RE: ControllingPeriods in Distribution and ascessment cycle
Hi,
When i am creating the cycle canteen
cycle period start date shall imention date 01.05.2009.
When i am running the Distribution cycle Error
start on reading date31.03.2009.only ended on the 31.05.2009
System Response:01.01.2009 canot to be processed.
Hi Rao,
If you are running this cycle before the start date in distribution cycle, then it is not possible because start date in not editable in KSV2. If you are running after date in cycle then end date can be extended in KSV2.
Similar Messages
-
Distribution and Assessment Cycles
Could anyone tell me the difference between distribution and assessment cycles?
hi,
in distribution the original primary costs are sent from the sender to the receiver. thus the original costs can be seen in the receiving cost centre.
in assessment the primary costs are assigned to a secondary cost element in an Allocation structure and the secondary cost elements are seen in the receiving cost centre
assign points if useful.
regards -
Difference between Distribution and Assessment cycle
Hi,
Can any one help me regarding the above(Difference between Distribution and Assessment cycle)
Thanks in advance
RajaniHI,
Assessment:
Assessment was created to transfer primary and secondary costs from a sender cost center to receiving controlling objects. During assessment, cost centers or business processes can be used as senders .n The receivers for an assessment can be a cost center, WBS element, internal order, cost object, or a
business process. You can restrict the number of receiver categories in customizing. n Primary and secondary postings are allocated at the end of the period by means of the user-defined
key.
n During assessment, the original cost elements are summarized into assessment cost elements
(secondary cost element category = 42). As the system writes fewer totals records, the assessment
has a better performance than periodic reposting and distribution.
n Line items are posted for the sender as well as for the receiver, enabling the allocation to be recorded
exactly. The system does not display the original cost elements in the receivers. Therefore,
assessment is useful if the cost drilldown for the receiver is not important, for example, as in the case
of the allocation for the "cafeteria" cost center.
n Similar to distribution, the partner is updated in the totals record during distribution.
n You can reverse assessments as often as required.
n You use the Cycle -Segment method to define sender-receiver relationships.
Distribution:
Differences between periodic reposting and distribution are due to information content and
performance.
n For periodic reposting, no separate credit record is written on the sender for the cost element in the
summary report. Instead, the totals record for the cost element is reduced on the debit side, which
means that the original debit amount can no longer be checked there ("unclean credit"). However,
during distribution, the system writes a totals record for the credit ("clean credit"). The information
on the receiver is the same for periodic reposting and distribution ("clean debit").
n Compared with periodic reposting, during distribution, the system also updates the partner in the
totals record for the sender. This means that the partner can be displayed in the information system
on the totals record level.
n As fewer totals records are written during periodic reposting, performance is better than during
distribution. See customizing for an example with figures that illustrates this aspect. Under utilities,
make settings for the SAPscript text display, then call up the text by choosing Periodic reposting,
Distribution, or Assessment from the menu.
Regards,
Meenakshi -
Actual Distribution and Assesment Cycle
Dear All,
Please let me know how to create distribution and assesment cycle with transport request, please let me know any Snotes need to apply for create in non editable scenariou.Dear All,
Please let me know how to create distribution and assesment cycle without transport request, please let me know any Snotes need to apply for create in non editable scenariou.
please note i want to create cycle in the non editable scenario without transport request.
Regards,
Rama Mohan -
Distribution and Assessment Cycle
Hi,
I am trying to create assessment and distribution cycle in production client. But system is giving me an message that system is not modifiable. The transaction code is S_ALR_87005742 - Define Assessment and S_ALR_87005757 - Define Distribution. Is this a configuration activity?
Please help.
RegardsHi,
Be default, you cannot modify allocation cycles in produtction environment as the settings demand a change request (transport) to be open. However, this could be changed. Please, implement note 326080 for that.
Regards,
Eli -
Hi,
I want to know what is the exact difference between distribution and assessement in CO. What situation we do distribution and assessment.
Regards
BabuHi,
Distribution: Distribution allocates primary costs only.
Example: your company has Admin dept, HR dept and Canteen Dept all are cost center.
At the month end company wants to distribute the costs of canteen to both Admin and HR dept in 40 and 60 % respectively.
If you are talking abt distribution it will allocate primary cost to admin and HR dept.
Example :- Canteen expenses incluedes Rent 1000/-, Power bill 1000/- so the total expenses of canteen will be 2000/- Rs and if i run distribution cycle. System will post 400 as Rent and 400 as electrity in Admin and
600 as rent and 600 as electricity in HR dept.
so when you see the report of Admin you can trance teh cost of rent from canteen and cost of electricy for canteen costs<b>." Here you can trace the costs"</b>
If you use <b>Assessement</b> it will be allocated using the assessement cost element .
once you run assessemnt cycle system will simply post 800 as canteen costs(As assessement cost elemnts). orighinal cost element will lose its identity.
<b>." Here you cannot trace the costs"</b>
Assessement : Assessement allocates primary and sencondary cost elements
Best Regards
Ashish Jain.
Message was edited by:
Ashish Bohara -
Difference between Assesment,Distribution and allocation
HI,
What is the difference between Assesment, Distribution and allocation.
Thanks in Advance,
Regards,
ChanduHi,
1) Allocations: Allocations enable you to periodically allocate amounts and quantities from sender objects to receiver objects. The two main types of allocations are assessment and distribution. You can allocate both plan and actual data. You perform the allocation using the allocation cycle function. You use allocation rules to determine how amounts and quantities should be allocated from sender object to receiver object.
To effect the allocation, you have to make various settings in Customizing. You make the settings in Customizing under Financial Accounting (New) -> General Ledger Accounting (New) -> Periodic Processing -> Allocation.
2) Assessment: A business activity used to allocate quantities and amounts (actual and plan values) from one sender object to one or more receiver objects.
The assessment process posts the sender amounts to an assessment account. The SAP system then allocates the amounts from the assessment account to the receiver(s) - not directly from the original sender account.
The assessment works in the same way as the distribution. However, with the assessment, the debit and credit postings do not occur under the original account or the original cost element but under an assessment account or an assessment cost element. The information of the original account/original cost element are lost.
3) Distribution: A business activity used to allocate quantities and amounts (actual and plan values) from one sender object to one or more receiver objects.
The distribution process distributes the balance(s) from the original sender(s) to the receivers. The original sender account is credited and the original receiver account is debited by the distribution. The debit and credit postings for the distribution occur under the original account/original cost element with which the amounts and quantities are posted at the sender. The information of the original account/original cost element remains intact.
I hope it will help.
If helpful, please assign points.
Regards,
Manju -
HP LaserJet Pro 200 color MFP M276 - new - Device error and Cleaning cycle issues
HP LaserJet Pro 200 color MFP M276 - this is a new printer a friend purchased at Staples. It connects WiFi okay and prints when prompted to but it then does a "Cleaning" cycle after every print job. It also displays "Device Error" at the same time. It has been powercycled as instructed and the error continues to reappear and the "Cleaning" cycle continues as well after each and every print job. My friend paid Staples to set up this printer to a new Acer Laptop and D-Link router he also purchased before he brought them home. He was told everything works fine .. they lied .. Laptop and router have no issues .. just the printer. The Laptop sees the printer okay and software is installed without issue. Any ideas why the "Device Error" and "Cleaning" cycle after every print job is happening? He is on the verge of taking the whole outfit back as Staples has not assisted him and instead directed him to download the manuals from HP. Any suggestions are appreciated
Have you tried a hard reset on it? I know you said you power cycled it, but a hard reset is sometimes different than what some people consider a power cycle.
Follow these steps to perform a hard reset on the printer.
1. Press the Power button to turn on the product.
2. With the product turned on, disconnect the power cord from the rear of the product.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the product.
7. If the product does not turn on by itself, press the power button to turn it on.
Try that out and let me know if it helps.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Hi all,
I need help with my iphone4s.
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
What seems to be the problem here?
thanks and regards
WanWanlucg wrote:
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Imac wont boot, stuck loading, all i see is apple logo and spinning cycle
My 27 inch iMac wont boot, i am runnign snow leopard. I just see the apple sign and the cycle spinning meaning its still loading. I cant use disk utility because leopard install disc wont boot, also i cant run any commands in single user mode, doing /sbin/fsck -fy does nothing, i dont see a # sign or anything, whatever i type it doesnt matter whenever i hit return the cursor just goes to the line below.
dudix wrote:
I cant use disk utility because leopard install disc wont boot
Power down (assume you have already tried the SMC reset) and insert the Applications DVD that came with your new iMac. Boot up while holding the "D" key down (may be best with a wired keyboard) to run the Apple Hardware Test according to these instructions:
http://support.apple.com/kb/HT1509 -
Form Layer 2 to Layer 3 on Distribution and Access
Hi,
Our LAN topology have Core "L3" , Ditribution "L2" and Access "L2". We want to get rid of spanning tree by moving from layer 2 to layer 3 on Access and Distribution layers.
My questions is:
1) Any advice/document on this?
2) in the access switches did I have to configure each interface on 3750 as routed port by issueing "ip routing" and giving an IP address of each port ????. if this is the case than I will need huge amount of IP addresses.
ThanksHi
Much of this has already been covered off.
Just to add, I have implemented both routed access-layer and L2 access-layer and each has advantages and disadvantages.
Major advantages for L3
1) STP contained with wiring closet. Yes you can use RPVST+ but you still are extending L2 links between the distribution and access-layer with all that implies eg broadcast traffic. In addtion to utilise both uplinks at the same time requires a lot of extra configuration ie. setting root bridges for odd and even vlans and matching that to active HSRP gateways etc.
2) Automatic equal cost load-balancing (see previous point )
3) Easier troubleshooting. As previous poster said this is a matter of opinion and i have more experience with switching to be honest but i think troubleshooting L3 routing problems is generally easier than L2 STP problems.
Disadvantages
1) Vlan's cannot be extended across floors. May or may not be a problem for you.
2) If your distribution layer utilises 6500's with service modules eg the Firewall Service Module then layer 2 links give you more flexibility in deployment.
3) Cost can be an issue although your 3750's would support EIGRP stub functionality with only the base image.
As another poster pointed out, STP has come a long way from it's 50 seconds failover and with the correct setup it is nowhere near as important that you try and remove it.
I am just as much in favour of L2 access as L3 and most of major sites utilise L2 from the access-layer but with the speed/performance and cost of L3 switching you can get nowadays using L3 is a viable alternative.
HTH
Jon -
How sales and distribution and customer service are related
Respected,
I am sales and distribution consultant but at present I am working on customer service and sales and distribution simultaneously and I use to face the problems in customer service part of CRM so do they co relate with each other .Hi Avanish,
Please note Customer Service is a combination of Sales & Distribution and Plant Maintenance. the difference in between them, it is that:-
1. Plant Maintenance is being done withing a company / plant, so billing is not get generated.
2. Customer Service is used to external customer, so billing gets done and customers settles the bill.
Thanks & Regards,
Rahul Verulkar -
Grant access to help desk users to add members to distribution and security groups
Hello,
I am trying to create a set of help desk users that has full access to add or remove members from distribution and security groups as well as update users. We want it to bypass owner approval and essentially allow this group to add or remove members
in the FIM Portal and flow it down to ADS.
This obviously works fine if one is a member of the Administrators set, but we want a second tier of power users with limitied rights compared to FIM Admins. We have added the help desk team to the Security Group Users and Group Users set as
well as MPR "Security group management: Users can read selected attributes of group resources".
The help desk users can update users in the Portal with no issue. The can search groups with no issue but when they try to add members to a group they get the error "Access Denied".
Any help is greatly appreciated.
Thanks!I'm having very similar problem - I have users with delegated right to modify group membership only. User can add someone to group and it works fine, but when the same user is trying to remove and user from a group (even if this is the same user
which was added a minute ago) he gets Access Denied:
The
request included members which the requestor is not authorized
to add and/or remove from this group."
It is caused by default MPR:
Group management workflow: Validate requestor on remove member
Question is how this activity validates this request - any insight? -
Hi,
can anybody briefly expalin me the AP and AR cycles individually and tell me when and or where we triggered them in oracle applications.and you can send it to my mail id - [email protected]
thanks in advance.
regards
gb prasadUma:
If you just want to migrate the data from legacy system to SAP, you can use Legacy System Migration Workbench (T-Code LSMW) for data migration.
Links:
http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/frameset.htm
www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
help.sap.com/bp_blv1500/BL_US/html/dataconv_lsmw.htm
Vj -
Material distribution and division wise
hi experts,
I need to take report what are all the items belongs to a particular distribution and division.
regards
arunDear SP ,
You can get sales orders report Material wise through VA05 transaction.
In the VA05 selection screen you enter Sold-to-party ,Material and selection date then click on Further sel,criteria tab (Push button) in the top of the screen ,system will take you to the selection fields there you enter the distribution channels(or Division or any other fields) from and to then execute the report.
System will give the details of the report with that selection fields.
I hope it will help you
Regards
Murali.
Edited by: Murali Mohan.T on Mar 30, 2008 10:17 AM
Edited by: Murali Mohan.T on Mar 30, 2008 10:26 AM
Maybe you are looking for
-
If I set the language on the main Adobe.com page to something other than English, the forum language also changes. I recently set it to French to look for a French helpx article, and some of the French forum content is displayed as garbage: The red-
-
I accidentally deleted Candy Crush off my phone, and when I went to reinstall it, it reinstalled but has now disappeared from my screen. I went to the app store and it says there that it is still installed. How do I get it back?
-
How to edit the records value fetched by select statement query in sqldever
How to edit the records value fetched by select statement query in sqldever 2.1.1. EX- SELECT * FROM emp WHERE ename like 'Jaga%' Edited by: user9372056 on Aug 31, 2010 2:16 AM
-
Is it possible to define a global keyboard shortcut for Exposure Adjustment?
I often find myself having to get out of full-screen mode or having to pull up the Develop or Library module from the hidden right panel just to adjust exposure and nothing else (it is my most common adjustment). Is there some way to globally define
-
Deploy error on primaveraweb.ear during Web Access installation on weblogic
Hi i installed on weblogic 10.3 jdk-6u14-windows P6_70_Web_Access *try to start the all services got this error and failed" <05/05/2010 2:02:32 PM GMT+10:00> <Warning> <HTTP> <BEA-101162> <User defined li stener com.primavera.pvweb.listeners.PVContex