Re: Bug: Cross Connection Query not working

hello
i am using vers. 4
and i cannot get BRIDGE to work
i have posted more on this here
BRIDGE command in Oracle SQL Developer - Stack Overflow
i would be most grateful for any help

Hi Smachin,
Thanks for the heads up.
Its busted due to a change in how SQL Developer loads components. BRIDGE being a migration component, it doesn't load until a migration action is performed (like Copy to Oracle or opening the Translation Scratch Editor).
Quick workaround: Start SQL Developer, Tools > Migration > Scratch Editor. Now when you open a worksheet the BRIDGE command will be recognized.
Note I think there was some work recently on BRIDGE so SQL Dev 4 EA2 should be used.
Ill work making BRIDGE work without having to do anything special.
Thanks,
Dermot.
SQL Developer Team.

Similar Messages

Bug (?) with Corporate Connectivity is (not) Working check

Noticed something odd. In situations where:
Direct Access client is offsite
their Internet access is via WiFi
they first have to enter their access credentials through a web-based captive portal before access is granted
then the Corporate Connectivity Check process malfunctions. Have seen cases where, after accessing the captive portal and being authenticated, Internet access works on the client. Direct Access then connects successfully. This is confirmed
on the server console, showing the client connected and the user credentials used. The client is able to access internal resources just fine (e.g. network drives on file servers).
But on the client itself, it still says Corporate Connectivity is Not Working. The WiFi icon is showing an exclamation mark. My belief is that this is caused by the client's inability to access Microsoft NCSI servers in a timely fashion.
So it looks like the corporate connectivity checks are dependent on Microsoft NCSI checks.
Can someone at Microsoft please look into this, as it is confusing our users (not to mention us guys in IT who have only just discovered this odd behaviour!).

Hi Steven !
Thanks a lot for your guidance !
After I followed the steps, I found that the time out occurs when trying to resolve the internal domain name.
The Windows Firewall was enabled on all profiles ( active on the public )
There were no IPsec sessions established in the Security associations tab, so I enabled the audit policy of the IPsec as per your instructions.
There is reoccurring error in the Security log :
Date:          10/8/2014 10:08:49 AM
Event ID:      4653
Task Category: IPsec Main Mode
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      MyW8Client
Description:
An IPsec main mode negotiation failed.
Local Endpoint:
Local Principal Name: -
Network Address: MyW8Client_Ipv6 address
Keying Module Port: 500
Remote Endpoint:
Principal Name:  -
Network Address: MY_DA_Servert Ipv6 address
Keying Module Port: 500
Additional Information:
Keying Module Name: AuthIP
Authentication Method: Unknown authentication
Role:   Initiator
Impersonation State: Not enabled
Main Mode Filter ID: 180987
Failure Information:
Failure Point:  Local computer
Failure Reason:  Negotiation timed out
State:   Sent first (SA) payload
Initiator Cookie:  9e636863e513b367
Responder Cookie: 0000000000000000
As far as I understand - the connection can not be established due to certificate error, which in my case is strange since my DA configuration is set to not use computer certificates, only Kerberos.
I will keep digging but any additional tip/advice will be appreciated!
Thanks again, Steven!
P.S. Just noticed that the Event ID 4653 produce two types of "Failure Reason" - apart from "Negotiation timed out" I also get "No policy configured"

Oracle date parameter query not working?

http://stackoverflow.com/questions/14539489/oracle-date-parameter-query-not-working
Trying to run the below query, but always fails even though the parameter values matches. I'm thinking there is a precision issue for :xRowVersion_prev parameter. I want too keep as much precision as possible.
Delete
from CONCURRENCYTESTITEMS
where ITEMID = :xItemId
and ROWVERSION = :xRowVersion_prev
The Oracle Rowversion is a TimestampLTZ and so is the oracle parameter type.
The same code & query works in Sql Server, but not Oracle.
Public Function CreateConnection() As IDbConnection
Dim sl As New SettingsLoader
Dim cs As String = sl.ObtainConnectionString
Dim cn As OracleConnection = New OracleConnection(cs)
cn.Open()
Return cn
End Function
Public Function CreateCommand(connection As IDbConnection) As IDbCommand
Dim cmd As OracleCommand = DirectCast(connection.CreateCommand, OracleCommand)
cmd.BindByName = True
Return cmd
End Function
<TestMethod()>
<TestCategory("Oracle")> _
Public Sub Test_POC_Delete()
Dim connection As IDbConnection = CreateConnection()
Dim rowver As DateTime = DateTime.Now
Dim id As Decimal
Using cmd As IDbCommand = CreateCommand(connection)
cmd.CommandText = "insert into CONCURRENCYTESTITEMS values(SEQ_CONCURRENCYTESTITEMS.nextval,'bla bla bla',:xRowVersion) returning ITEMID into :myOutputParameter"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.ReturnValue
p.DbType = DbType.Decimal
p.ParameterName = "myOutputParameter"
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion"
v.Value = rowver
cmd.Parameters.Add(v)
cmd.ExecuteNonQuery()
id = CType(p.Value, Decimal)
End Using
Using cmd As IDbCommand = m_DBTypesFactory.CreateCommand(connection)
cmd.CommandText = " Delete from CONCURRENCYTESTITEMS where ITEMID = :xItemId and ROWVERSION = :xRowVersion_prev"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.Input
p.DbType = DbType.Decimal
p.ParameterName = "xItemId"
p.Value = id
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion_prev"
v.Value = rowver
v.Precision = 6 '????
cmd.Parameters.Add(v)
Dim cnt As Integer = cmd.ExecuteNonQuery()
If cnt = 0 Then Assert.Fail() 'should delete
End Using
connection.Close()
End Sub
Schema:
-- ****** Object: Table SYSTEM.CONCURRENCYTESTITEMS Script Date: 1/26/2013 11:56:50 AM ******
CREATE TABLE "CONCURRENCYTESTITEMS" (
"ITEMID" NUMBER(19,0) NOT NULL,
"NOTES" NCHAR(200) NOT NULL,
"ROWVERSION" TIMESTAMP(6) WITH LOCAL TIME ZONE NOT NULL)
STORAGE (
NEXT 1048576 )
Sequence:
-- ****** Object: Sequence SYSTEM.SEQ_CONCURRENCYTESTITEMS Script Date: 1/26/2013 12:12:48 PM ******
CREATE SEQUENCE "SEQ_CONCURRENCYTESTITEMS"
START WITH 1
CACHE 20
MAXVALUE 9999999999999999999999999999

still not comming...
i have one table each entry is having only one fromdata and one todate only
i am running below in sql it is showing two rows. ok.
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
   from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
   on t0.DocEntry = t1.DocEntry
   inner join ohem t2
   on t2.empID = t0.U_empid where t0.U_empid between '830' and '850' and t1.U_frmdate ='20160801' and t1.u_todate='20160830'
in commond promt
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
   from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
   on t0.DocEntry = t1.DocEntry
   inner join ohem t2
   on t2.empID = t0.U_empid where t0.U_empid between {?FromEmid} and {?ToEmid} and t1.U_frmdate ={?FDate} and t1.u_todate={?TDate}
still not showing any results..

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

Why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.

why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

Since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up

since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?

Hi Erdelestre,
Thanks for visiting Apple Support Communities!
See this article for some tips about troubleshooting AirPlay:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Best,
Jeremy

[svn] 1720: Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints .

Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button

I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button .

Try connecting it to another PC, if it is ok, then your PC has some software conflict with iTunes.
If it hangs other PC also, then your iPod Hardisk, maybe bad.
Do the disk diagnosticas posted earlier by tt2, to check the health of your Hardisk.
Have a nice day!

Cancel Query not working

Problem Summary
Cancel Query not working on 11.5.10
Problem Description
While finding orders, window pops up the cancel query but when user tries to click the cancel button, query does not cancel.

jemar98 wrote:
Problem Summary
Cancel Query not working on 11.5.10
Problem Description
While finding orders, window pops up the cancel query but when user tries to click the cancel button, query does not cancel.Please post the details of the application release, database version and OS.
Was this working before? If yes, any changes been done recently?
Please review (Canceling Long Running Queries in Oracle Applications 11i [ID 138159.1]) and make sure you complete all the steps.
Thanks,
Hussein

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

Internet connection does not work when Macbook wakes up from sleep

I recently installed MAC OSX LION. After that whenever the macbook pro wakes up from sleep, the internet connection does not work. I get a message 'DNS lookup failed'. I have to Turn off the WIFI and turn it back on every time. Has anyone come across this?

Same problem here. But I am afraid it has nothing to do with Safari because I don't even have Safari open. When it wakes from sleep, it has no internet connection and i cannot get me mail unless I shut wifi off and then back on. This happened back at the start of Snow Leopard too and it was something Apple eventually fixed.

My database connectivity is not working inspite of installing sql express

My database connectivity is not working inspite of installing sql express ...what should I do so that my database works

Hello karan7,
In addition to pvdg's post, can you reproduce this issue with a new fresh database? If you can this means it is a SQL Setup related problem. If you cannot, your database file may already corrupt.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[svn] 3752: Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.

Revision: 3752
Author: [email protected]
Date: 2008-10-20 12:41:06 -0700 (Mon, 20 Oct 2008)
Log Message:
Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.
QA: Yes
Doc: No
Checkintests: Pass
Details: Merged change 3676 from trunk.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-195
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
width: 220px;
left: 180px;

Automatic update of RemoteApp and Desktop Connections does not work (while manual updates with "update now" is working)

Hello,
on several Windows 7 Clients the update/refresh of the RemoteApp and Desktop Connections stopped not working automatically. There is a Update failed error. When we do an "Update Now" manually, it gets synchronized without problems.
I am asking me if there is an issue with a stored Password as we Need to Change the Passwords regularily. The error is occuring for Connections to all RDS Servers (we have severals).
Does Windows store the user Password in the Task Scheduler? If yes, does the schedule Task Password Change automatically after the Domain Password Change?
Or what else could be the issue? The RDS Server and the certificate (Name the same as the URL) seems to be fine as not all Clients have this issue.
Thank you for your help

Hi,
Thank you for posting in Windows Server Forum.
By default it will automatically update the RemoteApp and Desktop Connections but if in any particular case it’s not happening then for a try you can restart the server and check the result again. In addition you can try running below command and check
the result.
Start-Process rundll32 -ArgumentList "tsworkspace,TaskUpdateWorkspaces2
More information:
Powershell to update "RemoteApp and Desktop Connections"
If a task is registered using the Administrators group for the security context of the task, then you must also make sure the Run with highest privileges check box is checked if you want to run the task. Please check “Task
Security Context” for more details.
Hope it helps!
Thanks,
Dharmesh

HP Pavilion Entertainment PC: WiFi works, however, hard wired connection does not work.

Internet via WiFi works, however, hard wired connection does not work.
My software indicates my hardware is working properly.
However, if I connect another computer to the cable I am using, it connects to the internet without a problem.
And, if I connect my comupter to another cable that works with another computer, my computer still does not connect to the internet.
HP Pavilion dv9700 Notebook PC
32-bit Operating System
Windows Vista Home Premium Service Pack 2

It could be that the touch pad is broken on the inside and the contact area for the one button is either broken, blocked with an object or the cable going to the mother board is not inserted correctly into the mother board connector. I think in any case the case will have to come off and someone look for physical/connection problems. It doesn't sound like a software problem but there is always a chance.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Re: Bug: Cross Connection Query not working

Similar Messages

Maybe you are looking for