Re: Change to industry sector

Dear All,
Because of mistake we have created the material with different industry sector, would you pls help to change below wrong setting for PN97724085 of Industry sector from Chemical industry to Mechanical Engineering?
Thanks & Regards
Siva

Hi,
Its not possible to change the Industry Sector.
Check on it for material deletion.
Re: Material marked for deletion
pherasath

Similar Messages

  • Change   the  Industry Sector

    Hello,everybody!
            After the material master data have been created,can we make a change of  the  Industry Sector ?  If do, how to realize it?
           Thanks in advance !

    HI,Stephen  and Yogesh:
    Thanks for your replies!
    The reason I want to change the industry sector is that:
    We filled the industry sectors of all materials with different labels (e.g., A and B).
    Now we want unify them to the same label.
    It seems this change is impossible according to your information.
    Thanks!

  • How to change the Industry sector of a material

    Hi,
    We made a Material Number with wrong Industry sector. How can i change it to right Industry sector.
    Industry sector should be Electrical inplace of Chemical Industry.
    Plz guide..

    Please check these links out for details:
    Re: change industry sector
    Re: change   the  Industry Sector
    Change industry sector
    Edited by: Afshad Irani on Apr 24, 2010 12:50 PM

  • Change Industry Sector

    Hi
    can any one tell me
    how to cnange industry Sector for one Material.
    From Chemical to Mechanical Industry.
    it is very urgent
    regards
    Manju or

    Hi,
    you cannot change the industry sector of material once created. i tried even to change by using t-code MASS nut there i didnt find field MBRSH-industry sector which is there in the table MARA.
    i think you have to create material again with your industry sector.
    if other alternative is thr let me knw.(gurus).
    Regards,
    Archit

  • How to modify  industry sector of material master data

    dear all:
    i have already created a material master data using a wrong industry sector through tcode MM01.
    and i have created BOM&ROUTTING for this material.
    now ,i want to modify the  industry sector of  this  material.
    what should i do for this case?
    thank you!
    best regards!

    Hi,
    Industry sector is at client level & once you create the material you can't change the industry sector.
    However, if you have debug rights then you can change it directly in the table MARA with field MBRSH.
    Hope your query get resolved.
    Thanx

  • MM01-Industry sector

    Hi all,
    While creating material code using MM01 i have wrongly put industry sector as OILl.Now i need to change the industry sector.  specify which Trasancation Code to be used.
    or specify some procedure.

    Hi
    Industry Sectors
    Use
    When you create a material master record, you are required to classify the material according to
    industry sector and material type.
    Like material types, industry sectors have control functions in the R/3 System. For example, it is
    a factor determining the screen sequence and field selection [Page 97] in a material master
    record. Once you have assigned an industry sector to a material, you cannot change the industry
    sector again afterwards.CChheemmiiccaall iinndduussttrryy
    MMeecchhaanniiccaall eennggiinneeeerriinngg
    Features
    The standard R/3 System contains the following industry sectors. The ID used to identify the
    industry sector internally appears in parentheses.
      Plant engineering and construction (A)
      Chemical industry (C)
      Mechanical engineering (M)
      Pharmaceuticals (P)
    The other sectors are for retail.
    Activities
    Your system administrator can define other industry sectors in Customizing for the Material
    Master in Define Industry Sectors and Industry-Sector-Specific Field Selection [Ext.].
    This is MM tutorial notes
    Industru sector cannot be changed in std SAP
    Raja

  • How to change material type and industrial sector of the exsisting material

    Hi,
    There is an issue where user wants to change material type and industrial sector of the exsisting material .Is  it posible to do so??
    IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector  can be created.
    Points will be definitely rewarded.
    Thanks
    Rohit

    Hi Rohit,
    You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
    Remember the new material type should have same attributes same as old material type.
    OLD Material New Material
    1) Standard Price 1) Standard Price
    2) Manufacture part 2) Manufacture part
    profile actvated profile actvated
    3) Quantity & Value 3) Quantity & Value
    Updation in all areas Updation in all areas
    4) should have same GL 4) Should have same GL acs
    acs
    It is not possible to change Industry sector once created.
    If you want to delete the Material, you can flag it in MM06 trxn code.
    Reg,
    Ashok
    Dont forget to Assign points if useful.

  • Industry sector field for display only.

    Dear All,
    Does anybody know the setting to make Industry sector for display only, so that the enduser cannot change industry sector while creating material.
    I know to hide industry sector from DEFAULTS menu, but i need to freeze that field for display only.
    Regards
    Rang

    Hello Ranganath,
    You can use transaction exit. for more information check this thread.
    Industry sector (MBRSH) field in display mode.
    Hope this helps.
    Regards
    Arif Mansuri

  • Ignificance of the Industry Sector selection in the Material Master

    hi all,
    We need information on the significance of the Industry Sector selection in the Material Master field. I understand that it can influence field selection and the screen sequence of the material master record.  We are particularly interested to know the influence of the industry sector u201CPharmaceutical Industryu201D .
    Any inputs would be greatly appreciated.

    Hi
    Please check follwoing links
    [MM01- Industry  Sector;
    [http://help.sap.com/saphelp_46c/helpdata/en/ff/515b3149d811d182b80000e829fbfe/content.htm]
    1. Define Industry Sectors and Industry-Sector-Specific Field Selection (transaction OMS3) -> assign a field reference to field selection
    2. Maintain Field Selection for Data Screens (transaction OMS9) -> define a specific field selection for a field selection group (for example, depending on industry sector (the field reference appears on the lower table control).
    Like the material type, the industry sector also has a control function. When you create a material master record, the industry sector determines:
    Which screens appear and in which order
    Which industry-specific fields appear on each screen
    The industry sector you assign to a material cannot subsequently be changed. In Customizing, you can define new industry sectors and maintain the field reference for field selection control according to your enterprise-specific requirements.
    Most data in the material master record can be maintained directly by the user. But some information is automatically updated by the system. When you enter goods movements, for example, the system updates the stock and consumption data. Statistical information, such as the date of original creation and that of the last change, can be invoked with , with the quick-info text Information on material.
    Some data in the material master is used for information purposes only, for example, description, size, and dimensions. Other material data has a controlling function in an application. For example, the MRP type controls the MRP procedure and the price control indicator determines which material valuation procedure is used
    Regards
    Kailas ugale

  • Industry Sector and Material Type list of values in cFolders

    Hi,
      How to transfer the List of Values for Industry Sector & Material Type from R/3 to cFolders system?
    We have R/3 Production system running for the past 3 years. We are implementing cFolders now. While Material creation in cFolders, the List of Values listed for above mentioned fields are not as per R/3 values. Hence we need to change the same LOV in cFolders as per R/3. How to do it?
    Prasanna
    9036129381.

    Hi,
    The parameters material type and industry sector are used
    to classify a material. They define its possible uses.
    For example if you selct indutsry type as retail or mechanical it will classssify the material accordingly. again material type is semifinished then this you can also use as a raw material. In mm02 or MM03 u cant see it.
    If you want to see these you can go to SE16 and put table name MARA and can see it.
    Hope this will help.
    Reward point if helpful.
    Thanks,
    Raja

  • Restiction of material types based on the industry sector?

    I have developed  specific industry sector for my client and also developed specific material types (Z*) for them.         
    But then i cannot prevent my user from creating the material master with the incorrect industry sector and also they are able to create material types choosing the incorrect material type?
    Can somebody please advise how to restric this.
    Thanks
    Regards

    In the MM01 trxn ..
    Enter Industry sector & Material Type.
    then Click > Defaults > Industry Sector > Put tick to Industry sector ..
    So, that the Z* Industry sector will become Default..
    As user will not see Industry sector , there is no Question of changing..
    Pls do it for All Users..

  • What is the significance of industry sector ?

    Hello Friends ,
    Wat is the significance of industry sector . I have always been using Mechanical Engg . Will  using something else change something ??
    Regards
    Anis

    If you mean "Industry" field in the vendor/customer master record, the field is used only for information purposes.
    Regards,
    Svetlin

  • How to transport industry sector

    Hi There,
    I configured industry sector to "Standard (core)" in transaction SBIW, but I can't figure out how to transport to QA and production?
    I even try to transport entry in SE16 table TMCLBW, but all transport option are grey out.
    Please help?
    Thanks
    Joey

    We were unable to make a transportable change, and wre forced to make the change locally in all our systems. -Doug

  • Determine Industry Sector / Transaction Key Maintainance

    Hello Gurus,
    I have been doing these 2 settings for Purchasing and Inventory Controlling. But never understood the real impact and reason. Could anyone throw some light on the same in detail.
    thanks in advance.

    Hi dear,
    if you check all the std update rules for the involved flows....you will find that every row (more or less) takes into account (in if-clauses and so  on...) these objects !
    A lot of LC datasources have only generic key figures (transfer quantities and transfer values) that have a significance only if combined with the process (transaction)keys!
    The industry sector change is a prerequisite to have filled these fields !
    Hope it helps!
    BYe,
    ROberto

  • Hide Industry Sector

    Hi,
    There is a need to hide the not required industry sectors in MM01 drop down
    Is there any way we can hide that.
    Thanks
    Diwakar

    Hii,
    You can set the default industry sector in any of the material master screen i.e creation and change mode (mm02).
    Go to T-Code: MM02
    Go to menu Defaults
    Select the Industry Sector
    It will ask for the default industry sector assign
    Check Box the Hide Industry sector on initial screen
    When ever u create the material code the default Industry sector will be the assigned one in the default values.
    Regards,
    Kumar

Maybe you are looking for