Re: CD/DVD drive does not seem to start DVDs in Satellite P750

My CD/DVD drive does not seem to start DVDs, it would turn and turn and the only way I can start a DVD (i.e. a movie) is by using Windows Media Centre, while software to be installed needs to be activated from Windows Explorer.
Anybody?
Please help.
Thanks!

Thanks, Xaver, tried this, still won't autoplay, it will just turn the dvd around for a while and then stop. Though when I open Windows Medi Centre and choos 'play DVD', it does the trick. The only way to install software, though si through Windows Exp[lorer and searching relevant file. Cheers,
Havoc.

Similar Messages

Tecra M5: DVD drive does not read these mini DVDs

I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
Any suggestions?
Why its messedup?

Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
Try the solution from sascha. Maybe youre a lucky man and it works.
If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
Then shuts down again, put the drive into the notebook and boot up the unit.
The notebook should recognize the drive and should indicate the firmware again.
Im not sure if this will help you but its attemptable

My cd/dvd drive does not accept any cds/dvds

I know this has been posted before, but I have tried many methods posted on this site and others, and either I have done them wrong or they haven't worked.
I have a three year old macbook pro running 10.6.8. I also have Windows 7 Ultimate running on Bootcamp, and my disc drive does not work on that OS either.
The weird thing is that two weeks ago, I installed a videogame using a DVD-R and it was working perfectly. I ejected it when I was done. I am 100% certain there is no disc stuck in the drive, and I have looked in Disc Utility to be sure of that.
I tried resetting the SMC by restarting the computer holding down SHIFT+CONTROL+OPTION and the startup button, and that didn't work. I tried restarting holding down the trackpad button, which would eject any stuck disc, among some other methods.
Maybe someone can point me in the direction of re-installing drivers for the disc drive or something? I really hope this is a software issue because I am in another country for the next year and going to an apple store would be out of my budget and very difficult. Any advice is greatly appreciated.
My last resort (I would rather get my computer fixed) is using a Macbook Air superdrive, however it is incompatible with my macbook pro (for some reason they only made it compatible with the Air, which I don't have). I heard there is a risky way of editing some "code" to get it to run with a macbook. But I must stress again, I would much rather fix the problem at hand than jerry-rig an external drive as a solution.
Thanks so much for your help.
-David
edit: as was mentioned in other posts, when I put a disc in the drive, it feels like something in the upper right hand corner is blocking the entry. The computer is completely unresponsive to the disc. Thanks for reading!

it feels like something in the upper right hand corner is blocking the entry.
Appears your optical drive is "broke" = hardware issue.
For DIY instructions check out the following:
iFixit
YouTube’s “How To” tutorials.
AS are not the only places that fixes Macs.
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)

CD/DVD drive does not work - error code 39 on Satellite A300

Good evening.
I've encountered a problem with my Satellite A300.
I can't get the disk drive to function.
Device manager says the driver is current. But also says it is corrupt "code 39".
I have tried downloading new drivers from Toshibas website but they all come up as code 39 unable to install. The first I noticed it was last night when I was installing Norton 360. I had the cd it worked once then nothing.
Has anyone ran across this before?
Any help would be greatly appreciated.

Hi
I had the same issue and I found a solution here in the forum.
The problem is that your Windows registry is muddled up.
You should firstly access the device manager and should remove the CD/DVD drive from the device list.
Secondly you have to start the registry and have to remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Finally reboot the notebook and test the CD/DVD drive again!
Bye

My disk drive does not play any original dvd or cd anymore, but the copies work fine, no matter which format. Do I need a new disk drive?

Hello All,
since last week my disk drive does not play any original DVD or CD anymore, but copied ones, no matter which format work fine. I am a bit confused that the copied ones still work.
Anybody experienced the same? Will I have to get a new disk drive? Unfortunately the warranty expired last month
Looking forward to your answers and thanks,
Yvonne

An external DVD drive from http://www.macsales.com/ may solve your problems.

My external Iomega DVD drive does not read DVDs. Why?

My external Iomega DVD drive does not read DVDs. Why?

what does this question have to do with a mac? post in the Iomega fourms.

Dvd drive does not read dvd but reads cd only.

my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
This question was solved.
View Solution.

It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
608141-001
Above is the part number for the DVD burner drive. I could not find one on eBay. Here is one online:
http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

Satellite L50D-B - faulty DVD drive does not recognize disks

Bought 2 months ago. The drive does not accept CD's, DVD's or anything.
The name of the disk doesn't show up on the drive and if you double click on the DVD drive icon (while a disk is inserted) the tray opens up and says please insert a disk. I've tried many disks so they are not the issue.
So far I've taken it to tech support where I purchased it.
They said to do a reinstall so I did - with the full clean drive. I've tried updating the drivers but the computer insists that they are the latest. If I search for my model number on the Toshiba driver support site it gets rejected and I have no access to drivers (from Toshiba).
I checked out a few other forums and tried the regedit fix but that also did nothing. If no solution is found (and I've already wasted hours of my life on it) then this notebook is going to back for a refund and I'll get one that is going to perform the simple task of playing a DVD.
Windows 8.1
PSKUQA - 01300S

Hi
Sorry to hear that you have such stupid problem with your machine. On this virtual way it is not easy to say what is wrong there.
In my opinion you should not waste your time checking and searching for some drivers that probably will not help at all.
Reinstall original operating system that you have got with your machine and test functionality with factory settings. If the result is the same contact your local dealer or Toshiba service provider directly and ask for help. They can check ODD and exchange it if necessary.

CD/DVD drive does not work after Win 8 intsallation

from a month i've updated my windows into windows 8, everything is working great but the DVD-RW .
When i put empty cd and try to open it, it gives me error while opening saying:
"windows was unable to complete the format"
So is that a software or a hardware problem?!
waiting for the help !

Does this mean that your CD/DVD drive does not work anymore and is not recognized by system?
If yes, then I would recommend checking this Toshiba document which I found on the knowledge base portal webpage:
+Why does my CD/DVD Drive not work after upgrading to Windows 8?+
http://aps2.toshiba-tro.de/kb0/FAQ2B03F10002R01.htm
You will need to uninstall the Toshiba programs:
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator

Satellite L500-126 - CD/DVD drive does not open very smoothly

Hi,
I just got my second Satelite L500-126.
I exchanged my first one for a new one because the ESC key got stuck sometimes and made a squeaking sound.
Now with my new one, I noticed that my dvd drive does not open very smoothly and 2 little silver metal bars come out with the drive when I open it.
Is this normal?
Also, when I close the dvd drive i hear a little "ping!" sound.
Like a spring or something. Is this also normal?
Thanks in advance.

Hi
Im not quite sure what you mean by 2 little silver metal bars but my notebooks drive contains two metals (runners, trackage).
This is normal and these parts are important to ensure that the drive could eject properly and could stay in right position.
You will always hear an short click opening and closing the drive.
So I assume this is ok.

DVD drive does not close: Stays open whether there is a cd in the tray or not

I have a toshiba laptop:
Specifications:
Satellite Series: L305DS5881
Model: PSLC8U-00D010
Optical Disk Drive: TSSTCorp CDDVDW TS-L633P
I have had the laptop for a little over a year now and just recently the DVD drive will not close even when I have a cd in the tray. I have not reinstalled the operating system therefore have not ruled out that it is not an OS issue. Is there anything I can do to fix this issue?

Hi
In my opinion its a mechanical CD/DVD drive problem and you should contact the ASP in your country for a check.
I mean your warranty must be valid because this notebook does not seem to be old.
So ask the ASP and maybe the CD/DVD drive must be replaced.
Bye

Satellite L300D-13S - CD/DVD drive does not close properly

Hi,
I have the L300D-13S about one week.
Today and for a short while last Sunday the DVD drawer will not stay closed.
I have restarted a few times and tried putting discs in but it still ejects and doesn't read the discs.
I installed Norton 360 Version 2.0 the day I got it, I really don't know a lot about computers and I am hoping it's simple enough.
I have checked the control panel and checked all the settings and they all seem fine.
I'd appreciate any help.
Thanks.

Hi
In my opinion its a mechanical CD/DVD drive problem and you should contact the ASP in your country for a check.
I mean your warranty must be valid because this notebook does not seem to be old.
So ask the ASP and maybe the CD/DVD drive must be replaced.
Bye

CD/DVD drive does not appear in Windows 8

My CD/DVD drive no longer appears in Windows Explorer in Windows 8.1 on my HP Pavillion Slimline 400-034 Desktop PC. The drive spins upon boot. I've tried the Microsoft Window 8 troubleshooting with no luck. I'd like to try the HP troubleshooting which requires BIOS access upon boot, but pressing F10 during boot does not get me to the BIOS but instead loads Windows normally. Any suggestions to at least help me get to the BIOS?
This question was solved.
View Solution.

Hello @weatherdoc,
I understand that your HP Pavillion Slimline 400-034 Desktop PC does not detect your Optical Drive and when you tried the HP Support document: CD/DVD Drive Is Not Detected (Windows 8) and when you get to the step that requires you to enter the BIO tapping F10 when the computer first begins to start up will not open the BIOS as it should. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My cd/dvd drive does not recognize/load cds

iMac 10.6.8 snow leopard with iTunes 11.0, purchased in 2008.
The cd will be accepted into the drive which will begin to turn/mount the disk followed by a few clicks after which the drive stops, tries again, tries a 3rd time and then ejects the cd. Dvds do load but I have been experiencing "skipping over damaged area" msgs when there is no damage. Resetting the SMC alleviates that problem for dvds but not the cd loading problem. Cds that have been accepted in the past do no load, even brand new cds.
I do play dvds and cds frequently but before I conclude that my drive is failing due to wear and tear, I wanted to know if there's a way to clean the drive, if that's the problem. The drive does not accept a dvd/cd drive cleaning disk.
Any suggestions for further at-home diagnosis/refurbishing before I contact my local authorized repair person or buy a Superdrive to substitute for the malfunctioning drive?

None of the information you have provided answered my question regarding a way to clean/refurbish a drive which will not accept a dvd/cd cleaning disk.
You finally advised me to do what I had already done prior to posting.
Perhaps you have a reading comprehension problem. Although the internal drives are generically referred to as superdrives, I only employed that term in my initial post when referring to purchasing an external drive to potentially be shared with a laptop. So, the confusion is yours.
The link below gives simple yet comprehensive coverage of when, why and how to reset SCM/PRAM, which does not include my CD mounting issue, although it resolved the "skipping over damaged areas" problem I had prior to my original post regarding alternative ways to clean the internal drive.
http://thenextweb.com/lifehacks/2010/12/04/how-when-why-to-reset-the-pram-smc-on -your-mac/
The link below contains a discussion of failing dvd/cd drives for iMacs of the same vintage as mine with the similar mounting issues. I had no success mounting a CD via a virtual XP environment, so it's more likely a hardware issue.
http://forums.macrumors.com/archive/index.php/t-1337712.html
Here's a link discussing pros and cons for buying a USB Superdrive (external Superdrive as I mentioned).
http://www.macworld.co.uk/news/mac/it-worth-buying-apple-usb-superdrive-3491736/

CD/DVD-drive does not read/write properly

I can not write any dvds or cds because every time a message pops up with an error.
I tried different burning programs with different cd manufacturers and it still does not seem to be a problem on other computers having the same program and using same cds or dvds.
Another thing is that it can not read dvds all the time; same dvd can work once but not again and whenever i try to open a normal cd-r it says blank disc even when they work perfectly on other computers?
can anyone plz help

hey ..ok im on a toshiba laptop SA50-543 usind windows XP home edition..the dvd/cd thing is built in and is a DVD rewritabl CD rewritable multiple recorder.
as for the programs i used for burning..i tried nero,sonic record now and the one im on now is roxio easy media creator
as for the error msg it says:
there was a problem writing to the disc.you can try again by clicking the retry button.you will need another blank disc ready.
further info:
Recording error
Recording errors can occur when a disc contains dirt, fingerprints, or scratches.
If you are getting recording errors:
Try using a new disc.
Try using a different manufacturer??s disc.
Ensure the disc is clean before recording:
Remove all fingerprints, dirt, and dust from the shiny side of your disc using a nonabrasive cloth with a mild, nonabrasive soap solution.
Wipe the disc from the center to the edge.
Dry the disc completely.
tried doing all of that and still not recording..and anyway if it was aproblem with the cds why would they work fine on other laptops?
i dont know which other info you need so let me know if theres anything else
Oh yeah, theres an advanced explanation for the recording error but its all in numbers do you need to know that?
thx

Re: CD/DVD drive does not seem to start DVDs in Satellite P750

Similar Messages

Maybe you are looking for