Re: Broadband only works properly after 2am

yep greedy bt sell more bandwidth than they actually have. leaving us like me
this is my 22:00 speed
 Download speedachieved during the test was - 1.07 Mbps <-- THIS IS ACCEPTABLE TO BT (what a joke) i pay for 8mb but now get 1mb
 For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
 Additional Information:
 Your DSL Connection Rate :8.1 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
 IP Profile for your line is - 7 Mbps
11pm i will probably be back up to 6mb but i race online with my mates at 7pm to 10pm well i use to and is why i declared war on BT
SLOW SLOW BT CONGESTED EXCHANGE THAT I SEEM STUCK WITH HOWEVER AT PEEK TIMES WHEN I HIT A VERY SLOW 1MB ON MY BT LAND LINE THAT COST ME AN ARM AND A LEG I CAN JUST DISCONNECT FROM IT AND CONNECT TO NEXT DOORS VIRGIN MEDIA UNSECURED D-LINK ROUTER AND GET A 2.6 CONNECTION. HOW ???????????????????? AND WHY????????????????? IF ITS CONGESTED HOW IS THAT EVEN POSSIBLE OR DO VIRGIN PAY BT A **bleep** LOAD OF MONEY.

When i moved into my home last year May i had 7.8mb and was paying for 8mb so i was a happy chappy, But they have just finished building 35 new homes in my village, As them homes sold, my broadband was getting slower and slower.
I never noticed the decrease in speed until other gamers complained that i lagged due to slow broadband so i did some speed test and was horrified to see such low figures. i can't race in simulator league rooms now due to this slow bt speed.
BT say the acceptable rate for my line is 0.6 to 7.15.
0.6mb would be a 60k max download rate and you would get that or very near to it with a 512k connection that would cost you a lot cheaper than a 8mb connection.
Why end up like me and pay for 8mb when your only get 2mb. you may as well just get their 2mb package.
BT are happy with their service to you as long as you are getting over 0.6 even if your paying for 8.0mb
Here are my bt test results for tonight.
No need to reply to this post john45 or imjolly or any other pro BT poster.
1. Best Effort Test: -provides background information.
Download  Speed
2.18 Mbps
0 Mbps
7.15 Mbps
Max Achievable Speed
 Download speedachieved during the test was - 2.18 Mbps
 For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
 Additional Information:
 Your DSL Connection Rate :8.1 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
 IP Profile for your line is - 7 Mbps
If you wish to discuss these results please contact your Broadband Service Provider.
If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
Your test has completed please close this window to exit the performance tester.
Please visit the FAQ if you are unable to understand the test results.
SLOW SLOW BT CONGESTED EXCHANGE THAT I SEEM STUCK WITH HOWEVER AT PEEK TIMES WHEN I HIT A VERY SLOW 1MB ON MY BT LAND LINE THAT COST ME AN ARM AND A LEG I CAN JUST DISCONNECT FROM IT AND CONNECT TO NEXT DOORS VIRGIN MEDIA UNSECURED D-LINK ROUTER AND GET A 2.6 CONNECTION. HOW ???????????????????? AND WHY????????????????? IF ITS CONGESTED HOW IS THAT EVEN POSSIBLE OR DO VIRGIN PAY BT A **bleep** LOAD OF MONEY.

Similar Messages

  • Broadband only works properly after 2am

    Hi all,
    I am having trouble with my broadband again.
    i cannot play online games until about 2am because of latency/lag/delay
    also bt sport keeps buffering and disconnecting
    i thought this was fixed last time we had an engineer to switch the lines but its come back again
    another thing ive noticed the broadband sometimes disconects when the phone rings
    and ive never had a connection over 11 days.
    i really want this sorted as FTTC is coming in may and it will surely effect that too?
    thanks in advance

    Yes sorry my mistake!
    I have tried this and yes it does still disconnect but its not everytime it seems completely random ive also used a wired phone
    I had an engineer a few months back and it fixed the problem for a week or so
    he moved us onto a different line
    its like something seems to build up and gradually get worse
    im worried if I get fibre this will continue,it seems like a intermittent fault as my tests and stats are fine
    Line state:
    Connectedppp0_0
    Connection time:
    3 days, 22:26:31
    Downstream:
    6.586 Mbps
    Upstream:
    984 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    10.0 dB / 6.2 dB
    Line attenuation (Down/Up):
    39.6 dB / 22.9 dB
    Output power (Down/Up):
    20.3 dBm / 12.8 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    8503 / 907
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    29414 / 4753
    Error Seconds (Local/Remote):
    11408 / 27022

  • Safari: Only works properly after reset. Why?

    I am using Safari Version 5.0.5 (6533.21.1) on iMac OS X Version 10.6.8 (Snow Leopard) 3.06GHz Intel Core 2 Duo - 4GB 800 Mhz DDR2 SDRAM.
    When I open Safari the homepage loads but if I try to click on ANY link or search in the address bar the spinning colour wheel (of doom) appears and will remain indefinitely. My only option is to FORCE QUIT. However if I open Safari and immediately RESET SAFARI via Safari Menu, it works fine and I am able to click and browse as normal.
    I have deleted the entire app using APP CLEANER, downloaded and reinstalled it but the problem remains. Any help would be very much appreciated.

    @Eric I am reluctant to try the DISK UTILITY as I have no idea what to do nor do I have the CD with me at this present time. Is this a common way to fix problems such as this?
    @Juan No problem with Chrome, I don't have firefox.

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • Aluminum Wireless Keyboard not working properly after Firmware update 1.1

    Hi,
    Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
    I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
    Thanks in advance.
    Franco.

    I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
    Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
    Steve

  • ITunes / iPhone not working properly after newest update...

    iTunes is not working properly after the newest update...  It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store.  Anyone have a solution or an explanation?  I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works.  Everything was working fine until iTunes and the new ios were installed.  After that it all went to crap.  Thanks, Randy...

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • My Iphoto does not work properly, after downloading Mavericks.  How can I fix it ?  loading Mavericks

    My Iphoto does not work properly after downloading Maverick. How can I fix it ?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Asha 501 : Whatsapp not working properly after 14....

    Hi,
    whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
    Looks like memory problem after the new  updates or anything else?

    Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
    Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

  • 2008 Macbook pro left click not working properly after upgrading to 10.6.8

    I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
    Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything.  I have tried plugging in a mouse, but when I do so the mouse also behaves the same way.  The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
    I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
    I tried deleting  com.apple.driver.AppleBluetoothMultitouchTrackpad.plist   and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
    Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

    I started having the same issue after update.  I'm on a MacBookpro running 10.7.2
    ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working.  Two days later problem was back.  I then did a reboot and the computer was back to working.  Today the computer worked fine tell it went to sleep.  I had to do a hard reboot to get the Mac up and running and now no left click.  Please help. I can not use the Mac  with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working.  One other item when you go to pick your user at startup the left mouse click works.  Help!

  • How to make Windows Update work properly after a fresh XP Home Installation

    1. Set up Boot Camp 60 gig partition.
    2. Install full copy of Windows XP SP2 on the Boot Camp partition.
    3. Using the OSX Disk, Install the Boot Camp 2.0 Drivers for Windows.
    4. Download the Boot Camp 2.1 Update from apple.com and install it.
    5. In Windows, run the Apple Software Update.
    6. In your Windows systray, you probably have notice of "automatic software updates". Install them from the systray notification and they will install correctly.
    7. Now manually visit Windows Update. You can view all available updates but if you try to actually install any updates this way you will hang immediately at the "Downloading" status. No actual download even starts.
    This problem will persist across reboots, etc. It will occur if you try to upgrade from Windows Update to Microsoft Update, and even if you then uninstall Microsoft Update and go back to Windows Update.
    The only action that corrects this problem is to perform the following steps:
    1. In Windows, choose Start > Run and enter "msconfig".
    2. In the MS Configuration utility, choose to restart Windows in diagnostic mode. (You must perform the following step in diagnostic mode or some of the files you need to delete will be locked by some running service or whatnot.)
    3. After Windows comes up in diagnostic mode, open the C:\Windows\Software Distribution. Delete everything inside that folder (but not the folder itself).
    4. Run msconfig again and select to restart Windows in normal mode again.
    5. When Windows comes up in normal mode, it recreates the entire default contents that you just deleted in the previous step, and Windows Update will now work properly.

    I kept running into this same problem with Windows Update every single time I restarted into Boot Camp from the OSX side of things. (System Preferences > Startup Disk > select Untitled > Restart.)
    I could clear the problem every time by rebooting (while in Boot Camp) into Diagnostic mode, clearing the contents of the C:\Windows\Software Distribution folder, and then restarting back into Normal mode.
    On a hunch, one time I did not bother with the above steps, but just restarted Windows (Start > Shutdown > Restart). Whaddya know? That worked to clear the problem with Windows Update too!
    So at this point I think the root cause of the problem is something about Boot Camp itself, particularly when you first switch from OSX over to your Boot Camp partition. It is 100% repeatable that Windows Update will run and find your various uninstalled updates, but if you try to actually download any of them, the process will hang right at the start of "Downloading".
    Simply shutting down and restarting Windows while already in Boot Camp solves this problem completely.
    It's also interesting to note that if you use VMWare Fusion to run a VM of your Boot Camp partition you do not have this problem at all. Windows Update will run perfectly each and every time you run your Boot Camp version of Windows under VMWare Fusion. You only need to do this restarting of Windows if you are actually in Boot Camp.

  • Calendar not working properly after software upgrade

    Today I upgraded my touch software to version 4.1 (8B117). Since this upgrade, the calendar doesn't work properly. Before the upgrade this is the scenario: I would go into my Calendar (synced with my gmail calendar) in "List" view. There was always a brief pause where the calendar would refresh. The screen would go white for a second and the "List" view would reappear. After the upgrade, I see the same refresh but the screen stays white. It won't display my calendar in "List" view anymore... unless I click on either "Day" or "Month" view and then back to "List". Anyone else experiencing this? I don't know if the upgrade is the reason but that's the only thing that changed today so I'm very suspicious.

    Not sorted on mine,
    Dates are added at random, so are times, i.e. a item in outlook 2010 is set for 09.00am on the 16 dec 2010.
    the date will come up as 14.35pm 20 dec 2010 on the ipod. This also occurs with repeated items, weekly, monthly and annual. as a % its about 5/15% of all appointments but they are the ones that matter most.
    Things I have tried to resolve this include the following,
    I have reset the ipod with factory settings, I have deleted All dates in outlook then synced to ensure all dates have been deleted, I have also tried the above and then reflashed the update before re syncing them.,
    Selected replace items on next sync button in itunes 10.1.0.54
    put repeating dates in and they have All been date changed and hours changed at random. BUT not changed in outlook on re-syncing. I know that the database is fine as I have also synced with an Android phone and a Win Mobile 6.5 phone and the dates Have correctly entered in both devices.
    Some of the dates have changed by as much as 9 days, the hours by minutes up to 16/17 hours.
    Ipod details, 32Gb at present 24Gb free so not a space issue...
    The ipod touch has been updated with 4.2.1 (8C148) Running itunes 10.1.0.54
    settings in ipod are for location london, in general and also im mail.
    (factory reset not upgraded and also tried on 2 computers running win7 pro 1 x32bit 1x64bit)

  • Applications not working properly after updating t...

    After eventually updating to symbian Anna, I've noticed that some applications are not working properly, notably AccuWeather and Facebook. Uninstalled AccuWeather and re-installed it but still didn't work . Seems pointless releasing a software update and then to discover that applications from Ovi store won't work on your device! With Facebook I can only login in to my account but when I go to view a friend etc, it shuts down. 
    Has anyone any suggestions or solutions to the problem?
    Thanks

    i updated to the latest version 025.007 on my E7 too and a lot of the apps on the store dont work. Just blank screens.
    Somebody do something!!
    I use other devices, and havent faced this problem with any of them after an upgrade!

  • Plug and play speakers not working properly after upgrading to Windows 8.1

    After upgrading to Windows 8.1, my plug and play speakers do not work properly.  I have uninstalled and reinstalled them, and restarted.  When I try to play music, nothing comes out.  If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound.  They worked fine until I upgraded to Windows 8.1.  The manufacturer has not been able to successfully assist me.  Has anyone else reported a similar issue after upgrading OS software?  Any suggestions?  These are fairly new speakers, less than 2 years old, and not used very much.  I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard).  Any suggestions would be greatly appreciated.

    @sisboldt ,
    Hello and thank you for posting on the HP support forums.
    So that I can better help you with your sound issue.  Please post back with your full model and product number.  Use this link to help you find the information.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Here is another link you may find useful.  Please give it a read before posting back with your system information.
    Advice for asking the "Very Best Question"
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • IPod Touch Not Working Properly After Front Screen and Housing Replacement

    So my son left his iPod Touch 4th Gen on my back bumper and it fell off out in our dirt/gravel driveway.  I finally found it, 7 days later, run over multiple times.  Front screen and back housing were demolished as you can see, but it still worked fine (except rear facing camera was done).  Ordered the rear camera, front screen and back housing assemblies off eBay from reputable sellers.  Took it all apart and reassembled it. Bada bing! Everything was working fine: camera, speakers, touch screen, wi-fi, all of it, for about 2 days .  It went from working perfectly, to being kinda glitchy (had to hold home and power to restart), to not turning on at all.  I read somewhere that if you don't clean all metal to metal contacts, it may interfere and not work properly, so I just took it (almost) all apart again, cleaned the contacts, and it turned on and was working, but this time only for about half an hour.  I've held down the home and power buttons for long periods of time, which sometimes got it to work, but now is not working at all.  Any ideas on what might be going on??? Is the screen bad?  Did I maybe miss a metal to metal contact (e.g. the power button, ribbon cable)?  Any really important ones that you can tell me about?  I really don't want to take it into the Apple store, but if I do, any ideas on a ruff guesstimate on what it's gonna cost me?  Thanks for any help!  I really appreciate it, I'd love to get this thing working for my 7 year old so I can have my d*** phone back!
    Before
    After
    (my kid scratched up the back already, gotta love it)

    Take it to somebody with more experience fixing iPods. Could be various causes.

Maybe you are looking for

  • How to extract the smtp response code

    Hi, I am trying to get the server response by SMTPTransport.getLastServerResponse(), and getting the response as "250 2.0.0 OK 1201842889 c39sm4983397anc.25", in case of success. This response would differ in case of failure. Could please guide me as

  • Aging AR / AP based on AR / AP account code

    Dear All, when running selection criteria either for customer receivable and vendor payable aging, is it possible to filter them based on their AP / AR G/L account code ? many of the customers have two AR G/L accounts code, e.g. in year 2006, the cod

  • Update Fields Size and Color in MARA table

    Hi gurus, I would like to ask what functionalities like BADI/BAPI/FM or any solution that can be used to update/populate records for SAP Std fields in MARA? There are no values on these fields. COLOR_ATINN SIZE1_ATINN SIZE2_ATINN COLOR SIZE1 SIZE2 Th

  • STATUS_SHOW_CHANGE_DOCUMENTS -export

    I have a requirement to get the status details -service order and notification also. Can I use the function module STATUS_SHOW_CHANGE_DOCUMENTS I can get the Service order no from AUFK and object no and passing input as object no for the above Funtio

  • How to attach two maintenance views to one transaction codes

    Hi I have created two master Ztables and also created two maintenance views in SM30 for them. Now my req is i have to attach these two maintenace views to one TCODE only Not two transaction codes. How i can do that. Pls give me some inputs. Regs Mana