Re: Can I run JMF in linux without X

I've just installed JMF for Linux last night.
I have it working on a Win 98 system.
I "think" X-Windows loads the display drivers ? Not sure though.
I've an old ATI All-in-Wonder video capture card, and think I have to
upgrade from X Windows 11 Release 6, to a newer version to use the
new Linux Graphics drivers for my card under the Gatos project in www.Sourceforge.net.... ( For video-in capture, not necessarily video display )
Hope some of that vague information helps...
regards,
Owen

Yes, you can. However, you must have the Mac OS 9 System Folder installed on your hard drive.

Similar Messages

Can I run 9.2.2 without an OSX drive on board?

I am getting strange results on my Beige Tower running 9.2.2 (G3-366 MHz, 640 Mb ram, 6 Mb Vram, 30 gig Maxtor ATA HFS+, PCI ATI Rage 128, PCI XClaimPRo, PCI USB - not used, AppleTalk 1.1, AppleShare 3.9.2, CarbonLib 1.6, QuickTime 6.0.2).
When I use the Chooser to AppleShare connect to another machine (G4 mirror door) a type 1 error occurs and the finder notifies me to quit running applications and restart. I was getting a type 2 error the same situation but cured that by turning off the RAM disk.
After I restart, the program MyInvoices, operates incorrectly.
Can I run 9.2.2 without an OSX drive on board? I recently moved the hard drive from a G3 beige desktop with another drive running Jaguar. I use this machine for QuarkXpress production work and invoicing.
I was thinking I should wipe the drive and downgrade to 9.1. If I do, what formatting should I use for the hard drive (HFS+)?

The G3 beige now starts and runs without making the breaking glass sound.
Using TechTool Deluxe 2.5.4 on the simple test all systems pass, fpu, ram, (even my over clocked) processor, drive.
Tried TechTool again standard test, Ram only, system froze following the Vram test. Mouse moves cursor, clock stops.
Tried TechTool again using the os on the tech Tool disk (9.0.4), passed ram including vram. Mouse moves cursor, clock stops.
Tried TechTool again standard test running from 9.2.2 on hard drive, froze following vram test.Mouse moves cursor, clock stops.
Restart extensions off. Tried TechTool again standard test running from 9.2.2 on hard drive, froze following vram test. Mouse moves cursor, clock stops.

Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. Does anyone know what the problem is?

I am running a 7 year old MacBook Pro 15. Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. I did not have this problem with Mavericks OSX. Does anyone know what the problem is and is there a fix?

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Can I run a set up without a cd for a WRT54g V5

can I run a set up without a cd for a WRT54g V5 ?

We could configure the Router by accessing the Router's
Configuration Page, and not necessarily need you have to
configure the Router only with the Setup CD
If you face any difficulties,
Let us know the Name of your Internet Service Provider,
Router Model and Version Number

Can not run DBCA on Linux

Hi,
on 11g , Linux el5, can not run DBCA and receive :
[oracle@localhost ~]$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x00002aaab748c9f1, pid=8789, tid=48011056844432
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_17-b03 mixed mode)
# Problematic frame:
# C [libclntsh.so.11.1+0x62a9f1] snlinGetAddrInfo+0x1b1
# An error report file with more information is saved as hs_err_pid8789.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
AbandonAny idea.
Thanks.

thanks to all and sorry of being late. Suddenly occupied by another emergency.
Any way for xhost+ :
[root@localhost ~]# xhost +
access control disabled, clients can connect from any host
[root@localhost ~]#
[oracle@localhost ~]$ xhost +
access control disabled, clients can connect from any hostAnd for jvm ,
how to upgrade your JVM like 1.5.0_22 & greater versions ?
regards.

How can i run the example programme without hardware

Hi,
We are using NI-9233 for our Project. We would like to run the example programme, the NI-9233 getting started(host).vi ... I would like to ask that how can i run the Programme without Hardware.& How shall i get the input signal (simulating signal)?because we would like to test it while we are waiting for the hardware to be delivered .
thanks
Best regards

As Mike indicated , " you can use MAX to simulate some (not all) DAQmx devices. There's a NI-USB-9233 device that you can probably use. Open MAX, then expand "My System", the expand "Devices and Interfaces", then right-click on "NI-DAQmx Devices" and select "Create New NI-DAQmx Device -> NI-DAQmx Simulated Device". Select the device from the list. See the online help for MAX for further help.
If you don't see "NI-DAQmx Devices" in MAX you need to install NI-DAQmx. You can download it from NI here. "
hi,
the link you gave me to download is "NI-DAQmx Devices" ... There is no software to download for Labview 8.2.1. So should i use 8.1 or 8.3 instead of 8.2.1 ? If not, can you tell me the CD no. that includes the "NI-DAQmx Devices" folder of Labview 8.2.1 version? Because we can get the cd from our school's component store. Thank you so much.
Best Regards,
Su

Can't run JMF Applet in IE

OS: win2000 professional
JRE: Jdk-1.4.0._01
JMF: 2.1
Borwser: IE 5.0
I have completed installing the JMF, but no JMF Applet
can be shown in IE, the messages always are
"class Not Found, javax.media.ControllerListener" or
"class Not Found, javax.media.Player"
anyone can help me? thanks!

I think I found where the problem comes from.
In one machine I installed jmf as admin I found following registy key:
LocalMachine--software--microsoft--javavm
there is one value called classpath which contains the jmf directory.
I suppose this key make java plug-in find our jmf library.
However in anothre machine I installed jmf without admin privalages. I didn't see that key contain my jmf directory. This is because I don't have the privalages to modify this key. The installation doesn't give me any warning messages. I think this is the problem.
When Iinclude that tag <APPLET archive="jmf.jar" in the html pages. The java console said that the applet don't have the permission to use capture audio devices. So..... It still don't work
Any suggestions?

Can we Run 10g Forms & Reports without Application Server

Currently We are using form 5 and reports 3.5
we are willing to upgrade .
we are told that we can upgrade only to 10g developer suit
and for that Application Server is must
Our requirement is for LAN based application only
Do we have to go-in for application Server
DOes the 10g forms and 10g reports have Form server /report server which can help us to run application using Browser but without IAS
CK

Chaand,
for production environments you must run Forms and Reports through Oracle Application Server as there no longer is a client-server runtime. For development puposes tehre is a HTTP server in Oracle Developer Suite that is used to run both servers.
Frank

Can't run apps. in Linux with USB-6008

I am using USB-6008 by installing nidaqmxbase-1.5.0 under RH 2.4-20 without any error.
(I installed package with the device unplugged).
I run /usr/local/natinst/nidaqmxbase/bin/lsdaq and get:
    National Instruments DAQ Devices
    Found the following DAQ Devices:
    NI USB-6008: "Dev1"    (USB0::0x3923::0x717A::00E1D95B::RAW)
I run /usr/local/natinst/nidaqmxbase/examples/ai/acquire1Scan application using Dev1/ai0 and get:
    DAQmxBase Error: Physical channel specified does not exist on this device.
    Refer to the documentation for channels available on this device.
I do see 2 drivers are loaded. They are nipalk and nikal. But I don't know what is the driver associated with Dev1.
And I don't see any Dev1 node under /dev (assume it is a character driver).
I need help.
John

John,
When you install the USB-6008 in Linux you need to have the daqmxbase firmware
loaded onto the device. If this device was ever plugged into a windows
machine it is likely that the daqmx firmware was loaded onto the device.
If the daqmx firmware is on the device the USB-6008 will install, however you
will not be able to use the device. In order to change the firmware back
to daqmxbase you need to plug the USB-6008 back into a windows machine and
install the daqmxbase firmware. I have included a link below that walks
you through this process.
http://digital.ni.com/public.nsf/websearch/1448A8AC665EE0EA8625703F004A4410?OpenDocument
Regards,
Jesse O
Application Engineering
National Instruments
Jesse O. | National Instruments R&D

How can I run an external program without quitting Firefox?

I want to run an external program from within Firefox, much as Outlook express is run from the email button. How do I set this up?
Firefox doesn't import my Bookmarks from the listed html file. Any cure for this?

I don't want to run the mail program, I want to run another program.
Maxthon allows me to do this using External Tools. Does Firefox allow me to run other programs without leaving Firefox?
2. Firefox allows me to load an html file which contains my bookmarks, but it doesn't load the bookmarks file. is there a solution?

Can't run eclipse under Linux OS

When I run eclipse_linux_gtk 3.1 under Linux ( kernel 2.6.7, gnome 2.8, sun jdk 1.5.0), I got the following error message.
What is wrong with it?How should I do to make it work?
!SESSION Oct 11, 2004 00:36:59.306 ---------------------------------------------
eclipse.buildId=M200409161125
java.version=1.5.0
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_US
!ENTRY org.eclipse.osgi Oct 11, 2004 00:36:59.334
!MESSAGE Startup error
!STACK 1
java.lang.RuntimeException: Exception while creating System Bundle: Unable to find system bundle manifest file.
at org.eclipse.osgi.framework.internal.core.Framework.createSystemBundle(Framework.java:253)
at org.eclipse.osgi.framework.internal.core.Framework.initialize(Framework.java:152)
at org.eclipse.osgi.framework.internal.core.Framework.(Framework.java:95)
at org.eclipse.osgi.framework.internal.core.OSGi.createFramework(OSGi.java:90)
at org.eclipse.osgi.framework.internal.core.OSGi.(OSGi.java:31)
at org.eclipse.core.runtime.adaptor.EclipseStarter.startup(EclipseStarter.java:215)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:127)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.eclipse.core.launcher.Main.basicRun(Main.java:185)
at org.eclipse.core.launcher.Main.run(Main.java:704)
at org.eclipse.core.launcher.Main.main(Main.java:688)
!SESSION Mon Oct 11 00:36:59 GMT 2004 ------------------------------------------
!ENTRY org.eclipse.core.launcher 4 0 Oct 11, 2004 24:36:59.376
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.NullPointerException
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:138)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.eclipse.core.launcher.Main.basicRun(Main.java:185)
at org.eclipse.core.launcher.Main.run(Main.java:704)
at org.eclipse.core.launcher.Main.main(Main.java:688)

I love eclipse and run it under windows very well.
Now,I install a Linux OS in my computer,and want to work under it, but I get the same error log everytime.
What others do who use eclipse under Linux?Is it work well?

Can not run reports on Linux OS

Hi All,
We have running Oracle Forms and Reports Services 10g (9.0.4) on Windows 2003 Server.
The Application Works fine, and reports are generated successfully.
But when we access the same application by using Linux OS (RHEL 4.4),
The forms works fine but Linux OS could not run the report.
This seems to be a configuration problem.
Any Clues.
Thanks and Looking Forward.

Check rwserlvet.conf here you will see comment out  IN the part for the reports engine two lines, one is the Path for Reports the other is for TMP for reports, try to uncomment path and use this, then restart the reports server and see if it works.
Hope this helps.
Regards.

Can I run with my iphone without damaging it?

I have heard rumors that running with your iphone can cause damage to the phone. Is this true?

KiltedTim wrote:
I would avoid strapping it to the bottom of your shoe as well.
Now you tell me!!!

How Can I run Oracle 11g Form without OC4J

Dear All,
I was installed Oracle Data Base and Forms 11g but when I try to run the Form I can't because there's no OC4J.
Thanks
Eyad

Thank you, but when I start weblogic
from { d:\Oracle\Middleware\user_projects\domains\ClassicDomain }, it's ask me about for username and password.
but Unfortunately forget it. How can I reset it ? or How can I make another username and pass word
JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=512m
WLS Start Mode=Production
CLASSPATH=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;d
:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic
patch.jar;d:\Oracle\MIDDLE~1\patchocp371\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;D:\Oracle\MIDDL
E~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
ib\weblogic.jar;d:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3
.6.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;d:\Oracle\MIDD
LE~1\modules\ORGAPA~1.1/lib/ant-all.jar;d:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/
lib/ant-contrib.jar;D:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;d
:\Oracle\Middleware\oracle_common\modules\oracle.dms_11.1.1\dms.jar;d:\Oracle\Mi
ddleware\oracle_common\modules\oracle.jmx_11.1.1\jmxframework.jar;d:\Oracle\Midd
leware\oracle_common\modules\oracle.jmx_11.1.1\jmxspi.jar;d:\Oracle\Middleware\o
racle_common\modules\oracle.odl_11.1.1\ojdl.jar;d:\Oracle\Middleware\Oracle_FRHo
me1\opmn\lib\nonj2eembeans.jar;d:\Oracle\Middleware\Oracle_FRHome1\jdbc\lib\ojdb
c6.jar;d:\Oracle\Middleware\Oracle_FRHome1\opmn\lib\optic.jar;d:\Oracle\Middlewa
re\Oracle_FRHome1\opmn\lib\iasprovision.jar;d:\Oracle\Middleware\oracle_common\m
odules\oracle.ldap_11.1.1\ldapjclnt11.jar;d:\Oracle\Middleware\oracle_common\jli
b\rcucommon.jar;d:\Oracle\Middleware\Oracle_FRHome1\opmn\lib\opmneditor.jar;d:\O
racle\Middleware\Oracle_FRHome1\opmn\lib\wlfullclient.jar;d:\Oracle\Middleware\o
racle_common\modules\oracle.adf.share_11.1.1\commons-el.jar;d:\Oracle\Middleware
\Oracle_FRHome1\jlib\dfc.jar;d:\Oracle\Middleware\Oracle_FRHome1\dvt\lib\dvt-jcl
ient.jar;d:\Oracle\Middleware\Oracle_FRHome1\dvt\lib\dvt-utils.jar;d:\Oracle\Mid
dleware\oracle_common\jlib\ewt3.jar;d:\Oracle\Middleware\oracle_common\modules\o
racle.iau_11.1.1\fmw_audit.jar;d:\Oracle\Middleware\Oracle_FRHome1\oui\jlib\http
client.jar;d:\Oracle\Middleware\oraclecommon\modules\oracle.idm_11.1.1\identit
ystore.jar;d:\Oracle\Middleware\oracle_common\modules\oracle.idm_11.1.1\identity
utils.jar;d:\Oracle\Middleware\oracle_common\modules\oracle.jps_11.1.1\jaccprovi
der.jar;d:\Oracle\Middleware\oracle_common\modules\oracle.jps_11.1.1\jacc-spi.ja
r;d:\Oracle\Middleware\Oracle_FRHome1\ord\jlib\jai_codec.jar;d:\Oracle\Middlewar
e\Oracle_FRHome1\ord\jlib\jai_core.jar;d:\Oracle\Middleware\oracle_common\module
s\oracle.oc4j-obsolete_11.1.1\jazn.jar;d:\Oracle\Middleware\oracle_common\module
s\oracle.oc4j-obsolete_11.1.1\jazncore.jar;d:\Oracle\Middleware\oracle_common\jl
ib\jewt4.jar;d:\Oracle\Middleware\Oracle_FRHome1\jlib\jta.jar;d:\Oracle\Middlewa
re\oracle_common\modules\oracle.ldap_11.1.1\ldapjclnt11.jar;d:\Oracle\Middleware
\Oracle_FRHome1\lib\mail.jar;d:\Oracle\Middleware\Oracle_FRHome1\jlib\netcfg.jar
;d:\Oracle\Middleware\Oracle_FRHome1\jlib\oracle_ice.jar;d:\Oracle\Middleware\or
acle_common\jlib\share.jar;d:\Oracle\Middleware\Oracle_FRHome1\jlib\zrclient.jar
;d:\Oracle\Middleware\Oracle_FRHome1\reports\jlib\aolj.jar;d:\Oracle\Middleware\
Oracle_FRHome1\reports\jlib\confmbean.jar;d:\Oracle\Middleware\Oracle_FRHome1\re
ports\jlib\runtimembean.jar;d:\Oracle\Middleware\Oracle_FRHome1\reports\jlib\rwa
dmin.jar;d:\Oracle\Middleware\Oracle_FRHome1\reports\jlib\rwenv.jar;d:\Oracle\Mi
ddleware\Oracle_FRHome1\reports\jlib\rwrun.jar;d:\Oracle\Middleware\Oracle_FRHom
e1\reports\jlib\rwxdo.jar;d:\Oracle\Middleware\Oracle_FRHome1\jlib\rts2.jar;d:\O
racle\Middleware\Oracle_FRHome1\common\wlst\lib\adf-share-mbeans-wlst.jar;d:\Ora
cle\Middleware\Oracle_FRHome1\common\wlst\lib\mdswlst.jar;d:\Oracle\Middleware\O
racle_FRHome1\common\wlst\resources\auditwlst.jar;d:\Oracle\Middleware\Oracle_FR
Home1\common\wlst\resources\jps-wlst.jar;d:\Oracle\Middleware\Oracle_FRHome1\com
mon\wlst\resources\jrf-wlst.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\
resources\oamap_help.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resourc
es\oamAuthnProvider.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resource
s\ossoiap_help.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resources\oss
oiap.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resources\sslconfigwlst
.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resources\wsm-wlst.jar;D:\O
racle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLS
ERV~1.3\common\derby\lib\derbyclient.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\li
b\xqrl.jar
PATH=d:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\native;d:\Oracle\MIDDLE~1
\patch_ocp371\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\nativ
e\win\x64;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;d:\Oracle\MIDDLE~1\modules\OR
GAPA~1.1\bin;C:\PROGRA~1\Java\JDK17~1.0_1\jre\bin;C:\PROGRA~1\Java\JDK17~1.0_1\b
in;d:\Oracle\MIDDLE~1\ORACLE~2\BIN;d:\OracleDB\product\112~1.0\dbhome_1\BIN;C:\P
ROGRA~1\COMMON~1\MICROS~1\WINDOW~1;C:\PROGRA~2\COMMON~1\MICROS~1\WINDOW~1;C:\PRO
GRA~2\Intel\ICLSCL~1\;C:\PROGRA~1\Intel\ICLSCL~1\;C:\PROGRA~2\AMDAPP~1\bin\x86_6
4;C:\Windows\System32;C:\Windows;C:\Windows\System32\wbem;C:\Windows\System32\WI
NDOW~1\v1.0\;C:\PROGRA~2\ATITEC~1\ATI.ACE\CORE-S~1;C:\PROGRA~1\Intel\INTEL(~1\DA
L;C:\PROGRA~1\Intel\INTEL(~1\IPT;C:\PROGRA~2\Intel\INTEL(~1\DAL;C:\PROGRA~2\Inte
l\INTEL(~1\IPT;C:\PROGRA~1\Sony\VAIOIM~1\;C:\PROGRA~2\Sony\VAIOST~1;C:\PROGRA~2\
WIC4A1~1\Shared;d:\Oracle\MIDDLE~1\ORACLE~2\opmn\bin;d:\Oracle\MIDDLE~1\ORACLE~2
\opmn\lib;d:\Oracle\MIDDLE~1\ORACLE~2\perl\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\ser
ver\native\win\x64\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.7.0_11"
Java(TM) SE Runtime Environment (build 1.7.0_11-b21)
Java HotSpot(TM) 64-Bit Server VM (build 23.6-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK17~1.0_1\bin\java -server -Xms256m -Xmx512m -XX:MaxPermSi
ze=512m -Dweblogic.Name=AdminServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WL
SERV~1.3\server\lib\weblogic.policy -Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLS
ERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Xms512m -
Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m -Doracle.home=d:\Oracle\Middlewa
re\Oracle_FRHome1 -Ddomain.home=d:\Oracle\Middleware\user_projects\domains\Class
icDomain -Djava.ext.dirs=d:\Oracle\Middleware\Oracle_FRHome1\jdk\jre\lib\ext -Do
racle.security.jps.config=d:\Oracle\Middleware\user_projects\domains\ClassicDoma
in\config\fmwconfig\jps-config.xml -Doracle.instance=d:\Oracle\Middleware\asinst
_1 -Doracle.instance.name=asinst_1 -Doracle.forms.weblogic=1 -Ddomain.name=Class
icDomain -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1
.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger
-Ddomain.home=d:\Oracle\MIDDLE~1\USER_P~1\domains\CLASSI~1 -Djrockit.optfile=D:\
Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.
server.config.dir=d:\Oracle\MIDDLE~1\USER_P~1\domains\CLASSI~1\config\FMWCON~1\s
ervers\AdminServer -Doracle.domain.config.dir=d:\Oracle\MIDDLE~1\USER_P~1\domain
s\CLASSI~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=d:\Oracle\MIDDLE~1\USER_P
~1\domains\CLASSI~1\config\FMWCON~1\carml -Digf.arisidstack.home=d:\Oracle\MIDD
LE~1\USER_P~1\domains\CLASSI~1\config\FMWCON~1\arisidprovider -Doracle.security.
jps.config=d:\Oracle\MIDDLE~1\USER_P~1\domains\CLASSI~1\config\fmwconfig\jps-con
fig.xml -Doracle.deployed.app.dir=d:\Oracle\MIDDLE~1\USER_P~1\domains\CLASSI~1\s
ervers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternat
eTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Ora
cle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.
pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwc.oracle.h
ome=D:\Oracle\Middleware\Oracle_FRHome1 -Dclassic.oracle.home=D:\Oracle\Middlewa
re\Oracle_FRHome1 -Dweblogic.management.discover=true -Dwlw.iterativeDev=false
-Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=d:\O
racle\MIDDLE~1\patch_wls1036\profiles\default\sysext_manifest_classpath;d:\Oracl
e\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Ser
ver
<Feb 4, 2013 6:20:47 PM AST> <Info> <Security> <BEA-090905> <Disabling CryptoJ J
CE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 4, 2013 6:20:48 PM AST> <Info> <Security> <BEA-090906> <Changing the defaul
t Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 4, 2013 6:20:48 PM AST> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.6-b04 from Oracle
Corporation>
<Feb 4, 2013 6:20:49 PM AST> <Info> <Management> <BEA-141107> <Version: WebLogic
Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050
WebLogic Server 10.3 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Feb 4, 2013 6:20:50 PM AST> <Info> <Security> <BEA-090065> <Getting boot identi
ty from user.>
Enter username to boot WebLogic server:
}

Can I run my HP Laptop without battery if it cannot be removed (mechanism battery access jammed)

I don't know if my first message got posted, so I apologize if this is a double post:
Hi. I have an HP Laptop from 2008. I had to replace the battery last year. Stupidly, I kept the Laptop plugged into A/C. The battery started losing power a week or so ago, losing 2-3 % daily. Today it is at 45%. Problem is-I cannot remove the battery-the mechanism allowing access to battery is now jammed. Is there anything I can do to preserve my Notebook? I should add I am somewhat new to technology (as of 2008) and middle-aged. Thanks in advance!

Hi,
Yes you can, the risk is w/o battery when having main (AC) problem specially losing power suddenly data on HDD may be corrupted.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Re: Can I run JMF in linux without X

Similar Messages

Maybe you are looking for