Re-Create the "Exchange" virtual directory in the "Exchange Back End" Site on Exchange 2013

Sorry for this stupid question.
In IIS, I accidentaly deleted the "Exchange" virtual directory in the "Exchange Back End" Site on Exchange 2013 (Mailbox Role).
What I need to know is the physical path to re-create it.
Thanks

Check http://blogs.technet.com/b/get-exchangehelp/archive/2013/02/07/managing-exchange-2013-iis-virtual-directories-amp-web-applications.aspx

Similar Messages

SMS_MP_CONTROL_MANAGER Failed to create the CCM_Incoming Virtual Directory

Hello -
I'm hoping someone could help me with this problem. I've searched so many websites trying to resolve this issue and it seems no matter what I try I keep getting the same error message.
I've followed the steps in setting up SCCM 07 from this web site which was very nicely done! I've also followed the directions on Microsofts Tech Net website on how to configure WebDav and IIS settings.
I'm working on a Virtual Windows Server 2008 32-bit OS, SP2, SCCM 07 SP2, IIS7
Here is the message I get in the log files:
Message ID: 4963
Process ID: 4364
Thread ID: 7996
Componet: SMS_MP_CONTROL_MANAGER
MP Control Manager detected MPsetup has failed to create the CCM_Incoming Virtual Directory.
Possible cause: The IIS IWAM account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IWAM account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The IIS IUSR account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IUSR account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
I could be completely wrong but I read somewhere that with the latest version of IIS doesn't install these user accounts. I checked to see if those accounts existed and they didn't.
I've tried what this one website mentioned:
http://myitforum.com...-directory.aspx
- Remove the MP role from the Site Server. Watch the MPSetup.log to ensure that the removal is complete.
- Uninstall the IIS component from the OS of the Site Server.
- Reboot the Site Server.
- Run ccmdelcert.exe from the SMS Toolkit.
- Reinstall the IIS component (with BITS) on the OS of the Site Server.
- Go into the IIS manager and allow WebDav.
- Add the MP role to the Site Server. Watch the MPSetup.log to ensure that the installation completes correctly.
These steps didn't seem to work, probably because it was for SMS 2003.
Here is the MPmsi log file:
<11-24-2009 17:39:28> SMSMP Setup Started....
<11-24-2009 17:39:28> Parameters: C:\PROGRA~1\MICROS~3\bin\i386\ROLESE~1.EXE /install /siteserver:DELGADO SMSMP
<11-24-2009 17:39:28> Installing Pre Reqs for SMSMP
<11-24-2009 17:39:28> ======== Installing Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:28> Found 1 Pre Reqs for Role SMSMP
<11-24-2009 17:39:28> Pre Req MSXML60 found.
<11-24-2009 17:39:28> No versions of MSXML60 are installed. Would install new MSXML60.
<11-24-2009 17:39:28> Enabling MSI logging. msxml6.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\msxml6MSI.log
<11-24-2009 17:39:28> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\00000409\msxml6.msi
<11-24-2009 17:39:30> msxml6.msi exited with return code: 0
<11-24-2009 17:39:30> msxml6.msi Installation was successful.
<11-24-2009 17:39:30> ======== Completed Installion of Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:30> Installing the SMSMP
<11-24-2009 17:39:30> Passed OS version check.
<11-24-2009 17:39:30> IIS Service is installed.
<11-24-2009 17:39:30> checking WebDAV configuraitons
<11-24-2009 17:39:30> WebDAV is configured
<11-24-2009 17:39:30> No versions of SMSMP are installed. Installing new SMSMP.
<11-24-2009 17:39:30> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<11-24-2009 17:39:30> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<11-24-2009 17:40:24> mp.msi exited with return code: 1603
<11-24-2009 17:40:24> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<11-24-2009 17:40:24> Fatal MSI Error - mp.msi could not be installed.
Component Services (DCOMCNFG) is running properly, no error messages when I was browsing around.
Any advice would be greatly appricated!
Thanks!

Just read the post below
http://social.technet.microsoft.com/Forums/en-AU/configmgrswdist/thread/5638cdf2-09d3-4750-995e-ae60973e86b8
<Remember to copy tasks from task scheduler to some different location because it gets wiped off in process)
Imp. Note: Running ccmclean /all on SCCM is one of these unsupported things.
Remove the MP as a site system role (if it is still installed), wait for it to finish
2.
Remove IIS completely
4.
Reboot
5.
Stop the Task Scheduler Service
6.
Rename the %windir%\Tasks folder to something else (or move it)
7.
Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
8.
Optional: Enable auditing on the \inetpub\wwwroot folder (and subfolders). Make sure to set local security policy to trap failures of file access. We will need this in case we see
the same security failure.
9.
Reinstall IIS, BITS, WebDAV
10.
Insure BITS and WebDAV are enabled
11.
Reinstall the MP
Server Engineer

Send a file that resides above the virtual directory to the browser using ASP.

How do you send a file that resides above the virtual
directory to the browser using ASP.
this doesn't work:
<% Response.Redirect(Server.Mappath("..\..\..\files\"
& rsgetefile("filename"))) %>

Basically you can't send a person to the location as that
would totally
defeat the purpose of placing files above the virtual root.
You can stream a
file from a page on the site if you use the physical location
on the server
to call it.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"lovewebdev" <[email protected]> wrote in
message
news:ec2paf$9ht$[email protected]..
> How do you send a file that resides above the virtual
directory to the
> browser using ASP.
>
> this doesn't work:
> <% Response.Redirect(Server.Mappath("..\..\..\files\"
> rsgetefile("filename"))) %>
>

What is Exchange Virtual directory and its role?

Hello there,
I am new to Exchange and I started reading about Exchange Virtual directories. I am struggling to understand the concept behind Virtual directories in Exchange and what is the role of this component. Can someone please shed some light and better yet supplemental
information to help me understand the concepts behind it? Let me know please. I am looking forward to any reply that would help.
Regards,
Lotusmail1
Franz Garcia

Hi,
Thank you for your question.
Exchange virtual directory is a directory which store some necessary URL to point to correspondent web page, those URL can provide service for user by Exchange server. it include the following component:
On Exchange CAS server:
Autodiscover: An important function of the Autodiscover service is to provide access to features for clients that are connected to your messaging environment. These features include the web-based offline address book (OAB), the Availability service, and
Unified Messaging (UM). The Autodiscover service must be deployed and configured correctly for clients to automatically connect to features.
ECP: The Exchange Control Panel is a Web application that runs on a Client Access Server providing services for the Exchange organization. This Exchange Control Panel is installed automatically when you install a Client Access server. To manage Exchange
from just about anywhere, you simply need to enter the URL path for the application in your browser’s Address field. You can then access the Exchange Control Panel. By default, the Exchange Control Panel URL is
https://yourserver.yourdomain.com/ecp.
EWS: Exchange Web Services virtual directories support the calendar sharing and other functionality offered by Exchange Web Services. The Exchange Web services included in Exchange provide an XML messaging interface that enables you to manage Exchange store
items and access Exchange server functionality from client applications.
Microsoft-Server-ActiveSync: Exchange ActiveSync is a client protocol that lets you synchronize a mobile device with your Exchange mailbox.
OAB: An offline address book (OAB) is a copy of an address list collection that’s been downloaded so a Microsoft Outlook user can access the address book while disconnected from the server. Microsoft Exchange generates the new OAB files and then compresses
the files and places them on a local share. You can decide which address lists are made available to users who work offline, and you can also configure the method by which the address books are distributed.
OWA: By default, when you install Microsoft Exchange 2013, you enable Outlook Web App. Microsoft Outlook Web App lets users access their Exchange mailbox from almost any Web browser.The Client Access server role provides proxy and redirection services for
Outlook Web App.
PowerShell: The Exchange Management Shell, built on Windows PowerShell technology, provides a powerful command-line interface for Microsoft Exchange Server 2013 that enables automation of administrative tasks. With the Shell, you can manage every aspect
of Exchange. You can enable new email accounts, create Send and Receive connectors, configure database properties, manage distribution groups, and more. The Shell can perform every task that can be performed by the Exchange Administration Center (EAC) plus
things that can't be done in the EAC. In fact, when you do something in the EAC, it's the Shell that's doing the work behind the scenes
On Exchange mailbox server:
PowerShell: this is the same with front CAS server.
We could refer to the following link:
https://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Jim Xu
TechNet Community Support

Can we deletete the eps/in directory after the upgrade

Gurus ,
we are in the process of upgrading our support packages through SAINT . we are using ECC6.0 version on Oracle AIX 64 bit .
hence for applying all the add-ons we load it from front end to \eps\in directory via SAINT .
But my doubt is ,
- can we manually delete the eps\in directory after the upgrade is over ? because each add on are around 145 mb . and i fear accumulation of those will cause problem
-How to find the space available in eps\in directory from the GUI ?

Hi,
You can safely delete files from EPS/in after you install them to the system, they will be in the Database so this files are not needed any more. In fact even if they are ther, you won´t see any new SP or Add On using SAINT & SPAM unless you copy new versions to EPS/in directory.

How to create an IIS virtual directory programmatically?

All-
Is it possible to create an IIS virtual directory
programmatically using Coldfusion? Is there some set of server
objects that could be tapped into using COM, for example?
Any guidance would be appreciated. Thanks.
-Josh

You should be able to do this (as well as all other
administrative tasks) using CFEXECUTE, Windows Scripting Host, and
IIS management object. Read IIS documentation. It contains tons of
ready-to-use scripts.

When I'm travelling I import photos onto my laptop's external hard drive and work on the images using virtual copies to develop them. When I get home, I want to import all the photos together with the developed virtual copies fromt the laptop's external H

When I'm travelling I import photos onto my laptop's external hard drive and work on the images using virtual copies to develop them. When I get home, I want to import all the photos together with the developed virtual copies fromt the laptop's external HD into LR5 on my PC desktop. But if I use the import button in LR I only get the original photo, not the developed copies. What am I doing wrong?

Since your current editing workflow is based around Virtual Copies there are no actual files containing the edit data. Therefore, you'll need to use the 'Import from another catalog' option ( see File menu).

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

How to create a virtual directory for the Report Server

Hi, I am new to server admin and need help with configuration.
I would like to map a physical directory on the server so that users can use a virtual path to save report outputs in that location. For example the form will call the report with desname = 'd:\xyz\abc.pdf' and the output file will be saved in a predefined directory on the server. I know how to do it on the forms server using the orion_web.xml but not sure about the report server configuration.
We are using rwservlet to run reports on 10G release2/Windows 2000.
Thanks in advance,

Virtual directories are mapped in the httpd.conf file in the Apache directory as aliases:
Alias /xyz/ "d:\xyz\"
You can now call the report output with
http://server/xyz/abc.pdf

How to nest a WCF service into a virtual directory off the Default Web Site

I have a service called PdfCreator. I want it installed on my servers in this directory for QA: "Default Web Site/QA/PdfCreator/PdfCreator.svc". I want it installed in this directory for DEV: "Default Web Site/DEV/PdfCreator/PdfCreator.svc".
If I specify QA/PdfCreator in the project's "Web service virtual directory name" field PB complains about invalid characters (the "/"). Is there any way to get around this? The only work around I can think of is adding "qa" or "dev" as a suffix/prefix to the virtual directory name ("Default Web Site/QAPdfCreator/PdfCreator.svc") which doesn't really give me what I want.
This isn't a big deal with only a few services but could become one as more are created.
Thanks,
Mark
PB 12.5.2.5006

Antonio, Thanks! That seems to have worked for Safari. However, we like Firefox too, and I tried to set that up the same way, but was told "can't find a manifest for that app". I wonder if I can copy the Safari list then alter and rename it?
...Tom

Does the weblogic virtual directory has a max download level?

got a web project running in a Weblogic 12c. I have my virtual directory, and inside my directory I have a 18 MB zip. So when I try to download the zip from the url I have from my virtual directory; it starts to download but halfway during the download it ends my some times when I´m at 5MB, other times when I´m at 10 MB.
I have test it in different networks and pc, but it´s always the same. So I was wondering if there is a configuration in the virtual directory on in the weblogic that restricts the amount of data that I can download. Here is my virtual directory configuration:
<?xml version="1.0" encoding="UTF-8"?>
<weblogic-web-app xmlns="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.0/weblogic-web-app.xsd">
<container-descriptor>
<prefer-web-inf-classes>true</prefer-web-inf-classes>
</container-descriptor>

<virtual-directory-mapping>
<local-path>C:\Oracle\Middleware\user_projects\domains\downloads</local-path>
<url-pattern>zips/*</url-pattern>
<url-pattern>*.jpg</url-pattern>
<url-pattern>*.zip</url-pattern>
</virtual-directory-mapping>
<jsp-descriptor>
<keepgenerated>true</keepgenerated>
<debug>true</debug>
</jsp-descriptor>

<context-root>pushFuller</context-root>
<fast-swap>
<enabled>false</enabled>
</fast-swap>
</weblogic-web-app>
Thanks in advance

I have gone to the BEA web site to download the Service Pack 4. I kept getting this message: "Your session has expired. Please log in again." no matter how fast I filled out and submitted their form. I also e-mailed the BEA support to report the problem. But, I have not yet received any reply. It has been almost 24 hours since the problem was reported.
What should I do?

Refresh table and display the records after insertion of data from back end

Hi Experts,
JDEV 11.1.2.1
I have a useacase which needs data to be inserted from oracle back end procedure and displayed in a ADF Table Component, when a button is pressed.
is this possible?..if yes , how?
Is view object will automatically refreshed and fetches newly created(from back end) rows?
thankz in advance
PMS

Hi user707,
thankz for ur reply....
i think after executing a procedure you want to call commit operation. better you can perform this.getDbtransaction().commit In Application Module;yes i want to commit transaction after executing back end procedure using preparedStatement.Procedure is for inserting data into same table , which used for creating VO and Read only ADF Table.Procedure is executed fine, but newly created records are not getting into ADF table.Once i did commit opeartion inside back end procedure, whole records are getting into ADF Table.
Is there any way to get whole records without doing Commit operation inside Back end procedure?
PMS

Itunes keeps creating a new itunes directory in the wrong place!

i'm pulling out my hair trying to solve this problem!
in preferences, i have G:/iTunes selected as my itunes media folder.
also, i have itunes organizing this folder. most of my media is in there.
however, itunes keeps making a directory in C:/Users/Admin/Music/iTunes.
i don't want it to do this.
i just want everything itunes-related on my G drive.
i keep deleting that directory (which deletes all of my playlists)
and when i go to reimport my playlists from the G drive, itunes starts saving stuff on the C drive again.
why is it making 2 itunes media folders?
how do i make it do what i want it to do???
help please!

Caution is a wise move. Here is the standard layout of the itunes folders.
In this layout you can happily move the whole iTunes folder to a new path or drive and use the SHIFT-launch iTunes method to open the library in the new location. iTunes will use relative links from the location of the library to access each file. The steps I gave above should allow you to rebuild this standard layout on your G: drive in a way that keeps iTunes happy - ie. when you are finished it should work, whereas if you just move everything around and fire up iTunes without the intermediate steps it is likely to be completely broken.
Note that *Step 1* is to copy the contents of the C:...iTunes folder to the root of drive G: This will place the *libray files* (the stuff outside the red box) in the correct relative location to your *media content* (the stuff inside the red box). The subsequent stages should get you to the point where the library is called iTunes instead of G:\ and your media is at *G:\iTunes\iTunes Media*. When you are happy the everything works via drive G: (and hopefully after taking a backup) you can delete the old iTunes folder in drive C:.
tt2

Error when updating Client Access Front End Service to Exchange 2013 Update 6

When updating to Exchange 2013 Update 6 we received the following error at the Step 11 of 13: Client Access role: Client Access Front End service step:
Error:
The following error was generated when "$error.Clear();
$fe = get-ActiveSyncVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($fe -eq $null)
new-ActiveSyncVirtualDirectory -DomainController $RoleDomainController -Role ClientAccess;
else
update-ActiveSyncVirtualDirectory $fe -DomainController $RoleDomainController -InstallIsapiFilter $true
" was run: "System.Management.Automation.ParameterBindingException: Cannot convert 'System.Object[]' to the type 'Microsoft.Exchange.Configuration.Tasks.VirtualDirectoryIdParameter' required by parameter 'Identity'. Specified method is not supported. ---> System.NotSupportedException: Specified method is not supported.
at System.Management.Automation.ParameterBinderBase.CoerceTypeAsNeeded(CommandParameterInternal argument, String parameterName, Type toType, ParameterCollectionTypeInformation collectionTypeInfo, Object currentValue)
--- End of inner exception stack trace ---
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext)
at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)".
Problem was that if you have more than one ActiveSyncVirtualDirectory, the installer for Update 6 fails because it's not expecting an array of virtual directories to be returned. Solution is to remove the "extra" virtual directory, perform the
installation, and then re-add the virtual directory.
None of the other types of virtual directories are susceptible to this, only ActiveSync.

Hi,
Please try to reset registrar state:
http://tsoorad.blogspot.in/2013/04/lync-2013-ee-pool-wont-start.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Error while creating request list Unable to detect the SAP system directory

We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                                                 com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
     at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
     at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
     at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
     at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
     at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
     at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
     at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
     at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
     at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
Prathap

Did you get this solved?
I have the same problem

Re-Create the "Exchange" virtual directory in the "Exchange Back End" Site on Exchange 2013

Similar Messages

Maybe you are looking for