Re-coloring Imported Objects

Hi Folks,
We're using INDD CS3 on Windows XP Professional.
I have a project from a customer in which he has given us grayscale TIF images. He started the project in Quark. We're converting it to INDD CS3 for him.
When the images are imported to Quark, when a color is applied the black/gray elements of the page are re-colorized (and the white part stays white).
When the images are imported to INDD, when a color is applied the white and gray elements of the page are re-colorized (and the black part stays black).
These images are page backgrounds with black designs along the edges and white (or light gray) designs in the center. I've tried inverting the image and pulling it into INDD, but obviously I have black center then, which is worse than the colored center.
Is there a way to accomplish in INDD what Quark is doing for the customer? If not, any ideas for a workaround?
Thx,
Sandy

Sounds like the frames are filled with color. Select the object with
selection tool (black arrow) and make sure the frame is set to no fill.
Then select the image with the direct select tool (white arrow) and do
the same.
Deselect everything and then grab the color you want from the swatch
panel and drag it onto the graphic.
Bob

Similar Messages

Idoc not available in PI import objects

Hello Guru's
We are using SAP AFS6.3 and PI 7.0 .
The Basic Idoc type /AFS/MATMAS05 and /AFS/ORDERS06 is not avialable in PI imort objects. Is thete is any seetings we need to active either
in AFS or PI system for getting these Idoc in PI.
Please help in this regards
SA

Hi , i did following
1. Under the SWCV Go to the Imported Objects.
2. Right click on the IDoc and click on the Import of SAP object.
3. Give the logon server name, system number the user name and pasword of AFS system.
4. Select the IDoc u want to import.
5. Execute the import and the IDoc is imported under the SWCV.
In above step 4. ..m not able to see the /AFS/MATMAS05 Idoc how i can select???
List doesn't have AFS related Idoc. But same idoc i can see in AFS system.This is my problem.
How do i get the Idoc in 4 step List.
Rgz
Subham

Error when attempting to IMPORT object "TS_CHECK".

When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
The following short dump occurs:
Runtime Errors CONNE_IMPORT_WRONG_COMP_TYPE
Except. CX_SY_IMPORT_MISMATCH_ERROR
Date and Time 19.11.2008 15:14:08
Short text
Error when attempting to IMPORT object "TS_CHECK".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTD4" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "TS_CHECK", the component no. 4 in the
dataset has a different type from the corresponding component
of the target object in the program "SAPLSTD4".
The data type is "I" in the dataset, but "N" in the program.
Missing RAISING Clause in Interface
Program SAPLSTD4
Include LSTD4U03
Row 1
Module type (FUNCTION)
Module Name DB02_ORA_FILL_TS_CHECK__CRITOB
Trigger Location of Exception
Program SAPLSTD4
Include LSTD4U03
Row 51
Module type (FUNCTION)
Module Name DB02_ORA_FILL_TS_CHECK__CRITOB
Source Code Extract
Line
SourceCde
21
DATA: BEGIN OF TD110.
22
INCLUDE STRUCTURE TD110_STRU.
23
DATA: END OF TD110.
24
25
CURR_TIME = SY-UZEIT.
26
CURR_DATE = SY-DATUM.
27
28
CALL FUNCTION 'GET_DB_ORA_RELEASE'
29
IMPORTING
30
ORACLE_RELEASE = ORA_REL.
31
32
IF FLAG_REFRESH = 'y'. FLAG_REFRESH = 'Y'. ENDIF.
33
flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
34
35
CLEAR TS_CHECK. REFRESH TS_CHECK.
36
CLEAR CRITOBJ. REFRESH CRITOBJ.
37
CLEAR NR_CRIT_OBJ.
38
39
IF FLAG_REFRESH <> 'Y'.
40
41
Suche zunächst im Arbeitsspeicher !
42
CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
43
IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
44
TS_CHECK[] = TS_CHECK_CACHE[].
45
CRITOBJ[] = CRITOBJ_CACHE[].
46
OK_1 = 'Y'.
47
48
Suche danach in 'MONI' !
49
ELSE.
50
PERFORM PREPARE_MONIKEY USING 2.
>>>>>
IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
52
53
IF SY-SUBRC = 0.
54
OK_1 = 'Y'.
55
TS_CHECK_CACHE[] = TS_CHECK[].
56
CRITOBJ_CACHE[] = CRITOBJ[].
57
ENDIF.
58
ENDIF.
59
60
'Same procedure' für datetime:
61
IF NOT ( TD110_CACHE IS INITIAL ).
62
DATETIME-MONI_DATE = TD110_CACHE-DATUM.
63
DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
64
ELSE.
65
PERFORM PREPARE_MONIKEY USING 3.
66
IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
67
IF SY-SUBRC = 0.
68
DATETIME-MONI_DATE = TD110-DATUM.
69
DATETIME-MONI_TIME = TD110-UZEIT.
70
TD110_CACHE = TD110.
Only related SDN post is following, but solved by changing permissions for saposcol.
Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
Thanks in advance for any assistance.
KR
Gidion

Received the solution from SAP Active Global Support:
This error occurs due a corruption in the table MONI.
For solving this issue you need to clean the records of this table via the following path :
1. Call transaction ST03
2. With GOTO -> Performance database -> Content of database
3. Push button Delete data group
4. Enter ID DB
5. Continue
6. Confirm the delete
If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
Regards,
Gidion

How to get similar color for objects in different pictures

how do you get similar color for objects in different pictures
I have a prodject that i'm working on and i need to edit several images at once (preferabley) so that they are the same color. They are wooden cupboards and i need all the wood looking the same colour. In light room you can edit a group of images at the same time hence the colours are the same . Is this possible in Elements ? If so how do i do this ?
I have tried duplicating layers and it just replaces the whole image, it seems to work using levels layers but not the other layers ... I have 30 more images to do and would ideally not like to adjust all the images manually ? I dont mind doing minor tweaks. Essentially all the images where taken with the same camera and lighting and lens's ...
Screen shot is where I'm at at the moment...
I have posted this question else where but was told to repost - this is a link to my previous post as to where we got to
http://forums.adobe.com/message/4720576#4720576

You could try using the raw converter. Open one file and edit it (File>Open, pick the image and choose Camera Raw as the format before you click Open). Then open the next image and click the little four-lined square on the upper right side of the ACR window and choose Previous Conversion from the flyout menu.

Unable to Import objects into ID

Hi All,
For your support I have completed the development work and I have moved to Quality from Development. But while trying to import the one scenario in to Quality System from Development in XI, I am getting the following Error:-
Internal error: Unable to transfer changes for object Service | Q14CLNT120 to change list "XI 3.0 Import" (9a590f30-7245-11dc-9266-00306ee97ef1) since object still in change list "XI 3.0 Import" (3ae5e660-701d-11dc-942e-00306ee97ef1)
I have somehow managed to import another scenario last week into Quality, although now I am unable to import. But while trying to activate the imported scenario into Quality System I am getting another Error as below:-
Unable to move object. Change lists were not part of the same import
I tried to activate the change list..but no woek.
Could anyone please advice?
BR
Soumya

Have you checked the GUID in SLD in both the systems?
SLD-->Software Components, to check the GUID.
You can do one thing, first of delete imported objects which are not getting activated from QA, also delete the SWCV from Integration Repository.
Note: Before deleting SWCV, make sure any other working objects are not there in the same SWCV.
Now, if SWCV & GUID in both systems are same then again:
1. Export the objects from Dev (.tpz file)
2. Imort the same .tpz file to QA system.
Now go to Repository of QA and
1. Tools --> Import Design Objects
2. Tools --> Transfer from system landscape Directory --> Update Application Components.
Select your components and press Finish button.
And finally try to Acitvate your objects.
Regards,
Sarvesh
*****Reward points, if found helpfull.

Imported Object Enterprise Service Builder

Hi..
when Imported Object Enterprise Service Builder
Connection data for the R/3 import is incomplete
Open the software component version SAP BASIS 7.10 and
enter the system and the client
can not import MATMAS object
How to resolve that problem
regards
chandana

Double click on teh software component version in ESR for which you want to import idoc. Then select the raido button import of idoc interface from sap systems permitted. Then give the R3 system information like the system name, client and then try once again. It is nothing related with technical and business system.
step by step:
double click on SWCV->
Interface Import ->you have to provide system name , client then ll try to import
pls refer : http://forums.sdn.sap.com/thread.jspa?threadID=2143371&tstart=0

Why can't I change colors of objects?

why can't I change colors of objects?

Thanks KT. I did mean the Fill color, but my real issue is that changing the fill color in the inspector doesn't change the color of the selected object. In tis case, I was trying to chnage the fill color from pale blue to the more ingense blue:

My imported objects distort when I rotate them

I'm importing objects from illustrator into After Effects, but when I rotate them they distort. I also noticed that the anchor points for my objects are way off, but readjusting those anchor points doesn't help to alleviate the rotation problem.
I'm usig the CS3 suite, if that helps.

I'd guess that you're working in a non square project. I'd also guess that you have some square pixel images that are being interpreted as non square.
Please give us the specs of your project so that we can help you. There's about a zillion combinations that can cause problems, but they all go away if your footage is interpreted at the pixel aspect ratio that it was created in.

ODI Migration for 10.1.3.5 to 11.1.1.3 failed with Importing object

ODI Migration from 10.1.3.5 to 11.1.1.3 failed
DB Repositories -Oracle 11.1.0.7
I am trying to upgrade ODI 10.1.3.5 to 11.1.1.3 version
After running RCC and confirming that there are no issues I have run upgrade assistant utility
I am getting below error.
mporting file:/E:/Oracle/Middleware/Oracle_ODI1/oracledi.sdk/lib/scripts/xml/CONN_MEMORY_ENGINE.xml
[2012-05-02T06:17:27.770-07:00] [ODI] [INCIDENT_ERROR] [UPGCMP-00324] [upgrade.ODI] [tid: 14] [ecid: 0000JSDg06MF^6WFLzmJOA1FcIg5000005,0] Topology and Security Metadata upgrade failed.[[
oracle.odi.core.exception.OdiRuntimeException: com.sunopsis.tools.core.exception.SnpsSimpleMessageException: Importing object SNP_CONNECT : SUNOPSIS_MEMORY_ENGINE failed.
     at oracle.odi.impexp.support.ImportServiceImpl.internalReimportTopologyReferenceData(ImportServiceImpl.java:1372)
     at oracle.odi.impexp.support.ImportServiceImpl$18.doAction(ImportServiceImpl.java:1435)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:193)
     at oracle.odi.core.persistence.dwgobject.TransactionalDwgObjectTemplate.execute(TransactionalDwgObjectTemplate.java:48)
     at oracle.odi.impexp.support.ImportServiceImpl.reimportTopologyReferenceData(ImportServiceImpl.java:1429)
     at oracle.ias.mrua.plugin.odi.ODIPlugin$1.doInTransaction(ODIPlugin.java:774)
     at oracle.odi.core.persistence.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:119)
     at oracle.ias.mrua.plugin.odi.ODIPlugin.doUpgrade(ODIPlugin.java:770)
     at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3703)
     at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2465)
     at oracle.ias.mrua.MRUA.driver(MRUA.java:1734)
     at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)
Caused by: com.sunopsis.tools.core.exception.SnpsSimpleMessageException: Importing object SNP_CONNECT : SUNOPSIS_MEMORY_ENGINE failed.
     at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2379)
     at com.sunopsis.dwg.DwgDuplicationTools.synonymImport(DwgDuplicationTools.java:1835)
     at com.sunopsis.dwg.DwgObject.importFromObjectLst(DwgObject.java:6249)
     at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:5705)
     at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5365)
     at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5334)
     at com.sunopsis.repository.manager.RepositoryManager.importObjectsUsingImportFromXML(RepositoryManager.java:6578)
     at com.sunopsis.repository.manager.RepositoryManager.treatObjectList(RepositoryManager.java:4630)
     at com.sunopsis.repository.manager.RepositoryManager.reimportTopologyReferenceData(RepositoryManager.java:6820)
     at oracle.odi.impexp.support.ImportServiceImpl.internalReimportTopologyReferenceData(ImportServiceImpl.java:1368)
     ... 11 more
Caused by: com.sunopsis.dwg.SQLMasterReposException: ORA-00001: unique constraint (ODIM.AK_CONNECT) violated
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:440)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:837)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:445)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:191)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:523)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1009)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1315)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3576)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3657)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.generated.GeneratedSnpConnect.insertAction(GeneratedSnpConnect.java:957)
     at com.sunopsis.dwg.dbobj.SnpConnect.insertAction(SnpConnect.java:1188)
     at com.sunopsis.dwg.DwgObject.insertActionForDuplication(DwgObject.java:2996)
     at com.sunopsis.dwg.DwgObject.insertForDuplication(DwgObject.java:3274)
     at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2332)
     ... 20 more
[2012-05-02T06:17:29.895-07:00] [ODI] [INCIDENT_ERROR] [] [upgrade.ODI] [tid: 14] [ecid: 0000JSDg06MF^6WFLzmJOA1FcIg5000005,0] [[
--------- ODIPlugin.doUpgrade called org.springframework.transaction.TransactionSystemException: Could not commit ODI-JPA transaction; nested exception is javax.persistence.RollbackException: Transaction rolled back because transaction was set to RollbackOnly.
Caused by: javax.persistence.RollbackException: Transaction rolled back because transaction was set to RollbackOnly.
     at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:92)
     at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commit(EntityTransactionImpl.java:63)
     at oracle.odi.core.persistence.jpa.JpaOdiTransactionManager.doCommit(JpaOdiTransactionManager.java:362)
     at org.springframework.transaction.support.AbstractPlatformTransactionManager.processCommit(AbstractPlatformTransactionManager.java:651)
     at org.springframework.transaction.support.AbstractPlatformTransactionManager.commit(AbstractPlatformTransactionManager.java:622)
     at oracle.odi.core.persistence.transaction.support.TransactionManagerSpringAdapter.commit(TransactionManagerSpringAdapter.java:56)
     at oracle.odi.core.persistence.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:132)
     at oracle.ias.mrua.plugin.odi.ODIPlugin.doUpgrade(ODIPlugin.java:770)
     at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3703)
     at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2465)
     at oracle.ias.mrua.MRUA.driver(MRUA.java:1734)
     at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)

I also want to do the ODI Migration for 10.1.3.5 to 11.1.1.3, can you let me know your detail steps, many thanks in advance.

Creating message type in XI with imported objects

Hi,
I have imported an Idoc Structure into XI.
Now I need to create a message type with structure from imported Idoc + some additional fields.
Can some one tell me how to go about this. Because once I drag and drop the imported Idoc structure, I doesn't allow me to add any more fields during message type creation.
Is there a different to way to achieve this.
Best Regards,
Kiran

Hi Kiran,
the Integration Builder supports two ways of modelling an interface. The first way is to build the required datatypes from scratch (with the datatype editor) then define (fault) message types using these datatypes and finally define the message interface.
The second way is to use an externally defined structure by importing an IDoc or RFC from an R/3 or an external DTD/XSD/WSDL from filesystem. Then define your Message Interface using the messages from the imported objects.
Currently there is nearly no support for mixing these two approaches as you have in mind (taking an externally defined structure as starting point, then enhance this structure within the Integration Builder).
The best workaround I can suggest to you, is import the IDoc, take the XSD which is displayed for it, download it to your local file system, edit it there (with notepad when you are an XSD expert, with some other tool like XML Spy otherwise) and upload the modified file as External Definition.
BTW: For this procedure you do not necessarily need to upload the IDoc to the Repository. As far as I know the R/3 also offers the possibility to generate an XSD representation for an IDoc (do not remember the exact way to go there).
Greetings Stephan

IDX2 Vs Imported Objects

We can import the IDOC Meta Structure using the Transaction IDX2, if I import that in which place the Structure will be stored?
Whether this structure is used by all the SWCV?
Then what is the use of the Imported Objects, there also we have the IDOC importing facility?
Thanks.

Hi Pete,
Then what is the use of the Imported Objects, there also we have the IDOC importing facility?
In IR the imported Objects provide the structure that we will use in Message mapping, message interfcae and other IR Objects.
check this link: http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
IDX2
check my reply in this
Re: Use Of IDX2
Sachin

Coloring 3d objects

Hi everybody,
I need help very urgently.
I'm trying to open 3D model from stl file and coloring each object with different color.
I'm able to open all these object but I'm facing problems with the coloring part.
Please, if any one knows the solution give to me.
Thanks

What are you trying to change. Are you mapping color points to the .stl? If so, then perhaps this example will be helpful.
Connect Sensor Data to 3D Models:
http://zone.ni.com/devzone/cda/tut/p/id/7335
Or are you just wanting to change the color of the mesh? The Using Meshes.vi example found from the NI Example Finder (Help>>Find Examples) shows the invoke node (SetMeshParms) to use.
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources

Coloring PowerView Objects

Hi,
Can I fill color in PowerView objects, for eg. need to fill Green\Yellow\Red in some fields to indicate their status?
Thanks

Hi TutulM,
Here is the link for Key performance indicators (KPIs) in Power View
Moreover, changing themes and object coloring is available in powerview but these changes will apply regardless of conditions. Conditional coloring of objects is handled internally by PowerView. In some situations like KPIs, you can choose the color options
to be displayed on your report.
Hope you get the answer.
Thanks,
Jazib

Imported Objects - IDOC

Hello,
I'm trying to find a data type that is used within another data type.
The first type is an imported object IDOC: ORDERS.ORDERS02.ZORDERS1
within this object is a data type called ZORDERS1.Z1EDPA1 and that is the data type I need to edit. I am unable to locate this type in the imported objects folders or listed as a data type under any namespaces in the Intergration Repository.
Does anyone know where I might be able to find it and edit it?
Thanks,
Matt

In XI I have an IDOC adapter that takes a PO from SAP R/3 and sends it to our SUS system. When I look at the POs being sent I see that XI uses the type ORDERS.ORDERS02.ZORDERS1 and the sender namespace is urn:sap-com:document:sap:idoc:messages. Within that type there is a sub-type (for the segment Z1EDPA1) that I need to edit.
Currently the XI shows this segment as having two data types defined within it: segment and ZZECHANGEREQID. I need this data type to show all the fields within the segment name1, name2, address, etc.
Where is this namespace urn:sap-com:document:sap:idoc:messages defined?
Thanks,
Matt

Imported objects not visible

Hi,
We have to import some namespaces from one XI server to another.
when i try importing into the target server i get information that the import was successful but i cannot see the imported objects.
When i use the find transports option to view the objects that were imported im am able to see all my design objects.
The cache notifications also indicate that the transport was successful.
Am i missing out on something? What could be the possible reason for this behavior?
One more thing clarification i want, is regarding exporting namespaces.
is it possible to export individual namespaces?
Im posting this question because even when i chose to export individual namespaces rather than the SWCV itself , still we got the entire SWCV and not the individual namespace.
Please give your inputs regarding this.

siva,
Im posting this question because even when i chose to export individual namespaces rather than the SWCV itself , still we got the entire SWCV and not the individual namespace.
>> this happends that one disavt we have even though you transport namespace you get allswcv.
We have to import some namespaces from one XI server to another.
when i try importing into the target server i get information that the import was successful but i cannot see the imported objects.
When i use the find transports option to view the objects that were imported im am able to see all my design objects.
>> youneedimport corresponding swcv and then the namespaces.
Regards
sreeram.g.reddy

Re-coloring Imported Objects

Similar Messages

Maybe you are looking for