Re: Constant EAS Messages

Why is EAS alert now triggering ever 45-60 seconds??? Weather service put out a flash flood alert an hour ago, and since then COMCAST is broadcasting the blank screen and siren EVERY 45-60 seconds (no information is displayed. The flood alert goes for another two hours!!

Hi SouthHuntsville, I have sent a refresh signal to the box. Please retest and let me know if you are still having the issue.
Thank you

Similar Messages

I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.

I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.
I am using Windows 8.

Hi,
Which version of Photoshop Elements are you trying to install?
Are you installing from DVD or a download?
If DVD, make sure you are using the Windows one, not the MAC one.
What device are you trying to install on?
Does your system meet the required spec?
Are you on Windows 8 or Windows 8.1?
Brian

I am unable to install the latest update to iTunes, I get constant error messages, even when I attempt to uninstall iTunes completely and start afresh, iTunes is still listed in my program files on my hard drive and the shortcut is still on my desktop!?

Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing

Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

Please see the subject line thanks
I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

If you were told they would refund the price for the iCloud storage - Contact AppleCare and ask to speak with a senior advisor. Have the case number for the promised refund available.
If you are trying to update your device, but you don't have sufficient space to download and install the update, you need to delete content from your device. Buying storage in iCloud does not add space to the device which is what you need.
You can always update using a computer with iTunes installed - this method is faster, and will allow you to make a backup on the local computer (Local backups restore faster than iCloud backups).
HTH

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

PACE is a rather crappy copy protection software used by the following;
Antares
Melodyne
Cycling 74 Max/MSP/Jitter
iZotope oZone
Line6 POD Farm
McDSP plug-ins (some software purchases include a green iLok key)
MOTU
Overloud
Pro Tools
Serato
Virtually all Digidesign (RTAS and TDM) plug-ins
Virtually all Waves Products
So if you have any of there, they might be the cause of your problems.
Allan

I cannot send docs via email constant error message.

Whenever I try to send a document via email i get a constant error message. Any ideas?

Very difficult to help when you don't provide any information.

MAC OSX 10.4.11 I finally succumbed to the constant irritating messages telling me that I didn't have the latest version. My old version and all my bookmarks have been deleted my Mac says it doesn't support Firefox! How can I recuperate my old settings?

MAC OSX 10.4.11 I succumbed to the constant messages telling me that I didn't have the latest version, despite being happy with the one I had. My old version and all my bookmarks have been deleted and now my Mac says it doesn't support Firefox!!!!! How can I recuperate my old settings? in English

Firefox 4 versions and later '''do not run on a PowerPC Mac''' (like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
The latest supported version for your os is '''3.6.27''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
1. Download a 3.6.27 copy of the Firefox from the above link
2. Trash the current Firefox application to do a clean (re-)install.
3. Install the new version that you have downloaded(3.6.27)
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so probably you won't lose your bookmarks or other personal data, if you don't already ''totally'' uninstall firefox(user data and settings like bookmarks, extensions, etc. located here: ~Library/Application Support/Firefox so you must uninstall it separately, to totally uninstall firefox).
see also : [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Sender Missing on Several EAS Messages on Palm Pre

On about 10% (not sure exact ratio) of the messages I get on my Palm Pre from our Zimbra server via EAS are missing the sender on the Palm. I never had this issue on my previous phone: Treo 750 running Win Mob 6.1.
With the "From" field apparently missing on these messages, I can't reply to them and, unless the person includes their name or details in a signature block, there is no way I can find to tell who sent the message.
I have not seen this reported elsewhere. Is this one of the known EAS issues?
Thanks,
Colin
Post relates to: Pre p100eww (Sprint)

Hello Barrybks,
The problem here is nothing on your end. It's actually a problem with the way the headers are set up for the Exchange server. You will have to get a member of tech support from your workplace to fix this error, but it isn't a difficult one to fix.
This information was posted by user [email protected] at www.webservertalk.com.
For the instructions I will assume your workplace is using Microsoft Exchange Server 2003:
1. Go to properties of Default Web Site
2. Under Web Site, click on Advanced of the IP Address
3. Highlight the IP address and select Edit
4. Remove anything you can see in there.

Illustrator CS6 Constant Error Messages

Hi guys,
I purchased CS6 about 5 months ago now. And for the last 3 months I have been getting constant Error 16 messages when trying to start up the program. It has become a vicious cycle of uninstalling, deleting all my adobe products, then deleting all of my adobe file folders under the C: drive, App data folders, and my User folders, then having to reinstall everything. I have been doing this consistently for 3 months and it's getting to the point of seriously disabling my workflow and costing my business way to much time. I even now today had a new problem arise. When I reinstall Illustrator and enter my serial number during the installation process it accepts it and installs fine. But when I open up Illustrator it prompts me that my trial has expired and to enter in a serial number. So I enter in my serial number again and then it works for a bit. If I close the program and reopen it literally 5 minutes later it Error 16 again.
I'm running a Dell Inspiron 15R Intel i-7 processor, 8GB RAM and Windows 8. Does anybody have any ideas on why Illustrator continues to crash and/or Error 16 almost every other day/week?
Thanks.
Here is the Error:16 message
Besides the Error 16 message I am also still having trouble with the Activation and serial number recognition of Illustrator. I went to open Illustrator up today and I got this message:
It says "Activation Failed". The message is saying Product Activation is required to use this product. You must have a working internet connection to activate this product. I have full strength internet connection and I have already activated Illustrator when I did a fresh install on 12/12/13. First is was the Error:16, then it was the trial problem, and now This. What is going on?
My serial number is clearly validated and activated but the very next day I try to open Illustrator I get the message in the screenshot above. How can I fix this? Thanks.

Jeff A Wright,
Thank you for your support on this. However, I am running into some problems for completing the steps listed on the help page you listed. In the SLStore the deselection of "Read-Only" is not being applied. I deselect that attribute and click Apply and then Ok. If I right click again on the folder the "Read-Only" attribute is still checked.
Also for step 3 Set Permissions I cannot change any of the permissions for the SLStore even though I am logged in as the Administrator. The PCD folder does not have an Owner tab and I cannot change the permissions for this folder either.
What can I do to fix the file permissions if I am having the problems above?
Thank you.

Constant Error Messages with Purchasing & Downloading on iTunes with iOS 7

This is getting ridiculous. Ever since I downloaded iOS 7 when it first came out, I've had difficulties making purchases and downloading content wirelessly using iTunes on my iPhone 4S and iPad 2. Every time I tap "Buy" I get a message that says the "Content Cannot Be Purchased At This Time." I then have to close iTunes completely (double-tapping the HOME button and swiping up on the iTunes window), then re-launch iTunes, find the content again and re-hit Buy and then I finally get the button to Download Now and Download Later. Choosing Download Now, I get another error message saying "Content Cannot Be Downloaded At This Time," and I have to do the whole shut down/re-start process all over again to finally have the download start. This happens when I attempt purchases using 3G and on wifi (and I've tried several different wifi networks and I get this error all the time).
I never used ot have problems like this on my 4S or iPad 2 before iOS 7. I tried restoring to factory settings and then moving all the content manually back from the iCloud and my computer and I still get the error. I tried signing out of my AppleID and logging back in, still get the error. I downloaded the latest iOS 7 software (currently running 7.0.4) and I STILL GET THE BLOODY ERROR. Calling AppleCare, they have no freaking clue why I'm getting this error and neither do the Genius Bar people.
There doesn't seem to be anybody else (that I can find online) who has the same problem. But there also doesn't seem to be anybody at Apple looking in to this which is incredibly frusturating. I've been submitting Bug Reports to the Apple Feedback pages for over a year now and still no acknowledgment from Apple. I also have been having the issue where my iPhone/iPad iCal apps keep reversing my Alert preferences (which I've noticed people complaining about for over 3 years with no solution from Apple).
This is getting out of hand. I've been a loyal Apple customer for the better part of a decade. I switched to Apple over PC because of their committment to excellence and relatively lack of bugs in their software. But lately, Apple's quality has suffered tremendously. When there are iOS software glitches that continue after 3 major updates (and several minor ones), clearly Apple engineers don't give a crap about their customers or the user experience. If these issues aren't addressed, I'm seriously going to take my business elsewhere. There is simply no excuse.

You won't see Viber data in www.icloud.com. App data (e.g. Viber) is included in an iCloud backup or iTunes backup which includes other information. Kindly see this support article for more information - http://support.apple.com/kb/HT1766, https://support.apple.com/kb/ht4946 and http://support.apple.com/kb/PH12519.

PSE 8 constant error message

Just got a brand new iMac and finally able to install PSE 8. I am constantly getting this error message: "This is not a valid Portable Document File (PDF) document. It cannot be opened."
I get it when I first launch PSE and haven't even opened anything yet, and when I do open a file, I get this message constantly all the while I am editing away at it. It doesn't prevent me opening the file or using PSE as normal, but this message is constantly popping up and is very annoying.

Hello doovy69,
Thanks for using Apple Support Communities.
To troubleshoot the error message that the cable or accessory may not be compatible, please follow the steps outlined below.
If you see an alert
When you plug in your device, you might see one of these alerts:
“This cable or accessory is not certified and may not work reliably with this iPhone.”
“This accessory is not supported by this device.”
If you see one of these alerts, unplug your device try and these steps:
Look at the connector at the bottom of your device and make sure it’s free of debris, then reconnect the USB cable.
If you still see an alert, try a different USB cable or charger.
Get more help
If your device still doesn't charge or you still see an alert after trying the steps above, contact Apple Support.
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

"Cannot Find Server" Constant Error Message

I've been having this problem for quite some time. I will attempt to connect to a website only to wait forever and then get a "Cannot find server" error message. It's not just with one site, it happens with many.
It's also random. Sometimes everything connects fine and fast, and then inexplicably I get "Cant' find server" for sites like Facebook, Amazon, even Apple. It can start working again for a few minutes and then in an instant I'm getting error messages again.
However, my email always works fine.
And this is NOT a Safari problem. I also get the same trouble when I switch to Firefox or Explorer. My ISP says it's an Airport / Mac issue since it all works fine if I direct connect to the laptop and because my email is also working.
In addition, when I'm having this problem, my iPhone also cannot connect to the WWW but can get email.
I've tried powercycling the modem and the airport numerous times. It's really becoming a pain.
Any thoughts?

Me too I tried everything. I am an Apple fan with 2 computers,3 iPods. I have no idea what the problem is. I had to re-run the disk each time to find the internet. Finally tried a Linksys Grouter worked first time-laptop anywhere in the house strong signal. I have had similar problems with an Airport Express-never got it to work-so tried the Extreme. I returned it-I didn't want to but I just could not get it to work.

Constant error message when trying to download iOS 5.1

Every time I go to download ios 5.1 on my iphone 4 (ios 5.0.1) I get the following error message: "Software update failed. An error occurred downloading ios 5.1." Any suggestions?

I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html

I have an HP Laserjet Pro 200 Color MFP Getting constant error message: service error 79

The product name listed on back of the machine is : CF145A. I keep getting an error message " 79 Service error Turn off and Back On. I have turned it off and on several times but the error message will not go away and will not let me perform any functions.

Hi,
Try connecting the printer to your PC with a USB, then install the latest firmware using the following tool:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-6&cc=us&dlc=en&lc=en...
It should address a such and may resolve the described problem:
•Fixed a 79 error when printing certain documents.
If he printer stuck in such an error state, I would also suggest unplugging any cable form the printer first (such as a USB, Ethernet, Phone Cable, etc.). Then turn the printer off and turn it back on and check if the same error appear.
Also ensure the printer is directly connected to a wall socket and not through any power splitters, extensions or a surge protector and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I was forced into an update and now i get constant error messages and crashes I'm missing folders and it doesn't work the same way twice.

Last week I had a pop up that said I had an update from Thunderbird. It wouldn't take no for an answer and went ahead and did the update. It updated to 12.0.1 which from what I can see is already outdated. Since it did its update it hasn't worked right and I keep getting messages of long running scripts. I have messages running in tabs across the top that I can't get rid of. It takes extra steps to get back to the inbox. I also lost 2 of my folders. I' ran AVG scan and maintenance. Malwarebytes found 2 problems that it quarantined but didn't seem to be associated with T/bird. One folder came back after that. I have another folder that is labeled NSTMP that shows 518MB of use but when I open it there is nothing there. I'm not sure if I picked up something in the last update or not. It seems it tried to do this before and I told it never to update. At this point should I just update to the latest program and see what happens? I can't seem to find a way to transfer all of the folders to a thumb drive without going one message at a time and I'd at least like to back it up. Any thoughts/ideas appreciated. Thanks Doug T

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Re: Constant EAS Messages

Similar Messages

Maybe you are looking for