Re: Can not Assocate User with Handheld device
Same thing, have you find a solution ?
Thanks in advance
rgds
Hub
> It does not show up in ConsoleOne. Under the HH Object.
>
>
> "Anand Sinha" <[email protected]> wrote in message
> news:M_MSc.923$[email protected]..
> > You mentioned in the other newgrp that the option is grayed out. Where
> > exactly is it grayed out?
> >
> > Regards
> > Anand Sinha
> >
> > "Joe Tietz" <[email protected]> wrote in message
> > news:n5PRc.19$[email protected]..
> > > Can not Assocate User with Handheld device
> > >
> > > ZFH 6.5
> > >
> > >
> >
> >
>
>
bart3321,
First I have separated your request/inquiry because it was added to a message that was over 2 years old. Seems you went to a "shop", and got blocked from assessing needed files. You did not state the error message. Was it permissions? Can you right click on the excel file, change the "Share with" ?
http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/How-to-change-read-only-to-read-write/td-p/2...
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus
Similar Messages
-
I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!
https://support.apple.com/kb/TS1567
Ah, it has been mentioned daily esp since iOS 5 / iTunes 10.5 but has always been there as an issue.
Order of attempts:
Repair the installers
Uninstall EVERY Apple component (auto and manual)
Services: Restart all 3 Apple items (AMS, Bonjour, iPod)
I* always do the last almost, then launch iTunes, and only then connect iPod.
IF you see a yellow alert in Devices and Printers or in Device Manager, then I could find NO WAY to fix or repair other than a clean OS. Something messed up the device driver support.
If/when Windows asks "what to do when it detects iPod"? don't chose any default action, to me, based on hunch and 3 PCs, that seems to mess AMS up for some reason.
Tried with Windows 7 64-bit Pro and Home Premium, and also Deve Preview 8 (which other than the inability to update iOS to 5.0 seems to run better -- except when it comes to AMS thing! so seems Apple is not on the same page writitng drivers. -
Can not create user with useradd
Hi,
the command is (as root):
# /usr/sbin/useradd -c 'Oracle software owner' -d /u01/oracle -g dba -G ocgroup,ocmaint -m -u 1000 -s /usr/bin/ksh oracle
The output is:
UX: /usr/sbin/useradd: ERROR: Inconsistent password files. See pwconv(1M).
ACTIONS TAKEN:
# pwconv : no changes
bash-3.00# wc -l /etc/passwd /etc/shadow
18 /etc/passwd
18 /etc/shadow
36 total
bash-3.00# cat -ve /etc/passwd
root:x:0:0:Super-User:/:/sbin/sh$
daemon:x:1:1::/:$
bin:x:2:2::/usr/bin:$
sys:x:3:3::/:$
adm:x:4:4:Admin:/var/adm:$
lp:x:71:8:Line Printer Admin:/usr/spool/lp:$
uucp:x:5:5:uucp Admin:/usr/lib/uucp:$
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico$
smmsp:x:25:25:SendMail Message Submission Program:/:$
listen:x:37:4:Network Admin:/usr/net/nls:$
gdm:x:50:50:GDM Reserved UID:/:$
webservd:x:80:80:WebServer Reserved UID:/:$
postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh$
svctag:x:95:12:Service Tag UID:/:$
nobody:x:60001:60001:NFS Anonymous Access User:/:$
noaccess:x:60002:60002:No Access User:/:$
nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/:$
ocadmin:x:1001:107:ON-Center Administrator Account:/export/home/ocadmin:/bin/ksh$
cat -ve /etc/shadow
root:VipMkPKbgRZFs:14859::::::$
daemon:x:14858::::::$
bin:x:14858::::::$
sys:x:14858::::::$
adm:x:14858::::::$
lp:x:14858::::::$
uucp:x:14858::::::$
nuucp:x:14858::::::$
smmsp:x:14858::::::$
listen:x:14858::::::$
gdm:x:14858::::::$
webservd:x:14858::::::$
postgres:x:14858::::::$
svctag:x:14858::::::$
nobody:x:14858::::::$
noaccess:x:14858::::::$
nobody4:x:14858::::::$
ocadmin:Ru2SfqpBfDlSM:14858::::::$
PLATFORM DESCRIPTION
SunOS argenlab 5.10 Generic_139555-08 sun4v sparc SUNW,SPARC-Enterprise-T2000I fixed the problem. Somehow the connection and provider properties are defined in machine.config. I did not have anything in my application's web.config. After I moved provider information to my web.config and gave the appliaiton name I was able to create a user account. I do not know at what point the OraAspNetConString properties were added to machine.config.
Thanks -
can 2 different users with 2 different Iphones use the same itune program to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?
Here is your answer:
http://support.apple.com/kb/HT1495 -
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
-
Photo gallery built with adobe edge can not be seen on mobile devices.
photo gallery built with adobe edge can not be seen on mobile devices.
ps: I do not have any email attachment, I do not understand a thing of referringHi, Stefano-
This post might help you figure out how to post your files for us to review:
http://forums.adobe.com/message/5935946#5935946
It's very helpful for us to be able to look at your files to help you with your specific problem.
Thanks,
-Elaine -
OBIEE 11g, can not signin analytics with user admin "Weblogic"?
Hi all,
I have a problem as i can not signin analytic with user Weblogic, with error "An error occurred during authentication. Try again later or contact your system administrator".
then, i create one user other, with admin privilege and sign in ok, same with all other user.
Before i get this problem, i have create one user --> add to a role --> grant permission of some analytic on weblogic folder to this user.
plz tell me what the reason of this problem.
Thanks so much.From Srini's update i see its a bug, but can you give it a try with the below options and also let us know the OBIEE Version?
try to shutdown everything admin,managed and opmn services and then restart everything once everything is up now deploy the old rpd and see if it helps
paste the log files from admin and nqserver.log -
Good day!! I was having two Iphones with same icloud id, later i deleted 1 id from one device, and made 2nd id for this device but same time my old id is stored on other device and i can not change it with another id, can any1 guide me on this issue.
Log in to icloud.com on a web browser and remove the device from "Find My iPhone"
-
My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe -
I can not see my i phone/device on my i tunes?
I can not see my i ohone/device on my I tunes aftre i upgraded to the new verision
all I want to do is add a playlist to my i phone.Hello Andrej,
Devices that use the NI-DAQmx Base driver will not appear with Measurement & Automation Explorer (MAX). Instead, you should use the NI-DAQmx Base Configuration Utility found within LabVIEW under Tools > NI-DAQmx Base Configuration Utility.
Follow the instructions in the following Knowledgebase for loading the correct task list for use with the DAQmx Base shipping examples:
KB 3RRF2088: NI-DAQmx Base Task Configuration Utility Does Not Show PDA DAQ Device
Also, with the new DAQmx Base 2.1, you can now use the CF-6004 Compact Flash Device with the LabVIEW 8.20 PDA Module to target Windows Mobile 5.0 devices.
I hope this helps,
Travis G.
Applicaitons Engineering
National Instruments
www.ni.com/support -
How can OIM provision users with same Display Name in AD?
I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
Status: Rejected
Response: AD user already exists
Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
Thanks!Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
Thanks a lot! -
Logged in as the administrator, I still can not delete users. I click the '-' button, it asks to confirm and nothing happens. It's that simple. OS X Server V4.0.3. Run disk permissions verify/repair several times, no joy.
Any suggestions?Could it be that you're logged in with an account with system administrator privileges but not Open Directory administrator privleges (the difference was more obvious in the old server admin app than the new one from MOS 10.7 + Server 1 and up)?
-
've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?
iPhones require a SIM for activation.
Put the device in DFU mode (google it) and restore via iTunes. -
How can I use Bluetooth with another devices?
How can I use Bluetooth with another devices?
You can set up your FaceTime account in Settings > FaceTime.
-
I just got an iPhone 4s, and I can not connect it with my iTunes from my previous account. I have already tried making another account, however it says that I have the wrong security code even though this is not true. What should I do?
Contact iTunes support. There's a link to it on the bottom of every page in the iTunes store.
Maybe you are looking for
-
Going from one table view to another
Hey there, I am new to creating apps and have a minor problem. I have my table view controller attached to my nav bar and it displays data from an array and has a detail disclosure indicator for 3 rows. I don't know what code to put in the prepare fo
-
How to sync my mac iCal to iPhone 4s?
Is there any instruction on how to sync ical to iphone 4S?
-
User and Group Preferences pane error
I am having difficulty with the Users and Groups in Lion. I did not notice this problem. I can add any users. When I click on users it simply gives t=me the message that It cant open the Users preference pane. Any Ideas?
-
How to make a copy of my install disk in case original is lost/misplaced.
This is Lester, Need advise how to make copy(s) of my install disk for a rainy day. Went to APP'S utility disk and was confused. Advice is appreciated. Thanks to all who respond. L.
-
Unit of measurements are not translatet in SP05 ?
I try to use unit of measurements. It works fine - but I found out - the uom are not translated into other languages. If I logon with data manager with german language into the repo the measurements in the uom-fields appear in english only. Where we