Re: Camileo X100 - cannot edit the files

I bought the Camileo X100 and have been frustrated ever since i got it.
I cannot edit the files with anything, Adobe premiere CS5 sees them as only Audio, Sony Vegas Studio HD 9.0 only see them as video with no audio.
I've tried to convert them but, it converts with no sound and poor picture quality or with no video and just sound. VirtualDub gives me an error when i try to convert with it aswell. Quicktime still can't play them even after instaling the Divx package.
It seems counter productive to make a camera that has codecs that are this hard to edit.
I ran Gspot and it says H.264/Mpeg-4 AVC supposedly this is standard but, but the issue i think is that it's container is AVI.
So my question is, should i return this camera? or is there a way to edit on Vegas or Premiere?

I figured it out on my own. What you need to do is Download Windows Movie Maker 11. Import 1 file at a time and set whatever resolution you want (preferably the same resolution you brought it in as) But make sure when you're saving your video set the bitrate at 10000. So for example my video is 1920x1080, so my export is 1920x1080 at 10,000 bit rate and 30 FPS. With these setting there is absolutely NO loss of video quality. This will work with your S10 too. And the files become editable in Premiere CS5 and Sony Vegas. Have fun!

Similar Messages

How do I edit the file cluswmi.mof

i am trying to edit the file cluswmi.mof under
c:\windows\system32\wbem but even with an elevated prompt I cannot edit the file
any idea?
permission denied

Hi,
It seems like you don't have permission to edit this file.
Could you check the file permission?
Did the user have administrator permission?
Regards.
Vivian Wang

Cannot edit sudoers file in single user mode.

I did not back up my sudoers file on my pro.
I made a change to it, adding my "test" user to be able to use sudo, but upon restarting, it didn't work, and I cannot edit the file via cd in single user mode.
I mounted the drive, changed permissions, but it seems that I don't have the option to use vi, visudo, vim.
Thanks for the help.

I mounted the hdd using the command below.
I then made sure I could get to the file by cd to it.
Then once I was there, i would attempt to type vis <tab> to complete, and visudo does not show up. Typed in visudo, nothing. This was on a brand new mb pro. I can wipe it out, but I would rather figure out why its not working.
The reason for all this is I have to give it to a user at my job. We don't want them to have admin rights to install anything they want, but they need to use sudo in X11 for compiling and such. I read online that I can edit/add their username to the sudoers file, and allow them the right to sudo for compiling, starting apache on their laptops, etc.
Thanks.

Using NIK software...LR5 said it cannot prepare the file for editing

I have reimported photos from my backup HD (Lacie) into LR5. After selecting a photo in LR5 I attempted to edit using NIK software...LR5 said it cannot prepare the file for editing?
Message was edited by: Geoff the kiwi
Changed title to reflect query

Is there a question mark icon next to your photo?
What is your operating system?
Which NIK Software?

As administrator, I cannot edit certain files unless I add read/write/etc. for the Users group.

I'm administering a Subversion server running on Windows Server 2008 R2. When I need to add access to SVN repositories, I need to edit a svnaccess.txt file. This file sits under C:\Program Files(x86)\CollabNet\Subversion Server. When I
attempt to edit the file, though, I cannot save it unless I save it to a new file.
My account is part of the local administrators group. All of the folders and subfolders in the path have Full Control enabled for Administrators. The file itself also has Full Control enabled for Administrators. Yet, the only way I can
edit this file is to add Modify and Write permissions to the local Users group even though my account is only part of the local administrators group.
What's odd too, is that if I can edit these permissions I must have the appropriate administrator privileges.
I searched for this a while back and recall seeing a hotfix for this as it was a known bug in Windows Server 2008, however, I cannot for the life of me find this link anymore nor do I see a fix like this on the hotfix spreadsheet. I need to locate
the hotfix that corrects this to provide to our system admins. For some reason, they will only install hotfixes if a problem is identified.
If anyone knows of the hotfix that corrects this issue, please let me know! :)
Thank you!

Hi,
As you said, if a user account belong to local Administrators account, when only Administrators group has permission on a folder, all admins except Administrator account will not have permission to access it.
This is caused by UAC. All accounts in local Administrators group are actually working as standard accounts. When an Administrator action need to be performed, a prompt will occurs for permission to promote to admin permission. As only Administartors group
has permission on a folder and the account we are using is working like a standard account, we will be denied from accessing.
A workaround is to create a new group for all admins and give the group enough permission for accessing the target folder.
Or you could run all accounts in Administartors group in Admin mode. See this article:
UAC Group Policy Settings and Registry Key Settings
http://technet.microsoft.com/en-us/library/dd835564(WS.10).aspx
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Excel Automation with Interop - Windows Service - Microsoft Excel cannot access the file

I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
the following error when trying to open the excel file:
Unhandled exception Occured : 'Microsoft Excel cannot access the file 'bla.xls'. There are several possible reasons:
The file name or path does not exist.
The file is being used by another program.
The workbook you are trying to save has the same name as a currently open workbook.'.'
The code snippet used to open the file:
xlApp = new Application();xlApp.Visible = false;xlApp.UserControl = false;xlApp.Application.ScreenUpdating = false;xlApp.DisplayAlerts = false;xlWorkbook = xlApp.Workbooks.Open( Filename: filePath, UpdateLinks: 2, IgnoreReadOnlyRecommended: true, Editable: false);
The console app and windows service are running on a Win Server 2008 64-bit OS with Excel 2013 32-bit installed. The service is running with a special user account, which has all the right permissions on accessed files and folders. The excel process is also
started with the same account (I cheched that one).
I already tried to do the following, but to no avail:
Run excel.exe /automation -> worked fine
Created the folders and also gave full control to the account under which the service is run (even gave full control to Everyone)
C:\Windows\SysWOW64\config\systemprofile\Desktop
C:\Windows\System32\config\systemprofile\Desktop
Configured DCOM
Excel Application -> Identity -> Specific user account
Excel Application -> Identity -> Interactive User
Excel Application -> Security -> Launch permissions -> Everyone full control
Several combinations of the above
So I really am stuck with this problem right now. Any input on this is appreciated.

I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
the following error when trying to open the excel file
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office
may exhibit unstable behavior and/or deadlock when Office is run in this environment.
If you are building a solution that runs in a server-side context, you should try to use components that have been made safe for unattended execution. Or, you should try to find alternatives that allow at least part of the code to run client-side.
If you use an Office application from a server-side solution, the application will lack many of the necessary capabilities to run successfully. Additionally, you will be taking risks with the stability of your overall solution.
You can read more about that in the
Considerations for server-side Automation of Office article.

App-v 4.6: cannot find the file specified

Hi,
Please see my previous
post.
In short: an application needs Internet Explorer activex, then a plugin for Excel. My App-v package is working (Internet Explorer opening), but the Excel plugin does not work. It says "cannot find the file specified".
I copied the excel shortcut from start menu to q:\packagename.
Please advise.
J.
Jan Hoedt
In .osd file of Excel plugin, there is the following:
    <CODEBASE HREF="RTSP://%SFT_SOFTGRIDSERVER%:554/WindowsX64/Application/1.0/excelplugin.sft" GUID="9FA88591-089E-4E57-89D5-C23239E83238" PARAMETERS="" FILENAME="%CSIDL_PROGRAM_FILES%\Microsoft Office\Office12\EXCEL.EXE"
SYSGUARDFILE="applic.001\osguard.cp" SIZE="305879730"/>
       <WORKINGDIR>%CSIDL_PROGRAM_FILES%\Microsoft Office\Office12</WORKINGDIR>
The CSIDL_PROGRAM_FILES%, is that correct? If not, can I change it and how? Should I then reimport the package?
I might have found a solution but please advise:
http://blog.gridmetric.com/2011/09/26/possible-caveats-in-mixing-32-bit-and-64-bit-app-v-packages-and-environments/
Office is x86, so I probably should change the %CSIDL_Programfiles% to %programfiles(x86)%?

Changing CSIDL_PROGRAM_FILES to %programfiles(x86)% is worth a try.
A common reason for that 'cannot find the file..' error message also often can be resolved by removing the Workingdir entry (<WORKINGDIR></WORKINGDIR> or just <WORKINGDIR/>.
The way to apply the change depends on your deployment scenario. With an App-V Management Server (and for a test packae) you could modify (a copy of) the original .OSD file in the content share. Make sure you save with 'save as' and then 'Unicode'. Then
re-initiate a Server Refresh from the client, that should download the new OSD.
You also could - if it is permitted - create a copy of the client-local copy of the OSD file (you can figure that out with the Client Management Console). Double-Clicking that modified copy could do the trick.
If you use another deployment method (SCCM, MSI) you would need to moify the OSD file using the App-V Sequencer.
Whatever method you use during troubleshooting: For the 'final' pacage you should open the original package on the Sequencer ('Edit'), make the changes there and re-save + re-deploy the package. This makes sure that all information is consitent across the
various App-V files
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in

Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!

If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene

Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"

Hi forum Fellows,
I have the following failure scenario:
1. A user receives an e-mail with an attachment.
2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
5. The effect is that the user cannot send the e-mail.....
------------------------------ TROUBLESHOOTING -----------------------
- I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
---- After: Only one file is written to OutlookTemp. That is FileX.pdf
- Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
**** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
on to be there.
- Going with a totally clean OutlookTemp folder does not help.
------------------ NOW WHAT ---------------
- The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
------------------------------ TECH. INFO -----------------------
Outlook 2010 v14.0.7132.5000
Outlook bit depth: x86
Running on a 2008R2 SP1 TS environment.
No antivirus on the TS
Looking forward to hear from you.
Regards The Red Baron
Red Baron

Hello Red Baron,
Although not a complete answer, the way to treat attachments in emails require some discipline:
1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
the new version etc.
2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
3. Having any (unsaved) document open for several hours should
never occur. What if there is a power outage?
Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
These are the rules I teach my customers and they never leave any document unsaved for hours ...
Best regards George

System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo),

Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..

Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
      A.- Execute sapinst
      B.- Installation option is chosen
            SAP NetWeaver CE Production Edition
                    Installation Options
                        High-Availability System
                              Central Service Instance (SCS)
       c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks

The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?

Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

„The system cannot find the file specified. (Exception from HRESULT: 0x80070002)" - Error when trying to create an new controlled GPO

Hello,
we were planning to Upgrade from AGPM 4.0 to AGPM 4.0 SP2. The new AGPM should be placed on a new server. Additionally we created a new service account as the password of the old service account has been lost. We granted the new service account Full Rights
in "Domain Delegeation" and "Product Delegation", then stopped the AGPM Service on the old server.
On the new server AGPM was installed using the new service account, then the service was stopped and the archive was copied rom the old to the new server. The customer could edit policies, but not deploy them. Because of this, we changed back to the old
server, but copied the folders that were changed on the new server to keep them up to date.
Now creating a controlled Group Policy from a template causes the error
„The system cannot find the file specified. (Exception from HRESULT: 0x80070002). We tried several templates and even created new ones but the problem persists.
The following things do work:
- editing a controlled policy
- renaming a controlled policy
- check in/check out of a policy
- set a uncontrolled policy to controlled (needs to grant the serviceaccount Full rights to the policy before)
- deletion of a controlled policy
- creating a template from a policy
Thank you in advance for your help.

0x80070002 usually means that the source could not be found or located. Make sue that the FQDN path to your templates is the correct one as well as your DNS is
properly configured.
sharing some manuals @: http://1drv.ms/1kk6u6j

When I convert a PDF to a Word doc, it "converts" as a picture and I cannot edit the document. What can I do to get the PDF to convert properly?

When I convert a PDF to a Word doc, it "converts" as a picture and I cannot edit the document. What can I do to get the PDF to convert properly?

Hi conversionnewbie,
Are you able to select the text in Word by triple-clicking inside the text box? (Sometimes text selections can be tricky in converted files.) If you can't select the text, then I'm guessing that the PDF was created from a scanned file (so the text becomes images). Make sure that OCR is enabled when you convert the file to Word. OCR is enabled by default in the ExportPDF web interface, but can be disabled in Adobe Reader. If you're converting to Word from within Adobe Reader, make sure that OCR is enabled and that the correct language is selected:
Please let us know that works for you!
Best,
Sara

Could not load file or assembly 'Microsoft.SqlServer.Diagnostics.STrace, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.

I am trying to use SQL Server 2008 Developer on Windows Server 2008. Whenever I try to connect to the server, I get this error: "Could not load file or assembly 'Microsoft.SqlServer.Diagnostics.STrace, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified."
I found some info at
http://blogs.msdn.com/b/ashishme/archive/2009/08/15/could-not-load-file-or-assembly-microsoft-sqlserver-diagnostics-strace-version-10-0-0-0-culture-neutral-publickeytoken-89845dcd8080cc91-or-one-of-its-dependencies-the-system-cannot-find-the-file-specified.aspx,
but this didn't help me because it is not on my system, even after reinstalling both SQL Server and .NET Framework 4. I also saw a this page: http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/1115cd55-721d-4974-99b1-d142d1e6a927,
but this also didn't fix my problem.
What can I do, or where can I get the missing assembley?
Thanks in advance.

You can get the missing assembly (Microsoft.SqlServer.Diagnostics.STrace.dll)
by installing the "Shared Features" of SQL Server 2008.
You could only install SQL Server 2008
R2 (any edition) on Windows 7.
Do not install more than 1 SQL Server 2008 R2 edition
into the same computer; Some of the components are not compatible.
E.g: BIDS from R2 Express Advance edition cannot
recognize Integration Service from R2 Enterprise Trial edition - it would throw above missing dll error.

Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specif

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
Editing the web.config and adding dependentAssembly didnt worked for me.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi,
Please try to do as follows:
1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
2. Execute the iisreset command.
3. Create a new farm solution and check whether the issue still occurs or not.
Best Regards
Dennis Guo
TechNet Community Support

Re: Camileo X100 - cannot edit the files

Similar Messages

Maybe you are looking for