Re-configuring network services - after permanently removing serverfrom Tree
We have a company that has left our network, and we're
preparing to remove its server and related objects
from our Tree.
Including this server, we have five NetWare 6.5 servers.
All are on their own boxes, except for our GWIA/WebAccess
server, which is on a Virtual machine. Three servers, including
the one being removed are File Servers, the remaining two are
Application Servers related to GroupWise.
Our two GroupWise servers share the same Context, but all our
other servers (including the one being removed) are in their
own Context. All Contexts are directly below our one Tree.
The server being removed has a Read/Write Replica, serves as a
Primary Time Source and an SLPDA.
Of our remaining four servers:
- One is a Reference Time Source with a Read/Write Replica
- One is a Primary Time Source and SLPDA with a Master Replica
- One has our GroupWise POA and a Secondary GWIA running
- One has our Primary GWIA and WebAccess running
....for our two GroupWise-related servers, Directory Services
were removed to improve performance.
The number of network users should be down to about 250-350 users.
What would be the best practice recommended for handling Directory
Services, Time Source, and SLPDA's in the above scenario?
- Should we add back, Directory Services to one of our GroupWise servers
(providing a third server containing a Replica)?
- Should we add a second Primary Time Source to one of our GroupWise
servers?
- Are there any problems running a second SLPDA to a GroupWise server?
Thanks,
Steve
Steve,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Similar Messages
-
Can't configure Reporting Services after installation
Environment: SQL Server 2008 R2 Reporting Services Enterprise on Windows Server 2008 R2 Enterprise
Reporting services was installed for me by admins with "install but don't configure" option. My domain account is a member of local administrators group, but when I open Reporting Services configuration manager, I can't go to any of the tabs
other than the Service Account one. The Web Service URL and Database tabs are grayed out and inaccessible.
Any ideas?
thx!
-PeterHello,
In addition to above: make sure that Exchange 2013 is installed correctly. Check Exchange installation logs and run the Get-ExchangeServer command using Exchange Management Shell on the new server. You should see both Exchange 2010 and Exchange 2013 servers.
Hope it helps,
Adam
CodeTwo: Software solutions for Exchange and Office 365
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster. -
Disruptions in network service after iOS7.1 update
Ever since iOS7.1 update on my iPhone 5, the 4G LTE icon has disappeared from the homepage. The 3G and 1x signals are spotty (at best). At times, I can't not hear the dial tone when dialing out. At times, I can't not hear the voice of caller when I slide to pick up the call. I brought these issues to 2 sales managers at a local coporate VZ store, none were helpful. The issues seemed non-existent when I was inside the store, but they persist after leaving the vicinity. I never had these issues with the previous iOS version. The sales managers seem clueless with the issues and try to chalk it up with VZ "service line" and then suggest for me to call VZ customer service hotline to work around the issue. I'm extremely not happy with the level of indifference I received from these so-called managers. It looks like I'd no longer be a VZ customer anytime soon.
I tried your chat - it was booked, no one available to help. You also took away the *228 option yet it's still on your website as am option.
My issue is that phone calls from my house do not go through or if they manage to connect, they drop. If I stand outside my house I have better luck. I know you can check our lines to see all this. This problem started a couple of weeks ago. Nothing has changed at our end. Nothing.
Cherie Squire
Sent from my iPhone -
After
sql server 2012 installation, I attached my production db. Because of some reasons, i
changed sql engine account from network service user to system user by means of sql server configuration manager.
Now , there isn’t
a problem at sql server running system. But
I have doubts that
this can produce problems later. Because sql server database engine account must have privileges that listed below;
Log on as a service (SeServiceLogonRight)
Replace a process-level token (SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
While sql server installation, setup gives these
privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
privileges.
Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
Log on as a service (SeServiceLogonRight)
Bypass traverse checking
(SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
Replace a process-level token (
this can be set from user rights assignments)
Adjust memory quotas for a process
(this can be set from user rights assignments)
Permission to start SQL Writer (
? - give advice )
Permission to read the Event Log service (
? - give advice )
Permission to read the Remote Procedure Call service (
? - give advice )Our server is windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu that is in local security policy settings gui.
And i have seen those permissions below were not granted to system user;
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
So, briefly you say, don't panic ? -
[Solved] SystemD, how to start a service after network is up.
Hello,
I'm recently involved to set up a daemon which should be ready after boot (aria2). Then it fails, as it fails minidlna as well.
The reason is that they try to come up but there's no host to talk to. See this page.
For my purposes, it should be good when the daemons find the necessary to stay alive (even they won't have a network fully ready, that may happen in less than a minute later). For minidlna is needed a valid IP which could be 127.0.0.1 or localhost, for aria2 it may be same or just looking for a RPC binding.
This what the logs are telling me.
I was trying to set more dependencies in the service, but even to set
After=wpa_supplicant.service
it doesn't have effect.
I don't find a solution, as far as my knowledge spans. Another chance would take to set a systemD timer and when that will be gone to start the daemon. Sorry but I don't know much about that.
Looking for someone here to guide to right direction.
TIA
Last edited by TheSaint (2013-07-15 03:12:37)WonderWoofy wrote:It depends on what network management utility you use and therefore also how you connect. If you are using an ethernet connection, you could just use dhcpcd@<interface>.service. This is a very simple service, and the network.target will not be reached until the IP address and connectivity is established.
Meanwhile some good suggestion (like yours) came up, I've tried a couple of recipes. But dhcpcd.service didn't get it right. Maybe dhcpcd@<interface>.service, would work, I'll see later.
I got this working:
[Unit]
Description=aria2 Service
Requires=network.target
After=dhcpcd.service
[Service]
Type=forking
User=aria2
Group=aria2
EnvironmentFile=/etc/conf.d/aria2.conf
WorkingDirectory=/var/aria2
ExecStart=/usr/bin/aria2c $ARIACMD
ExecReload=/usr/bin/kill -HUP $MAINPID
RestartSec=1min
Restart=on-failure
[Install]
WantedBy=multi-user.target
You may note the After=dhcpcd.service, but it doesn't work. I found RestartSec=1min ,Restart=on-failure more effective and perhaps less blocking to wait for the network to be ready. As a server this should be a small issue, very seldom compared with the running time. We (family members) can accept a little wait for the service to be on.
Exactly I don't know which of the two is the right solution, maybe the delay is the right one.
I was doing a cron scheduled job, before using systemd boot, which was kicking minidlna every 5 minutes, since it was dieing often. I didn't discover what was the reason.
I think I'll have to study another recipe which sets up a timer and keep an eye on these two services, for the long term service. But even cron would suffice, I think.
WonderWoofy wrote:if you are using wireless, the only two real solutions would be to use netctl@<profile>.service, which too won't reach the network.target until a conplete connection is made
Yes I'm on wireless network and the interface plugged on USB . My intent should go beyond any particular configuration. Maybe because I'd like to show a working setup, which may fit for all configuration (90 % )
I have to admit that the actual solution do not care much whether the network is found, so I hope to get a smarter setup that counts on the necessary tools before try something. However it's proved that they fail when no connection to the router is done. But I'm preferring that they succeed.
WonderWoofy wrote: NetworkManager gets around this by implementing an additional service called (unimaginatively) NetworkManager-wait-online.service, which is pulled in automatically when you enable NetowrkManager.service.
As I stated above I'm expecting a solution that won't pull in so much dependencies. Even NM is my connection manager, on the server.
WonderWoofy wrote:
You probably also want to use Requisite=aria2c.service on the minidlna.service as well. This too means that it will be started after aria2c, but that it will not start at all if it is not running or fails.
Additionally, you could try using the Requisite configuration on the minidnla, while setting the aria2c to restart itself on failure. So that it will keep trying, and once it does, then minidlna will start.
looks like a dog biting the tail . It's much preferable a separated failure, just in case.
WonderWoofy wrote:Edit: Also, it is not SystemD. It is systemd (like other "daemon" binaries in *nix).
I'm quite sure I saw it somewhere, none of my inventions
Last edited by TheSaint (2013-07-13 07:10:33) -
SharePoint adding, then removing Network Service to local groups
After upgrading our two server farm to SharePoint 2010, SP2, April 2014 CU, we've noticed activity in our event log when the Timer Service restarts daily and when FIM syncs run. It looks like SharePoint is adding the Network Service account to
the local groups IIS_IUSRS and WSS_WPG, then removing it a little later on.
Does anyone know why this happens? Is it expected activity or a bug with the version we are running?
Thanks in advance for your time- RobHi Rob,
According to your description, my understanding is that you want to know why SharePoint adds and removes the Network Service account to local groups.
Per the thread below, it seems like it is an internal SharePoint process and SharePoint adds this user as a test to validate whether it has the rights necessary to add users to local groups.
More reference:
http://social.technet.microsoft.com/Forums/en-US/1d451db9-fc73-4b1a-a532-7e89be2888ee/sharepoint-automatically-adding-network-service-account-to-the-iisusers-group?forum=sharepointadminprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
After installing FF 5.0 I am receiving a list of incompatible Add-Ons. I go into 'Extensions' and click to remove them, exit FF and lauch FF again, the same incompatible add-ons list appears. Is there a way to permanently remove the old Add-ons?
Thanks but I don't think this will help. Like I said, all of my add-ons were working fine and compatible until after running a previous version of FF. I am sure they are still compatible, but they are not working at all.
I even checked my profile folder and all of the extensions' data is all still there but FF5 is just not reading it correctly. (like adblock plus... I see the folder for it but FF5 doesn't have it on the add-on manager page when I run FF5) -
Cant remove service after removing db
Hi,
I have created a DB TESTDB with services. We removed the db, but a couple of services are stil there:
srvctl remove service -d TESTDB -s oraTESTDB.SERV1.cs -f
PRKR-1001 : cluster database TESTDB does not exist
PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: TESTDB
[oracle@cluster1] /oracle00/home > crs_stat -t
Name Type Target State Host
ora....SERV1.cs application OFFLINE OFFLINE
NAME=ora.TESTDB.SERV1.cs
TYPE=application
TARGET=OFFLINE
STATE=OFFLINE
How would can I remove this service without the DB being there?
Regards
NicoI had similar problem. I fixed this doing following.
(a) Unwanted resource was found in offline status.
crs_stat -t
Name Type Target State Host
--------------------------------------------------<
ora.GCCR01.db application OFFLINE OFFLINE
ora....R1.inst application ONLINE ONLINE amrds4100a
(b) I couldnot able to remove that resource using SRVCTL
C:\Documents and Settings\theetha.alagusundara>srvctl remove database -d GCCR01
Remove the database GCCR01? (y/[n]) y
PRKR-1001 : cluster database GCCR01 does not exist
PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: GCCR01
(c) I had a typo when I used crs_unregister
crs_unregister GCCR01
CRS-0210: Could not find resource 'GCCR01'.
(d) When I specified the full resource name it got removed.
crs_unregister ora.GCCR01.db
Regards,
Theetha
Edited by: Theetha on Sep 8, 2008 8:50 AM -
Once i go to a place wherein there is no network, my phone says no network, but after i recover my network, its still saying that it still has no service. I try to put to airplane mode then put back to normal. I restart, then the network recovers. Do you experience this kind of problem? Any solutions? It seems that upgrades are not a good idea. I have an iphone4s, but with updated 6.0.1...
try to enter a gift card to cover your previous balance. Once covered it probably will allow you to change payment.
-
my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well. -
User Profiles Synch Service starting failes after "ILM Configuration: Starting services"
Hello guys.
I tried to configure user profiles synchronization and it could not be started without any problems as expected :)
This time I got the following error in logs:
02.05.2013 10:54:03.34 OWSTIMER.EXE (0x17DC)
0x183C SharePoint Portal Server
User Profiles 9q1k
Medium ILM Configuration: Starting services.
0160471f-15fc-4d97-8227-05b86f4d0fc7
02.05.2013 10:54:33.52 OWSTIMER.EXE (0x17DC)
0x183C SharePoint Portal Server
User Profiles 9q15
High UserProfileApplication.SynchronizeMIIS: Failed to configure ILM, will attempt during next rerun. Exception: System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size
of the argument list. at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args) at System.String.Format(IFormatProvider provider, String format, Object[] args) at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.IsStarted(ServiceController
controller) at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.WaitUntilStarted() at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance
profileSyncInstance). 0160471f-15fc-4d97-8227-05b86f4d0fc7
02.05.2013 10:54:33.52 OWSTIMER.EXE (0x17DC)
0x183C SharePoint Portal Server
User Profiles 9i1u
Medium UserProfileApplication.SynchronizeMIIS: End setup for 'UserProfilesService'.
0160471f-15fc-4d97-8227-05b86f4d0fc7
So, what I have and what I've done:.
1) I have a test 2-servers farm installation (Database server + WFE/Application server); SQL Server 2008 R2 SP2, SHP 2010 SP1 + October 2012 CU; There are no any service applications except default ones(Security Token Service and Application Discovery
and Load Balancer Service Application) as well as there are no any services started except default :)
2) I created a site collection and manage path for MySites, created a new UPA and its proxy.
That's all. Now, if I try starting User Profiles Synchronization Service, it stucks on "starting" for about 10 mins and I see the error above in ULS. Hope you can somehow help me.
By the way, I don't want a both sides synchronization this time, I just need to check some stuff with People Search. Will "Read" rights for Managed Account in AD be enough to export profiles from AD? (I mean if I select my farm account as a synchronization
account, will it work?)
Thank's in advance!
Anton.
UPDATED
The problem probably was due to the lack of internet access. As Raymond
Diack said:
"the farm account needs internet access to do a CRL check to these sites:
crl.microsoft.com
ctldl.windowsupdate.com
ctldl.windowsupdate.nsatc.net
www.update.microsoft.com.nsatc.net "Sure, here is the stack near the error without any filters:
11:13:11.88 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q1j Medium ILM Configuration: Opening firewall ports. 589d9196-6647-4432-9ab0-a389871310b7
11:13:12.13 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q1k Medium ILM Configuration: Starting services. 589d9196-6647-4432-9ab0-a389871310b7
11:13:12.36 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:80a1f95b-37a3-45f1-89a6-f33de57b678a'
11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:80a1f95b-37a3-45f1-89a6-f33de57b678a' 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.38 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=4,01622273221876 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
11:13:12.75 OWSTIMER.EXE (0x0AA8) 0x16F0 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job job-timer-locks) ea70e10e-4455-47ea-a3fd-e7cb0f0a9ce4
11:13:12.75 OWSTIMER.EXE (0x0AA8) 0x16F0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job job-timer-locks). Время выполнения=4,16512433842849 ea70e10e-4455-47ea-a3fd-e7cb0f0a9ce4
11:13:22.52 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:5b799d56-3784-48ff-beaf-6fb6bfeade78'
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:5b799d56-3784-48ff-beaf-6fb6bfeade78' 941bbfb5-84aa-411e-b310-74830120b860
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 941bbfb5-84aa-411e-b310-74830120b860
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 941bbfb5-84aa-411e-b310-74830120b860
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 941bbfb5-84aa-411e-b310-74830120b860
11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=2,92432418086656 941bbfb5-84aa-411e-b310-74830120b860
11:13:26.78 OWSTIMER.EXE (0x0AA8) 0x0894 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish) 6044b3fe-8ca7-4f76-81b0-ea55e6795d5b
11:13:26.78 OWSTIMER.EXE (0x0AA8) 0x0894 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job SchedulingUnpublish). Время выполнения=2,56094000773841 6044b3fe-8ca7-4f76-81b0-ea55e6795d5b
11:13:32.66 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:f5648c05-71d7-443c-b12d-946eb36bcb3f'
11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:f5648c05-71d7-443c-b12d-946eb36bcb3f' 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:32.71 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:32.72 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=65,7127512016192 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
11:13:39.79 OWSTIMER.EXE (0x0AA8) 0x0500 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job SchedulingApproval) 69e34469-a502-4257-80f4-d8fb990f2bf7
11:13:39.80 OWSTIMER.EXE (0x0AA8) 0x0500 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job SchedulingApproval). Время выполнения=11,6191443325898 69e34469-a502-4257-80f4-d8fb990f2bf7
11:13:40.33 w3wp.exe (0x1364) 0x0E98 SharePoint Portal Server Runtime 8gp7 Medium Topology cache updated. (AppDomain: /LM/W3SVC/961767364/ROOT-1-130050376913614507)
11:13:42.88 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:23bdd02e-0716-4697-b55d-55862694ebe1'
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:23bdd02e-0716-4697-b55d-55862694ebe1' c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=2,88158131829604 c7b0b8bc-dad4-4863-98e0-92838dafa933
11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q15 High UserProfileApplication.SynchronizeMIIS: Failed to configure ILM, will attempt during next rerun. Exception: System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list. at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args) at System.String.Format(IFormatProvider provider, String format, Object[] args) at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.IsStarted(ServiceController controller) at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.WaitUntilStarted() at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance). 589d9196-6647-4432-9ab0-a389871310b7
11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9i1u Medium UserProfileApplication.SynchronizeMIIS: End setup for 'UPS'. 589d9196-6647-4432-9ab0-a389871310b7
11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Topology 8xqz Medium Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 15232 Ensure: False, HashCode: 11248478, Id: c8e4ed56-ab72-4b99-8532-d282d3f26896, Stack: at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate() at Microsoft.SharePoint.Administration.SPJobDefinition.Update() at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result) at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result) 589d9196-6647-4432-9ab0-a389871310b7
11:13:42.92 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Время выполнения=161321,353202712 589d9196-6647-4432-9ab0-a389871310b7
11:13:42.96 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Topology 8dyx High Deleting the SPPersistedObject, ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. 589d9196-6647-4432-9ab0-a389871310b7 -
CUCM network services missing after restore
Hi
I have a cucm 8.0.3 appliance, i'm migrating to vmware but when i restore the backup in the vmware i lost like 20 services (network services), how can i fix it?
ThanksHi Alejandro,
It sure sounds like this bug;
CSCtl82213 Bug Details
Bug #4 of 6 | < Previous | Next >
CUCM Serviceability Network Services page missing services on VMware
Symptom:
Under the CUCM Serviceability webpage, Control Center - Network Services, some
or all services are not displayed so they cannot be started, stopped, or restarted.
Conditions:
CUCM 8.x running on a VMware server.
Workaround:
The workaround for this defect requires TAC to access your server with a remote
support account. Open a TAC SR and reference this defect to get it fixed.
Status
Fixed
Severity
3 - moderate
Last Modified
In Last 2 weeks
Product
Cisco Unified Communications Manager (CallManager)
Technology
1st Found-In
8.0
8.5(1)
8.5(1.10000.13)
Fixed-In
8.6(0.98000.19)
8.6(0.98000.56)
8.6(0.99981.2)
8.6(1.10000.1)
8.6(1.96000.51)
8.6(1.96000.1)
8.6(0.95230.2)
8.6(1.10000.43)
8.5(1.12024.1)
1.0(0.98000.42)
8.6(1.95040.1)
8.6(1.10001.1)
8.6(1.95190.40)
8.6(1.97011.1)
8.6(1.97011.2)
8.6(1.99989.1)
9.0(0.95010.1)
8.6(0.95180.9)
8.6(1.99986.1)
8.5(1.12900.6)
8.6(1.95020.1)
8.6(1.95020.58)
Cheers!
Rob
"Talk about a dream
Try to make it real"
- Springsteen -
Network problems after update; system reinstall not fixing it.
Hello, first post here ^^
Sorry if I write with a bit of engrish. I'm very tired ^^"
My brother's laptop, a Portuguese Classmate PC (aka "Magalhães", version MG2 -- unfortunately, I can't find the corresponding international version, but have a picture) doesn't has any network at all, be it wired or wireless, with the updates of 3/August/2011 installed. I think the problem is udev.
I have no problems when using an installation media, at least for wired network.
Even after reinstalling, I still have no network.
Wired
The problem with wired, is that the eth0 interface is gone. Have tried network and NetworkManager, and it's just gone. In the output of ifconfig I only have the loopback interface (and would have wlan0, if I had the firmware for the wireless card installed).
Wired problem solved! Sorry, I actually searched the Internet for a solution and couldn't find anything useful, and only now noticed there's already a thread here about it. I should have searched this forum, instead of the Internet... sorry!
Wireless
Previously, I only had to install the rtl8192se chipset drivers from AUR.
But now, with the latest updates, the kernel [size=1](or the udev, I don't know which it is)[/size]was constantly giving me errors through tty, regarding to wifi. It could scan for networks, but not connect. I have tried with WPA and no security, result was the same.
Config files and logs
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pt_PT.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Lisbon"
KEYMAP="pt-latin1 pt-latin9 euro"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(mii r8169 pcspkr snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="MTomas"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(syslog-ng dbus network netfs @openntpd crond cups alsa gdm)
hwdetect --show-net
NET : ppp_generic slhc rfkill
dmesg (sorry about the very long output, I don't really know whats' useful or not...)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5c0000 (usable)
[ 0.000000] BIOS-e820: 000000003f5c0000 - 000000003f5cc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f5cc000 - 000000003f5cf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5cf000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Intel Corporation Intel powered classmate PC/Intel powered classmate PC, BIOS BPPNV20L.90A.0008.2010.0909.1822 09/09/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f5c0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7d40] f7d40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f5c0000
[ 0.000000] 0000000000 - 003f400000 page 2M
[ 0.000000] 003f400000 - 003f5c0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f5c0000 @ 3f5bd000-3f5c0000
[ 0.000000] RAMDISK: 37c12000 - 37e01000
[ 0.000000] ACPI: RSDP 00000000000f7d10 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003f5c5013 00074 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f5cbc60 000F4 (v03 INTEL 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 000000003f5c61a9 05A43 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003f5cefc0 00040
[ 0.000000] ACPI: TCPA 000000003f5cbd54 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: MCFG 000000003f5cbd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003f5cbdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000003f5cbdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003f5cbe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 000000003f5cbe8a 00176 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 000000003f5c5609 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5563 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5087 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f5c0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000003f5c0000
[ 0.000000] NODE_DATA [000000003f5b8000 - 000000003f5bcfff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003dc00000-ffff88003e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003f5c0
[ 0.000000] On node 0 totalpages: 259405
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3493 pages used for memmap
[ 0.000000] DMA32 zone: 251931 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f200000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255851
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1011404k/1038080k available (4019k kernel code, 460k absent, 26216k reserved, 3335k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.531 MHz processor.
[ 0.003340] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.60 BogoMIPS (lpj=5541770)
[ 0.003531] pid_max: default: 32768 minimum: 301
[ 0.003952] Security Framework initialized
[ 0.004047] AppArmor: AppArmor disabled by boot time parameter
[ 0.004419] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.007667] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008243] Mount-cache hash table entries: 256
[ 0.009502] Initializing cgroup subsys ns
[ 0.009600] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009736] Initializing cgroup subsys cpuacct
[ 0.009925] Initializing cgroup subsys memory
[ 0.010064] Initializing cgroup subsys devices
[ 0.010158] Initializing cgroup subsys freezer
[ 0.010249] Initializing cgroup subsys net_cls
[ 0.010340] Initializing cgroup subsys blkio
[ 0.010565] CPU: Physical Processor ID: 0
[ 0.010656] CPU: Processor Core ID: 0
[ 0.010743] mce: CPU supports 5 MCE banks
[ 0.010839] CPU0: Thermal monitoring handled by SMI
[ 0.010849] using mwait in idle threads.
[ 0.012451] ACPI: Core revision 20110316
[ 0.023363] ftrace: allocating 15966 entries in 63 pages
[ 0.026783] Setting APIC routing to flat
[ 0.027287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061420] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.063329] APIC calibration not consistent with PM-Timer: 359ms instead of 100ms
[ 0.063329] APIC delta adjusted to PM-Timer: 1039059 (3740601)
[ 0.063329] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.063329] ... version: 3
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.080180] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106732] Booting Node 0, Processors #1 Ok.
[ 0.106880] smpboot cpu 1: start_ip = 98000
[ 0.006666] CPU0: Thermal monitoring enabled (TM1)
[ 0.203381] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.210009] Brought up 2 CPUs
[ 0.210112] Total of 2 processors activated (6652.11 BogoMIPS).
[ 0.210657] devtmpfs: initialized
[ 0.217499] PM: Registering ACPI NVS region at 3f5cc000 (12288 bytes)
[ 0.221762] print_constraints: dummy:
[ 0.222075] NET: Registered protocol family 16
[ 0.222464] ACPI: bus type pci registered
[ 0.222965] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[ 0.223102] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[ 0.225887] PCI: Using configuration type 1 for base access
[ 0.226974] bio: create slab <bio-0> at 0
[ 0.229126] ACPI: EC: Look up EC in DSDT
[ 0.237091] ACPI: SSDT 000000003f5c5ed2 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.237853] ACPI: Dynamic OEM Table Load:
[ 0.238022] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.238519] ACPI: SSDT 000000003f5c5868 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.239233] ACPI: Dynamic OEM Table Load:
[ 0.239401] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.240151] ACPI: SSDT 000000003f5c60d5 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.240891] ACPI: Dynamic OEM Table Load:
[ 0.241061] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.241466] ACPI: SSDT 000000003f5c5e4d 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.242187] ACPI: Dynamic OEM Table Load:
[ 0.242357] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.243484] ACPI: Interpreter enabled
[ 0.243588] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.243922] ACPI: Using IOAPIC for interrupt routing
[ 0.255265] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.263625] ACPI: No dock devices found.
[ 0.263714] HEST: Table not found.
[ 0.263800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.265505] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.265765] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.266086] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.266668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.270174] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.270276] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.270400] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.270524] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.270647] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.270772] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.270898] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
[ 0.271021] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
[ 0.271118] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.271263] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.271320] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.271335] pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
[ 0.271346] pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
[ 0.271356] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.271366] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
[ 0.271410] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.271424] pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
[ 0.271531] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.271559] pci 0000:00:1b.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.271649] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271659] pci 0000:00:1b.0: PME# disabled
[ 0.271694] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.271793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271802] pci 0000:00:1c.0: PME# disabled
[ 0.271842] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.271935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.271944] pci 0000:00:1c.1: PME# disabled
[ 0.271983] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.272082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.272091] pci 0000:00:1c.2: PME# disabled
[ 0.272136] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.272197] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.272257] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.272338] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.272398] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.272459] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.272511] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.272596] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.272670] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.272701] pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
[ 0.272808] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.272817] pci 0000:00:1d.7: PME# disabled
[ 0.272848] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.272944] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.273056] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.273215] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.273244] pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
[ 0.273259] pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
[ 0.273274] pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
[ 0.273289] pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
[ 0.273304] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
[ 0.273334] pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
[ 0.273383] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.273391] pci 0000:00:1f.2: PME# disabled
[ 0.273418] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.273494] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.273613] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.273709] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.273718] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.273730] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.273884] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.273955] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.274076] pci 0000:03:00.0: reg 18: [mem 0xf0520000-0xf0520fff 64bit pref]
[ 0.274148] pci 0000:03:00.0: reg 20: [mem 0xf0510000-0xf051ffff 64bit pref]
[ 0.274199] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.274363] pci 0000:03:00.0: supports D1 D2
[ 0.274368] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274387] pci 0000:03:00.0: PME# disabled
[ 0.274568] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.274663] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.274672] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.274685] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.274782] pci 0000:04:00.0: [10ec:8172] type 0 class 0x000280
[ 0.274812] pci 0000:04:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.274832] pci 0000:04:00.0: reg 14: [mem 0xf0100000-0xf0103fff]
[ 0.274954] pci 0000:04:00.0: supports D1 D2
[ 0.274960] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274970] pci 0000:04:00.0: PME# disabled
[ 0.280025] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.280144] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.280152] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.280164] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280266] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
[ 0.280369] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.280378] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.280390] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280397] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.280404] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.280411] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.280417] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.280424] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.280431] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.280438] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[ 0.280445] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.280451] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.280490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.280660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.280757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.280849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.280941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.281235] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.281497] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.281828] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.282049] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.282310] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.282632] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.297275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.297984] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.298679] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.299375] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.300108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.300923] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.301740] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.302444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.303298] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.303339] vgaarb: loaded
[ 0.303656] PCI: Using ACPI for IRQ routing
[ 0.303746] PCI: pci_cache_line_size set to 64 bytes
[ 0.303778] pci 0000:00:1b.0: address space collision: [mem 0xf0500000-0xf0503fff 64bit] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.303990] pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304159] pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304389] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.304395] reserve RAM buffer: 000000003f5c0000 - 000000003fffffff
[ 0.304709] NetLabel: Initializing
[ 0.304793] NetLabel: domain hash size = 128
[ 0.304878] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.304991] NetLabel: unlabeled traffic allowed by default
[ 0.305112] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.305216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.305468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.316700] Switching to clocksource hpet
[ 0.319651] Switched to NOHz mode on CPU #0
[ 0.319806] Switched to NOHz mode on CPU #1
[ 0.333572] pnp: PnP ACPI init
[ 0.333697] ACPI: bus type pnp registered
[ 0.335270] pnp 00:00: [bus 00-3f]
[ 0.335277] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.335283] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.335289] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.335295] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.335301] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.335307] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.335312] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.335318] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.335324] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.335329] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.335335] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.335341] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.335346] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.335352] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.335358] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.335363] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.335369] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.335375] pnp 00:00: [io 0x0d00-0xfdff window]
[ 0.335381] pnp 00:00: [mem 0x00000000 window]
[ 0.335386] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.335514] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.335756] pnp 00:01: [io 0x0010-0x001f]
[ 0.335763] pnp 00:01: [io 0x0024-0x0025]
[ 0.335768] pnp 00:01: [io 0x0028-0x0029]
[ 0.335773] pnp 00:01: [io 0x002c-0x002d]
[ 0.335778] pnp 00:01: [io 0x0030-0x0031]
[ 0.335783] pnp 00:01: [io 0x0034-0x0035]
[ 0.335788] pnp 00:01: [io 0x0038-0x0039]
[ 0.335793] pnp 00:01: [io 0x003c-0x003d]
[ 0.335798] pnp 00:01: [io 0x0072-0x0077]
[ 0.335803] pnp 00:01: [io 0x0080]
[ 0.335808] pnp 00:01: [io 0x0090-0x009f]
[ 0.335813] pnp 00:01: [io 0x00a4-0x00a5]
[ 0.335818] pnp 00:01: [io 0x00a8-0x00a9]
[ 0.335823] pnp 00:01: [io 0x00ac-0x00ad]
[ 0.335827] pnp 00:01: [io 0x00b0-0x00b5]
[ 0.335832] pnp 00:01: [io 0x00b8-0x00b9]
[ 0.335837] pnp 00:01: [io 0x00bc-0x00bd]
[ 0.335842] pnp 00:01: [io 0x0800-0x080f]
[ 0.335848] pnp 00:01: [io 0x1000-0x107f]
[ 0.335853] pnp 00:01: [io 0x1180-0x11bf]
[ 0.335858] pnp 00:01: [io 0x002e-0x002f]
[ 0.335869] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.335874] pnp 00:01: [io 0xfe00]
[ 0.335879] pnp 00:01: [io 0x0068-0x0077]
[ 0.335884] pnp 00:01: [io 0x0200-0x020f]
[ 0.335889] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.335895] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.335900] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.335906] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[ 0.336082] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.336183] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.336278] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.336373] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.336468] system 00:01: [io 0xfe00] has been reserved
[ 0.336560] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.336656] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.336798] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.336897] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.336996] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.337098] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.337130] pnp 00:02: [io 0x0000-0x000f]
[ 0.337136] pnp 00:02: [io 0x0081-0x008f]
[ 0.337141] pnp 00:02: [io 0x00c0-0x00df]
[ 0.337147] pnp 00:02: [dma 4]
[ 0.337215] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.337242] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.337263] pnp 00:03: [irq 13]
[ 0.337336] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.337431] pnp 00:04: [io 0x0070-0x0071]
[ 0.337445] pnp 00:04: [irq 8]
[ 0.337513] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.338017] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.338032] pnp 00:05: [irq 4]
[ 0.338239] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.338320] pnp 00:06: [io 0x0061]
[ 0.338392] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.338454] pnp 00:07: [mem 0xfed40000-0xfed44fff]
[ 0.338534] pnp 00:07: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[ 0.338562] pnp 00:08: [io 0x0060]
[ 0.338567] pnp 00:08: [io 0x0064]
[ 0.338581] pnp 00:08: [irq 1]
[ 0.338653] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.338686] pnp 00:09: [irq 12]
[ 0.338759] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.339063] pnp 00:0a: [mem 0xff800000-0xffffffff]
[ 0.339151] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.339574] pnp: PnP ACPI: found 11 devices
[ 0.339666] ACPI: ACPI bus type pnp unregistered
[ 0.349216] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40000000-0x400fffff]
[ 0.349328] pci 0000:00:1b.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit]
[ 0.349464] pci 0000:00:1b.0: BAR 0: set to [mem 0x40100000-0x40103fff 64bit] (PCI address [0x40100000-0x40103fff])
[ 0.349606] pci 0000:00:1d.7: BAR 0: assigned [mem 0x40104000-0x401043ff]
[ 0.349710] pci 0000:00:1d.7: BAR 0: set to [mem 0x40104000-0x401043ff] (PCI address [0x40104000-0x401043ff])
[ 0.349849] pci 0000:00:1f.2: BAR 5: assigned [mem 0x40104400-0x401047ff]
[ 0.349950] pci 0000:00:1f.2: BAR 5: set to [mem 0x40104400-0x401047ff] (PCI address [0x40104400-0x401047ff])
[ 0.350115] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.350248] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[ 0.350352] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.350483] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.350580] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.350673] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.350773] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.350874] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.351009] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0540000-0xf055ffff pref]
[ 0.351133] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.351225] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.351324] pci 0000:00:1c.1: bridge window [mem 0x40000000-0x400fffff]
[ 0.351425] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.351558] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.351649] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.351749] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.351850] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.351981] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
[ 0.352070] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.352164] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.352258] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.352370] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.352482] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.352586] pci 0000:00:1c.0: setting latency timer to 64
[ 0.352607] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.352709] pci 0000:00:1c.1: setting latency timer to 64
[ 0.352728] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.352830] pci 0000:00:1c.2: setting latency timer to 64
[ 0.352844] pci 0000:00:1e.0: setting latency timer to 64
[ 0.352853] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.352859] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352865] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352871] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352877] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352883] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.352890] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.352896] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.352902] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.352908] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.352914] pci_bus 0000:02: resource 1 [mem 0x40400000-0x405fffff]
[ 0.352921] pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.352927] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.352933] pci_bus 0000:03: resource 1 [mem 0x40000000-0x400fffff]
[ 0.352940] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.352946] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.352952] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.352959] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.352966] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.352972] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352978] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352984] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352990] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352996] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.353002] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.353009] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.353015] pci_bus 0000:11: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.353230] NET: Registered protocol family 2
[ 0.353666] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.354759] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.356562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.357461] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.357565] TCP reno registered
[ 0.357677] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.357790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.358526] NET: Registered protocol family 1
[ 0.358655] pci 0000:00:02.0: Boot video device
[ 0.358843] PCI: CLS 32 bytes, default 64
[ 0.358970] Unpacking initramfs...
[ 0.422600] Freeing initrd memory: 1980k freed
[ 0.424221] Simple Boot Flag at 0x36 set to 0x1
[ 0.425202] audit: initializing netlink socket (disabled)
[ 0.425328] type=2000 audit(1312465475.423:1): initialized
[ 0.426137] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.431274] VFS: Disk quotas dquot_6.5.2
[ 0.431768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.432308] msgmni has been set to 1979
[ 0.433016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.433243] io scheduler noop registered
[ 0.433398] io scheduler deadline registered
[ 0.433626] io scheduler cfq registered (default)
[ 0.433955] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.434029] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.434158] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.434222] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.434347] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.434410] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.434777] intel_idle: MWAIT substates: 0x20220
[ 0.434799] intel_idle: v0.4 model 0x1C
[ 0.434803] intel_idle: lapic_timer_reliable_states 0x2
[ 0.434847] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.435010] ERST: Table is not found!
[ 0.435250] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.456560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.674724] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.727052] Linux agpgart interface v0.103
[ 0.727338] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.731303] i8042: Detected active multiplexing controller, rev 1.1
[ 0.734370] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.734541] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.734705] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.734863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.735024] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.735354] mousedev: PS/2 mouse device common for all mice
[ 0.753576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.753717] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.753983] cpuidle: using governor ladder
[ 0.754335] cpuidle: using governor menu
[ 0.754959] TCP cubic registered
[ 0.755047] NET: Registered protocol family 17
[ 0.755152] Registering the dns_resolver key type
[ 0.755524] PM: Hibernation image not present or could not be loaded.
[ 0.755541] registered taskstats version 1
[ 0.756395] rtc_cmos 00:04: setting system clock to 2011-08-04 13:44:36 UTC (1312465476)
[ 0.756612] Initializing network drop monitor service
[ 0.760092] Freeing unused kernel memory: 712k freed
[ 0.760552] Write protecting the kernel read-only data: 6144k
[ 0.761521] Freeing unused kernel memory: 60k freed
[ 0.768916] Freeing unused kernel memory: 784k freed
[ 0.773948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.824947] udevd[74]: starting version 173
[ 0.877923] SCSI subsystem initialized
[ 0.935196] libata version 3.00 loaded.
[ 0.956774] ahci 0000:00:1f.2: version 3.0
[ 0.956824] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.957043] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.957186] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.957352] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.957485] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.964648] scsi0 : ahci
[ 0.965831] scsi1 : ahci
[ 0.966239] scsi2 : ahci
[ 0.966607] scsi3 : ahci
[ 0.967366] ata1: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104500 irq 43
[ 0.967524] ata2: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104580 irq 43
[ 0.967680] ata3: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104600 irq 43
[ 0.967831] ata4: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104680 irq 43
[ 1.286817] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.286986] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.287140] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.287285] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.296743] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
[ 1.296845] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.306650] ata1.00: configured for UDMA/133
[ 1.307168] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
[ 1.361599] usbcore: registered new interface driver usbfs
[ 1.361788] usbcore: registered new interface driver hub
[ 1.362029] usbcore: registered new device driver usb
[ 1.362890] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.363254] sd 0:0:0:0: [sda] Write Protect is off
[ 1.363390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.363491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.371359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.371567] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.371722] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.371734] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.371971] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.393443] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.393567] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.397557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.397596] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40104000
[ 1.410069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.410565] hub 1-0:1.0: USB hub found
[ 1.410687] hub 1-0:1.0: 8 ports detected
[ 1.418573] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.420139] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.436350] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.436604] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.436912] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.436925] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.437083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.450137] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.450657] hub 2-0:1.0: USB hub found
[ 1.450776] hub 2-0:1.0: 2 ports detected
[ 1.451206] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.451346] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.451358] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.451506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.466851] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.467375] hub 3-0:1.0: USB hub found
[ 1.467491] hub 3-0:1.0: 2 ports detected
[ 1.467949] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.468100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.468111] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.468263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.476847] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.477389] hub 4-0:1.0: USB hub found
[ 1.477506] hub 4-0:1.0: 2 ports detected
[ 1.477926] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.478068] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.478080] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.478233] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.486815] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.487337] hub 5-0:1.0: USB hub found
[ 1.487454] hub 5-0:1.0: 2 ports detected
[ 1.720183] usb 1-4: new high speed USB device number 2 using ehci_hcd
[ 2.310090] usb 1-7: new high speed USB device number 3 using ehci_hcd
[ 3.346515] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.346624] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.481722] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 3.481844] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572970
[ 3.481970] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572968
[ 3.482041] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 923116
[ 3.482090] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572948
[ 3.482130] EXT4-fs (sda2): 4 orphan inodes deleted
[ 3.482225] EXT4-fs (sda2): recovery complete
[ 4.287281] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.547177] udevd[278]: starting version 173
[ 5.875278] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.875984] ACPI: AC Adapter [AC0] (off-line)
[ 5.881017] ACPI: acpi_idle yielding to intel_idle
[ 5.888339] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1
[ 5.939985] ACPI: Lid Switch [LID]
[ 5.940983] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2
[ 5.941147] ACPI: Power Button [PWRB]
[ 5.941583] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.941763] ACPI: Sleep Button [SLPB]
[ 5.942546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.942697] ACPI: Power Button [PWRF]
[ 5.943413] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.943529] ACPI: Thermal Zone [TZ01] (24 C)
[ 5.972400] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.972588] ACPI: Battery Slot [BAT1] (battery present)
[ 5.995124] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 5.995453] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 5.995846] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 5.999895] iTCO_vendor_support: vendor-support=0
[ 6.012373] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 6.124751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.125083] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
[ 6.125348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.190412] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.194157] tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 6.215082] Initializing USB Mass Storage driver...
[ 6.215469] usbcore: registered new interface driver usb-storage
[ 6.215586] USB Mass Storage support registered.
[ 6.267697] usb 1-7: USB disconnect, device number 3
[ 6.269402] Linux media interface: v0.10
[ 6.271745] scsi4 : usb-storage 1-7:1.0
[ 6.278594] usbcore: registered new interface driver ums-realtek
[ 6.324583] usbcore: registered new interface driver uas
[ 6.361274] Linux video capture interface: v2.00
[ 6.416800] uvcvideo: Found UVC 1.00 device USB Camera (5986:02a8)
[ 6.435626] input: USB Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
[ 6.435979] usbcore: registered new interface driver uvcvideo
[ 6.436094] USB Video Class driver (v1.0.0)
[ 6.516768] [drm] Initialized drm 1.1.0 20060810
[ 6.632026] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.657529] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.657663] i915 0000:00:02.0: setting latency timer to 64
[ 6.729787] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.729799] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.729904] [drm] Driver supports precise vblank timestamp query.
[ 6.805456] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.805960] [drm] initialized overlay support
[ 6.965295] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 7.013599] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 7.142190] fbcon: inteldrmfb (fb0) is primary device
[ 7.190534] Console: switching to colour frame buffer device 128x37
[ 7.197352] fb0: inteldrmfb frame buffer device
[ 7.197461] drm: registered panic notifier
[ 7.197660] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110316/video-1148)
[ 7.198144] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.198602] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 7.199927] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.736636] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.833668] EXT3-fs: barriers not enabled
[ 8.856596] kjournald starting. Commit interval 5 seconds
[ 8.859646] EXT3-fs (sda4): using internal journal
[ 8.862624] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 9.026943] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k
[ 18.281512] NET: Registered protocol family 10
[ 21.591928] EXT4-fs (sda2): re-mounted. Opts: commit=600
[ 35.750474] fuse init (API version 7.16)
[ 201.029607] PPP generic driver version 2.4.2
[ 3255.955029] EXT4-fs (sda2): re-mounted. Opts: commit=0
[10041.892469] usb 1-1: new high speed USB device number 4 using ehci_hcd
[10042.021338] scsi5 : usb-storage 1-1:1.0
[10043.026686] scsi 5:0:0:0: Direct-Access TOSHIBA MK1234GSX PQ: 0 ANSI: 2
[10043.031863] sd 5:0:0:0: Attached scsi generic sg1 type 0
[10043.036190] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[10043.041825] sd 5:0:0:0: [sdb] Write Protect is off
[10043.045147] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[10043.045157] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.052676] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.064806] sdb: sdb1
[10043.071939] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.075091] sd 5:0:0:0: [sdb] Attached SCSI disk
[10089.898154] EXT3-fs (sdb): error: can't find ext3 filesystem on dev sdb.
[10089.913066] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
[10089.936439] FAT: invalid media value (0xb9)
[10089.939320] VFS: Can't find a valid FAT filesystem on dev sdb.
EDIT: ls -l /etc/modprobe.d
total 16
-rw-r--r-- 1 root root 30 Ago 4 04:57 blacklist_net.conf
-rw-r--r-- 1 root root 182 Ago 4 04:57 blacklist_sound.conf
-rw-r--r-- 1 root root 55 Jun 25 15:30 modprobe.conf
-rw-r--r-- 1 root root 196 Abr 8 11:08 usb-load-ehci-first.conf
Thanks in advance for any help.
Last edited by JohnTH (2011-08-04 16:31:18)The kernel outputs many error messages when I start NetwrokManager, and persists even when I stop it
Here is part of a dmesg:
[ 587.134444] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 587.135365] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 587.136337] HW_VAR_MRC: Turn on 1T1R MRC!
[ 587.553458] pwrdown, 0x6(BIT6)=f1
[ 589.566485] pwrdown, 0x6(BIT6)=f1
[ 591.573163] pwrdown, 0x6(BIT6)=f1
[ 593.579828] pwrdown, 0x6(BIT6)=f1
[ 595.586517] pwrdown, 0x6(BIT6)=f1
[ 597.593183] pwrdown, 0x6(BIT6)=f1
[ 599.599777] pwrdown, 0x6(BIT6)=f1
[ 601.606490] pwrdown, 0x6(BIT6)=f1
[ 603.613185] pwrdown, 0x6(BIT6)=f1
[ 605.619843] pwrdown, 0x6(BIT6)=f1
[ 607.626506] pwrdown, 0x6(BIT6)=f1
[ 609.633150] pwrdown, 0x6(BIT6)=f1
[ 611.639785] pwrdown, 0x6(BIT6)=f1
[ 613.646491] pwrdown, 0x6(BIT6)=f1
[ 615.653171] pwrdown, 0x6(BIT6)=f1
[ 617.659839] pwrdown, 0x6(BIT6)=f1
[ 619.666513] pwrdown, 0x6(BIT6)=f1
[ 621.673175] pwrdown, 0x6(BIT6)=f1
[ 623.679774] pwrdown, 0x6(BIT6)=f1
[ 625.686507] pwrdown, 0x6(BIT6)=f1
[ 627.693176] pwrdown, 0x6(BIT6)=f1
[ 629.699826] pwrdown, 0x6(BIT6)=f1
[ 631.706480] pwrdown, 0x6(BIT6)=f1
[ 633.713169] pwrdown, 0x6(BIT6)=f1
[ 635.719785] pwrdown, 0x6(BIT6)=f1
[ 637.726499] pwrdown, 0x6(BIT6)=f1
[ 639.733146] pwrdown, 0x6(BIT6)=f1
[ 641.739824] pwrdown, 0x6(BIT6)=f1
[ 643.746489] pwrdown, 0x6(BIT6)=f1
[ 645.753149] pwrdown, 0x6(BIT6)=f1
[ 647.010241] pwrdown, 0x6(BIT6)=f1
[ 647.135295] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 647.136216] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 647.137240] HW_VAR_MRC: Turn on 1T1R MRC!
[ 647.753447] pwrdown, 0x6(BIT6)=f1
[ 649.766491] pwrdown, 0x6(BIT6)=f1
[ 651.773160] pwrdown, 0x6(BIT6)=f1
[ 653.779830] pwrdown, 0x6(BIT6)=f1
Can somebody help me? -
Windows VPN clients can't use network servers after 10.5.1 upgrade
We have two Xserves, both formerly running 10.4.11. One is the OD master, the other a replica. The replica is also the VPN server, and is a DHCP server for the small number of IP addresses reserved for VPN clients.
The OD master upgrade went fine. I completely reinstalled the OD replica, set the replica up again, and set up the VPN server. It supports L2TP/IPsec connections only.
After the upgrade, Mac users running Tiger or Leopard can connect to the VPN server and connect to network services without any problems. Windows users can connect, but cannot actually USE anything on my office network. For example, if you try to connect to a web server either by fully qualified domain name or by hostname, the connection from the browser simply times out.
In the Windows command line I can verify that I have an active connection by pinging and using the tracert command (equivalent of traceroute on UNIX). Hostname resolution works, too. But nothing happens when you try to open a web browser, which is mostly what my users need to do.
It doesn't matter whether you're logging in with an OD user account or a local account defined solely on the VPN server. Same behavior in Windows.
I had to take an older XServe running 10.4.11 out of our data center, move it to the office, and set it up on the same external network connection. 10.4.11 server works, 10.5.1 doesn't, from the same Windows client, set up exactly the same way.
I've been through the hoops with Apple Enterprise support, who now tell me that Engineering kicked it back to them and told them they'd charge me $695 to get it fixed, because it's ostensibly custom configuration work. If that's true, why is Windows XP listed under L2TP/IPSec support on page 127 of the Leopard Network Services Admin guide? I don't want a custom fix, I just want it to work the way it's supposed to work. Or I want Apple to retract the claim that OS X Server is the best workgroup server solution for Macs and Windows.
Anyone else encounter this problem or know of a fix?Had the same problems, started after i tried out the firewall in Leopard server.
Seems that not all settings are reset even after turning the firewall off.
To reset the firewall to its default setting:
1 Disconnect the server from the Internet.
2 Restart the server in single-user mode by holding down the Command-s keys during
startup.
3 Remove or rename the address groups file found at /etc/ipfilter/
ipaddressgroups.plist.
4 Remove or rename the ipfw configuration file found at /etc/ipfilter/ipfw.conf.
5 Force-flush the firewall rules by entering the following in Terminal:
$ ipfw -f flush
6 Edit the /etc/hostconfig file and set IPFILTER=-YES-.
7 Complete the startup sequence in the login window by entering exit:
The computer starts up with the default firewall rules and firewall enabled. Use Server
Admin to refine the firewall configuration.
8 Log in to your server’s local administrator account to confirm that the firewall is
restored to its default configuration.
9 Reconnect your host to the Internet.
This solved the problem for me... -
How configure reporting services configuration with sql server business development studio
I have installed sql server 2008 r2 mixed mode(sql server authentication) with native mode
I want to run report using reporting services config manager.
I made report in ssrs and I have configured reporting services configuration and web url from RSCM( reporting services config manager), i put on ssrs report.
report is build and deployed but when i take deployed url on Internet explorer, it shows the window below:
when I put the password nothing happened . if I put url in google chrome then it shows authentication required window like the same in IE
if I passed username=(levent/sa) and password then goes on window but does not see on page, if I passed only administrator name (levent) not passed sql server login name (sa) then does not close 'Authentication window'
'Computer connect net with modem'
before i tried on earlier PC, it worked fine.
setting is below link like this.
only set service Account is Use_built=NetworkSrvice
link
http://www.azurecurve.co.uk/2012/02/how-to-configure-sql-server-reporting-services-in-order-to-deploy-reporting-services-reports-in-gp/
what is the problem
Plz give suggestion quicklyHi tusharshinde,
Per my understanding that when you log in the report Manager you got the pop-up window ask for credential, you try to enter the SA account and the window account as the username and password but both not work, right?
Your issue related to the authentication. As you mentioned you have choose the ”Network Service” as the Service account, generally using this account in RSCM and RSWindowsNegotiate is added to the RSReportServer.config file as the default setting. With this
setting, the report server can accept requests from client applications requesting Kerberos or NTLM authentication. If Kerberos is requested and the authentication fails, the report server switches to NTLM authentication and prompts the user for credentials
unless the network is configured to manage authentication transparently.
The issue can be caused by many factors and please check one by one.
Did you enter the username and password for three times and got blank page or got some error? If you got some error, please provide the error information.
you can delete the specific Authorization Types inside rsreportserver.config file, open path:” \Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config”.
Search the file for the “AuthenticationTypes” section. Remove RSWindowsNegotiate and RSWindoeBasic to ensure only “RSWindowsNTLM” is specified in the file rsreportserver.config file.
Before do any modification, back up the files and remember to restart the ReportServer instance in the RSCM after the modification.
If step1 doesn’t work ,please also do the trusted Site Setting in the Browser, article with details steps for your reference:
http://technet.microsoft.com/en-us/library/bb630430.aspx
Please check the Report Manager's authentication mode.Have a look in the Report Manager's web.config file to check if you can find below information under the <system.web> (Path is “C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportManager\Web.config ” ).
authentication mode="Windows"
identity impersonate="True"
Similar threads for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/23c5daa0-3232-4e8c-89c9-4526960c9d14/ssrs-2008-credentials-login-prompt?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0778e2ca-0fb1-4b5c-996c-6e327b5e1473/user-logon-credentials-for-ssrs-web-server-setup?forum=sqlreportingservices
Please tried to provide us more details information, if the problem still exists:
Did you login in the report manager locally or remotely via Browser and which URL you are using to login the Report manager?
Did you modified some configuration file before and what did you modified?
Did your windows account have the right permission to access the report manager?
Any problem, please feel free to ask.
Regards
Vicky Liu
Maybe you are looking for
-
Remote app and home sharing problems
Hi I have suddenly a problem with my home sharing Yesterday it all worked fine On my both devices iphone and ipad, i cant connect anymore to itunes on my mac mini Itunes home sharing is on Ipad and iphone it is too I tried several times turning it of
-
UI Dynamic Tabs Shell - Child Taskflow not rendering / instantiated
Hi All, I have had this problem, ever since rebuilding my application using Jdev 11.1.2, although I am not convinced this is a problem with Jdveloper verison. Basically, I have developed the UI to open new task flows as dynamic tabs, making use of th
-
Problem Creating a HTTP Service in SOAMANAGER
Hi all, I am having difficulty in setting up a HTTP Service in SOAMANAGER. I have generated the Enterprise Service - Service Definition Succesfully in SAP from a RFC Enabled Function Group( this is working fine). I then go into SOAMANAGER -> Single S
-
Remote filepath for Server Audit specification
Hi, I am trying to create a Server Specification with the filepath as a remote share as below but keep in getting the error message ' The audit log file path is invalid'. CREATE SERVER AUDIT MarketDevLogToFile TO FILE ( FILEPATH ='\\10.1.1.1\Au
-
Face Time sometimes doesn't connect
I am trying to perform a test connect to facetime using my iphone 4 and ipad 2. The two devices would not connect, however, when I tried to place a face time call simultaneously on both devices calling each other at the same time, it will successfull