Re: Broadband cutting off when calls come through ...

My broadband cuts off when my phone rings, did not always happen only in the last 6 months

Welcome to this customer to customer forum.
To enable forum members to help you, could you please read the web page that is shown below, which asks you to do a few checks first, and has some helpful hints.
When you have done that, please follow the instructions at the end, and post the results here, so members can offer advice. Thank you.
Speed and disconnections
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

My iPhone 4 is out of warranty however I have always had problems getting cut off when calling and bad reception my provider has proved that their network is stable and suggested I contact apple

I have always had problems with my iPhone O2 network
It has always cut calls in the middle of conversations and reception has never being good
I spoke to O2 and have had new sim cards which have not helped
Any ideas

GregMayne wrote:
i figure it is the logic board. and no it has never been changed. yes i have the box, the code. i keep everything for situations just like these and somehow they still try to **** me over.
Do this.
Go to the Apple Support page and type in your serial number. When the screen comes up showing that Serial number having Applecare extended warranty take a screen shot of it or Print it out to a PDF file and then Print a Hard Copy of either of those things. Take that with you when you take your Mac in to be looked at.
Good Luck with the Lenovo. I hear they are the same quality as when IBM was making them. Personally I have always used Dell Business Class notebooks and have never had any problems with them. Still have one that is going on 11 years old and it still runs as good as the day I bought it, actually a little better because I've upgrade the CPU, GPU. RAM and HDD.

Why do i constantly get cut off on calls. I've had this problem with my 3GS, my 4S and now my iPhone 5. When the core functionality is Phone, i.e. the ability to talk, why can't Apple make the iPhone function as a Phone? is there an App for that !!

why do i constantly get cut off on calls. I've had this problem with my 3GS, my 4S and now my iPhone 5. When the core functionality is Phone, i.e. the ability to talk, why can't Apple make the iPhone function as a Phone? is there an App for that !!

Well, since you've had the same problem, with three different phones, that all use different size sim cards, it seems pretty obvious the problem is with your carrier/coverage & nothing to do with your phone or sim card.

When I get a call on Viber swiping the screen cuts off the call

Everytime I get a call on Viber I need to swipe the screen and enter my PIN to answer the call.
When I swipe the screen it imediatly cuts off the call.
Does anyone else have this problem?

Hi,
I'm an official representative from Viber. I'm here to help
Are you using iOS7?
If so, there is a way to swipe Viber's notification (specifically, and not the general phone lock), which leads you directly to your incoming call.
Otherwise, try opening Viber after you swipe open your phone, and see if the call is taking place.
Note that in general, iPhone's behavior is so that 3rd-party applications cannot override the iphone's lock and PIN (unlike regular cellular calls).
Does the problem persist?

Why iphone centre in malaysia always get cut off when i call.

i always get cut off when i call iphone centre on malaysia,
need explaination from centre.

so why are you asking us users? That makes absolutely no sense at all.

What happens when I'm on FaceTime on my iphone 4s and a phone call comes through?

I've been on FaceTime a few different times when another phone call (not FaceTime call) comes through. I've never tried to answer it. Does the caller hear anything different on their end? Will my voicemail still answer the regualr phone call? Does it notify the caller I'm on FaceTime? Will texts and/or iMessages come through while on FaceTime?

When you receive a phone call during a FaceTime you are prompted to End FaceTime and answer the call or Ignor the call.
If you Ignore the call the caller will be directed to voicemail. They will not know you are on FaceTime, and no messages will be sent unless you explicitly send one yourself.
If you choose to Answer the call FaceTime will end and the call will connect. The person on FaceTime will not know that your on a call now, again unless you explicity tell them. They may call back and you have the option to Ignore them. If you ignore them they get the "Mr. Smith i snot available for FaceTime" message.
If you need more help see:
http://support.apple.com/kb/ht4319

Beginning of audio cut off when using digital optical out

Hi all,
This is my first post here since switching to Mac earlier this year.
I'm having problems with the first second or so of audio being cut off when commencing playback using the Mac's digital optical out. This happens with any source of audio in a variety of different applications (e.g. video, iTunes, even system sounds for notifications and the like). I have used a mini Toslink to Toslink optical cable to connect from the Mac's audio out jack to the receiver of my digital speakers (Logitech Z906). Once playback has commenced, audio plays fine; it's just the very first second or so which is usually clipped.
The problem does NOT happen when using the built-in speakers. I've also noticed that if I unplug the cable from the receiver end (leaving it connected at the Mac end) I can see the red LED light shining the optical signal down the cable, but this goes out exactly 30 seconds after audio stops playing. If I start another audio playback within 30 seconds, there is no loss of audio at the beginning, but if I wait longer than 30 seconds (i.e. after the LED has gone out) I encounter the problems with the initial audio being clipped. I therefore suspect that this is an OS issue which is shutting down the digital optical out when audio is not actually playing (presumably to save power or something). I wouldn't have a problem with this if it actually worked properly when audio playback recommences, but it seems that there is a slight delay whilst the optical out service 'wakes up' again and this is leading to the clipped audio.
I've done some searching of the internet (and these support communities) for this problem and there seems to be little information about it. It does seem to affect a few other people though and some have resorted to third party applications or scripts which play silent audio at regular intervals to keep the optical output running permanently (e.g. SoundStay (https://www.macupdate.com/app/mac/39833/soundstay) - no longer maintained and the download link is dead). However, these amount to a kludge at best which treat the symptoms rather than the underlying cause, which I would rather resolve.
I tried to log a support case with Apple in order to have them call me, only to have the system tell me that my support has already expired, despite having purchased the Mac only 4 months ago. It seems that my Apple One-Year Limited Warranty is actually only 90 days when it comes to telephone support. So here I am!
Does anyone else have this problem with optical out, and how can I resolve this? Any help would be gratefully appreciated.
Thank you.

Hello kcore66,
Would it be possible for you to upload one of the files in
question so that I can take a look. In Captivate 1.01 there is an
intermittent problem where sometimes the audio is either cut off or
just doesn't play when you publish / preview. To get around this
simply moving the audio object back and forth along the timeline
and then positioning it back in it's original position works 9
times out of 10.
HTH
Regards,
Mark

How can I fix my phone's ringer? The call comes through but it won't ring.

I've had my iPhone for over 6 months now with no issues. I have not had it reserviced, its not refurbished, and I bought it new from an AT&T store.
This week my phone stopped ringing. The incoming call comes through on the screen, but it doesn't ring out loud so I know I'm getting a call and I can't sit and stare at my iPhone's screen all day long to see if I'm getting an incoming call. It vibrates when a call comes in maybe 20% of the time.
Today I went into settings and reset my settings but it still didn't bring my ringer back. It plays the ringers when you are looking through the list of ringers, it plays it when you alter the volume setting, but when a call is actually coming in or when I'm receiving a text message or something, no sound.
What can I do to get my ringer back?

Check the mute switch on the side above the volume rocker. If the red dot shows, the phone is muted. You'll still be able to play the ringtones to select one.
I find that the switch can be thrown to "mute" by accident when I put my iPhone in my belt holster.

Toshiba Portege S100-S1133 Laptop - Intenet (Cable or Wireless) cuts off when phone rings

Toshiba Portege S100-S1133 Laptop, Intel(R) Pentium(R) M, processor 1.73GHz 795MHz, 512 MB of RAM. Internet (cable or wireless - COMCAST service) cuts off when the house phone (AT&T service) rings. The HP Laptop in the house doesn't have this problem. COMCAST can't fix the problem.

The only way to fix the problem entirely is to not have any 2.4GHz cordless phones in the house. You can try to change the wireless channel on your router but it probably won't be far enough from the 2.4GHz phones to help. I assume when you say it shares internet you mean that your home computer is connected in the back with ethernet and that is why the internet stays up on it. Your MBP connects wirelessly so it disconnects when the phone is in use.
Go to 192.168.1.1. Log in by leaving username blank and password is admin. [Follow these instructions|http://www.tutorial5.com/content/view/155/79> to change anything you need to (such as if you have unsecured wireless). Click wireless and under basic wireless settings you probably have channel 6 by default. Try channel 1. (Though you can also get into problems with wireless networks of neighbors interfering so download [Airport Radar|http://www.apple.com/downloads/dashboard/networking_security/airportradar .html] and try to avoid channels that are nearby).
As I said the only solution is not using 2.4GHz phones.

Have an iPhone 5. Phone does not ring when calls come in and texts sent from non-iPhones are delayed by 4-5 hours before receiving.

Have an iPhone 5. Phone does not ring when calls come in and texts sent from non-iPhones are delayed by 4-5 hours before receiving.

This morning I woke up thinking that I should turn off my iPhone and then call it from a land line. If the problem is the network then there would be a delay before I heard ringing.
I turned my iPhone off and called it. Right away I heard my message.
I turned my iPhone back on and called it. It rang right away!
So, did Virgin Mobile fix the problem or did turning my iPhone off fix the problem?
I don't know, but I'll take either. I do know that Virgin Mobile said it would be four days to check the problem. Did the problem get fixed yesterday when the four business days were up. I do know that I've had my iPhone on for a long, long time. Did upgrading to 6.1.1 or 6.1.2 cause the problem and turning my iPhone off reset my iPhone?
If you have delayed ringing problem and turning your iPhone off and on again resolved it, please post a note here.
P.S. I did call Virgin Mobile and its records show the investigation is still open. I hope my points get passed on to the investigators.
P.P.S. Reading my notes, I had turned my iPhone off and on last week. Maybe it's all the phase of the moon.

Titles get cut off when playing after the burn

The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
Any help is appreciated.

You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

Characters are cut off when they don't fit in the pdf report output.

Hi All,
I understand that Forms 6i and Oracle 9 iAS have been de-supported for years. Meanwhile we do still run a small application in the 9 iAS environment.
We have forms and reports running on Windows 2000 server, I am able to successfully clone the same 9 iAS from Windows 2000 to a Virtual Server Windows 2003 x32 and all runs fine, the only problem is that the fonts in the pdf reports are larger in the new Windows 2003 environment as compared to the original Windows 2000 and characters are cut off when they don't fit in the pdf report output in 2003 env.
Any advice is most appreciated.
Thanks.

You may want to check on the printer driver and paper size selected

Bottom margin gets cut off when I try to print

bottom margin gets cut off when I try to print

Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
Also go to HP and check if there is a newer printer driver if yours has some years on it.
I hope this will help you

I have layed out a site with 2 rectangles (one on top of the other) in the footer and the one is being cut off when I publish the site

The depth of the rectangle is fine when I view in muse but only cuts off when published

Hello,
Issue is because of the text box in the middle of the rectangle (In MAIN Master page), Please increase its width and then try to preview it.
Please take a look at the screenshot. I increased it to 311 px and its working form me.
Please take a look at the screenshot for better understanding.
Regards
Vivek

Re: Broadband cutting off when calls come through ...

Similar Messages

Maybe you are looking for