Re: Cannot access the D drive on my Satellite Pro A10
I have reformatted home edition on my Satellite Pro A series notebook it will not let me access the D drive and I think I need the drivers for it.
It says the device is working correctly and you can see it in the removable storage devices. There is an error message "d/ drive is not accessible I/O device. I have looked on the downloads for cd-rom drivers but there doesn;t seem to be any
Please help me?
Message was edited by: mcgarvellous
Hello
One very useful thread you can find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=97395
Please let us know if the problem will be solved.
Similar Messages
-
Need to know the display driver model for Satellite Pro A10
Hi! I'm trying to find the exact display chipset model on my satellite pro A10. The driver on the toshiba website is not updated, and I can't use the correct resolution (19" Wide or 1440x900) on my external display.
At one time before, I've could update the driver correctly, just searching by "Intel 82852/82855 GM/GME" generic driver and "extreme graphics" software at Intel website...
But now, on Intel website they ask for the accurate model, meaning, if it's 82852 or 82855, and also if it's GM or GME...
Can u plz give the specific model?
My computer is a celeron 2500MHz, with 1Gb RAM, and 30Gb HDD (standart)
Thanx in advance...Hi,
i suppose no one can answer my question... Does anyone know where can i get this information?...
Aprecciate your help.
Thanks in advance... -
I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.
Try resetting the printing system:
OS X Mavericks: Reset the printing system
Next try deleting the system and reinstall the printer..
BTW this is Mac Pro desktop forum -
I tried to put a copy of windows xp on a dos partition on my harddrive partitioned for mac pro os x maveriks 10.9.3 but with a dos partition fat32 for the windows; but when I tried to reboot I cannot now access the hard drive. Sometimes I get a white page with a question mark and sometimes I get a black screen with a blinking curser at the top. I have a backup mac with lion which I am now using to comunicate.
Windows XP has a notorious reputation for crapping on multiple partition boot blocks, including in your case, OS X.
There are three options.
Boot into Recovery (Press and hold command+R at boot)Choices
Restore from Time Machine backup
Retrieve and install current version of OS X from Apple Servers
Boot into Internet Recovery (Press and hold option+command+R at boot)
Requires Mac that shipped with OS X Lion or later
Retrieves and installs original version of OS X that shipped with the machine
Must update to Mavericks again
Restore user data from Time Machine
Apple Retail Store - Genius Bar appointmentSee if Apple will reinstall OS X Mavericks for you
When you resurrect your machine, follow Eric Root's advice about Boot Camp, or a Virtual Machine. Boot Camp v5.1 on Mavericks no longer supports Windows XP, Vista, or Enterprise versions of Windows 7 or 8. -
How can i access the hard drive in a satellite A30?
I have just bought a new hard drive and have been startled by the lack of information on the internet with help to access the hard drive. Please help. I have the satellite a30-203. Thanks, Daniel Short
Hi daniel,
turn your A30 upside down. Then you need to remove one screw in order to remove your optical drive. After this you will see the HDD. Remove 4 screws that secure your HDD from the computer. Then pull back the hdd using the back brackets in the same way like you pull out your optical device.
Hope this will help. -
Can I install a DVDRW drive on my Satellite Pro A10?
I would like to upgrade the DVD ROM/CDRW drive (SD-R2412) on my Satellite Pro A10 to a DVDRW drive so I can burn DVDs. I have purchased a Toshiba DVDRW drive (TS-L632), as it is exactly the same size and shape as the existing DVD ROM drive, the same voltage (5v) and same connector.
However, after installing and turning on the laptop, it is not recognised as being installed ie, there is no sign of it at all on the computer. Is this because the laptop is totally incapable of supporting a DVDRW drive, or have I bought an incompatible device? If so, is there a compatible DVDRW drive?
Thanks in advance,
fred.
PS the exact model of Satellite Pro is PSA15E-0115Q-ENHello
All ODDs cannot be used on every notebook model. It depends on pin assignment. Toshiba offers the list of all compatible drives in the Users Manuals document.
Ive checked Users Manuals for your notebook model and there you can find list of all compatible optical disc drives you can use with your notebook model. Check pages 4-8.
Choose the best one.
If you don't have it visit Toshiba download page. There you can find it. -
My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?
WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99. -
My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.
Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra -
I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.
I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
OSX 10.10.3
Best. -
My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help Please?
If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide. -
I cannot access the tc hard drive
Greetings, I cannot access my hard drive after making some adjustments in the port settings. I have a pc. Am I missing something?
OK.
So, let me see if I understood correctly.
1) I bridge the ISP modem (in the meanwhile, I found how to do it)
In this way the router should work as a simple modem and "forward" data to the TC through the ethernet cable without doing much. Is it more or less so?
2) I set the TC with PPPoE connection with my username and password provided by the ISP for generic modems (I managed to found also these data)
At this point it should work, right?
Thanks a lot! -
Cannot Access the Service Partition after installing Lenovo Driver and Application Installation
I recently upgraded my Lenovo 3000 H210, M/T 5355-2NU from Windows Vista Home Premium (64-bit) to Windows 7 Home Premium (64-bit) with the media received through the Windows 7 Home Premium Upgrade Fulfillment Program.
I installed the 64-bit version of the Common Components Installation v1.0.0.8 and restarted the computer and then installed the 64-bit version of the Lenovo Driver and Application Installation program, v5.1.0.0900. After
restarting the computer, I receive a message box stating "Cannot access the Service Partition". If I click on
Lenovo Driver and Application Installation on the Start Menu, I receive an error that the installation has not
completed. Restart to complete the installation. If I restart the computer, I am back to the first error.
Any idea how to resolve this situation?
Any help is greatly appreciated. Thanks in advance.
-LarryI am having the exact same problem. It's driving me nuts. I also downloaded and attempted to reinstall the factory software from Lenovo's site. It installs but will not launch, giving me the following error message: "This software is for intallation on a Lenovo computer." Or words to that effect.
Hopefully someone knows the answer. Tried tech support twice. Ugh... Thanks in advance.
Lenovo 3000 H210 Desktop, 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive -
Time Machine cannot access the external WD drive - help!
Help!
I have installed Lion OS on my newish iMac (naively thinking that Apple was diferent from Microsoft in not fully testing their OS releases) but now I am without backup because Time Machine can no longer access the NAS drive.
It seems Apple has changed the Authentication Protocol and now most drive manufacturers' products are not compatible with Time Machine, including WD, Iomega, and LaCie.
These drive manufacturers are working on firnmware upgrade solutons but are reportedly weeks away from a fix, does anyone have a workaround?
It is a shock to me (as a new Mac user) that Apple would miss this rather important problem, and not forewarn potential upgraders that they will not be able to backup using time machine.
CliveYou have just learned a valuable lesson - no matter who is writing the software it is often better to let others go first. To be fair to Apple, Lion has been in the hands of developers for months and many have been testing their software and hardware to be ready for opening day. Others waited until Lion shipped and typically it is hardware developers who wait.
-
I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..MichaelI am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '2011-03-25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure -
Cannot access mac fusion drive in bootcamp windows 7
My Fusion drive imac cannot access the Mac fusion drive in bootcamp windows 7. even I installed the bootcamp 4.1on windows 7. It is trouble as I cannot get my file in the mac drive in windows.
I don't have this problem in my old imac 2008.See iMac (27-inch, Late 2012): Boot Camp alert with 3TB hard drive
Maybe you are looking for
-
After upgrading to mountain lion e-mail no longer pushes to my i-Phone
after upgrading to mountain lion e-mail no longer pushes to my i-Phone I have to launch the mail app on phone to retrieve mail now
-
FCP won't Show/Unhide; Must Force Quit
Always troubleshooting Studio program errors and here's another one... This just started happening yesterday. I will Cmd+H to hide FCP and am unable to bring the program back up. Right-clicking and selecting "Show" or any of the other options do not
-
We are setting up registrations for a paid event and have bought a SSL certificate for our site. Everything works fine when the registration page is accessed through IE, Chrome, Opera or Safari (which list StartCom Class 2 Primary Intermediate Server
-
I am running windows 8 and the time capsule drops my connection all the time. Is there a way to fix this issue? I have tried everything I have seen on message boards and nothing works. I am sick of having to reconnect to the internet every few minu
-
F4 help problem at runtime in ITS (Invalid 'IQ' parameter)
Hi All, We have implemented ITS in EP views. When we run a transaction eg. pa30 ,push the F4 help button for the field, fill some field of the Search window and push the button Search . An exception occurred, which is assigned to class 'CX_SY_DYNAMIC