Re: Choosing hard drive for iMovie when processing

I've created my iMovie on the secondary hard-drive on a multi-drive Power PC G4. The secondary hard-drive has 32 GB of available memory, but the movie seems to want to process using the start up hard-drive which doesn't have nearly as much available memory. How do I get the movie to process using the secondary hard-drive?

Cool! That was quick! Thanks! So, I just make a movie > save as > select my external hard drive and that's it?
Will the extra stuff (garbage) remain on my boot drive or will it all get saved on the external?
I am hoping for the latter. I want to keep my iMac Pristine!

Similar Messages

Does the cache matter when choosing hard drive for mac pro?

Hi,
I have been looking at all the specs to see about adding another hard drive to my mac pro. It is the 1st generation 2006 duel. I am getting a bit confused about the specs required! I don't understand cache? I think that mine is 8 cache, but a lot of the drives I am looking at are 16 or more. Is this important, have I got to stick to 8? Also does it matter about which Sata? i.e. 1, 11 or 111? and what does 'low profile' mean? Fitting it seems really easy, but buying the wrong drive seems easy as well!
Thanks for any help,
Adrian.

Desktop drives are nominal 3.5" form factors, about one inch tall. They use a 12 Volt motor to spin the heavy platters around fairly fast.
Notebook rotating drives are mostly 2.5" form factor, now mostly around 9.5mm tall, possibly less. They have only 5 Volts available to spin the motor.
SATA 1, 2, 3 -- 1.5, 3.0 and 6.0 is all specsmanship -- rotating drives cannot source data off the spinning platters faster than a burst of about 150 Mbytes/sec (1.2 Mbits/sec). So that part does not matter except that the 1.5 drives will be older models. Do note pay extra for better SATA speeds.
Rotation speed is very important, because that determines how fast the bits can fly past the read head. 5400 RPM is slower than 7200 RPM. A few 10,000 RPM drives are available, but they are too pricey for most users. I use 10,000 RPM drives in my Server. For Desktop computers, DO pay extra for 7200 over 5400. For notebook computers, a few 7200 RPM drives are available, but they sometimes run HOT.
Green drives, on the other hand, take great liberties with spin rates and sleeping, and are not suitable for production (great for Backups, but then they are not candidates for spares for your main drives). For these reasons, I do not own any Green Drives.
Large-enough cache size means the drive can read an entire track in one revolution, so that if you next ask for blocks near the original block you will not wait the average 4.166 milliseconds for the platter to spin halfway around to pick up new data (it is waiting, pre-fetched in the cache). So do not pay extra above about 8Mbytes, but use larger cache size as a tie breaker between equivalent models.

Using an External Hard Drive for iMovie Editing and Burning to DVD

Between iPhoto, iTunes and other applications I am rapidly running out of hard drive space on my 2003 iMac. Because of this, I recently purchased a Lacie 250 GB Firewire external hard drive and was hoping to use it for iMovie editing and buring of DVDs, because of the large amount of disk drive space video eats up. Is it it possible to "load" iMovie and iDVD to the external drive and edit/burn videos on that drive? If not, is there some other way to use that external drive in this process? Thanks in advance for any assistance that can be provided.

Scooper
see my reply to Trollus, just posted:
That's how I do all my stuff now - via external lacie 'brick' drive. The only trick is when you begin your iMovie project, hit save immediately after creating the new project, and save the project file in an appropriately named folder on the external hard drive (don't call it 'Movies' as it'll be confused with your Powerbook's movies folder). Then as you import all your clips from your movie camera, they will be written to the external drive, rather than you G4's drive. Very handy.
I do all my iMovie and iDVD stuff via the external Lacie drive - the FireWire 400 interface is quick enough (ie never had skipped clips, etc). I also save all iDVD finished projects as disc images on the external drive and burn DVDs from those at slow speed via Disc Utility. No coasters...:-)
Greetings from Canberra
Dave
iBook G4 Mac OS X (10.4.8)

? Re: External Hard Drive for iMovie Usage & Storage

Ummm .... I am formatting an OWC 400GB Mercury Elite as Mac OS Extended (not journaled) as we speak. I got it just for movies.
Not sure if I need to actually put the Operating System on this drive and boot from it ~ or if I can just use it for working on the projects?????
How do you experienced people manage this?
... I'm still very much in the learning stages.

Cool! That was quick! Thanks! So, I just make a movie > save as > select my external hard drive and that's it?
Will the extra stuff (garbage) remain on my boot drive or will it all get saved on the external?
I am hoping for the latter. I want to keep my iMac Pristine!

GoFlex Thunderbolt or upgrade internal hard drive for imovie editing?

Hi All,
I use AVCHD (1080p60) video format but as many of you know, editing is not very user friendly... well until the new iMovie update. Here is my dilemma: my 500gb internal drive is full (video clips mostly). So, my options are to move the clip library to an external hard drive using USB 2.0 and thunderbolt in order to free up space or install a larger capacity hard drive. I really don't have any desire to invest into Thunderbolt RAID; my NAS needs a second hard drive and Im really having a hard time explaining to my wife why I need the second drive on the top of the black box that she still doesn't understand why it's even there. So justifying the raid isn't an option here.
The question is how would it affect my systems editing performance if I get an external Thunderbolt drive such as Seagate GoFlex vs increasing the internal drive to 1TB and perform all the editing on the internal drive? Optical drive swap is an option as well but I'm concerned with how Mavericks would handle the second hard drive and how it would affect my battery performance.
Thanks!

vsadnik wrote:
Looks like iMovie 10 won't allow to move the library to an external drive. I hope it will be fixed with an update.
Yes it will with no problem. Look closely in the helpfunction " working with librabries" or here:
http://support.apple.com/kb/PH14745
HtH
Ben

Choosing an external hard drive for back up

This is more for general advice than a specific question. Right now I have my hard drive partitioned and use the second as a backup with Time Machine. It will work for most situations but not all, such as a home fire or break-in (all my photos and music, lost forever!).
What I want to do is buy an external hard drive for backup and keep it at work. I would then bring it home every few weeks to update, but otherwise not store it in the same place as my computer. That way I would never lose more than a few weeks worth of stuff. So, a few questions, the nature of which will let you know how much of a novice I am at this.
1) Right now, Time Machine automatically updates once per hour. When I am using the external drive will I be able to set Time Machine up to only update my back up files when I connect the external drive. Is this difficult.
2) Any suggestions on what kind of external hard drive I should buy, or what features I should look for would be appreciated. I live in a remote area, so something I can get from futureshop.ca would be preferable.
3) My hard drive is about 280 GB. What size should I buy.
Advice on any of the above would be appreciated. Also feel free to toss in anything else you think I should know or consider.
Rgds
PF

Snowfog wrote:
This is more for general advice than a specific question. Right now I have my hard drive partitioned and use the second as a backup with Time Machine. It will work for most situations but not all, such as a home fire or break-in (all my photos and music, lost forever!).
What I want to do is buy an external hard drive for backup and keep it at work. I would then bring it home every few weeks to update, but otherwise not store it in the same place as my computer. That way I would never lose more than a few weeks worth of stuff. So, a few questions, the nature of which will let you know how much of a novice I am at this.
1) Right now, Time Machine automatically updates once per hour. When I am using the external drive will I be able to set Time Machine up to only update my back up files when I connect the external drive.
This is what I am currently doing among 3 different backup disks (1 Time Capsule, a WD500GB, and a Lacie 160GB). You won't have to "set" anything up other than attach the new drive and select it in the TM prefs. Then when your done, reselect your normal TM disk.
2) Any suggestions on what kind of external hard drive I should buy, or what features I should look for would be appreciated. I live in a remote area, so something I can get from futureshop.ca would be preferable.
Most any drive will do, as you partition it correctly to begin with.
*_How Should a Time Machine Hard Disk be Prepared?_*
For Time Machine to work properly, the hard disk must be formatted “Mac OS Extended (Journaled)” and its’ Partition Scheme should be either GUID or Apple Partition Map.
Time Machine is incompatible with disks partitioned as Master Boot Record (MBR). Unfortunately, this describes nearly every hard drive you can buy because MBR is a Windows partition scheme. (Naturally, this DOES NOT apply to Apples’ Time Capsule.)
For some, Time Machine begins to perform as expected with a new external hard disk. But then the initial full backup or subsequent incremental backups fail. The user only later discovers the hard disk was still partitioned as Master Boot Record (MBR).
One article on Time Machine made this observation: “Virtually everybody will have to open Disk Utility and repartition the disk as APM or GUID. It doesn't really matter which one because the Time Machine disk will not be bootable anyway. APM allows a disk to boot a PowerPC, GUID allows the disk to boot an Intel processor but both are easily digestible by Time Machine on either kind of processor.” [http://www.girr.org/mac_stuff/backups.html]
It’s been recommended by many here that your reserve +at least+ double the size of your primary hard disk, that way Time Machine backups have room to grow as the size of your data grows. Additionally, the more space you give Time Machine the more history it can preserve. The less space you reserve for Time Machine the sooner older backups & deleted items will disappear.
One poster recommended this regarding multiple partitions: “If you do create multiple partitions (half and half would be a good place to start), make sure you use the first partition for Time Machine, and the second for your own stuff (the first one will be on top in the graphical representation shown in Disk Utility; you'll understand when you see the partition tab). This way, you can expand the Time Machine volume at any later time by deleting the second partition. Disk Utility allows this dynamic re-sizing of volumes, but volumes can only be expanded toward the end of the drive, when a volume that comes after is deleted to create the room.” [http://discussions.apple.com/thread.jspa?threadID=1712437&tstart=0]
Procedure
Connect the hard disk you wish to use for Time Machine backups.
Launch Disk Utility.
It will appear twice in the pane on the left. (Make sure you recognize that it is different from the 2 icons that represent your Macs' internal drive.) The upper entry represent the device as a whole, including the controller inside. The lower entry represents the hard disk contained within the device.
Click on the upper icon of the external hard disk.
Select the "Partition" tab.
For "Volume Scheme" choose "1 partition". (Choose 2 partitions if you intend on storing other data on the disk besides your Time Machine backups. Ensure that the two partitions have different names.)
Name the disk.
Format should be "Mac OS Extended (Journaled)".
Click "Options".
Select either GUID or Apple Partition Map. (See above for significance)
Click "OK".
Click "Apply". Then click “Partition”.
Once the external hard disk is repartitioned, select it again in Time Machine preferences and use it for your backups. If you chose to create 2 partitions, then select the first partition for Time Machine backups, and the second for additional files/folders.
3) My hard drive is about 280 GB. What size should I buy.
Any TM backup drive should be +at least+ twice as large as your Macs internal hard disk.
Let us know if this resolves your issue.
Cheers!

The hard drive for my MacBook Pro recently crashed. I purchased and installed a new hard drive (i.e. Samsung SSD). However, when I try to re-install the Mac's operating system, I come to the part of the installation instructions where you asked to selec

The hard drive for my MacBook Pro recently crashed. I purchased and installed a new hard drive (i.e. a Samsung SSD). When I try to re-install the Mac operating system, I come to the part of the installation instructions where you are asked to choose a disk to install the software. However, there is no disk listed in the selection screen. Why is there no disk in the selection screen?

Welcome to Apple Support Communities
You haven't formatted the SSD, so you can't install Mac OS X.
First, close the OS X installer and open Disk Utility. Then, choose the SSD at the top of the sidebar, go to Erase tab, choose "Mac OS Extended (Journaled)" as "Format", and press Erase. Finally, close Disk Utility and reinstall OS X. See > http://pondini.org/OSX/DU1.html

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

I have a MacPro5,1, Quad-Core Intel Xeon, 2 processors running at 2.4 GHz. I am running OSX 10.6.8. I installed Yosemite on another drive. When I choose Restart in Yosemite it shows my 10.6.8 hard drive. But when I click Restart in 10.6.8 it does NOT

I have a MacPro5,1, Quad-Core Intel Xeon, 2 processors running at 2.4 GHz. I am running OSX 10.6.8. I installed Yosemite on another drive. When I choose Restart in Yosemite it shows my 10.6.8 hard drive. But when I click Restart in 10.6.8 it does NOT show my Yosemite drive. I used to know how to get the startup screen that showed multiple drives but I've forgotten it. How do I do that?

Press Option at startup.
(124807)

Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port. Recently installed a portable hard drive for back up purposes. Related?

Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port. Recently installed a portable hard drive for back up purposes. Related?

Does your printer have a slot for an SD card? Is there are card in the slot? If so, the computer is trying to mount that card as an external device. It might be corrupted so that it can't be read.

CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

Hello,
i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

Hi there ulairi9!
I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
http://support.apple.com/kb/TS3271
Thanks for using the Apple Support Communities!
Cheers,
Braden

Best method for importing mini DV tape movies directly to an external seagate hard drive for later import to iMovies ??

Best method for importing mini DV tape movies directly to an Seagate external hard drive,for later import to imovie event???

The simplest and cheapest option is LifeFlix. They have more info at www.lifeflix.com or on the Mac app store at https://itunes.apple.com/us/app/lifeflix/id630212114?ls=1&mt=12

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

Yes. Unfortunately, I don't know the specifics because I don't use iPhoto anymore and I completely copied over 15 years of MP3 files recently when I installed 10.7. Needless to say, I have not opened iTunes since and probably never will again - not because of iTunes but because of my stupidity. I did have some of the files backed up but I hadn't backed up in a while.......anyway....
When I imported my CD's, I had them go directly to my external firewire. I can't remember exactly how to set it, but in the preference section of iTunes you can specify an import destination to any drive that's available to your machine. I did this with iPhoto as well way back at one point when I was using Tiger, but I don't remember the specifics on that either. I can't imagine they would have discontinued support for that feature since then.
Sorry I couldn't help more.

Re: Choosing hard drive for iMovie when processing

Similar Messages

Maybe you are looking for