Re-coloring dark and light areas to match

Hi, I'm getting hit with Photoshop stuff this week! Not my strong point. :-( I am trying to recolor this ribbon. I know how to change the blue to red (using a brush in Color mode), but the problem is I want to make the whole ribbon solid red (the same look as the right-most stripe). How can I go about this? Cloning the red part over the rest? Anything any easier? I tried painting with Multiply in the middle stripe and Color in the lefthand stripe, but that still gives me obvious distinctions where the stripes were. Any suggestions?
Thanks, Phyllis

(I meant Luminosity, not Multiply.)

Similar Messages

Viewer highlights Dark and light spots...

I probably hit a combination of keys that activates my viewer to highlight the dark and light spots with a bright blue, magenta, green... and other colors. I remember FCP 7 to do this if zebra stripes were activated. I have look everywere to turn this off but I can't find it. Please help.

I did change the calibration in syspref/display/calibration and yes, this was causing the effect in Final Cut Pro X althouhg did not affect any other appp sucha s photoshop, quicktime, preview, etc. Is this a bug in FCPX?
Thanks for your response.

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

Iphone 6 screen flickering dark and light

my iPhone 6 screen keeps flickering dark and light, whats happening and how can i fix it?

The symptoms you describe could be those of a battery being completely drained. When this happens the device will shut down and not respond even after attempting to charge. The usual cure is to plug the device into the wall charger and let it charge for at least 30 minutes. Then reset the device. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot. If the device restarts let it continue to charge until the battery is 100%. If the device does not restart make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Process order dates in ECC and APO are not matching.

Hi
We are sending Planning order to ECC there we convert to process order.I see there is diffrent start and end dates in APO and ECC.
But I see in CCR report I get error message material ABC has a different receipt date in SAP APO and SAP R/3.
I am not able to reconcile there.Message says
you should deactivate the receipt date comparison. Alternatively, you can activate the order end date comparison if the primary product is assigned to the final operation.
I am not sure how to do this.Can anyone guide how to do the same.Also what is the root cause of issue.Why I am getting this message.
Regards
R

In APO, if the receipt date of the primary product deviates from the end date of the last activity of the order (for example, due to an offset or scheduling at the end of a fixed block), the receipt date always identifies this as inconsistent.
You cannot rectify inconsistencies of this type by using the reconcile provided in the CIF compare/reconcile function.
In this case, you should deactivate the receipt date comparison. Alternatively, you can activate the order end date comparison if the primary product is assigned to the final operation.
You can use the business add-in /SAPAPO/CIF_DELTA3 Enhancements Comparison Report to deactivate individual comparisons.
Check for the Note 645597 in which you can find example coding with which you can activate the order end date comparison.
Also check notes 815509
Thanks,
nandha

MD04 and CO09 are not matching after EHP5 upgrade

Hi all,
we have changed to ECC6 EHP5 and now we have the following problem:
When we are using transaction CO09 we are not able to see old purchase orders.
When we are going into the purchase order and change the quantity, they will appear in the CO09.
In MD04 everything looks like befor the EHP upgrade.
Any ideas?
Kind Regards
Dirk
Edited by: Dirk Drössel on Jul 20, 2011 12:35 PM

Thanks a lot, that was the solution.
Regards
Dirk

I just replaced the ink in my printer. Now it prints some lines dark and other are very faint.

how do I fix my print problems on my Hp F4400 printer?

Hi @57srv,
I would be happy to help you with your F4400 series printer. I understand that since changing your cartridge the print quality has been poor. Please use the following document to troubleshoot the issue, and call us if the issue persists; HP Officejet 4400 (K410), Deskjet Ink Advantage (K209), and Deskjet F4400 and F4500 All-in-One Print....
Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. We will, at our option, either replace products under warranty that prove to be defective or refund the purchase price.
We could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
The number to call is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
Please use the thumbs up below if you happy with my efforts to help. Best of luck!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Colors in Photoshop (and Illustrator) are really off.

the biggest thing i noticed was that my greys were more brown than anything. I've included a sample pic that might show better the things i'm referring to.
so in the color selector dialog, the whole left side (white to black) is all tinted brown, like a sepia. this occurs in both Photoshop CC 64 and Illustrator CC. other applications like Paint.net, regular Paint, and GIMP show the normal white to black gradation with all the normal greys, so i know the monitor is displaying fine. i assume it's a color profile that i have to set or adjust somewhere, but the weird thing is that in Illustrator's color selection dialog, the square preview swatch of the color seems accurate and does NOT match what i see in the actual color "wheel". In Photoshop, the square swatch DOES match the color wheel, and both are incorrect. and weird, uploading the image to the forum here, the colors are equally screwed up (EDIT: once i hit "post" the posted images shows the blue color like it should). i'm going to try hosting this somewhere else and linking to it.
maybe someone could just check out the color 4252e8 and see if it's a periwinkle-type blue or a plumb-y purple.

Made what adjustment exactly?
Your problem is a bad display profile. The other applications aren't color managed and don't use the profile at all, so they're unaffected.
The way to fix that is to use a calibrator to make a new profile, but since you don't have one use sRGB. Set the profile in Control Panel > Color Management > Devices:
Relaunch PS/Ai so that they can pick up the correct profile at startup.

Not only a yellow screen, but its dark and grainy

There are so many fora discussing the yellow tinted screen. I got my really yellowish screen replaced and now I have a nice iPhone 3G with a yellowish tint BUT with white whites. The icons look great now! This is good and I gather that this is how it was meant to be. However, now that the graphics looks great in general - the multimedia graphics are still much to red/yellow and dark - that is album covers, films, photos and pictures taken with the camera. AND, since they are very redish-yellow the low keys in dark and neutral areas become much more grainy. I cant even use my photos like a portfolio anymore, compared to the old iPhone. The camera performance have always been quite good for a 2 mp camera, but now it takes quite bad pictures due to this fancy and deliberately made tint with grains as a result.

Thanks for reply, but no I have firmware 5A347. I have seen the screens of at least ten various iPhone 3G´s with that firmware and they look almost the same as mine - as described above. I think this is how Apple wanted them, but not to everyones pleasure. And as such its NOT the same screen as the first gen. iPhone as claimed during Steve Jobs presentation. At least mine is not, among many many others...

My C5500 keeps on saying to turn off and lights flash all the time

Hi, My C5500 printer keeps saying to turn off power and lights are blinking? Should I uninstall and re install? What happens to info already on the computer?
Thanks,
T

Hi Tinkerbelll,
I understand that you are having an issue with the printer. I will try my best to help you resolve this issue. In this document for 'Turn Power Off then On' Message Displays on the Control Panel there are steps to clear this error.
Let me know if this helped or if you need further assistance.
Thank you,
I worked on behalf of HP.

TS1347 Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

Settings>General>Accessibility>Increase Contrast
Settings>General>Accessibility>Bold Text
are some settings that may help.
There are other settings there ...they may not be to your liking but try them all anyways.
But that's about all you can do for now...except to voice your opinion to Apple here:
http://www.apple.com/feedback/ipad.html

HT5557 I highlight and study e pubs in ibooks. Now with the up date the color coding that I've be using are too dark and no way to adjust opaqueness. (SHOULD ADD THIS.) Is the an app to by to add to ibooks????

I highlight and study e pubs in ibooks. Now with the up date the color highlighters that I've be using are too dark and no way to adjust opaqueness. (YOU SHOULD ADD THIS.) Is the an app to by to add to ibooks???? Or an app to but to have other highlighter colors and be able to use the in ibooks???

I highlight and study e pubs in ibooks. Now with the up date the color highlighters that I've be using are too dark and no way to adjust opaqueness. (YOU SHOULD ADD THIS.) Is the an app to by to add to ibooks???? Or an app to but to have other highlighter colors and be able to use the in ibooks???

My colors and value are a lot darker and saturated in my navigator window.

My colors and value are a lot darker and saturated in my navigator window. Is there a way to fix this problem?

Same issue as this:
My colors look different outside Photoshop.
Mylenium

Color Settings Images are too warm and light while editing

Can someone help me understand color settings in Photoshop. My images look much lighter and warmer when I edit them than when I export them using Save for Web.
For a while I though it was because I was importing a raw file with a different color depth and profile so when it got saved as a jpg that the colors and brightness would shift. Recently, I made a graphic in Photoshop and it still looked warmer than the export. I also know temperature is displayed wrong in photoshop because when I create a neutral gray color its too warm. When it's exported using save for web the temperature is shown correctly.
If it was a mis calibrated monitor it would look warm all of the time. I'm using Photoshop CS3, my color profile is sRGB with color management turned off (its off because espon recommends this setting because it can better manage colors). Although I tried changing these settings and they don't seem to make a difference. Here's neutral gray image with screen caps to show you what I'm talking about.
http://i14.photobucket.com/albums/a317/pcofran/test/photoshop-color.jpg

Calibration tools calibrate your monitor to produce colors on screen that will look proper given your room lighting. Think of calibration as being a very precise, accurate adjustment to the contrast, brightness, and RGB controls of your monitor. Obviously, if these controls are set differently, your images will view differently. Calibration results in the monitor being set properly for display of images at a known gamma. You can get fairly good, but not totally accurate, calibration visually, without a colorimeter, using appropriate software tools.
Calibration tools also produce a profile that allows color managed software, such as Photoshop, to adjust its output for very precise reproduction within the gamut of your display. Again, there are some tools that produce a profile visually, but you get better results with a colorimeter.
Why should this be necessary? You want to display your images with the intended colors. You also want the proper colors to be sent to your printer or the files on your website. If your monitor isn't properly calibrated and profiled, pixels from the image file that are, say, light gray (RGB 200,200,200) might appear as middle gray, near-white, or even tinged with red or blue. If you adjust the colors in the image file so it displays the way you want it, the pixels in the file will no longer be light gray and will display as something else entirely on a different monitor, when printed, or when viewed at a website.

My i860 canon printer is suddenly printing color pictures with light blue and darker blue horizontal

My i860 canon printer is suddenly printing color pictures with light blue and darker blue horizontal lines. I have changed the cyan blue cartridge and the problem still exists. Does anyone know what the problem is? Thanks.

Hi CSM,
We can perform a print head cleaning and alignment on the printer to try and resolve the issue. To do this, please follow the steps below:
PRINT HEAD CLEANING
With the printer powered on, press and hold the <Resume/Cancel> button.
<1> Resume/Cancel button
When the power lamp blinks once, release the button.
Note: The power lamp will blink and print head cleaning will start. The cleaning completes when the power lamp stops blinking. (It will take about 30 seconds to a minute for the power lamp to stop blinking and remain lit solid green.)
PRINT HEAD ALIGNMENT
Confirm that the printer is powered on, and load Letter-sized white plain paper in the sheet feeder.
Note: If paper other than Letter-sized white plain paper is loaded, print head alignment cannot be performed properly.  The automatic print head alignment must be performed from the Automatic Sheet Feeder on the top of the printer. It cannot be performed from the cassette.
Press and hold the <Resume/Cancel> button, and release it when the Power lamp blinks four times. (The Power lamp will start blinking and pattern printing will start.)
Print head alignment will start automatically as the following pattern is printed.
Note:  Please wait approx. three minutes until printing is completed.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us .
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Re-coloring dark and light areas to match

Similar Messages

Maybe you are looking for