Re: Creation of storage location for halb which was not assigned primarily
Creation of storage location for halb, every thing processed with raw materials for production orders reg fert and even settled. Later a storage location is to be created for halb. When I created storage location for halb and when I want to post initial stock through MB1C I am getting error saying material type and storage location not maintained. Can any one solve my problem. Thanks in advance.
Hi Vachanala,
Are the material masters of your materials extended to the new storage location / have you defined automatic creation (for movement) in customizing (SPRO > Material Manegement > Inventory management & PI > Automatic movements > Create Storage Location Automatically)?
If the material masters are not extended you can't book those materials to that SL.
BR
Csaba
<b>material master</b>
http://help.sap.com/saphelp_46c/helpdata/en/ff/515ee849d811d182b80000e829fbfe/frameset.htm
<b>automatic creation of storage data</b>
http://help.sap.com/saphelp_46c/helpdata/en/a5/6330f243a211d189410000e829fbbd/frameset.htm
Similar Messages
-
Automatically creation of storage location for material, in MF60
Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
AlbaThanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba -
I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan
You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
Updating to iOS 5 removed the hack and the unofficial unlock.
All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source. -
To begin, what ADA-compliant options are available to work with a service representative? I've never found the online chat service support to be available during my waking hours after checking over the last week. I can't find a contact email for support, either. I've been instructed on several occasions that I will need to make a voice call for customer service, but unfortunately, this will not be possible. I will require text-format assistance from customer support to address two issues which I am unable to solve on my own:
1) I was charged for service following the cancellation of my service; this includes a period following cancellation during which no service was provided. After working with a representative in person, I was told that my final bill would be adjusted to reflect the legally billable amount. This was three weeks ago and I haven't received a response, and I haven't been able to find a way to pursue a resolution - What can I do to help move this process forward?
2) It appears I will be unable to pay my bill after this dispute has been reviewed. My phone number is no longer with Verizon. The online bill payment login requires a phone number - I have never been provided with any other account number. Unfortunately, Verizon appears to close access to online bill payment when the phone number is transferred, even to accounts with unpaid invoice amounts. How can I pay my bill online?kananga wrote:
To begin, what ADA-compliant options are available to work with a service representative? Good question, and one that I don't know the answer to. Does anything on this page help? Products & Services Overview | Verizon Wireless
1) I was charged for service following the cancellation of my service; this includes a period following cancellation during which no service was provided. Service is normally billed through the end of the billing cycle, whether service is provided or not. "Cancellations will become effective on the last day of that month’s billing cycle, and you are responsible for all charges incurred until then." After working with a representative in person, I was told that my final bill would be adjusted to reflect the legally billable amount. According to their legal docs, the "leagally billable amount" is through the end of the billing cycle. This was three weeks ago and I haven't received a response, and I haven't been able to find a way to pursue a resolution - What can I do to help move this process forward?
2) It appears I will be unable to pay my bill after this dispute has been reviewed. My phone number is no longer with Verizon. The online bill payment login requires a phone number - I have never been provided with any other account number. Unfortunately, Verizon appears to close access to online bill payment when the phone number is transferred, even to accounts with unpaid invoice amounts. How can I pay my bill online? You cannot pay online once the account is cancelled. You will be mailed a paper copy of the final bill, and you can mail a check, or possibly call in and pay over the phone. But online is no longer an option once the account is cancelled. -
Is there any function module which will upload storage locations for a mat
Hi gurus,
Is there any function module or BAPI to extend the storage locations of material which is done through <b>MMSC</b> transaction. I need to write a program to upload new storage locations for some materials.Please advise.
Thanks ,
Sam.You can do this using the BAPI_MATERIAL_SAVEDATA
Regards,
Rich Heilman -
Hi everyone,
I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
on different physical disks to have them not slow-down each other in case of intensive disk accesses.
So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
Thanks in advance.
Cheers,
SebastianSecondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform. Lastly, you could copy the vhd file to a different location
before starting the VM.
.:|:.:|:. tim
Hi Tim,
thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
2x physical machines carrying severel HDDs
8+ VMs spread to run on the 2x servers
when setting up replication I can only set the storage-location from server A on B and vice versa B on A
Thanks again for your reply.
Cheers,
Sebastian -
Auto Creation of Storage Location at the time of Goods receipt
Dear All
Please tell me how can i create storage location automatically at the time of Goods receipt.
i already made the configuration in OMJ8 for movement type and required plant
still, at the time of creating PO its not getting created..
Please advice
Narendra C.Hello Narendra,
If you are trying for automatic creation of strorage location for goods movement to special stock, then ithe data will nit be created. This standard SAP functionality.
Also if you have maintained storage location in the preceeding documents, then it will automatically fetched during goods reciept.
BR,
Tushar
Edited by: Tushar Patankar on Feb 4, 2011 12:50 PM -
Deletion and Creation of storage location.
Dear Experts,
Plz advise how can we un-assign any storage location from any material & how can we create the new storage location.
Regards
Sumit KalyanHi Sumit,
System will allow the stock posting to storage location for which u have set Deletion until it has been achieved.
You can block the storage location of a material without affecting the rest of the location using the same material.
1.Create a Physical Inventory document for the storage location with transaction MI01 by Selecting the Posting Block checkbox.
This would prevent transactions from occuring until you either post or delete the physical inventory document.
or
2. U can create & delete the stoarge loaction at OX09. This will affect the all the material which has assigned to same storage lacation. Normally MM will do this,
Regards
Pradeep -
Where and how to find the storage locatation for the consignment stock
where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no - werks - batch
xxx sg11 - 200352ac
table : mchb
material no - werks -lgort - batch
xxx sg11 sg10 200352ac
xxx sg11 gs11 200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN -
Default Plant and storage location for components in MFBF
Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
MurugesanHi MURUGESAN !
Can you give me some information more in Special Procument Configure in plant 2000 like:
- Procurement type (maybe F)
- Special procurement (Maybe U)
- Plant (Maybe 1000).
- Issuing plant (maybe 2000)
We will check together.
Regards,
Tony -
Storage location for 331 movement
Dear All.
Is it possible to assign storage location for sample usage movement in UD inspection lot stock tab. our requiremnt is through lot post material by 331 movement to Scrap storage location.
Regards.
dev123Hello Dev,
Not really!
By 331 movement stock reduces from system.
Storage location is required for those movement types for which stock is either stored or transferred from one location to another.
What you can do is, you can transfer this quantity to block stock instead of sample usage. Later you can scrap this by 555 movement.
Regards,
Anand Rao -
Reg storage location for all the materials in the plant.
Dear Gurus,
In my plant I would like to know the storage location for all the materials in the plant.can u guys suggest me the solution?If Stock is there in Each Storage Location then You can Run MMBE Report by Inputting Material & Plant. Then it will Show All the Storage Location Stocks for a Plant.
Or you can Run MM60 Report Which will give you Detail Report.
Else you Can Check in MMSC List of Extendable Storage Locations.
Regards,
Ashok -
Hi
In application (no access to SPRO), where can I find the storage locations which assigned to a particular plant.
Any Tcode..
regards
RGYou can check in any MM transaction code like in MMBE or in MB52 or in MB51 or in MM03....etc.
In the selection screen of MMBE please go to storage location field and press F4.
Now system will display all storage location with plant and if you wants to see all storage locations belongs to only one plant,in the out put of this field u can enter the specific plant and it will display all storage location for that plant.
I hope it will help. -
Block Storage location for particular material
Hi,
We gave defined storage location for finished product as follows>
1050 - 2-8°
1040 - RT
When I have created one material, wrongly i have created it in 1050 instead of 1040.
Then i have extend that material to 1040. Now that material is showing both storage locations.
Is it possible to block storage location 1050 for this material only?
Because of both SLOC thre are chaces of wrong receipt in 1050.
Pl. help me to solve this problem.
GkudeDear Mr. Kunal,
I have flagged storage location for deletion but till for this storage location system allows receipt also system allows stk. transfer in this location.
Pl. help me so that storage location is permanently deleted from the material or system not allow for GR.
Hope for your reply.
Gkude -
Any Idoc for "storage location for a material" ?
Hi Everyone,
Does anybody know if there is an IDoc type to insert storage location for a material (Table MARD).
BDC is also an option but IDoc should be a better choice.
Thanks & Regards,
AnkurHi Ankur,
Storage location view of a material can be created with
MATMAS message type ( Segment E1MARDM ) . You can also use program RMDATIND with relevant data to add the storage location view.
Cheers.
Maybe you are looking for
-
I have a macbook pro 13 " and I shall like settling on an external hard disk ( SSD) Windows 7 not to split up the main disk.
-
Copy and Pasting Text in Photoshop
Everytime I've tried pasting text from a Word document or website, all the words jumble on top of each other into one line. Why can't they separate into separate lines like they were originally formatted to look like? Thanks, Mason
-
Gateway 24"lcd with 9200 card?
I'm thinking about buying a Gateway 24" lcd to connect to my ATi 9200 video card. Is this a good choice? I've never used an lcd monitor and wondered if the 128 meg 9200 card would work ok? Thanks, Tom
-
Constraint: disable validate returns error while trying to load data
Hi, I may be missing something but this is what I'm facing: Table ttab has a primary key, let say ttab_pk, that I modified using this command: alter table ttab modify constraint ttab_pk disable validate. I thought I would be able to load new data wit
-
Service Group is blank after transporting into IST system
Hi All, We have 2 CE 7.2 systems as DEV and IST which are well connected to NWDI. In DEV NWDI track, we have many WDJava components which consume web services available on DEV system. For these services, we have created a Service Group which has all