Re: Cannot find a Mouse Driver for my P300-156 which is now running Windows 7

Hi,
I have just recently upgraded my Satellite P300-156 Laptop from Vista to Windows 7 32bit (I am not particularly computer literate and had no idea that this wonderful new operating system might not run properly on modern laptops).
Have had a nightmare, as when starting the computer the screen is oversized and the mouse and keyboard don't work. It is a bit intermittent - occasionally it does work. I have had long conversations and numerous scans done by Microsoft and it now appears that the problem is the drivers are not loading up correctly. When we looked at the Device Manager we could see little yellow Exclamation marks (bangs as he called them) bext to the Display Drivers and the Mouse and Other Pointing Device Drivers.
My Windows engineer had a look on this website and could not locate a driver for the Mouse and Other Pointing Devices. Does anybody know if there is one out there? I cannot believe I may not be able to utilise Windows 7 on this laptop and may have to go back to the agony of using Vista. It seems crazy.
Hope somebody may be able to help.
Many thanks.

Hi Deborah23,
As far as I know Satellite P300-156 belongs to PSPC4E series. So I have checked official Toshiba website and I cant find Windows 7 32bit drivers. Now you have to options:
1.You try Vista 32bit drivers as Jeka wrote. From my own experience I can say that the most Vista drivers also work on Windows 7 so its worth a try!!!
2.You try Windows 7 32bit drivers from other P300 models. That means if you search without model number, you can find all Windows 7 32bit drivers. Maybe they work on your model too because the most P300 models are similar:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Notebook > Satellite > Satellite P Series > Satellite P300 > Windows 7 32bit

Similar Messages

Cannot find the installed driver for Canon Pixma ip6600D

Hello,
I'm pretty new with Mac and OS X and got one problem to use a previous installed driver.
First, please excuse my bad english, I'll do my very best
I've got a Buffalo Linkstation Live 320GB with implemented USB Ports.
You can take the USB Port to use with a printer.
The Linkstation will be a Windows Printserver.
I've connected a Canon Pixma ip6600D at USB Port one and all works fine with Windows XP and Vista via network.
Printing with this Network device uses Windows Network-printing like -> workgroup\buffalo\lp (lan printer)
With Windows this works very well. But now im using OS X Leopard.
So I've downloaded the Canon Mac OS X 10.5 Driver for the ip6600D (can be used for Network printing) and installed it.
OS X wants to reboot, so I think the extension is installed fine.
After this im going to "System adjustments" -> "Printers and Fax" -> "Windows" -> "Workgroup" -> "buffalo" -> "lp"
The Printer is found and here comes my problem: The ip6600D driver does not appear in the drop down list. Only Gutenprint ip6700.
I'm able to print with this driver, but it doesn't work very well and im not able to use CD printing.
So, wehere ist the ip6600D driver? Lost in nowhere?
If I want to search for the driver, nothing could be found.
Searching with Spotlight for ip6600 doesn't find something to use.
Only the installer image of the driver and some web links.
How do I choose the installed ip6600D driver?
Thank you much for any help.

Since there doesn't appear to be an iP6600 driver within the Gutenprint v5.1.3 list, then you could try one of the other iP models, like the iP5200. The key is to find a model that uses the same ink tanks as your iP6600D (and preferably the same engine but that is not as easy to find). If one of the other IP models doesn't help, then you could try the S800. With older versions of Gutenprint I would recommend this model as it would be good enough for text printing, but not that good for images.
If you are unable to find a compatible printer then you may have to look at changing some things. The Canon printer driver has not been designed to be used on the Mac OS X when the printer is being shared by Windows, hence the need to Gutenprint. If this model is not supported in later versions of Gutenprint, then you could look at using PrintFab (which you will have to pay for) or changing the network setup so that the printer is not connected to Windows, such as getting an Airport Express/Extreme. This would allow both OS's to connect to the printer using the Canon driver. Or you could connect the printer to the Mac and get Windows to connect to the Mac share using Bonjour for Windows.

HT4718 I have bought a used mac air 2 which is now running windows .Who ever installed it has given all of the drive capacity over to boot camp.I now want to restore lio but want to know if there isa way of keeping windows as a dual boot .

Hi. i have bought a two month old Mac air book 11.6 with 64 gb ssd .The previous owner installed windows and I want to reinstall Lion.Is there a way to do this and keep windows as a dual boot system.If so what size partition is best for windows..I am new to apples having always had PC,s .When the previos owner istalled windows he made the whole drive something called bootcamp.Help!! Roy

Before you do anything else, I would make a copy of the Windows system on to an external hard disk. Carbon Copy Cloner (CCC) will help you do this.
Bootcamp partition needs to be set up using Bootcamp Assistant, from within Lion. There are sometimes problems using third party disk management apps, and the partition order is important too.
I suspect the previous owner should have re-installed his original OS before giving you the computer. Are you saying that there is no Lion on it at present? If so, you will need to get it, or if it was Snow Leopard, the installation disk, from him. In the latter case, with SL 10.6.8 installed, you can then access MAS to buy Lion.
Once you have Lion installed you can setup Bootcamp and restore your Windows system to it, from the external disk.

Cannot load a FAx driver for a Hp Laserjet 1536dnf MFP on a HP Pavilion Elite e9220y Computer

I cannot find a fax driver for this printer to install on my computer.
I have uninstalled and reinstalled the printer a couple of times It will print and scan but not fax.
I reinstalled fron the orignal disk and off the HP website neither get me fax capablilites.
I have gone to support and cannot find the drive on eith er the printer or computers web page at HP.Com
Please let me know what to do.

Hi @thesaneone4 ,
I see that you are experiencing issues with the fax driver not installing. I would be happy to help you.
Check the connections in the Device Manager for any printer entries, under Universal Serial Bus Controllers look for Fax LEDM or any unknown devices. Right click and try to update the driver. How do I get into Windows Device Manager?
In the Devices and Printers window, what icons do you have for the printer showing?
If you are still having issues, you will need to uninstall the printer software from the CD and unlock the hidden Admin Account when installing the printer software, to make sure there isn't any interference.
Disconnect the USB cable.
Uninstall the software by going to Start, Computer, right click on the CD and open it, then double click on uninstall.
Then download and run the latest software. HP LaserJet Pro M1536dnf Multifunction Printer.
Unlock Hidden Administrator Account and install the printer on this account:
Go to your Start menu and under the 'search programs and files' box type CMD.
CMD will populate as a search option above, just right click on it and 'run as administrator'.
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter.
Next, close CMD and restart your computer.
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.
Under the Administrator account, install the printer software.
Test the printer.
To turn off the Admin account start back at step 1 and type in net user administrator /active:no.
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

How do I reinstall Lion if I get a new hard drive? My mac came with Leopard and I cannot find my upgrade disk for Snow Leopard

My MacBook Pro originally came with Leopard. I have the OS and Applications disks for Leopard but I cannot find my upgrade disk for Snow Leopard. I would like to perform a clean install of Lion on the new hard drive and restore some data from my Time Machine backup. I am not looking to restore the current image to my new hard drive. I have not yet removed the exisiting hard drive nor have I wiped my data.

The only way to do that is to buy a New SL Retail DVD. Or you could buy the Lion Install USB thumb drive from Apple for $69.
You must have SL installed to then install Lion or have a thumb drive with the Lion installer.
You could also create a Lion USB Recovery thumb drive using Lion Disk Assistant. But you need to have Lion already installed and the Lion RecoveryHD Partition on your drive to make the Recovery thumb drive.
Lion Recovery Disk Assistant

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

PageComposer Error - Cannot find the module necessary for printing C5051

Hi
Having some problems trying to setup a Windows 2008 R2 print server with shared Canon iR C5051 printer
I've created the printer, installed the 64 bit driver Canon iR-ADV C5045/5051 PCL6 v 20.90 and works fine for 64 bit Windows 7 clients, installed the 32 bit driver by selecting printer properties, sharing tab, additional drivers and selecting x86 and pointing to the 32 bit PCL driver. Driver installs fine on the print server without any errors.
Goto 32 bit client, add printer, select the shared printer from the printserver, printer installs Ok. When the user however tries to print, get the error:-
Canon PageComposer
Cannot find the module necessary for printing
Re-install the printer driver
I've done this countless times, any idea's on how to fix ?
Thanks

Where is the code you posted? Running in a separate project, I assume? Does that project have a dependency on the project containing the app module specified?
And just to check (although by default, JDev should do this for you)--the app module project has been compiled since adding the configuration, right? You need to check to make sure the config exists not only under Project/src, but under Project/classes.
Edited by: Avrom Roy-Faderman on Oct 6, 2008 2:02 PM
Oh, and BTW--I assume this is not a typical ADF application, right? In a standard ADF application, you would very rarely need to instantiate an application module in code like this; you could just let the data binding facility do it for you. The technique like the one you're using is most appropriate for purely programmatic, no-UI cases. (e.g., once I tried to implement an SMTP server backed by business components. That was an appropriate case for ditching databindings and doing the sort of thing you're doing, because it had no view layer (because it had no UI to render).

Mouse driver for logitech 10.3.9?

I've been searching everywhere online for an optical mouse driver for a logitech mouse (v320) that runs in OSX 10.3.9
I searched the logitech download site, and although the drivers there say they run on 10.3.9, in fact when I try to download it, the program fails to open and load... and in fact the icc310.zip driver is for 10.4.x
I even wrote to logitech and was given the following run-around,
"I understand you would like to know where can you download a software that will work on Mac OS X 10.3.9. Unfortunately, the software for Mac OS X 10.3.9 is no longer available. You can instead do your own research using Google. I apologize for this inconvenience."
After Googling numerous sites, I only find these scam software driver download sites that never connect and ask for a $14.00 signup fee!
http://download.driverguide.com/driver/LS1LaserMouse/Logitech/d1388414.html
So I am stumped as to what to do next... any clues much appreciated.

Actually I lucked out and found a link that still loads a 10.3.9 logitech driver.
I downloaded from here http://logitech-viva.navisite.net/web/ftp/pub/techsupport/mouse/mac/lcc260.zip.
It's amazing that this driver was so hard to find! Or maybe it's all a part of the disposable society that just tosses everything out.
This new driver seems to work with the wireless optical mouse and offers all the side scrolling capacity. It still doesn't seem to work on slightly reflective surfaces all that well... but it's better than nothing.
Logitech support really bites big time. I'll never buy a product from them if I can help it. I just got this one on ebay.
Good luck anyone looking for the same problem!
:0)

Cannot find my hard drive connected to my extreme

Hi - I am using a Windows 7 PC and cannot find the hard drive connected to my airport extreme. I have gone into manaul set up on the extreme and asked it to share the files which it has confirmed, yet when I go into windows explorer I cannot see the drive at all ...... can I please ask for some assitance?

Just want to be sure of three things first if you don't mind:
Does the 802.11n AirPort Extreme Base Station (AEBSn) have a Base Station Name that includes a space? For example: My AirPort Extreme. If it does, rename it so that it does not have any spaces or use the underscore character between words.
Does the shared HDD have a volume name that includes a space? If it does, again, remove them or add underscore characters.
Is the HDD formatted in NTFS? If so, the AEBSn does the best job of sharing HDDs formatted in HFS+, then FAT32. It will NOT work properly with HDDs formatted in NTFS. If the HDD is very high capacity, you may want to borrow a friend's Mac to format it in HFS+ or get a utility that lets your PC format/read/write to HFS+ volumes. Regardless of it being formatted in HFS+, the AEBSn will share it out using both the AFP (for Macs) and SMB (for Windows/Linux) file sharing protocols ... so Windows PC should not have any difficulty accessing it.

HT4623 I have an iPhone 4S that i dont use anymore. It is locked with a password & i can't remember the password. i am wanting to let my child use this phone now but when i connect it to my computer it says that it cannot find the device driver. How can i

I have an iPhone 4S that is locked with a password & cant remember password. when I connect to my computer it says that it cannot find the device driver. How can i fix this?

Hello jlb1977,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Best of luck,
Mario

After installing Lion my printer Epson LBP5050n doesn't work anymore. Cannot find a printer driver

after installing Lion my printer Epson LBP5050n doesn't work anymore. Cannot find a printer driver.

Well then you could download the Epson Printer Driver package for Lion. This will add all the Epson printers in that list.

Cannot find my wlan driver

Hi, I have a Toshiba laptop model number: PSM35E-000MN-EN but cannot find the wlan driver, can anyone help please?

Satellite Pro M30-701 (PSM35E-000MN-EN)
This site is for US computers. The downloads for your European model are here.
-Jerry

I cannot find my original disks for Adobe Web Premium CS4. How do I move the software from my old laptop to a new one?

I purchased a new laptop and am in the process of installing all my software. Due to a recent move, I cannot find my installation disks for Web Premium CS4. Is there a way to move the software from the old laptop to the new one? I am a casual user of the software and do not want to upgrade to a new version.

Download CS4 products
Mylenium

Re: Cannot find a Mouse Driver for my P300-156 which is now running Windows 7

Similar Messages

Maybe you are looking for