Re: Bluetooth Related Issues with Car kits regarding the Palm Pre Post 1.2.1

Make/Model:  Nissan Maxima
Year:  2007
Carkit Model info (Manufacturer, firmware version, etc):  OEM with Nav
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc) 
Since updating to webOS 1.3.5, the connect and disconnect problems have mostly gone away!  Thank you Palm! 
One minor complaint still with Bluetooth (if you are listening Palm):  The Nissan OEM kit supports up to 4 phones.  I paired my wife and kid's phones to the car, including my Pre.  When any other family member is in the car with me with their phone (non-Pre), my Pre will not connect to the car.  Their phones connect just fine even though my phone has been paired to the car to be the "primary" phone.  Only when I am by myself in the car will the Pre Bluetooth connect/disconnect work flawlessly.   Thanks again for getting us this far!
webOS version:  1.3.5

We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
If you are having issues around using Bluetooth with your Car Kit please post the information in this thread. 
Please also use this template so it is easiest for us to extract this data
Make/Model:
Year:
Carkit Model info (Manufacturer, firmware version, etc):
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
webOS version:
Included in compatibility list:
To find out if your carkit is listed on Palm's compatibility chart see here
http://kb.palm.com/wps/portal/kb/common/article/50373_en.html
Further information:
Please remove all previous pairing from both devices and carkits before deeming it an "issue." We attempt to diagnose and identify all issues, however some issues are simply resolved by removing pairing from both the device and the carkit and then resetting the connection back up.
It may be important to check back regularly. If it becomes an issue that we would like to diagnose further we may ask for help from the community by contributing log files from the device.
You may receive a PM from me or another Palm employee asking for this information (we can be identified by orange logo's next to the name).
Message Edited by HardBeatZ on 01-19-2010 02:36 PM

Similar Messages

  • Bluetooth Related Issues with Car kits regarding webOS post 1.4.0.

    We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
    If you are having issues around using Bluetooth with your Car Kit please post the information in this thread. 
    Please also use this template so it is easiest for us to extract this data
    Make/Model:
    Year:
    Carkit Model info (Manufacturer, firmware version, etc):
    Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
    webOS version:
    Included in compatibility list:
    To find out if your carkit is listed on Palm's compatibility chart see here
    http://kb.palm.com/wps/portal/kb/common/article/50373_en.html

    Make/Model: BMW 325I
    Year: 2006
    Carkit  Model info: Latest firmware for the 3-series.
    Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
    webOS: 1.4.0
    Included in compatibilty list: Yes
    It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

  • How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    Click here for the instructions on stopping the emails.
    (85713)

  • Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

    My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
    The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
    I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
    Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • Bluetooth connection issue with car stereo

    Hi,
    I have a N8-00, with the current belle software on it.
    With my car Bluetooth it will connect and function properly when I first add the device (N8) to the car Bluetooth, but if I turn the ignition off and then back on again it won't pair, if I try to manually do it, it just comes up with error without a code.
    Deleting the device and trying to re-pair it wont work unless I restart my phone, and I am unable to turn Bluetooth off on my phone until after restarting it.
    This is getting very frustrating. 
    Please help!!

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • Compatibility with Car Kit (CD-IB100 II Adapter- Pioneer)

    Hi, ive recently purchased a new ipod nano but ive been disappointed to find that it is not compatible with my car kit adapter, however the car kit is compatible with previous versions of the ipod.
    Can anyone advise if there is a possiblity of a compatibility connector that can be purchased to resolve these issues?
    Regards
    http://www.pioneer.co.uk/uk/products/25/38/301/CD-IB100%20II/specs.html

    I use the same adapter, had the same issue with my iPhone.
    The adapter is using the old way of charging which is the Firewire pins but all iPods from about 2007 all charge with the USB pins only.
    I did a search on the web and found a little converter you plug between the iPod and the cable which enables charging. There are different versions if you search, some also remove the not compatible message from the screen.

  • Best choice for a bluetooth car kit for the 4S?

    I want to add a car kit to my 2004 MINI I have the Aux in jack for the audio HK ans XM radio system that came with the car but the 2004 Nokia bluetooth kit that was installed when the car was new only worked with a 2004 Nokia feature phone and after I replaced that phone with a motorola phone in06 I have had to use a Jabla ear piece for hands free in the car... and with the new 4S I would like to fit a proper working bluetooth car kit I understand there is something new about how bluetooth is implimented in the 4S that is causing some problems with car kits.
    has a concesis as to what should be bought yet? if not if the smart thing to do to wait a few months?

    Chris,
              Please do not cross post across the newsgroups. We would very much
              appreciate it.
              There is a response to this message posted on the performance newsgroup if
              you're interested.
              Thank you so much!
              Michael Girdley
              BEA Product Manager
              Chris <[email protected]> wrote in message
              news:851ks4$auk$[email protected]..
              > Hi, I'm wondering what the best choice for a proxy server is on NT?
              >
              > Currently I'm running a 2 WL server cluster, but this will grow rapidly.
              If
              > all of the pages that I will be handling will be .jsp (with the exception
              of
              > 1 or 2 servlets), which is the best configuration (performance wise) to go
              > with?
              >
              > Should I use a Weblogic Servlet, NSAPI, or ISAPI to do the proxiing. My
              > guess was that IIS would perform the best on an NT machine and that it
              would
              > not be as large as a memory hog as Weblogic would be to simply run as a
              > proxy. Is there a significant amount of latency produced by the ISAPI
              > bridge?
              >
              > Any suggestions?
              >
              > Thanks,
              > Chris
              >
              >
              

  • Wacom or Bluetooth Mouse issues with most recent Beta??

    Wacom or Bluetooth Mouse issues with most recent Beta??
    All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
    I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…

    Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
    (I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several).

  • Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount

    Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount

    THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??

  • TomTom GPS app with car kit

    I just found out that the TomTom car kit has GPS hardware in the mounting bracket and that it will enable original iPhone users to have GPS functions using their original iPhone.
    The ad copy says it will "enhance the gps capabilities of the G3 iPhone." Does that mean that the original iPhone won't work as well with the TomTom, or that the gps in the car kit takes over and is better than the one built into the iPhone?
    Anyone using the TomTom app and kit with an original iPhone? Does it work well?
    I've got a TomTom One GPS, but if I can get GPS out of the iPhone, it's one less gadget to lug around.

    The TomTom Car Kit for the iPhone is compatible with:
    iPhone
    iPhone 3G
    iPhone 3GS
    Requires iPhone OS 3.0 or later
    http://www.tomtom.com/products/section.php?ID=939&Section=766&Lid=1&Category=2
    I use mine with a 3GS. Where I used to get periodic GPS dropouts, the car kit has eliminated them.
    TomTom also also sells a separate car kit sized for the iPod Touch (which has no built-in GPS).
    It should work fine with your original iPhone. Here is a YouTune video of an original iPhone using a Car Kit (the audio is in German). http://www.9to5mac.com/tomtom-iPod-touch-original-iPhone
    Here is another video of the iPod Touch using the Car Kit: http://www.youtube.com/watch?v=WMGfin40t3w&feature=fvw

  • I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

    I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

    Hi An Iphone user,
    If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
    How do I delete a message?
    To delete a message, tap and hold the message bubble, then tap More.
    Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
    After you delete a message, you can recover it only by restoring from a backup.
    Send messages with your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    - Brenden

  • Issue with displaying summary in the Page Bottom

    Hi Friends,
    I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
    I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
    If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
    for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
    But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
    Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
    Regards,
    Subbarao

    HI,
    Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
    Eg: Protect
    bottom
    text
    endbottom
    endprotect.
    Regards,
    Venkatesh

  • Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

    Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

    The "solution" is probably to increase your knowledge.  You've done good things.  Perhaps this article will educate you a bit more about location services.
    Basically, they can be very useful, but can cause a lot of iPhone use.  A major example is "Remind me to ... when I leave home."
    http://support.apple.com/kb/HT5594

  • Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

    Hi BC,
    I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
    To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
    Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
    This is causing us mayhem.
    We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
    Jo

    Hi there,
    The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
    What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

  • Exchange 2013 issue with High memory Usage on Mailbox server post SP1 update.

    So we have been chugging along fine since Feb 2 2014. 
    I performed a migration from 2010 from the UK to the US doing "incremental" mailbox moves. (get in contact with me if you want to know how. But we moved 400 Mailboxes averaging at 2gb a piece from the UK to the US, over the transcontinental link.
    & then the weekend of the final, had everyone & everything done by the end of the cutover weekend)
    Any woot.
    So I applied the 2013 SP1 a few weeks back, & have intermitantly been alerted to the memory spiking over 95%. For me (and for any exchange admin) when i get those types of alerts i drop everything & run to the nearest PC to see what is going on.
    Now the first & second time, it was an issue with logs filling up the drives, & my clean log script not running to remove any logs older than 30 days. But since then it has been legitimate 95%+ memory usage. 
    For the most part its been 95-97 max, with 1 or 2 times hitting 98. After some time, the memory does drop back down to 94.
    this is ....umm "fine" however it is becoming a nuisance, since most of the time it corrects itself. What i dont want to happen is get into the groove of saying "ah bah! its nothing" & letting it go.
    the server has 16gb of memory in it, it is the Mailbox server (CAS /Frontend is on a seperate server)
    below is a screen shot, so i know the Storeworker grabs whatever it feels like grabbing, however it does NOT EVER release memory.  I also see the NodeRunner.exe (2 of them)  is always around 900 almost a MB
    now if i could somehow get the first 2 Storeworkers to drop down to 900ish, then that should alleviate my memory issues. 
    what I am m looking for is some type of "magic bullet" to put my memory issues at ease..

    thats the problem & seems to be a misconception.
    Exchange NEVER releases the memory when other things need it.  As the users state in your thread you linked. (i came across that early in my search for a resolution). An example is if another admin & myself log into the backend server at the same
    time & begin clicking around opening things, etc..Memory will go to 100% which = No Buenos. 
    There are numerous post all over the internet from people who say it releases, but them 5 more comments to that 1 saying that it does not. 
    I know what the process's do, however it seems like the SP1 has increased memory usage, as typically the Store.exe would only grab about 900-1000. 
    in terms of the noderunner, once again i know its role, however we are now 2 months+ live on 2013 post migration, I do not think it is still indexing all those emails. 
    all DB's report healthy.
    Name                            Status  CopyQueue ReplayQueue LastInspectedLogTime   ContentIndex
      Length    Length                             State
    WBAC1\EXCHBE001                          Mounted         0         0                        
             Healthy
    WBAC2\EXCHBE001                          Mounted         0         0                        
             Healthy
    WBAC3\EXCHBE001                          Mounted         0         0                        
             Healthy
    WBAC4\EXCHBE001                          Mounted         0         0                        
             Healthy
    WBAC5\EXCHBE001                          Mounted         0         0                        
             Healthy

Maybe you are looking for