Re-create domain file and site

My domain file is corrupted and not allowing me to publish correctly.
How do I re-create my domain file and site without having to start over again?

Naka! wrote:
My domain file is corrupted and not allowing me to publish correctly.
Are you sure it's corrupted? +"A lot of problems can be solved simply by..."+ Read more in the "Fix iWeb" section here:
http://www.iwebformusicians.com/WebMusic/iWebTips.html
Naka! wrote:
How do I re-create my domain file and site without having to start over again?
Paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html
And although the following Apple doc talks about iWeb '08, I believe it also applies to iWeb '06:
_iWeb ’08: Backing up your Domain file_
There's also this: http://www.shirt-pocket.com/SuperDuper
...which will be invaluable when your Mac's internal HD eventually fails. As someone quipped:
"There are only two types of hard drive: Those that have failed, and those that are about to fail."
...This free SMARTReporter may give you an early warning of impending hard drive failure.

Similar Messages

  • Multiple Domain files, Multiple Sites, Publishing Problems

    I am frustrated beyond belief. I'm an old hand-coder, coming from BBEdit, but I've been using iWeb almost exclusively since its release, because it really is a great product for quick, easy, stylish designs.
    However.... In that year, my collection of sites has grown to 12. Discovering that iWeb becomes a major dog when dealing with that much material, I found and followed the instructions - today - to separate my sites into individual domain files, and edit them individually. iWeb is much snappier and publishing goes much more quickly.
    The problem? Well... after editing, "Publish to .Mac" rarely works. Only "Publish All to .Mac" will get the site online (something about an error with the index.html file). But "Publish All to .Mac", I've just discovered, DELETES the other websites that I have previous published. All day I've been doing updates and publishing my sites, only to discover that the uploads have all been wiped out by the most recent one!
    I'm a big enough fellow to admit that my knowledge isn't total nor perfect - so please, would someone out there with a better handle on iWeb than I (preferably someone who actually deals with multiple domain files rather than someone who thinks they can guess the problem) please clue me into how we make use of this program non-destructively?
    I suppose I could always publish everything to folders and upload it to my iDisk (which itself remains ridiculously slow after how many years now? Sheesh!), but that detracts from the elegance of the .Mac integration, the counter features, - not to mention the little fact that I'm a paying .Mac customer and this darn thing should just work, no?

    Mark:
    I was where you were also. You should give iWebSites a try. It's to iWeb what iPhoto Library Manager is to iPhoto.
    I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
    This lets me edit several sites and only republish the one I want. Just remember to put a copy of your current Domain.sites file somewhere else on your HD in case the splitting gets messed up. It went very smoothly for me and I now manage 19 or so sites.
    Do you Twango?

  • F110 Automatic Payment: Create payment file and create remittance

    Hello,
    I'd like to know the steps to create payment file and remittances in Automatic payment process (F110).
    Thanks in advance

    Hello Emanula,
    payment medium entries are customized in "payment method Country details". You have to decide whether you want to use the PMW or the classical paymentprogram.
    The paymentadvices are generated from the paymentprogram by using the parameters from the CC-data of the paymentmethod - Box "Payment advice control".
    At least: Don't forget to maintain the parameters in f110 "Printout/data medium"
    Hope this gives you a help.
    Best regards
       Horst

  • How can i setup pages to automatically open when double clicked.  Currently when I double click it creates cpgz file and does not open.  The only way to open pages doc is to manually ask to open with pages.

    Currently when I double click it creates cpgz file and does not open.  The only way to open pages doc is to manually ask to open with pages.

    Hi Karen,
    Sounds like OS X has lost the association between Pages and its files.
    Start by quitting Pages, then going to Finder.
    In Finder, locate a .pages file. Click on it (once), then press command-I (eye, not one) to Get Info.
    In the Info window that opens, expand the Open With section.
    In this section, click on the pop-up menu and choose Pages (even if Pages is already shown).
    Click the Change All button to associate all files with the .pages extension with Pages.
    Close the info window.
    Double click any .pages file to check that Pages will now launch and open the file.
    Regards,
    Barry

  • Cannot create PS file and PDF in Framemaker 9

    I'm using Version 9.0p196.
    When I used the "Advanced Save" to save an .fm file to a pdf, I got the message "The specified printer 'N/A' cannot be found, use printer 'Adobe PDF' instead. After I click OK, it said "cannot create PS file", and "failed to create PDF file.
    It worked fine before.This problem was occurred after I copied some fonts to the following locations:
    C:\Windows\Fonts
    and
    C:\Program Files\Adobe\FrameMaker9\fminit\fonts\adobe
    Those fonts are:
    timesbd.ttf
    times.ttf
    HelveticaWorld-Regular.ttf
    HelveticaWorld-Italic.ttf
    HelveticaWorld-BoldItalic.ttf
    HelveticaWorld-Bold.ttf
    I have no idea if that's the cause of the problem. Does anyone know?
    By the way, the FM 9 is running on XP.
    Thanks,
    Meggie

    Meggie,
    You may or may not have created a mess with fonts. I would try not to have duplicate fonts, it is totally sufficient to have them in C:\Windows\Fonts.
    But your FrameMaker verson is definitely four (4) patches behind. The current version is 9.0.4 (9.0p255) and you can get the updaters here:
    http://www.adobe.com/support/downloads/product.jsp?product=22&platform=Windows
    You have to install them one after another.
    Some of the patches improved the Save as PDF feature.
    For further communication, please add your OS version and Acrobat version.
    - Michael

  • Combine functionality Batch Create Multiple files and Set Security

    Greetings,
    Is there any way to combine the functionality of Acrobat Pro’s “Batch Create Multiple Files” (File (drop down) -> Create PDF -> Batch Create Multiple Files…) and running a batch process (Advanced -> Document Processing -> Batch Processing -> Batch Sequences -> Set Security)?
    Ideally I’d like to either:
    1)      Add the “Set Security” batch process to the “Batch Create Multiple Files … command located under the File (drop down) -> Create PDF
    or
    2)      Be able to create a batch process that first allows me to select the documents (Word, Excel, etc.) I want to convert into PDF files, then converts them, then runs the Set Security batch process.
    Right now it isn’t too much trouble to first “Create Multiple Files…” then run the batch process Set Security, but it would be nice to be able to do both with a single command.
    Any suggestions?
    Thank you,
    TPK

    I have uploaded the files and shared them.  These are the links
    Grade 11 Maths Standardisation Project Paper 2 2013.doc
    https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
    Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
    https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
    Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
    https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
    Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
    https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
    Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
    https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
    Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
    https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
    The first file is the problem file.  If you create this file separately, Acrobat will convert it perfectly.  But "Batch create multiple files" and the graphics are deconstructed on page 8

  • How to create a file and store its contents into another file?

    Hi,
    I'm having some trouble trying to create a code where I have to to create a file and store its contents into another file?
    I read the API, but I'm not certain how this file thing works.
    Here's my code so far:
    public static void main(String[] args) throws Exception
              File file = new File("tasks.txt");
              if (file.exists())
                   System.out.println("File already exists");
                   System.exit(0);
              Scanner scan = new Scanner(System.in);
              Scanner scan2 = new Scanner(System.in);
              //Scans the input line by line
              scan.useDelimiter("\\n");
              //Scans the input by tabs
              scan2.useDelimiter("\\t");
              PrintWriter outputs = new PrintWriter("newtasks.txt");
              outputs.print("ok");
              outputs.println(3);
              outputs.close();
         }

    I managed to change my text into uppercase, but how do I store the uppercase content into another file.
    -So this is what I did so far, I took a text file and modified its strings to uppercase.
    -Now I need to put those modified strings into another text file, is there a way where I can do that with my current code?
    -I already tried printwriter, but it doesn't seem to work
    public static void main(String[] args)throws IOException
              //Task[] oneHundredTasks = new Task[100];
              String uppercase;
              String combine;
              Scanner scan = null;
              FileInputStream in = null;
            FileOutputStream out = null;
            PrintWriter output = null;
            try
                 scan = new Scanner(new BufferedReader(new FileReader("tasks.txt")));
                 scan.useDelimiter("\\n");
                 scan.useDelimiter("\\t");
                while (scan.hasNext())
                     if(!scan.hasNext())
                          scan.next();
                     combine = scan.next();
                     uppercase = combine.toUpperCase();
                     System.out.println(uppercase);
            finally
                if (scan != null)
                    scan.close();
            //The program will try the input and output files
            try
                 in = new FileInputStream("tasks.txt");
                out = new FileOutputStream("newtasks.txt");
                int c;
                //The number "-1" is used to indicate that it has reached the end of the stream.
                while ((c = in.read()) != -1)
                    out.write(c);
            finally
                if (in != null)
                    in.close();
                if (out != null)
                    out.close();
         }

  • I am having problems creating PDF file and downloading them

    I am having problems creating PDF file and downloading them

    Hi Randy Keil,
    You might need to sign up with your Adobe ID and password at "https://cloud.acrobat.com/convertpdf"
    Then you can choose the desired files to create the PDF.
    Now, let me know what error message do you get while doing the same.
    What kind of files are you trying to convert to PDF?
    Have you checked with your internet connection and tried using a different browser?
    Hope to get your response.
    Regards,
    Anubha

  • Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some annonomus file, to which I have to go through several steps to get to My

    Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some anonymous file, to which I have to go through several steps to get to My Documents, and I can't seem to select the default in my preferences. HELP PLEASE!!!

    Before this update of what software from what version to what version using which OS?

  • Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open.  The it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64

    Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open.  Then it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64 bit.  I have avast virus software.

    Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open.  Then it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64 bit.  I have avast virus software.

  • The Domain file and creating multiple ULR's

    I've notice that the question comes up about publishing multiple sites from one MobileMe iWeb account. My question is this, as you have only one Domain file, to achieve publishing more than one site does this mean you create and publish site A, then back it up and remove this Domain file, then create a second site B, publish and backup and so on. Replacing the appropriate Domain file to make changes and republishing the changes.
    My interest is that my site is now around a hundred plus pages in length and it might be an option to subdivide them into several linked elements.
    If you have any thoughts or experience of creating multiple sites in iWeb that are in structure straight up and down with not too many curves I'd be very interested to hear about your experiences.

    You can easily create multiple sites with one MMe account.
    Yes, you have one domain file, but what you need to do is duplicate that domain file, so that you have one site per a domain file. Either this, or use the program iWebSites to help you organise multiple sites within iWeb.

  • How do I get my Old iWeb Sites off my External HD (1 Domain file) and onto my new internal HD?

    I justrecently had to replace my internal HD on my iMac. Before doing it, I backed up my 2 iWeb Sites (the Domain File) onto my external HD.
    Now I have a new Internal HD on my iMac.
    When I open my domain file located on my external HD, iWeb opens. Now I'd like to save the file back onto my internal HD.
    How do I save my 2 web sites that I now see on the left back onto my internal HD. (When I click on "File", "Save", it just saves it again on the external HD, because it's reading the file from the external HD?)
    Thanks....
    Brian

    You need to copy the domain.sites file from the external hard drive into your Users/Home/Library/Application Support/iWeb folder on the new hard drive. If there is no iWeb folder in the Applicaiton Support folder create one.
    Be sure it's your home library that you're working in.
    Happy Holidays

  • Missing domain files and how do I find them?

    Two related questions and I will try to be brief. both are related.
    1. If I have several iWeb projects, I create a folder in each client's folder where I store their domain.sites2 file. When I set up a new project for a new client I usually have to move the previous project (that is automatically launched in iWeb)into a temporary place until a newly launched and created iWeb project is created. Then I move the previous domain file back to its client folder before I begin work on the second one. I am sure there is an easier way to do this, but this works for me. So question one is is this the way to do this?
    2. When I did that today (launched iWeb, found client #1's project still showing there, closed iWeb, moved #1 to temp, relaunched iWeb and got "create a new domain?" which I said yes to, then told it where to save it to). However what was showing now in iWeb was a project I had worked on a long time ago, not a new blank slate. So I tried to find where that very old project was located to delete it completely so iWeb will start anew, and spotlight can not seem to find the domain.site file of that project. I have tried spotlight "domain.sites2, site, site2, domain" and all the rest of my clients projects are listed, just not this old one, yet it must be here somewhere or why else would iWeb automatically call it up?
    Anyway I can do a more in depth search for this file?
    I tried working a bit on the new project using the old file that appears in iWeb, but I don't know where it is saved to move it incase I want to start on another new project.

    I found the answer finally to both questions on a post dated today from "Ethmoid". It reads:
    "You need to go to your Home User Library and not your System Library - (note the difference), then Application Support/iWeb - open the iWeb application and your domain.sites files for the sites you have created should be there."
    I will use this location now to move files instead of the way I was doing them before within their own folders. much safer this way.
    Thanks,
    Lew

  • HT2548 how do i copy the domain file from OS 10.4 to a lion OS computer?  I made a copy of the domain file and copied it to my new computer, but it doesn't open in iweb when I double-click on it.

    How do I import an iweb domain file from an ibook (OS 10.4) to an imac (OS 10.73)?
    I copied the domain file from my ibook to my imac, but when I double-click on the file, it doesn't open in iweb. 

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.  Then place the domain file in your Users/Home/Library/Application Support/iWeb folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • LOST MY DOMAIN FILE AND INDEX DOESNT WORK :(

    HI, I got a really big problem here. Recently i got broken imagines on my web which i made it via iweb. Then sudently, my domain file is blank, and my index.html aswell! - i only have my other html files. SO are there anyway that could save me from this?! - I really dont hope that i have to start over. I read that iweb cant read html.file, but does apple have any apps that can read html files and publish it?
    HELP ME PLEASE

    What version of OS X are you using?

Maybe you are looking for