Re: Business sytem availability in Integration builder

Dear Techies,
Iam trying out one preliminary test scenario to map between two flat files.
I had defined only business system sender at starting phase and after building the mapping scenario I again gone back to the SLD and created the business system receiver. But while iam trying to generate configuration part in Integration Builder Iam unable to find the receiver business system which I had created after mapping scenario.
How to find the business system in configuration of integration builder.
Thanks in Advance.
Regards,
Kiran

Dear Hareen,
Thanks alot for your reply.
After cleaning the cache also iam unable to find the reciver businees system which i  had defined in SLD while assigning the business system in integration builder
Thanks in advance.
Regards,
Kiran

Similar Messages

  • Business Systems not appearing in the Integration Builder (Configuration)

    Hi Experts,
    I have created new business systems in the Integration Builder of my PI System.
    This is not appearing in the Integration Builder.
    I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
    Thank you.
    Thanks
    Kasee

    Business system from SLD not visible in Integration Directory

  • Business System não aparece Integration Builder

    Boa Tarde Pessoal,
    Criei um novo Business System no SLD do ambiente onde estou configurando a NFe 2.0, porém quando tento atribuí-lo no Integration Builder o mesmo não aparece na relação.
    O novo Business System não está atribuído a nenhum Business Service uma vez que acabei de cria-lo no SLD.
    Existe algum procedimento que estou deixando de executar?
    Desde já grato,
    Guilherme

    Guilherme,
    Você já tentou limpar o SLD cache ? Você pode fazer isso através do seguinte caminho no Integration Builder: Environment -> Clear SLD Data Cache
    Após isso, tente entrar na aba Objects do Integration Builder e abrir o item Service Without Party , clique com o botão direito sobre a opção Business System e após Assign Business System, deverá aparecer para seleção seus Business System na opção: "3. Select Business System".
    Espero ter ajudado.
    Abs.,
    Cristian

  • Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

    Dear Friends / Experts,
    I had spend many days and explored all Weblog  and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
    As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
    Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
    In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
    Our Environment - PI 7.0 SP 16
    Created a new role in the Integration Builder Design
    u2013Add Object Types of any Software Component and Namespace
    - Enable usage of Integration Builder roles in Exchange Profile
    Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
    Assign users to the newly created Integration Builder roles
    u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
    u2013Assign users to these roles
    u2013Assign the Integration Builder roles to the above groups in Web AS Java
    u2013Assign unrestricted roles to Super Users
    Please help - How to validate whether Data Dependent Authorizations are Activated?
    I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
    Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
    In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
    In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
    The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
    http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
    I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
    Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
    Thanks a lot
    Satish

    Hello,
    so to give you status of our issue.
    We were able to export missing business component .
    But we also exported some interfaces after that and we had some return code 8, due  to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
    So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
    Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
    Also recommending to read that, which is pretty good.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
    Thanks all,
    S.N

  • Importing Software Components into Integration Builder (Design)

    Hi
    I have successfully installed XI 3.0 and have done post installation configuration.  Could you please point me 1.  how to apply the patches specified in the document
    I have created Technical system and Business system to associate with it. Now I want to import those software components from SLD into my design time Integration Builder.  While I do this I am gettin an error "Interal Occured" - Details of the error list 2 numbers one being Null Point Exception.  Could you please tell me what could be the possible problem and the way to resolve.  Is there a do it yourself kind of a document to learn development in XI, ie step by step instruction right from Data object, message object, interface object, business scenario creation etc.
    2. Is there a special step to follow to get the Adapters link up and running withing XI 3.0 web browser. Cos. at the moment, its invoking another window with local port number followed by :800, but it has an error saying "File Not found"
    Please reply, really appreciate it.
    Best Regards
    Shiva.

    Hi Shiva,
    your second problem should be resolved, if you apply all available Patches to XI 3.0 (i.e. until SP Stack 03). I guess, that also the internal error in Integration Builder will be resolved by applying the patches.
    There is an OSS note 670388 that explains how to patch XI 3.0. It should explain all your questions towards patching.
    I would suggest to apply all patches and then check again, if those errors mentioned still exist.
    Best Regards
    Christine

  • SPROXY No connection to Integration Builder SLDCHECK working okay

    Hi,
    In R/3, when I run SPROXY transaction, I get "No connection to Integration Builder ".
    I have gone thru blog
    [How do you activate ABAP Proxies? |How do you activate ABAP Proxies?]- Activate Proxy.
    I have done all the config in R/3 and sldcheck is working fine.
    I have also edited "Integration Engine Configuration".
    I have added 2 entries in Specific Configuration.
    RUNTIME     ENGINE_TYPE     LOC
    RUNTIME     IS_URL                 http://xidpro100:8000/sap/xi/engine?type=entry
    But still getting this error.
    Regards,
    Anirudh.

    Hi,
    check, have you maintain values in sldapicust.
    and check the host file entries in os level.
    check the rfc is working properly  INTEGRATION_DIRECTORY_HMI
    In integration engine configuration  role of business system as Application sytem
    and corresponding integ server as dest://SAPISU_XID
    check this values are there
    then get back we will resolve this issue..
    Regards
    Vijay
    Edited by: vijay Kumar on Sep 20, 2008 8:28 AM

  • No Connection to Integration Builder

    I have connected one our SAP Systems to our XI system in the XI technical and business landscape.
    Whats weird is that when I log into the system that is connected and try to run the transaction sproxy, I get a message saying that there is no connection to the integration builder.
    I do now know how to proceed.
    Thoughts anyone?

    Hello
    I have a similar problem. I am trying to configure my Application System (not XI) so that SPROXY works.
    My systems are:
    - Application System asystem -> host = ahost, port = aport
    - Integration System isystem-> host = ihost, port = iport
    At first I opened http://<ahost>:<iport>/exchangeProfile. Because I received errors I went to "Connections" (http://<ahost>:<aport>/exchangeProfile/connection.jsp) and entered the connection parameter for my isystem.
    Afterwards my Exchange Profile was filled with the entries of my isystem. This means:
    com.sap.aii.connect.repository.name = ihost
    com.sap.aii.connect.repository.httpport = iport
    com.sap.aii.connect.repository.contextRoot = rep
    com.sap.aii.connect.integrationbuilder.startpage.url = rep/start/index.jsp
    Is this correct?
    Any help is appreciated
    Best regards
    Markus

  • We are unable to connect to Integration builder through VPN.

    Hi,
    We are unable to connect to Integration builder through VPN.
    Below are the errors we get:
    a. In two of the PI 7.0 Systems  we get:
         i. Cannot open connection on host x and port y.
         ii.com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: x and port:y
         iii. java.net.SocketException: Malformed reply from SOCKS server
    b. In the other two PI 7.1 systems we get:
         i. MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
         ii. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port:y]
         iii. com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port: y
    The hosts and ports are accessible. (Telnets and tracerts work fine for all the systems)
    We are able to access the SLD and Runtime workbench on all the environments. However, Integration Builder tools are not accessible.
    Any clue on what the problem might be?
    Thank you,
    Siva.

    Hi Siva,
    When you execute SXMB_IFR from PI, do you get  Integration Builder page?
    Are you trying to directly access the PI server by the known URLs?
    Also, Following links may be of your use:
    Integration Builder -Configuration is not openning?
    Re: unable to logon to Enterprise Services Builder or Integration Builder
    Regards,
    Nipun

  • Integration Builder data not understood - Problem

    Hi all,
    i have a problem with XI.
    I want to generate Proxies from XI Content in a SAP System.
    in SPROXY i can't see any data from the repository.
    SLDCHECK runs successfully.
    If i run SPROX_CHECK_IFR_CONNECTION i get the failure message "Integration Builder data not understood".  I have already changed all passwords for the service users in XI and Exchange Profile.
    can you give me a hint what the problem could be ?
    br,
    martin

    Hi martin,
    Make sure your business system is set up as follows:
    1. Transaction SXMB_ADM
    - Role of System: Application System
    - Corresponding Integration Server:
    dest://<your_sm59_http_destination>
    2. Ensure that the RFC destinations LCRSAPRFC and SAPSLDAPI are
    maintained and working
    3. Run SLDCHECK to verify that the connection to the System Landscape
    Directory works.
    4. Check that the Integration Repository is running and data is maintained there.
    check out the 18th page of this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
    Message was edited by:
            MANIKANDAN subash chandran
    Message was edited by:
            MANIKANDAN subash chandran

  • Connect one Business system with two Integration Server

    Hello,
    Can we able to connect one Business System with two Integration Server?
    I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
    I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
    Is this possible ?Is there any work around solution there?
    Thanks.

    Hello ,
    This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14  .
    I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
    Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14  ?
    Thanks.
    Lakshmi
    Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
    Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

  • Best Practice Guide for object management in Integration Builder

    Hi All,
    I'm looking for a best practice guideline, or a strategy pattern for the management and maintainable of Integration Builder objects.
    Is their such a document, or has someone experience with a huge amount of objects ( 200-300 interfaces) ?
    I was thinking about a folder to sub-folder strategy, but don't feel comfortable with that solution:
    -->Root folders ( business relationship e.g. "Customer", "Supplier", "Bank" etc.)
    >Sub folders ( e.g. "AB Customer", "ZX Supplier", etc)
    Regards
    Oleg

    Hi ,
      I am in the safe confusion one year back, we developed 200 interfaces in XI3.0 ,every interfaces has minimum 10 mapping programs,its difficult manage the alla scenarios ,
    That what i created Software components for as per region like SA(South America), North Americ , Europe, Asia Pacific,we developed interafces for above regions,that why  created software compinehts like that.
    Then i created name spaces inside outbound and inboud to easy to diffentiate ..like that i had done.
    If you are with PI7.1 betetr to go for Folders,create folders and move objects.
    my answer not satisfies you..pls dont mind..:)
    Reagards,
    Raj

  • I am not getting Business System into my Integration Directory.

    Hi All!
       This is satish, <b>I created Business system in SLD. How to get them in Integration Directory.</b>Please help me.
    Thanks in advance!

    Hi Satish,
    Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
    Then
    2 options to refresh the cache-
    Integration Directory->Environment->Clear SLD Data Cache
    Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
    Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
    Then synchronise the same by SLD cache refresh as mentiond.
    changing BS
    Also refer for more-
    Problem in Assigning the Business System
    Hope this helps,
    Regards,
    Moorthy

  • Could not start Configuration wizard in Integration Builder - Configuration

    Hi SDN,
    I am New to XI,
    I have gone through 4 scenarios of XI in a system where Xi is up and running sucessfully.
    Now one of my colleague Installed ECC5 with XI in our local server.
    I need to do a File 2 File Scenario, for which I could create Product, component, Technical System and Business System in SLD.
    I could Create a Name space, Message types and Interfaces in Integration Builder - Design
    But When I open Configuration Wizard, Internal Communication in Integration Builder- configuration, it is giving a exception : java.lang.NullPointerException.
    Can any one help me in resolving this.
    Thanks in advance,
    Regards,
    Sai.k.k
    Message was edited by:
            Konchada Sai Krishna

    Hi,
    In Exchange profile chack the SLD , http port for Integration Bulder properties.like IR,ID , i hope it will try to check for the SLD info , if it is the first time of XI using , you need to check in Exhcnge profile .
    if it is not the first time then refresh the SLD cache..
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
    for cache refresh
    /people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
    XI Runtime cache error: Cache contents are obsolete
    Cache Refresh - SAI_CACHE_REFRESH
    /people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
    Regards
    Chilla

  • SPROXY: No connection to Integration Builder (only local data visible)

    ¡Hola!
    When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
    I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server.  I also checked that the parameters in the Exchange Profile were correct.
    Transaction SLDCHECK is working ok.  The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
    In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
    1.  The address of the Integration Builder must be stored in the R/3
         System
         =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
    Result: OK: Address maintained
    2. The HTTP connection of the R/3 application server must function
    correctly
    =>Check with report SPROX_CHECK_HTTP_COMMUNICATION
    Result: HTTP communication functioning
    The following 2 steps return an error:
    3. The Integration Builder server must be running correctly
    =>Check with report SPROX_CHECK_IFR_RESPONSE
    Result: Integration Builder data not understood
    4. Proxy generation must correctly interpret the data of the
    Integration Builder
    ==>Check with report SPROX_CHECK_IFR_CONNECTION
    Result: Integration Builder data not understood
    I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system.   Can someone please help?
    Thanks and Regards,
    Carlos

    Carlos,
    Check Global Configuration data in R3  using TC : SXMB_ADM.
    You need to set values..Role of Business System : Application System and Corresponding Integration server details.
    Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
    Nilesh
    Message was edited by:
            Nilesh Kshirsagar

  • Switching between clients - Integration builder

    Hi,
    I'm trying to set up specific business scenarios between different clients on our R/3 qas server. Using integration builder, each interface was defined as having either sender / receiver clnt100 and clnt401. Tests have been performed successfully on both clients vs. our legacy system.
    Recently, it has become necessary to remove interface data coming from / going to client 100. I've removed the necessary definitions in the business scenario configurations. This has worked fine : tests outbound from client 100 are not being processed. However, I'm having trouble with the link between the IDoc interfaces and the processing of the messages for the remaining client. Each message type, such as (ZZ)CREMAS or (ZZ)MATMAS is defined correctly, and we have periodic jobs setup that run a specific program with an associated variant.
    Ex : Job SEND_VENDOR_CP runs (successfully) every minute (with an associated message type). However, the data isn't being pulled. I have to manually start the job. This then results in a message being sent through (sxmb_moni - message with "checkered flag") and the legacy system receives the data from this client (401) normally. I'm just wondering why the interfaces don't run automatically in client 401 (as they still do in client 100). Is there a missing association in the message types ?
    Any help would be greatly appreciated (I'm fairly new to XI). We are using XI 2.0. Our systems are defined as :
    XIQAS000 (1 client) EQ1CLNT100 & EQ1CLNT401 (same for the RFC's).
    Thank you,
    Eric P.

    Found the problem : the scheduled jobs on 401 were targeting client 100. Re-creating the background jobs has solved this problem.

Maybe you are looking for