Re: Can't detect end of process with waitFor()

Many thanks!!
Now it's working

Hey erkbizz,
I'm sorry you're running into this recovery issue. Do you have one or two hard drives in your computer? If you have recently replaced the hard drive with a new one, you may need to use the Cyberlink Recovery Utility to prepare the new hard drive for using the recovery discs.
Here is another thread with more information -- including steps to use the Utility
Download the Cyberlink Recovery Utility here

Similar Messages

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

How can i do a destructive processing with my au plug-ins

here is the chapter from logic 8 user manual below,but where is the audiosuite menu? and what's the meaning of "AudioSuite plug-ins can only be used with hardware addressed by the DAE"?
i'm fixing a vocal track,and i need to use a pitch tool to change the origenal file offline.
Using AudioSuite Plug-ins
The Sample Editor allows the use of AudioSuite plug-ins. These plug-ins work
destructively—the result of the editing process is written into the audio file.
Note: AudioSuite plug-ins can only be used with hardware addressed by the DAE
(Digidesign Audio Engine). Any properly installed AudioSuite plug-in will be displayed
in the AudioSuite menu.
anyone help me? i'm in hurry~~~~~

You could, however, open Soundtrack Pro (you could even set this to open from a key command in Logic), and destructively apply AU's from within Soundtrack Pro.
Because you would be applying the AU's on the same Audio File Logic is referencing, Logic should automatically update to reflect these changes, once they are rendered from within STP.

Is there a way to import videos from old VHS tapes so that they can be later accessible to processing with imovie?

Is there any way to import videos from old VHS tapes so that thry can later be processed by imovie?

I recently got a new iPhone, and after restoring all my stuff from my old iPhone via the iTunes restore thing, I had to put all my music on manually, instead of it being restored.
iTunes content is not included with your iPhone's backup - no music, movies, tv shows, podcasts, audio and print books, tones, and apps. All iTunes content must be transferred back to your iPhone when restoring. If you sync music with Sync Music selected under the Music tab for your iPhone sync preferences with iTunes, music is transferred back to your iPhone from your iTunes library when syncing - syncing is followed after the iPhone is restored. If you manually manage music and videos with this selected under the Summary tab for your iPhone sync preferences with iTunes, you must manually drag all music from your iTunes library back to your iPhone. Manually manage music means manually all the way.

Can I have no transaction processing with esql (proc)?

Hello all,
I'm using embedded sql (via proc) and am trying to use the database without transaction processing. I am porting an application from Informix and this is possible with Informix . Is there some way to tell Oracle to autocommit or to turn off transaction processing?
Thank you for your time.

Can you connect? I can not connect to it, but it shows in the finder. (and LG's detector utility)
I get a:
"the version of the server you are tryinng is not supported" when acessing a timemachine volume or via Finder>go>connect to server>afp://<ip>
And fior a standard volume:
"The server may not exist or is unavailble at this time"
(ML Server)

How can I create a chain process with rscrm_bapi

Hello
We have generated a table, as result of the execution of a query with the transaction rscrm_bapi. It's made manually, and now we want to do it in a chain process so that the table will be generated automatically.
How can I do this?. Are there any manual? or Anyone know how to do it, step by step?
Thank you very much.

Hello,
managed the execution of rscrm jobs in PC as follows:
1. Execute query through RSCRM_BAPI transaction
2. goto sm37 and copy the Jobname (the active one)
3. Create following progromm
*& Report /WST/RSCRM_START *
REPORT /WST/RSCRM_START .
parameter: l_bid TYPE sysuuid_c.
CALL METHOD cl_rscrmbw_bapi=>exec_rep_in_batch
EXPORTING
i_barepid = l_bid
4. Execute Programm and fill the Parameter with the Jobname
5. Save as a new program variant and use in PC as a normal program
Very strange and I think not very nice that sap uses the jobname to control the execution....but with this workararount it works very nice.
I hope that helps.
Regards,

Skype can't detect sound card, issue with playback...

Hello
I have just received my Razer kraken 7.1 headset and have installed razer synapse 2.0. I have set up my mic and speakers of the headset through the control panel, my playback is set as the razer kraken 7.1 earphone and the mic is set as the headset microphone through the recording tab. When I launch skype there is no sound produce through the application, however with previous headsets there has been, I have tried going on youtube to see if sound comes through the headset and it does. Previously I have been using a turtle beach z11 which used 3.5mm jacks in to the computer however this new headset is usb operated. When skype opens and I try to call someone it says problem with playback device meaning I can't call anyone at all. However when checking call quality it says everything is working fine even though it isn't.
So far I have tried re-installing skype and restarting my pc none of this has worked so far, I know this isn't likely a fault with the headset as it works with all other programmes I have tried.
I am using a custom built pc with
OS: WIN7 64 BIT Home Premium
GPU: AMD HD7950
CPU: i5-3550
RAM: 8gb 1333mhz
Motherboard: Asus p67 series
Sound card: Onboard 7.1 audio
Any help with my problems would be much appreciated.
-Thanks
George Snell

@gsnell, Please setup your audio device directly in Skype and not only in the windows playback/record interface.
Also, please try to quit synapse 2.0 since it may interfere with Skype.
Also please try with the latest 6.13 version
www.skype.com/en/download-skype/skype-for-windows/downloading/
if nothing helps, Can you please provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-create-log-files under Skype for Windows Desktop and attach it to your post?
Thank you

Can't detect some external displays with Macbook Pro 17"

My macbook pro 17" connects just fine to my Apple Cinema display. But twice now I've tried to use it for presentations where I am connecting to either a video projector or a plasma screen through some sort of switchbox installed in the room. There's a VGA cable I'm supposed to connect to, and I use my DVI-VGA adaptor for that. But the macbook never recognizes the external monitor. In one case, everytime I hit "detect displays" i would see a brief bit of noise on the external screen like it was about to connect, but then nothing -- and Display Preferences showed no evidence of any connected external monitor. In both cases, I know the host systems generally handle Macs just fine. Is there something different about a Macbook Pro with dual-DVI? A design flaw or a mysterious switch that needs to be set right? Or maybe there's a glitch in my specific macbook??

Have you tried resetting PRAM…
http://docs.info.apple.com/article.html?artnum=2238
… ?

Schedule Export Processes with Custom Query

Hi,
Can I use Schedule Export Processes, with a custom query over HZ_PARTIES and HZ_LOCATIONS, in order to export suppliers data in a specific field order with join conditions?
I used Schedule Export Processes with "PARTY", selecting proper fields, but exported csv is in a different field order than the required by an external system.
Thanks,
Erick.

Can you elaborate on the issue here. Are you looking for a way to run "ad-hoc" SQL queries for the filters ? I do not think that is possible, depending on your environment you may be able to create a custom view object to match your requirements.
As for the orders I think you should be able to control the order using the sequence as the FAQs state:
What happens if I change the sequence number or header text?
Changing the sequence number changes the order of the attributes in the exported data file. Changing the header text enables you to give a more intuitive meaning to the attribute and the associated data.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Mac Pro USB port can't detect SD card reader.

My new macpro ( 2014) can't detect SD card reader with all 4 USB port ! I try to test with macbook Pro it's work properly ! What wrong with my USB port ?

This is too obvious, but neverthelees:
Have you checked that the card works on another computer?
Does a different USB or FW device work on the same computer port?
Is there a card actually in the reader?

Ending a process chain with abap program

Hello friends.
Can anyone help me please?
I have a problem with a process chain in BW.
The process chain is triggered by the MF BP_EVENT_RAISE in an custom MF. While the process chain works, the custom MF is monitoring the chain´s log.
This process chain have 2 steps: one is the initial process and the other is a ABAP program. In the abap program there are validations and if exists some error, the program abort and this job (BI_PROCESS_ABAP) is cancelled. The problem is that i have to go to the Tx. RSPC and view the logs fro this chain and in these moment ends th custom MF. In other wors, the MF ciustom ends until i go to the tx RSPC for view the logs.
I need that the program ends the process chain naturally.
Thanks for your help.
Regards.

Hi,
You can end a process chain by seeing the variant name and instance name of teh process chain from and finding its corresponding log id,type of process from the table RSPCPROCESSLOG and then executing the standard FM RSPC_PROCESS_FINISH. Here you will have to give the log id,type of process ,vairant name and instance name alongwith the status of the process chain as R to end the process chains.
If you want to aurtomate it you can do that by creating a Z program which will read LOG ID and teh TYPE of process from table RSPCPROCESSLOG on the basis of variant name and the instance name of the process chain and the execute the function module RSPC_PROCESS_FINISH from inside the program.
Navesh

AS3 - 1) Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place; 2) Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true - ActionScript 3 - flash cs3 cs4

Hi folks,
Ronny's here again on forums, having particularly 2 (two) questions/problems to resolve:
1) Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place
2) Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true
attached is the .zip file (as3_Countdown Timer_ver 1.0.1_by Ronny Depp.zip) with all flash source files containing:
a) The FLash Source (file: timer_module.fla) - (FLA flash source file - Flash CS3 Professional, Flash Player 9, actionscript 3.0)
b) com.othenticmedia.utils.dateAndTimeManagement package including 2 .as actionscript 3.0 Class files.
       i) com.othenticmedia.utils.dateAndTimeManagement.DateAndTimeManager Class in the said package. (file: DateAndTimeManager.as)
       ii) com.othenticmedia.utils.dateAndTimeManagement.CountdownTimer Class in the package. (file: CountdownTimer.as)
c) The compiled SWF file version of this Application's blueprint. (file: timer_module.swf).
What i need to confirm is: ........................................................ see the next post of mine. (for Problems need to be Resolved)

Problems to Resolve:
Problem#1) - Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place.
Problem#2) - Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true;
Problem#1 Description:
I need to pinpoint the Logical TimeSync Exception, i am still unable to figure out. That is I'm using a webservice in my Application to Synchronize the Time with the actual ET (eastern time) with accomodation of auto-adjustment for EDT GMT-4 (eastern daylight time) & EST GMT-5 (eastern standard time), times. I am using the zipcode: "10012" to pass it to the Web Service in urlRequest object, to retrieve the Current ET eastern time according to EDT & EST time settings for Manhattan/Brooklyn areas or others within New York, NY 10012.
Currently the Web Service is returning accurate date/time based on local EDT GMT-4 daylight time.
Is there some defined set of dates for EDT & EST times for New York region that I can check for to ensure the correct Dates/Times for Eastern Time in New York area ??? I am using NY zipcodes because i am sure to get correct ET values.
The Major Problem Part: is I need to correct the time by 2 seconds or approx. 2 secs, some millisecs.
When I retrieve the Time Value from WebService, it lags behind for 2 seconds as compared to DateObj i create using computer's local time, on my Windows XP Service Pack 2 with Automatic Updates turned-on. And I'm sure about my Windows will be having latest updates for Time Management already installed. I also added the 2 secs. to the TimeSync(ed) Date to make correction to this Date obj.
I call my custom fucntion addSeconds(dateObj:Date, secs:int) to add 2 seconds to the Date by Converting Seconds to Milliseconds.
Please comb through the as code in files attached and Help Me Out !!!
Problem#2 Description:
Secondly I need to Detect the End of Stream state while using FLVPlayback component, an rtmp:// live Stream from FLASH MEDIA SERVER.
I need to Play a YuMe Post-Roll Ad when Steam Finishes/Ends.
Live Broadcast Stream Event starts every night on Wednesdays & Saturdays exactly at 10:59 PM EDT GMT-4.
Live Events only Streams/Broadcasts the stream for 50secs. exactly. When [playback stopped] it plays a PostRoll Ad and after the CountdownTimer again comes back to life. The Next upcoming Event is calculated & the Countdown begins until Next Event's time/date is reached.
Here is the code on the frame 1 on the MainTimeline: (rest of the params like source, volume, skinAutoHide are Set using Property Inspector for FLVPlayback instance on Stage)
//myStream instance of FLVPlayback is on the Stage
myStream.isLive = true;// Frame 1 Actions in the FLA
myStream.addEventListener(VideoEvent.COMPLETE, onEndOfStream);
myStream.addEventListener(VideoEvent.STATE_CHANGE, onState);
myStream.addEventListener(String(VideoError.NO_CONNECTION), onStreamError);
myStream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
/*if(myStream.stopped){
     trace("tracy: "+myStream.state);
} else if(myStream.state == VideoState.STOPPED){
     trace("tracy: "+myStream.state);
function onStreamError(event:VideoError) {
     trace(event.code + "\n\t" + event);
function onState(event:VideoEvent) {
     trace(event.state + "\n\t" + event.toString());
function onEndOfStream(event:VideoEvent) {
     trace(event.state + "\n\t" + event.toString());
function netStatusHandler(event:NetStatusEvent):void {
     switch (event.info.code) {
          case "NetConnection.Connect.Success":
               //connectStream();
               break;
          case "NetStream.Play.StreamNotFound":
               trace("Stream not found: "/* + myStream.source*/);
               break;

My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can i fix this without turning off iCloud?

My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
Does anyone know how to fix this?
Thanks!

I am replying to my own post here as I seem to have fixed the problem.
I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
one more bug in a complicated system I guess

My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders. What else can i do? Please help:(

My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(

Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all

Re: Can't detect end of process with waitFor()

Similar Messages

Maybe you are looking for