Re : Business transaction category & Leading transaction category

Hi All,
if any one could differentiate between Business transaction category and leading transaction category, kindly give examples.I understood there is two business transaciton category( sales & business activity) for Standard sales order, please explain why we need two business transaction category here.
Regards,
Sathish Prabhu.R

Hi Sathish,
The leading business transaction category is merely a preference. For example, A transaction with the business transaction categories 'sales' and 'business activity' would be more likely to have 'sales' as a leading business transaction category than 'business activity'. In the locator for transaction processing, a transaction with this transaction type would be displayed as a sales transaction, not as a business activity. For example,When creating a business transaction type "standard order", you would choose Sales as a leading business transaction category. You could however also assign the business transaction category Activity.
Best Regards,
Vishant

Similar Messages

  • SD Document Category to CRM Leading Transaction

    Does anyone have a listing that indicates what the SD Document Category should map to within CRM for the Leading Transaction?
    For exmaple, SD document category of "C" should map to the CRM leading transaction of CRM2000115 Sales Transaction.
    SD document categ.                          
    A  Inquiry                                  
    B  Quotation                                
    C  Order                                                        CRM:  CRM2000115
    D  Item proposal                            
    E  Scheduling agreement                     
    F  Scheduling agreement with external service
    G  Contract                                 
    H  Returns                                  
    I  Order w/o charge                         
    K  Credit memo request                      
    L  Debit memo request                       
    W  Independent reqts plan                   
    0  Master contract

    Hi,
    B Quotation                 2000115               
    C Order CRM        2000115
    G Contract            2000121
    K Credit memo request 2000162
    L Debit memo request   2000167
    These are a few which I know.
    Check the table TOJTB in Tcode SE16 in CRM for other entries.
    Thanks.
    Best Regards,
    Arun Sankar.
    Edited by: Arun Sankar on Aug 7, 2008 1:59 PM

  • Financial transaction and commitment item category

    Hello,
    Can any one suggest what financial transaction and commitment item category can be used when creating the following commitment items:
    u2022     Value added tax (VAT)
    u2022     tax on profits
    u2022     before-tax income
    u2022     nett income
    u2022     net financial result
    And moreover, should such a commitment items be created?
    Thanks
    Irina

    Hi Irina,
    As I said, the real question is whether you are going to use these commitment items for budget management. If not, it does not really matter if it will be defined 50/2 or 50/3 - in any case, the AVC will not be applied to these lines. It's not even necessary to define a separate commitment item for these G/Ls; it's possible to define one dummy commitment item for all transactions which are not relevant for budget activities.
    Regards,
    Eli

  • Restricting Follow Up Activities on Lead Transaction

    Hello All,
    I need to restrict certain follow up activities on the lead transaction, I have gone through the forum and found out that the same can be restricted using authorizations
    Following are the posts
    Limit the transaction types by role
    Restrict the transactions type in pop-up when creating a Transaction
    Following are the auth code checks I have performed
    The objects CRM_ORD_LP and CRM_ORD_OP have been set to inactive screen shot attached below
    The transaction type Z002 which needs to be excluded is not maintained in the object CRM_ORD_PR
    For the concerned user only one role is assigned, however when I am creating the follow up activity from the lead transaction, the system is allowing me to create the same, please advice if I am missing some configurations
    I am able to create the activity as per the screen shot below
    Kind Regards
    Atul

    Hi Shobhit,
    Thank you for your prompt reply, I have the following queries appreciate if you could let me know
    For the Object CRM_ORD_LP
    What entry I need to maintain for the activity
    For the object CRM_ORD_OP what entry do I need to maintain for the below three parameters
    a) Activity
    b) Partner Function
    c) Partner Function Category
    Kind Regards
    Atul

  • Restriction of Campaign's in Lead Transaction Screen in IC Role.

    Hello,
    I am working on a CRM Web Ui project where we create campaigns in the marketing role, when creating the campaign we do have the tab products where the user will enter the product id, the category id which is assigned to it will get defaulted, my requirement is that when the user enter's this category id in the lead transaction in the interaction centre role, only campaigns pertaining to that  particular product or category should be visible in the dropdown when creating the lead.
    I also understand that this is a technical requirement and can be done through a user exit, appreciate if anyone knows about this user exit and what code needs to be written in the same, since I do not have any Web Ui technical folks to help.
    Appreciate your help on the same.
    Kind Regards
    Atul

    Hi,
    The easiest is to not show the version number characteristic.
    Create the layout as follows:
    'CustGp', 'Biz_Unit', 'sales_Area', 'Prdct_Div', 'Billing2006', 'Target_2007 A10', 'Target_2007 B10', 'Target_2007 A10'.
    S1, B1, SA1, Div1, 4500, 5000, 6000, ____ .
    From a user point of view, this layout is more intuitive.
    After all, why should the billing be shown 3 times.
    You could even show the difference between target A10 and target B10 to make it easier for the user to fill column Z10.
    You can achieve this by putting the version in the 'data columns' on the first screen of your layout and then create several lines in the 'data columns' tab and enter the correct version (A10, B10, Z10) in the different lines.
    You will also need a line for billing and will be obliged to assign a version. Billing generally has no version so enter '#' not assigned.
    Please assign points if this helped you,
    Best Regards,
    Filip

  • Creating BP and then a Lead transaction from the incoming Email.

    Hi CRM Gurus,
    I am in a situation where our business needs to create a BP and then a Lead Transaction from the incoming mail from the customer.
    Can some one please help me out with the configuration, which needs to be done to achieve the mentioned requirement.
    Thanks in advance..
    Cheers!!!
    Ajay

    Hi
    this example is not for ERMS but in it there should be quite similar possibility.
    for Interaction Center you have Agent Inbox functionality, in SPRO tcode your will find configuration for Agent Inbox, where you may review it. To find workflow which is used by system you may go to SWETYPV tcode and look for object CICSUPRT2 and event MAILRECEIVED. Or go to SWEL and check whuch workflows were executed at a time when email arrived.
    Then best will be to copy this workflow in tcode SWDD to a new one, and set it in above configuration to be executed.
    In SWDD in this workflow add tasks for BP creation and Lead creation. Possibly you will find methods to be used in tcode SWO1 for objects like Lead or Business Partner. Or you may develop yours object in SWO1 with own menthods, and use it later in SWDD for tasks creation.
    Regards

  • Common follow-up task for multiple lead transaction types

    Hi Gurus,
    Happy New Year.
    I am creating 3 lead transaction types as per the business requirement and i want to use common lead follow-up task for all three Lead transaction types.  My question over here is what are the problems if i use common follow-up task for multiple lead types.
    Thanks and Regards,
    Arun

    Hi DJ,
    Thanks for the Quick response....
    comming to your questions,
    1. As of now i am planning to use same number ranges for 3 lead transaction types.
    2. Yes these lead types are user specific. first two lead transaction types will be seen by User A , and Lead Type 3 will be seen to User B.
    please suggest me how to go on.
    Awaiting for your response.
    Thanks and Regards,
    Arun

  • Number range in Lead Transaction

    Hi ,
    In my Sandbox we have created one lead transaction and assigned one number range to that transaction.Now suddenly we figured out that one number of that range is assigned to more than one transactions of the same T type. eg 116 number is assigned to two different lead transactions created at two different times from the same transaction type. Is it usual scenario pls let me know how to debug the problem.
    Thanks,
    Ambrish

    Hi
    Run the archiving program which is by SARA transaction.
    Put the archicing object CRM_LEAD.Its shall pick up all the transactions which are to be archived and put them in a flat file.
    For further information refer to the link:
    http://help.sap.com/saphelp_crm50/helpdata/en/e6/c66f3b6c980c3be10000000a11402f/frameset.htm
    Regards
    Rekha Dadwal

  • Business Object type and Transactions

    Hi, gurus.
    Where can i check the matching of Business Object type with transaction type , i.e. CRM Service Process ( BUS2000116 and SLFN)?
    Is it possible to change these kind of settings? Where?
    Thanks a lot

    Hi Michele 
    The transaction you are looking for should be SWO1
    Then put the ex "BUS2000116" into the Object/Interface type and ...
    Guess it will help you
    Best Regards
    Daniel

  • NodeID of business process in solar01 transaction in solution manager

    Hi All ,
    Can any one help me to find out the Nodeid of any business process in solar01 transaction ??
    wanna know where can i find out the nodeid ?
    Thanks in advance ...

    Hi,
    relevant are the tables TPR_INDEX, TTREE and TTREET!
    Nodeids are in table TPR_INDEX.
    TPR_INDEX-REFNODE_ID joins with TTREE-NODE_ID
    TTREE-ID joins with TTREET-ID, where you will find the text of the node.
    Regards,
    Christoph

  • Actions not working in LEAD TRANSACTION

    hi all
    we are working on CRM 5.0 standalone system.
    i have a problem that actions assigned in LEAD transaction isnt working.i have checked all the customising that in action profile workflow is attached and action is assigned to the transaction but when i open the transaction in menu "maintain lead" under the action tab ,am not able to select the action as it is freezed or greyed.
    i have tried using standard transaction under which standard actions are assigned but of no use,strangely actions are working in activity and marketing planner.
    please suggest how should i solve this.
    help will definitely be appreciated.
    best ragards
    ashish

    hi sathish
    thanks for the reply,well m not novice to actions.i have checked everything .its what it should be in the action profile.thing is that i have been using action to test my workflow in transaction.but out ot no where in lead transaction action is freezed in a way in the background when ever transaction is saved the workflow is being triggeredand things are done as such but in action tab in lead transaction i am not able to trgigger the action because it is freezed and i cant see the action log.
    it is like this in lead transaction only but working fine with marketing planner and activity.
    i have no cluse whatsoever ,why is this happening.in action profile i have chjecked everything and infact i have used standard ACTIONS WITH STANDARD TRANSACTIONS
    BUT IT IS NOT WORKING
    ANY CLUE WHY IS THIS HAPPENING.
    REGARDS
    ASHISH

  • Determining Partner in Lead transaction thru Organisation  model

    Hello,
    I need to determine responsible employee in lead transaction thru Organisation model that I have created . Now I dont want to use the attributes of the organisation as we have some constraints in that I need to determine a partner out of the assignment I have done in Organisation model. eg If BP "0001" is assigned to Org unit A as employee(Holder of a position) is it possible for me to determine the same employee in lead transaction as Employee responsible if I give the input of org unit A in the transaction? If yes pls let me know the steps for doing the same.
    Thanking in anticipation.
    Ambrish

    In SPRO Customer Relationship Management > Master Data > Organizational Management > Organizational Data Determination >Wizard for Organizational Data Determination > Create Determination Rule of the Responsibility Type.
    There, you assign a name, scenario (Sales or service) and select an attribute for example: SA_RESPORG Responsible organization, then assign Organization unit. After you assign  profile to transaction type Lead.
    Regards

  • Business Package for MM Transactions

    Hi all.
    I wanna know if there exists a Business Package for MM transactions i mean a BP that allows users to interact with MM transactions, specifically approval transactions in MM.
    I hope somebody can help me.
    Thx.
    Regards.
    Gregory.

    I found it (BP EXTERNAL PROCUREMENT 60.2) after ages looking today. links are given below:
    info:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a02cd4a8-9c6d-2910-eab0-94e41996af89
    file:
    https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=Y&FUNCTIONBAR=N&EVENT=TREE&V=MAINT&TA=ACTUAL&TMPL=01200615320200007730
    I really don't see why it should be so hard to find stuff on sap.com!
    even when you do locate something you then have to battle with the pointless sap download manager to get any further!
    ho hum...

  • Eliminate Action Selection pop-up box from leads transaction PCUI page

    I am trying to eliminate a popup from PCUI page and need help. Here is the scenario,
    When the user tries to create LEAD transaction from PCUI page; the action selection popup box is coming up and the user needs to select the “Create Lead” from the popup box. How to I eliminate the pop-up box? Please help me on this one.
    Thanks.
    Kishore

    Hello,
    In which version are you working?
    With which application?
    Regards,
    Fred

  • Mandatory field 'Business Area" in MIRO transaction

    Dear All,
    We are facing problem in MIRO transaction, while doing MIRO business area field is mandatory so we are not able to check our one substitution for Business area.
    Request you to help us to remove mandatory field "Business area" from MIRO transaction.
    Thanks,
    Shree

    Hi
    Since the tick is appearing in this field, either the field status group (at posting level or GL level) should have been made mandatory.  Can you please check the relevant FSG for the reconciliation account involved for that vendor.
    Also since you want this field as optional only for testing purpose, i have a alternative suggestion.
    Say, If your substitution is suppose to replace this field with business area A, then enter business area B there and check whether the substituition is replacing this with A again.
    Regards

Maybe you are looking for

  • Time Capsule can't set up as wireless network, but Airport Extreme works

    I just bought a Time Capsule to use as a back-up hard drive and a wireless network. I currently have a Airport Extreme for my wireless network and it works fine. When I try to plug in the ethernet cable into the Time Capsule to set up a new wireless

  • How to remove DSFW Server ?

    HI I had build a DSFW Lab and I want to try to write a procedure about how to remove DSFW Server that like server need hardware or crash...But I check the oficial document that seem not provide about how to remove.... Who could teah me or provide whi

  • My itunes account is american but I need to use a canadian credit card to top up but only once...how????

    I am Canadian but travel between Canada and the US so have a Canadian account AND an American account. the movie I need to download (for a school project for my daughter) is not available through the Canadian iTune store, only the American but I am a

  • Spry Accordion IE6 issue

    I have created an image for the accordion tab panel (c.g the heading of the accordion menu). I then created a hotspot on the image to go directly to that site without having to open the accordion menu. However in IE6 the hotspot is ignored and the pa

  • Calendar forms10g: doesn't display, 'cause items are required in the record

    in the record I have items with the required property set to yes. I Display the Calendar on Key-ListVal and When-Mouse-DoubleClick triggers. when the triggers are fired, oracle shows me the following error FRM 40202 Field must be entered. and I can't