Re: CS5.5 GPU Hack - Not Working?

I tried the EXACT same steps with Adobe Premier Pro CS5.5 to apply the GPU hack but after modifing the cuda_supported_cards.txt file Premier Pro CS5.5 will not start. It will just crash. But when I restore the cuda_supported_cards.txt it then starts up correctly (but with no GPU hack obviously).
What's wrong? Anyone have the same problem?
FYI: I am using the Shipped Boxed Version of the software as it was shipped to me.

It worked! OK so what I had to do was change the FIRST line of the text file to my graphics card's name.
The reason why it DIDN'T work before is because I was APPENDING my graphics card's name to the END of the text file, hence I was increasing the number of text lines by ONE.
So I think CS5.5 does a check for TOTAL lines in text, however if you change ONE of the EXISTING lines in the text file then it will work.
Please note I was using a shipped boxed version rather than the downloadable version.

Similar Messages

I'M WITH STUPID! sendmail.cfm hack not working...

Hi, I'm a lonely, stupid, ignorant person whom is not interested in code or building a sendmail page. I can however, build a frameset in DreamWeaver and up load its page's and content onto the net using filezilla and a webhosting client, I can even build my own btn bar with a get URL content mainframe code...arrrggghh. But then stupid comes back and say's, "use a 2004 mx flash tutorial from the 2004 Flash MX bible, and insert its SWF file from a Flash FLA from chapter 30" and guess what...It doe's not work! ooohHa! And a little horn apears, as a saintly brow turn's into a not so saintly V shaped furrow. Please, can anyone help, stupid?
I need to know how to alter the sendmail code, to send email's to [email protected] from the contact page on the http://www.pizzapal.co.uk website.
function sendComments() {
var sender:LoadVars = new LoadVars();
var responder:LoadVars = new LoadVars();
responder.onLoad = function(success){
if (success) {
   _global.serverTime = this.timeDate;
   _root.gotoAndStop("output");
} else {
   _root.gotoAndStop("error");
sender.fromEmail = fromEmail_txt.text;
sender.fromName = fromName_txt.text;
sender.body = comments_txt.text;
sender.sendAndLoad("http://[email protected] ", responder, "POST");
_root.gotoAndStop("wait");
this._lockroot = true;
Right? Wrong? Plus, what file do upload onto my server to accomapy the SWF sendmail.cfm page.
Many thanks for reading and I hope it was entertaining because actors like me and Joey are important to.
The sendmail_cfm.swf is attached.

Please can anyone remove the report abuse icon because I cannot continue with this thread.
Sabby76
Thanks Ross
I accidentally deleted a content folder from the frameset and that meant due to low practical skills in Dreamweaver, I went ahead a deleted the whole site instend of renaming a secondary copy. I then built the frameset up again this evening after going for a walk to cool down, it was one way geetting to know Dreamweaver a little better. The time gave also an oppotunity to think about the sendmail problem and thing's were clearing on the return home, so I sat down a dragged in some new file's from the tutorial C.D and started again, with a copy paste from your email. Thank's once again, it was your advise that truned my attention to the sendmail.cfm, which incidentally, I had over looked on the first attempt's to get the contact's page running. It still doe's not return mail though, so I thought might like to have a look at the script from the sendmail.cfm file... {
I hope I carried out your advice correctly and notice also the server port, which I have changed from 23 to 21 and the the servers I.D also was scrubbed in favor to my hosting clients. I've sent then a question on this subject, regarding your question on weather or not their server run's cfm, I will inform of their answer and keep trying anyway.
sabby76
Date: Wed, 23 Sep 2009 12:48:52 -0600
From: [email protected]
To: [email protected]
Subject: I'M WITH STUPID! sendmail.cfm hack not working...
Your code should look like this:
function sendComments() {
var sender:LoadVars = new LoadVars();
var responder:LoadVars = new LoadVars();
var scriptURL:String = "http://www.pizzapal.co.uk/sendmail.cfm";
responder.onLoad = function(success){
if (success) {
   _global.serverTime = this.timeDate;
   _root.gotoAndStop("output");
} else {
   _root.gotoAndStop("error");
sender.fromEmail = fromEmail_txt.text;
sender.fromName = fromName_txt.text;
sender.body = comments_txt.text;
sender.sendAndLoad(scriptURL, responder, "POST");
_root.gotoAndStop("wait");
this._lockroot = true;
And then, open the sendmail.cfm page in Dreamweaver or another text editor, find the email address the script is sending to (I am assuming this is part of the tutorial in the book as well...) and change it to your mailto:[email protected]
Upload the SWF, and the CFM and it should work.... assuming your web host server runs coldfusion scripting.
>

My Adobe Flash CS5.5 did not work while it is opening a .fla with big size

This is a very serious trouble...
I have a .fla with 101MB.
I always use this file and there is no problem on opening this file before.
This morning , I found that while I am opening the file, Flash did not work. It said Adobe Flash CS5.5 stop running <--- (I forgot what is the whole message)
I have used my computer for only 1 and a half year only, my I think I have enough RAM and memory to run my Flash CS5.5 , but this problem did not appear before and appear in this morning
Can somebody tell me what the problem is? Thank you.
P.S. here is some information of my computer
CPU : Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz 3.20 GHz
RAM : 4.00GB (3.18GB available)
System type: 64-bit

Set the library as "merge into code" and the problem doesn't happen.

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

CS5 Illustrator shortcuts not working PC

Hi, im using CS5 and changed my key board language configuratiosn and now my illustrator short cuts as Ctrl + and Crtl - (for zoom) are not working...
When I run the program there is a pop up window thas says:
Error loading plugins.
Keyboard Shortcuts.aip
SVG File Format.aip
Variables Panel.aip
Now I have deleted the spanish keyboard setting and back to the US one but still not working, Can someone help me??
Thanks alot
Daniel

THANKS ALOT for this!!!
this was the problem the CA antivirus
Best Regards

Trying to do 6.3 raw update for CS5 through Bridge not working

Been trying to update 6.3 raw for CS5 through Bridge and a pop up window says I am not the administrator for my computer. I sign in as the admin still does not work. I have tried installing in manual mode no luck either.

If you are working on Windows OS, then try to run the patch executable in Admin mode using "RunAsAdministrator" option in the right click context menu.

Flash CS5 code hinting not working?

Just installed the new Flash CS5 trial and code hinting doesn't appear to be working! I have added all my custom class paths in to the AS3 source paths, but I don't get any code hinting for any of these just the same old code hinting you get in CS4. Am I doing something wrong or does it just not work?
UPDATE: If it helps, in the code editor i get a small yellow triangle with an exclamation mark in, in the bottom right hand corner. When I have over this it advises me:
" *** Unable to build code hint cache. Please save the associated FLA into a different folder. There are too many files on the classpath. *** "
This error message appears no matter what FLA/Class i open, and moving it makes no difference.
UPDATE: Problem solved, the "There are too many files on the classpath" was the clue! Slimmed down my library and all seems to work now.
However, this does bring me on to another question.. does anyone know how many class files flash can comfortably cache? I use some fairly chunky libraries in my work and am wondering if i'm going to find myself constantly slimming them down after a while?

The reason everyone gives for AS3 is that AS2 was buggy.
I don't think so. AS3 is a better language, better designed, more consistent, more powerful. I would switch to AS3 for that, not because of bugs - but I don't know what's the reason behind everyone's choice.
AS2 was not buggy, people were writing buggy scripts
AS2 was buggy. Maybe people were writing buggy scripts too, but believe me it was buggy. However AS3 is at the very least equally buggy. It is better designed, more consistent, but equally buggy in its implementation.
All software have bugs, but programming languages usually undergo a stricter and more thorough revision than other kinds of sofware because the consequences of bugs in a programming language are more disastrous.
But that's not the case of ActionScript. Maybe because of its history and its legacy, or maybe because Adobe was always dedicated to completely different kinds of software, like PhotoShop, Premiere and the like, and suddenly dove into the business of developing a programming language without having the know-how.
The level of bugginess of ActionScript is amazing. I work with actionscript daily and there's no day that I don't run 4 ot 5 times into some problem due to some bug. Not that I discover new bugs every day, just run into them - sometimes they are already reported, other times they are not.
Why should something that took one line of code (clicking on a movieClip
to move to a frame) now take 5 or more lines of code (creating a
listener object, assigning a listener object, writing a function).
It often happens that a language that is in the overall more elegant, consistent and compact, turns out to need a bit more of code for doing the simplest things. Maybe what could be done with 1 line of code now takes 5, but things that took 1000 lines of cumbersome awkward tricky and hacky code can now be done with just 100 of readable and simple-to-understand code.
When I first learned Java I was surprised at the quantity of code I had to write just to make a program that would print "hello world", while in most dialects of Basic it was just:
10 PRINT "Hello world"
Would you say Basic is superior to Java in any sense?
I teach Flash at a university, both beginner and advanced users. [...]
I'll stick to AS2 in my classes.
You should think about the damage you may be doing to your students. If they are going to use ActionScript professionally, they'll have to learn AS3, rather sooner than later. So why not save them the pain to do the effort twice? If instead you are teaching them AS just for didactic purposes (i.e. for learning programming in general) and don't care about practical applications and you don't like the way AS has evolved (i.e. AS3), then consider teaching them another language, instead of an obsolete version of a current one.
AS3 is not more complicated, or difficult to learn, or less designer-friendly or non-programmer-friendly than AS2. Not at all; rather the opposite. It is more complicated and difficult to learn when you already know AS2, because you feel like everything you knew is useless - but the same can be said about learning AS2 when you already know AS3. Starting from scratch, AS3 is indeed simpler.
But this have drifted OT, sorry. Back to the topic:
It's not an app killer, just a minor inconvenience
It's a major inconvenience if writing the same amount of code takes you three times the time it should take. That in 2010 you have to spell every single property/method/class name entirely from the first to the last letter, when most of the time it should be just a matter of typing a couple of characters and hit tab, is simply ridiculous. You may as well write your code with NotePad. Flash is (among other things) an IDE - something Adobe seemed to neglect up to recently; and when they finally decided to take a step into making it work like any other decent IDE, it does not work!!
There are bigger things to complain about.
On this you are definitely right.
Using their pretty remarkable products (where would we be without PS or
DW?) is not a right, it's a (sometimes frustrating) privilege.
It's a privilege you pay for. That's when it becomes a right.
So Adobe mods, we're frustrated but only because we're all loyal users who depend on your products
(emphasis is mine)
Exactly. That's the point.
Note there's been no helpful answer from them yet: that's how much they care about loyal users who depend on their products.

Audition CS5.5 is not working well with Microsoft Mouse "smooth scrolling" feature

Hi,
I'm testing with the Audition CS5.5 and found that the mouse scrolling (I use it mainly for zoom, zooming in and out to see the waveform) is just not working well and sluggish, and finally I figured out it somewhat related to the "smooth scrolling" of Microsoft Mouse. Anyone with the same problem? In fact the scrolling is working very well for Audition 3.0.1, I don't know why it fail for CS5.5.
Best regards,
Steve

The trial version is the same as the full version except
for the 30 day limitation.
I think on windows xp you need sp3 for cs5 to work as expected.
Anyway that's what is says here:
http://www.adobe.com/products/photoshop/photoshopextended/systemreqs/
That may not be the problem, but it's a good place to start.
Also it's not a good idea to post your email on the forums.
MTSTUNER

Photoshop CS5 Move Tool Not Working?

Please help. I am using Photoshop CS5 and my Move tool is not working. I just don't know what to do. I am making photobooks with a software plug-in, "Album DS", and for the last couple of months everything worked perfectly. Then, all of sudden, when I load up photos onto an album page, with the Move tool, I no longer get the crop markings around the photos to enlarge, decrease, or even move the photos. I have tried using the Move tool without the software and it still does not work.

I just figured this out 5 minutes ago, by mistake I might add. How in the world did you know this? Thanks.

Latest flash player, wmode GPU still not working in Safari

Hi
I have the latest flash player installed, (10.2.153.1) but when i use the parameter
wmode=gpu
in safari, nothing is displayed AT ALL. When right-clicking on the page, you only get the standard html options.
When I remove the 'wmode' parameter, everything works fine.
I have the latest version of safari. Everything works fine in other browsers (firefox, chrome).
any ideas anyone???
thanks!

Sometimes it is just a trial and error. The main thing is since I'm not working with your files, I have to mimic your scenario as best I can. Make sure you give it exact positions when stacking actual videos or swf files to force them to overlap. I tested this first with just a swf file and now the example is swapped to stack to youtube embeds as examples.
It really shouldn't matter if it is a dropdown or what type of activity, as long as you have the stacking correct. You can also, generally set the one in back to opaque. I updated the code snippet because this one seemed to read better.
<html>
<head>
</head>
<body>
          <div id="background" style="position:absolute; left:0px; top:0px; z-index:-50">
          <iframe title="YouTube video player" frameborder="0" allowfullscreen="true" allowtransparency="true" width="650px" height="750px" src="http://www.youtube.com/embed/FOHJUrcVdJk?amp;wmode=transparent"></iframe>
          </div>
          <div id="myDiv" style="position:absolute; left:0px; top:0px; z-index:1000;">
          <iframe title="YouTube video player" frameborder="0" allowfullscreen="true" allowtransparency="true" width="500px" height="500px" src="http://www.youtube.com/embed/FOHJUrcVdJk?amp;wmode=transparent"></iframe>
</div>
<body>
</html>

W510 - nVidia 880M - GPU throttle not working any more

Hi everybody,
my W510 (2 month old) used to throttle down the GPU from maximum performance (550/790 MHz GPU and Memory) to lower values (135 Mhz or something) when the GPU was nearly in idle mode. I don't know when it sopped working, but today I realized the GPU staying in high performance mode all the time.
I tried the things below but none worked so far:
- changing through the different power schemes
- updating the video driver with Lenovo update tool
- installing the video driver from nVidia (using clear install option)
It has to be a software issue since I can manually change the clock using a tool called Powermizer Manager. But the "Auto" mode is not working any more. I watched the GPU clock with GPU-z.
Any ideas where I might have a look? I'm currently running the most recent Lenovo video driver.
Thanks,
Andy.

This is the response from AirDisplay ==>>>
Hello,
My apologies for this issue. It's a bug we are aware of. It stems from an issue with OS X. Certain Macs that have a third party video driver installed will exhibit this issue. So, it's not just Air Display that causes this problem but other apps like Display Link, AirParrot, etc. will also have this issue. Apple has contacted us regarding the problem and they're looking into it. It's not actually something we or those other third party developers can fix. Apple has to address the issue with OS X. Hopefully they'll fix it soon.
Elliot
Customer Support
Avatron Software, Inc.
[email protected]

Flash gpu acceleration not working

I can't get gpu acceleration to work it just uses the cpu.
I've watched numerous 1080p videos windowed & fullscreen in firefox and IE on youtube, they play fine but their only using the cpu.
The only thing that i've tested that uses gpu acceleration is windows 7 media player.
E6600 core 2 duo
8800 gts 640mb
Edit: From Adobe support page....
"The desktop player still uses software rendering for this release. Software rendering is used because drivers vary widely on the desktop, and drivers can accentuate rendering differences"
Is it only for laptops ? In the release notes of my desktop driver it says gpu acceleration support for 10.1.

Same Problem with my AMD HD 7450 w/ Catalyst 12.04.
What does "GPUDevice: not available" mean? That is listet in every post here ...
Version von Lightroom: CC 2015 [1014445]
Lizenz: Creative Cloud
Betriebssystem: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Anwendungsarchitektur: x64
Systemarchitektur: x64
Anzahl logischer Prozessoren: 4
Prozessorgeschwindigkeit: 3,2 GHz
Integrierter Speicher: 16347,7 MB
Für Lightroom verfügbarer phys. Speicher: 16347,7 MB
Von Lightroom verwendeter phys. Speicher: 1340,8 MB (8,2%)
Von Lightroom verwendeter virtueller Speicher: 1367,2 MB
Cache-Speichergröße: 284,5 MB
Maximale Anzahl Threads, die Camera Raw verwendet: 4
Camera Raw SIMD-Optimierung: SSE2,AVX
DPI-Einstellung des Systems: 96 DPI
Desktop-Komposition aktiviert: Ja
Monitore/Anzeigegeräte: 1) 1680x1050
Eingabetypen: Multitouch: Nein, integrierte Toucheingabe: Nein, integrierter Stift: Nein, externe Toucheingabe: Nein, externer Stift: Nein, Tastatur: Nein
Informationen zum Grafikprozessor:
Check OpenGL support: Failed
Vendor: ATI Technologies Inc.
Version: 3.3.13283 Core Profile Context 14.501.1003.0
Renderer: AMD Radeon HD 7450
LanguageVersion: 4.40
Anwendungsordner: C:\Program Files\Adobe\Adobe Lightroom
Bibliothekspfad: Y:\LR5_Katalog\LR5_Katalog-2.lrcat
Einstellungen-Ordner: C:\Users\mmphotographie\AppData\Roaming\Adobe\Lightroom
Installierte Zusatzmodule:
1) Behance
2) Canon Tether-Zusatzmodul
3) Facebook
4) Flickr
5) HDR Efex Pro 2
6) Imagenomic Portraiture
7) Leica Tether-Zusatzmodul
8) Nikon Tether-Zusatzmodul
Config.lua-Flags: None
Adapter Nr. 1: Anbieter : 1002
    Gerät : 6779
    Subsystem : 32001682
    Version : 0
    Grafikspeicher : 1008
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Lautsprecher (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: LR5x102
Direct2DEnabled: false
GPUDevice: not available
OGLEnabled: true

Serial number of CS5.5 is not working for acrobat pro!

Hi,
I installed the whole CS5.5 Master Collection on my MacBook Pro, typed in my serial number and everything was fine. But when I opened Acobat Pro the Application Manager asked again for the serial number. When I typed it in it was wrong. Every Adobe program is running whithout a problem, only Acrobat is not working.
What can I do?

Did you download or install Acrobat X separately? You cannot, you must use the CS installer.

CS5 site setup not working

I recently installed the CS5 version of Dreamweaver. When the program starts, I click on "dreamweaver site..." and the site setup dialog box pops up. "Unnamed site 2" is high lighted in blue. The only thing I can click is the folder Icon, help, save, and cancel icons. Nothing else works. I cannot click on Advanced Settings, Servers or Version Control. Does anybody know whats going on and how to fix this?

I am also having the same problem. If I persist on clicking 'Advanced Settings' it will sometimes open but then I am unable to click on the 'Default Images folder' option and the 'Browse Folders' icon does not work. I can also not get to the other options with the mouse, such as 'Local Info', Cloaking' etc.As the previous person said, using the Tab and Cursor keys does work, but the mouse does not.It is only in Dreamweaver CS5 that I am having this problem.
I too have a new Wacom Intuos 4 Tablet, just in case that could have anything to do with it.
Running Windows 7 64bit with CS5 and all updates completed for everything including the Logitech mouse.
Thanks in advance to anyone who can help.

Cs5 serialnumber does not work

CS5 serial number does not work after new installation. Operating system is booted and CS 5 was not deactivated so.
What can I do?

A few questions:
Which operating system version are you using?
What message are you seeing indicating that the serial number is not working? Please share the text or even better a screen shot.
Feel free to email me the information at [email protected], or edit the screenshot to not show information such as your serial number before posting.

Re: CS5.5 GPU Hack - Not Working?

Similar Messages

Maybe you are looking for