Re: critical scrupdate to correct a PC to printer communication issue , dot ubber?

Excuse me but you skipped right over my question to answer the person under me. Nothing that has been posted works for me.
I accidentally cancelled a critical update. How can I get it back to install it? I see it in the history of my Support Assitant but it will not let me click on it, as it has a red X to the left of it.

Hi there jan92859;
I did not went over your post but I should have acknowledge that I was doing a bit of research;
What Operating System do you have?
Well how long ago was this, you can do a system restore and you should get the update back as you might understand this is a completely different issue as the original issue on the thread but I will do my best to help you never the less.
Go and try the sysyem restore, remember that the file and documents will not be affected.
Hope this helps!
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

Media out or not loaded correctly when attempting to print since iOS 7 upgrade?

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?

How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?
Thank you.

dadanas wrote:
Hi Simcah, I have a similar problem. Have you found out any solution?
thanks, dan
You need to ask the printing service provider. Dealing with color totally depends on the printing process involved and of course the machines used.

Hi, I am trying to print to an HP4050n via a secure wireless network. It prints but the default page setting sent to the printer is JIS B5. I have to hit the "Go" to get the printer to print. I have the correct setting in my Printer Settings (Letter).

I am attempting to print via a wireless (secure) network to an HP4050n printer. The document prints AFTER I choose "GO" on the printer. It is waiting as it wants me to load the JIS B5 paper/tray. I have the printer defined as Letter but in spite of that, it is requesting a different setting. I am thinking that because I am using the Generic PCL setting (I also tried the HP 4/5 PCL ) it is not communicating correctly. It does print once I get up and hit the GO button.
Any ideas? Thanks.

The paper size would normally be coming from the application rather than some setting in the driver. I've never seen the Generic PCL driver send a request for B5, but then I do use A4 rather than Letter and I don't have a PCL printer at home to check this. But I do think it has more to do with the application/document being printed.
For the application that you are using, is there are a separate Page Setup menu?
If the page and document is correctly set to Letter, you mention a wireless secure. If you mean something more than a wireless network that requires a password to access it, such as using https to connect to a remote server, then it could be settings for the shared printer queue. Although these shared printers are usually just an access point (throughport) for the remote client. Still, if you do have some additional network server for this secure wireless network, then this could be contributing to the incorrect paper size call.

When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?

When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?

Those pixel dimemsions have aspect ratios that are not the same as a 5 x7 print:
1360 x 1360 = 1.0
790 x 640 = 1.23
2048 x 1366 = 1.5
An 7 x 5 image = 1.4.
So you'll need to crop the images to 5 x 7 before printing. The first two images are a little light in the pixels to produce a high resolution 5 x 7 print.
Happy Holidays

When will Apple correct the CD insert printing problem with 11.02.26?

When will Apple correct the CD insert printing error in itunes 11.02.26?

Internal Exception: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
ORA-00942: table or view does not exist

Downloaded critical update to correct pc to printer communication. install fails in dot4scrubber.exe

I have tried downloading and installing this critical update and it keeps hanging up in the dot4scrubber step. If I abort the update, I lose communications with my printer.

Hi there jan92859;
I did not went over your post but I should have acknowledge that I was doing a bit of research;
What Operating System do you have?
Well how long ago was this, you can do a system restore and you should get the update back as you might understand this is a completely different issue as the original issue on the thread but I will do my best to help you never the less.
Go and try the sysyem restore, remember that the file and documents will not be affected.
Hope this helps!
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

How do I correct a printer communication problem?

How do I correct the following error when trying to print on my Macbook Pro to an epson XP-410 printer. "rastertoescpII quit unexpectedly" Communication is there with the printer as I can print a test page. another Macbook pro also prints fine to the printer.

Hello, MarkDallas.
Thank you for visiting Apple Support Communities.
Here are a couple articles that I would recommend when troubleshooting printer issues.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/HT3500
Regards,
Jason H.

Microphone not working correctly / Working out of nowhere / Driver issues

Yeah I have the T61p-A24.
The microphone isn't working for me. I am trying to use skype and talk to my family. I tried a few different drivers and rolling back a few times. All of a sudden yesterday I could hear myself through my speakers. I didn't have any programs running. I just heard myself, and there was a big echo feedback sounding like the mic was on high. I saw through settings that the mic was working, but it wouldn't turn off. Now that it is turned off mysteriously, I can't get it to work like before. I didn't try it on skype when it was working. I just want it to work. I have heard through other posts in other forums that this is not just my problem that it is just sheer luck you are the lucky one to have the problem.
Please I need this fixed. Thanks.
T61p-A24
15.4"
3GB Ram
256MB video ram
T7700 Core 2 duo 2.4 Ghz
Nvidia Quadro FX 570M
Vista Ultimate 32

Hello,
Just to verify, you are using the ThinkPad T61p's built-in speakers and microphone, and not a headset, correct?
If so, it sounds like the microphone is picking up the audio from the speakers and causing feedback.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

LOGO is not printing correctly in Production but printing correctly in Qual

Hi Friends,
I am an ABAPER.
In Scripts I had a logo. Problem is in development and quality systems it is printing correctly but it is not printing correctly in Production system. I have tested all the development, quality & Production systems with the same printer. Experts please guide me where exactly the problem is how to solve it. Good points will be rewarded for related solutions.
Hi Nageswar,
The exact problem is the logo is alphabetical characters only, but for example APPLE is the logo. The word Heading 1: APPLE. is in Coloured BOLD letters. In development and quality it is printing as it was original logo. But in Production the letters for APPLE is printing in such a way that A is printing as dotted letter A and so on for PPLE. But in quality and development is working fine Printing as BOLD letters.
Finally want to mention that APPLE is a scanned logo. Its properties were same in three systems i.e, development, quality and production.
Experts please help me.
Edited by: pavan kumar on Feb 6, 2008 12:26 PM

Not correctly in the sense. Please explain the error you are getting.
Hi Pavan ,
Check the printer settings it SPAD transaction and check printer settings were smae in both systems.
Regards,
Nageswar
Edited by: Nageswar Vattikuti on Feb 6, 2008 5:01 PM

Blog pages not posting correctly... spacing and placement issues... WHY!

So I've just started using iWeb to post photo blogs about my adventures in snowboarding.... The home page turned out great... BUT the individual blog posts are not posting correctly at all.....I add my entries like so....
text,text,text,text.vffdfdfdsfffvbfss
then an image here
more text,text,text,klhkjhkhklhlh
next image here
more text,text,text
another image here
So after I get it all done and post it the text and image placement comes out very different from how I entered it... Sometimes the image is over the text.....
I have to go back and move my images around and add massive amounts of spacing to get it to seem somewhat normal... it's not coming out how I want it... WHY is iWeb doing this....
Here's the URL to my Blog.... http://web.me.com/tylerbrawley/TylerBrawleys_Blog/Splitboarding_the_Wasatch/Entries/2009/3/27_Mill_D%2C_Short_Swing3-27-09.html This published page looks nothing like what it is in iWeb...
Here's the same Blog published to a web site forum... http://splitboard.com/talk/viewtopic.php?f=5&t=6633
I wish I could get iWeb to publish just like that... Can anyone help?
Thanks in advance!

Really? No one can help?

I have had two instances of having a downloaded album "scrambled" while playing on appletv, I.e. the track listing remaining correct but having the wrong songs play. Once this has occurred the album does not play correctly. Any help with this issue?

I am having problems with Apple TV scrambling albums while playing from iTunes. The track listing remains correct but the songs play out of order and not all of the songs seem to in place, I.e. a song that played previously under one title will play as a different title. Any thoughts or help? Thanks.

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

HT3702 I'm TRYIN to dwnload an app however it's fails bc the security code on my card is incorrect however it is correct how can I resolve this issue

I'm TRYIN to dwnload an app however it's fails bc the security code on my card is incorrect however it is correct how can I resolve this issueU

This happens to me as well

Illustrator PDFs print correctly from PC, but print too dark from Macs

Photoshop and Illustrator PDF files (CS5 & 6) print correctly from my work PC, but not either of my Macs. See below:
At work, I have a Dell PC and an iMac, at home I have a MacBook Pro.
At work there is a big office color Ricoh printer for the Dell and iMac, at home I have a Epson 3-in-one laserjet for the MacBook Pro.
Both the work and home Macs will print Illustrator/Photoshop PDFs very dark/undersaturated/off color on their relative printers, but the work PC prints them correctly.
At work, If you hold up a print of a PDF file printed from the Dell PC, and one printed from the iMac, they are completely different looking - the Dell print matches the Dell and iMac screens, but the iMac print is very dark and dull.
At work, when I open a Illustrator or Photoshop PDF on the work PC and send it to the Richo printer, it comes out perfectly matching the screen, but, if I open it on the iMac and send it to the Richo printer, it prints too dark/off color.
These are the *exact* same PDF files I am opening on both the PC and the iMac - our files are saved on a server so I'm accessing the same documents on both machines.
Also, I create the files on the iMac and save them to the server on the iMac, but if I open them on the iMac it prints too dark, and if I open them on the PC, it prints correctly.
At home on the MacBook Pro, the prints are also much darker than the screen (despite color calibration with a ColorMunki as well as following all Epson's color calibration steps) and I see a similar color problem as printing to the work printer from the work iMac.
Someone please tell me this is just a printer profile thing and I can go in somewhere on my Macs and switch something so they print the same as the PC does!
Thank you in advance for explaining why my Macs are making me pull out my hair!

the iMac it prints too dark
your print space is off on the Mac
or you are applying the wrong source profile or both
on the MacBook Pro, the prints are also much darker than the screen (despite color calibration
EDIT: sorry i misread that as your monitor was also dark, if the mac displays the problem doc proper, you are targeting a bad print space, that's where i would look...
you app is apply the wrong source profile (or your monitor profile is off)
basing the source>print space conversion on the wrong source profile could account for your printing woes
be sure you are embedding an ICC profile in your doc, are opening it in a color-managed app, and it should display properly
be sure your workflow uses the embedded profile and your printer is setup to convert to the proper printer profile
color management theory
epson workflow

I cannot printany web pages or emails over a wireless home network. My OS is windows 7 and am using an Epson printer. I know I have the home network set up correctly as i can print files over the network.

I cannot print any email or web pages over a wireless home network. I know that I can print my files over this network, just not anything from the web or emails using Firefox. I am using Windows 7 and printing to an Epson.
== This happened ==
Every time Firefox opened
== when I set up the wireless home network.

The most likely reason for this is that the wrong printer is chosen in the File->Print window.
In Firefox, go to File->Print and click the dropdown box with printer names. Ensure that the correct network printer is selected, then try printing again.

Re: critical scrupdate to correct a PC to printer communication issue , dot ubber?

Similar Messages

Maybe you are looking for