliability and also support.
What is your scenario that you are trying to solve? Maybe there's another way to do it?
Regards,
Christian!

I tried to update iOS in my iPad Air which was already downloaded in my pad. But when I tried to install it, my pad went to recovery mode and asking for iTunes. What to do now? I am trying to download iOS via iTunes MAC. Will it be cleaver?

ios 8 update in ipad air, went to recovery mode. Can't open it now!!!

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Closing the qty of PR which was already processed.

There are a PR of 1000 qty and user has done the PO, gr and IV of 100 qty.
Now requirement is to close the pr or change the qty for remaning qty(900),
bcoz its showing open qty and they don't want to use these qty.
There are many PR like that.
so there are any procedure to do it.

hi,
In addition to above...
You can use the close indicator given at the PR...
But ...
System will still allow you to make the PO referencing this PR...Although the open qty doesn't change....
So, i would suggest you to change the PR manually...
Regards
Priyanka.P

Re: Approving two plan variants in an appropriation request

Hi All
I have created a variant 01 for appropriation request and approved it. I want to supplement the same appropriation request with a new budget. So , I created a new variant , and assigned it to a new plan version...But the problem here is I was unable to approve the new variant...The approval button is grayed out...Can anyone help me out please...Why the system is not letting me to approve the new plan variant.

Hi ,
as I said variants are like quotations, so you have to maintain it...........
in case of rolling up plan values you have to select respective status profile before rolling up respective variant version or variant version range....... (IM34)
1. approved status profile...
2. created status profile..
3. released status profile...... like that
- give both CRTD & APPRD versions in IM34... select status profile for approved & roll up
then check in IM36 ...
Regards,
Venkatesh

IMA11: avoiding that an user can reject the appropriation request "created"

Hi All,
with reference to the t.code IMA11 (create/change an appropriation request),
an appriopriation request has the systen status "created".
I wonder if is possible to avoid that, for the appropriation request which has the status "created",
a certain user can choose the botton 'reject' in the tab "control data".
In PFCG, for the authorization object A_IMA_BUK I can't exclude that activity.
Coul anyone help me?
Thanks

Use Substitution for passing it from level 1 to below WBS:
Prerequisite:
PROJ-PROFL = 'ABC' AND PRPS-STUFE >= '1'
Substitute
PRPS-ASTNR = " A"
PRPS-VERNR = "B"
This will help for Person Responsible and Application Number.
However for Partner function you have to use Exit and wirte code.
Thanks
Sarang

Budget Supplement using Appropriation Request.

Dear Friends,
As per our business scenario, we have to create project thru Appropriation Request. In case the budget needs Supplement, that same is also needs to be mapped using Appropriation Request.
The system is restricting creation of further ARs for WBSE once it is assigned to IM Position.
Technically, system dose not seem to have provision of budget supplement to an already assigned project (to IM Position) using Appropriation Request.
My Question: Is there any setting or Workaround thru which we can Use Appropriation Requests to request for Budget Supplements for a Project thats already assigned to an IM Postion( after replacing Initial AR). ?
Regards,
Seemant

I feel that after replacing AR , as your project is assigned to IM postion. you can distribute the budget to project by IM postion only via IM52.
Because AR is made for management of the planning and approval phase of investments and other types of measures
And IMProgram & postion is made for cyclical planning and management of investment budgets for a number of measures, throughout your whole enterprise
If you knew that you want extra budget you can take care the same via planning additional cost on AR.
If IM Postion itself is not having sufficient budget than you can supplement there as well via IM32.
please refer this link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/2a/f9f405493111d182b70000e829fbfe/frameset.htm
Regards
Nitin

Number of Appropriation request submitted for approval

Hi Friends,
There are around 14000 appropriation request (AR's) are created in my system. And we have developed workflow for AR approval. And AR should be submitted for approval via only Control tab in IMA11 but some of the AR's are submitted via Variant Tab ( causing problem in work flow)
Now I would like to know the number of AR's which are submitted via variant tab. I can find out this by selecting AR's from IMAK table and then checking IMA11 for each AR but it is very time consuming.
Can I get the number of AR's submitted for approval via variant tab by using any table or any report available for this purpose.
Any pointers.
Regards
Ashutosh

The problem sounds more like a business area problem rather than workflow problem. From the workflow side you can look into the user who created the workflow but I'm not sure that would be helpful. What you might want to do is to check with your DB admin as they might be able to find out a way.

RE: Approving supplement to an appropriation request which was already appr

Similar Messages

Maybe you are looking for