Re: [b]creation of 10th Database on single pc[/b]

GREETINGS,
I need to create about 30 database on a single PC win 2000 pro sp1??
I am using Oracle 8.0.4 on Win NT and when i go through the database assistant wizard
I am able to create 9 data base successfully.
When i create the 10 database the service of 10 database is not seen in the oracle wizard (Oracle Database Asistant
i.e if i select the option modify database i see oracleservice orc9.and not oracleservice10.
In Windows NT i can see the database and its service.
So when i try to create again it tells me or10 database already exists....
I also chose the option of Custom database and rename the OR10 to OR11 but then it gives me an error of ORA -00301
"Error in adding logfile d:\orant\database\log3or10.ora"
ORA-01109..
I am using installer 3.3.1.2.4 on w2k pro
1) How can i overcome this and create more database??
thanx
Nayan

Use this forum for feedback about the OTN program and
problems with OTN accounts. Technical questions cannot
be answered here. Please post them in the appropriate
product or technology forum. OK?

Similar Messages

RE: Creation of two oracle database in Single ASM Disk group

IS it possible to create two oracle database in Single ASM Disk group. if it is possible how?.
Giri

All you have to do is to create a tablespace at the most minimumlevel and your db would become a client of the disk group. Other than that, you can migrate your db tothe disk group and it would be then start using the same disk group shared by another database for its use also.
HTH
Aman....

Report from Grid Control:Monthly Growth of each database in Single Report

Hi,I want to make the report from Grid Control for Monthly Growth of each Database for Capacity planning
I can See under Report->Storage->Oracle Database Tablespace Monthly Space Usage
But this is only for once database and I want to include all the database in single report that too with limited INfo
Want the format something like..just wanted to make you guys
Database Actual Size on 1st Actual Size on 30th INcrease in Size
1.
2.
Something close to above format will do...
Thanx
Gagan

Hi Thanx for the reply
But Which Tablespace Metric You are talking about?I can See 5-6 Tablespace Metric and infact I dont want the data at the tablespace level and I want the total size of the database and growth in last month as shown in ' Oracle Database Tablespace Monthly Space Usage '.
But Thanx again for the reply
Regards
Gagan

Report from Grid Control:Monthly Growth of Each Database on Single Report

Hi,I want to make the report from Grid Control for Monthly Growth of each Database for Capacity planning
I can See under Report->Storage->Oracle Database Tablespace Monthly Space Usage
But this is only for once database and I want to include all the database in single report that too with limited INfo
Want the format something like..just wanted to make you guys
Database Actual Size on 1st Actual Size on 30th INcrease in Size
1.
2.
Something close to above format will do...
Thanx
Gagan

Hi Thanx for the reply
But Which Tablespace Metric You are talking about?I can See 5-6 Tablespace Metric and infact I dont want the data at the tablespace level and I want the total size of the database and growth in last month as shown in ' Oracle Database Tablespace Monthly Space Usage '.
But Thanx again for the reply
Regards
Gagan

Rollback segment is filling up during creation of the database

Hi
The Rollback segment is showing around 520mb immediately after
creation of the database after following the wizard provided in
the enterprise manager of oracle. What might be the reason. How
to reduce it. Could any one give me a solution for this matter.
Thanks in Advance.

I tried creating the password file using the following command:
orapwd file=/home/oracle/product/9.2.0/dbs/orapwHR.ora
password=HR entries=5
and got the same error:
ORA-01501 Create Database failed.
ORA-01990 -ERROR opening password file '/home/oracle/product/9.2.0/dbs/orapw'
ORA-27037 Unable to obtain file status.
Linux error: 2: No such file or directory.
Additional information: 3.
Does anybody know how to fix this problem?
Thanks,
Katya

Creation of uninitialized database 87684942 failed

Hello,
we get this "Error Creation of uninitialized database 87684942 failed" if we try to make a Setup-Package under MI 7.0 SP 15 with MaxDB for Client persistance.
Our System is WebAS is NW 7.0 SP15 with usage type MI and AS ABAP and AS Java. MI is 7.0 SP 15. All on Win 2003 32-Bit with Oracle DB.
The MaxDB is 7.6 the newest Version. The Generation-Process function well till it tries to create the DB. We've changed a lot of things in Visual Admin for MaxDB without any better result.
Any suggestions?
Thanks in advance.

Hi Oliver,
thank you.
Maybe i have another Documentation, but this is written in the Docu:
Installing SAP MI on the Mobile Device
-Mobile Device Installation using Setup Packages
--Installing MaxDB for Setup Package Creation
---Installing MaxDB on a system where a different version is installed
---Installing MaxDB on a system with no MaxDB installation
I spend times on Installation and Setup that MI, cause the Help, Guides and Notes are so dramatically inconsistent. We can't download the DB2e from SAP nor either from IBM. Every Link is broken. If you be able to send me the DB2e we are very happy.
For a little explanation: This is my first time i use SAP MI. All work is for my diploma. So that is too much time consuming.
Thank you.
Regards

Multiple database in single server

Hi experts,
Please tell me how to configure multiple SID with single listener.
I configured the DR setup of two databases in single server. Now the problem is, if I start one listener from orapm1(CRM), my data is replicating only for CRM, and if I am going to start my listener from oraPE2 user (DBM), error is coming u201C listener is already startu201D but DBM is not replicating with DR site.
And when I stop the listener from oraPM1, and start listener from user oraPE2(DBM), my DBM is replicating properly, I want to start both in parallel with one listener.
Right now I have only one port for both database (1527) and only one LISTENER, should I need to change the port for one server e.g DBM (primary and standby), and then change in listener files. For both side (primary and standby)
If I am correct please let me know the steps, what precautions we need to take.
And what change I need to do in listener file.
2nd) Can I work on same port for both SIDs, if yes please tell me the steps.
My CRM is working properly so I need to change in DBM part.
I am attaching listener file from both users in same server (10.11.230.12)
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER_PE2 =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = PE2.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = PE2)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.11.230.12)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PE2)
(ORACLE_HOME = /oracle/PE2/102_64)
pm1 listener file
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = PM1.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = PM1)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.11.230.12)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PM1)
(ORACLE_HOME = /oracle/PM1/102_64)
Thanks in advance.

Dear Experts,
please tell me is it ok or i need to change something else?
this example is for only one listener, and i put both SID details in same LISTENER, or i need to change the listener name for another server. it is very confusing...
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = PM1.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = PM1)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = 10.11.230.12)
          (PORT = 1527))
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY =PE2.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = PE2)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = 10.11.230.12)
          (PORT = 1528))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PM1)
      (ORACLE_HOME = /oracle/PM1/102_64)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = ON
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PE2)
      (ORACLE_HOME = /oracle/PE2/102_64)
Rishi

Run two Database in single server

Hi...
I want to run two database into single server. For that I had created one another database.
But now I am not able to connect with two database at the same time.
When I am going to connect to another database i have to shutdown the first one.
Is it possible to connect and work on two database at the same time?
Thanks
pratik

You should have a good enough to have two or more instances running on the same machine.
The performance of a single instnace will always be better compared to having two or more instances on the same machine.
Is it possible to connect and work on two database at the same time?Yes
Here is an example
$ ps -ef |grep pmon
ora101AS 548928 1 0 Aug 06 - 0:31 ora_pmon_orcl
ora102DB 552974 1 0 Aug 06 - 0:36 ora_pmon_TEST
ora102DB 1380412 1 0 00:58:49 - 0:04 ora_pmon_LIVE
testuser 1613946 1691868 0 10:46:11 pts/2 0:00 grep pmon
Single machine having multiple instances
$ ps -ef |grep pmon
ora102DB 4086 1 0 Aug 06 - 1:39 ora_pmon_LIVE10
testuser 32848 31172 0 10:46:24 pts/0 0:00 grep pmon
Single machine having a single instance
The second machine performance is much better compared to the first machine that has mutiple instances.
Normally CREATE DATABASE is used by advance users while DBCA is relatively easy to use.
Adith

How to put database in single user mode?

hi
how to put database in single user mode?and what could be the impact of this to EBS R12 RUP 6.DB 10.2.0.0
rgrds

hsawwan wrote:
Hi,
Are you referring to restricted mode? If yes, please see these links/docs.
Restricting Access to an Open Database
http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/start002.htm#ADMIN11155
Note: 1059291.6 - How to Put a Database into Restricted Mode and Verify Restricted Mode
The impact is none of the users will be able to connect to the database/application (except for the sys user which can connect to the database). Usually, you would need to put the database in restricted mode when doing upgrade/migrate (i.e. you do not want to have active user sessions in the database during that time).
Thanks,
HusseinHi
i want to mean:
ALTER SYSTEM QUIESCE RESTRICTEDThe ALTER SYSTEM QUIESCE RESTRICTED statement may wait a long time for active sessions to become inactive. You can determine the sessions that are blocking the quiesce operation by querying the V$BLOCKING_QUIESCE view. This view returns only a single column: SID (Session ID). You can join it with V$SESSION to get more information about the session, as shown in the following example:
select bl.sid, user, osuser, type, program
from v$blocking_quiesce bl, v$session se
where bl.sid = se.sid;I suspect all apps user can.t login to db?
Edited by: new2appsdba on Aug 19, 2010 1:54 AM

*Synchronize two oracle databases in single database*

Hi Friends,
Is it possible to synchronize two database in single database.
Actually the scenario is, there will be single instance database with dataguard config...So this database will be used from two different locations/places .. the distance is around 1000 Km. If the user not able to log from second location because of network problem ... then seconday server ie datagaurd will become primary for the second location.
Then both the databasses will work as PRIMARY database for the two different locations. Once the network issue resolve then we need to sync the database to single database ...
Is there any solution for synchonize the database ...or any tool for this one....
Thanks in advance
Anil Pinto

Hi,
You are looking for a Bidirectional Replication.
Golden Gate Bidirectional Replication
http://vishaldesai.wordpress.com/2011/02/24/golden-gate-bidirectional-replication-oracle-to-oracle-example/
Oracle Streams
Oracle Bi-Directional Data Replication
http://www.databasejournal.com/features/oracle/article.php/3596971/Oracle-Bi-Directional-Data-Replication.htm
Regards,
Levi Pereira

Is it possible to create Dictionary Tablespace creation in 10g database?

Dear All,
Is it possible to create Dictionary Tablespace creation in 10g database?
regards,
DB.

Check this
How To create dictionary managed system tablespace in 10g R2

Error in creation of sample database during installation of Oracle8

I am trying to install Oracle8 for Intel Solaris8. Near the end of installation - running database configuration assitant, the creation of the sample database failed by an alert:
ORA-03114: not connected to ORACLE
I also tried to run database configuration assistant in custom mode separately, "ORACLE not available" message came up.
I think ORACLE should be connected and running before creation of the sample DB, like installation of Oracle in Windows.
Anyone has the same problem or can give me a help?
The Oracle(8.1.7) CD comes with Solaris8 (07/01) package.
Thanks.

I would guess that your kernal parameters have not been set. Check you oracle install guide for the appropriate additions to /etc/system for semiphores and shared memory segments. If you have not made these changes, the database will not come up.
...jcd...

Multiple Oracle databases on Single host

Hi Gurus,
I am new to SAP World. We are planning to install multiple SAP systems (ECC/BW/SRM/XI) on a single host with Oracle 11.2.0.2. As per SAP instguide, the Oracle RDBMS software should be owned by ora<SID>:dba. So we are planning to install the oracle software for the first dev system ERD under 'oraerd:dba' id. And the next will be under 'orabwd:dba' and the third under 'orasrd:dba'.
My questions is, instead of having multiple ORACLE_HOME's owned by individual id's, can I have one consolidated Oracle_Home owned by 'oracle:dba' which then controls all the oracle db's and its datafiles.
I know there is a SAP Note to do this for Oracle RAC (prd is being planned this way), but can we do the same for Single instance also.
Best Regards
Shiv

Shivaspo wrote:
Hi Orkun,
> Thanks for your reply. Its a must or its just better to have under individual O_H. The reason we were looking to out all under 'oracle' was that our DR site for the prod is going to be single instance physical standby using DG. SAP recommends to have the OS user on the DR host to be oracle, so that there are no issues with permissios for log shipping.
> So we will end up having multiple db's system running under 'oracl' on the DR site.
>
> -Shiv
Hi Shiv,
Technically, there's no restriction to configure your system, by this way. But from SAP point of view; at the first step, because the the installation is not completed as referred by SAP installation guide, you will not able to get support by SAP. For the instance, if you face with a problem during the productive, SAP may not support your installation.
Secondly, you may face with the problems at the database upgrades and applying patches. For example, you need to stop all the databases when you decided to patch one of them.
I can count many restrictions about this issue. As a summary, from technical way, it is possible to have one Oracle home, but it is strongly recommended to have different Oracle home folders for each Oracle installation.
Best regards,
Orkun Gedik

Creation of a database engine for mobile devices using j2me

am trying to develop a database engine for mobile devices.. it is to develop a miniature version of the DBMS that
can be deployed on a mobile phone..I have to develop my own code for performing tasks such a s creating a table,
inserting values into it, selecting from it etc..
I limited my self to develop the software so that it can perform 3 functionalities of create, insert,select..
I should be taking the details such as table name and its parameters from the user and then should be able to
create a suitable data structure for it(i tried to develop a class)...
Usage of RMS package helps me partially in this.. I did that and ll be doing that..
I got stuck while developing the code for creation of a table.. I am facing problems in creating a dynamic data
structure for a table and also to use such data structure else where in my project..
I need help in developing an algorithm for this..
I would be very grateful to u all if u help me out in developing the code for this project..

I'm sorry for the amount of time it took me to get back. Derby is an open source database written entirely in Java. I do not know if it can support resource constrained devices like MIDP compliant, but may work okay with CLDC.
But outside of Derby being a solution, let me give you a few ideas off the top of my head.
Set up a database server in a separate thread. This server will really be your controller for RMS access.
Since RMS is just a big sequential 'pipe' you will have to think of data as 'frames' - (starttable) (tableID) (tablename) (data) (tablename) (data).....(endtable).
When you need to write additional data, just append it to the end of the RMS object.
When you need to retrieve data, thing are more complex.
1. Read in all data, looking for your particular tableID. This may be made much easier using RMS filters - (I'm not sure, I've never used them)
2. Once start of table of interest is found, stick the data elements in either a java vector or array until you reach the table end identifier. I think vector will be a better choice - trust me. (I think its available in J2ME...)
3. Package this into a do while loop until the element you are searching for is read. If you need to do some sorts on the data or something else that requires the all the data to be present then you need all the data for that particular table. One thing will always be clear. The first data you grab will always be some start table identifier and the last data you grab will be an end table identifier. We just don't know which table because of how we put stuff in the RMS resource.
This provides you a few positives as well as negatives:
Positive:
1. Fast data writes, no need to search for a particular table before accessing it, nor do you need to search for an index in that table.
2. When looking for data, data may* be found without searching through the entire table. This is accomplished with RMS filters or logic test within the RMS read loop.
Negative:
1. Slow when all data of a table is needed (i.e. compute sums or averages of entries). The entire RMS database must be read to ensure all the entries are searched. An example of how this is a problem is as follows: You have 5000 entries in you RMS database resource and you are looking to compute the average of a value in some table. When you first wrote the data to the table, it was done sequentially and no other data for that table exist. But we can't tell if that's the case, so we have to read through all 5000 entries to make sure we looked for every piece of data.
Beacuse of this issue, this database structure, performance may be fine for 50K - 100K entries (depending on table element size), if the reading requirements don't force full data reads. Otherwise, 25K may be an upper limit.
I hope this helps.
Edited by: estarkey on Mar 17, 2009 9:15 PM
Edited by: estarkey on Mar 17, 2009 10:01 PM

Ora-12154 after creation of second database

DB 10g ver 10.1.0.2.0
OS Windows server 2003 32bit +sp1
Summary:
Due to the addition of extra storage to the server I decided to rebuild from scratch, and all was working correctly until I came to create a second database on the server, once this is created I get ORA-12154 errors at logon for both databases.
Full:
Installation of Windows and Oracle are fine, creation of the first database also works correctly and connection is without problems e.g sqlplus user/pass@database1 allows me to logon.
On creation of the second database the same command: sqlplus user/pass@database1 or sqlplus user/pass@database2 gives me an ORA-12154 error.
If in the command prompt window I set ORACLE_SID=database1 then try sqlplus user/pass it connects without problems, the same for database2, although sqlplus user/pass@database1 still fails.
I have checked tnsnames.ora, all looks fine, I used the net configuration assistant to generate the entries and used the connection test to verfiy all was ok, both connection tests worked fine.
I can tnsping both database1 and database2 and lsnrctl status shows
Service "database1" has 1 instance(s).
Instance "database1", status READY, has 1 handler(s) for this service...
Service "database1XDB" has 1 instance(s).
Instance "database1", status READY, has 1 handler(s) for this service...
Service "database2" has 1 instance(s).
Instance "database2", status READY, has 1 handler(s) for this service...
Service "database2XDB" has 1 instance(s).
Instance "database2", status READY, has 1 handler(s) for this service...
I have searched through back posts and the web and as yet have not been able to find how to resolve this. Any pointers or ideas as to why I cannot use the sqlplus user/pass@database to connect?
TIA
Will
.

Hi,
Thanks for the quick reply, I created the listener using the net configuration assistant, I assumed this would add all necessary configuration entries?
I have added an extra section as suggested to the listener.ora, it now reads
# listener.ora Network Configuration File: c:\oracle\product\10.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
     (GLOBAL_DBNAME = dm)
     (ORACLE_HOME = c:\oracle\product\10.1.0\db_1)
     (SID_NAME = dm)
    (SID_DESC =
     (GLOBAL_DBNAME = medline)
     (ORACLE_HOME = c:\oracle\product\10.1.0\db_1)
     (SID_NAME = medline)
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = c:\oracle\product\10.1.0\db_1)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = well-mccarthy02)(PORT = 1521))
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
)Is this correct, I have bounced the listener and still get ora-12154 errors on connection.
running lsnrctl services gives:
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 21-FEB-2006 13:28
:10
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=well-mccarthy02)(PORT=15
21)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "dm" has 2 instance(s).
Instance "dm", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:1 refused:0
         LOCAL SERVER
Instance "dm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "dmXDB" has 1 instance(s).
Instance "dm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: WELL-MCCARTHY02, pid: 1680>
         (ADDRESS=(PROTOCOL=tcp)(HOST=well-mccarthy02)(PORT=1505))
Service "medline" has 2 instance(s).
Instance "medline", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Instance "medline", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:1 refused:0 state:ready
         LOCAL SERVER
Service "medlineXDB" has 1 instance(s).
Instance "medline", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: WELL-MCCARTHY02, pid: 2804>
         (ADDRESS=(PROTOCOL=tcp)(HOST=well-mccarthy02)(PORT=1677))
The command completed successfullywith the original listener.ora file lsnrctl services gave
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 21-FEB-2006 13:36
:13
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=well-mccarthy02)(PORT=15
21)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "dm" has 1 instance(s).
Instance "dm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "dmXDB" has 1 instance(s).
Instance "dm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: WELL-MCCARTHY02, pid: 1680>
         (ADDRESS=(PROTOCOL=tcp)(HOST=well-mccarthy02)(PORT=1505))
Service "medline" has 1 instance(s).
Instance "medline", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "medlineXDB" has 1 instance(s).
Instance "medline", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER <machine: WELL-MCCARTHY02, pid: 2804>
         (ADDRESS=(PROTOCOL=tcp)(HOST=well-mccarthy02)(PORT=1677))
The command completed successfully

Re: [b]creation of 10th Database on single pc[/b]

Similar Messages

Maybe you are looking for