Re: CS5.5 Not rendering

I was working on my mini movie and I was rendering as I went along. I saved it and came back to it to add more but now it won't render the stuff I did before. I clicked render effects, nothing, I clicked render entire area nothing.
Edit: I'll be a bit more specific, in that there are bits that aren't green, they are yellow. It lags slightly with the yellow bits but everything else plays properly.

>bits that aren't green, they are yellow
You might read http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html for more information

Similar Messages

After Effects CS5 not rendering properly

I've just rendered an After Effects comp in .mov format, from two source .mov files, a mask and a null object. Trouble is, of the 1:30 or so total time of the video, around 1:00 is stuck on a single frame, after which the video resumes from the point where it *should* be. I've checked and double checked all the settings, and everything seems to be OK. This is the first time this has happened to me while using AE; I'm unsure what to do.

As luck would have it, it now works. I just had to change the output format from QuickTime (.mov) to H.264@300kbps. Still haven't figured out the cause of the original issue; by the way, the RAM preview worked perfectly well, which is what surprised me most.

Illustrator CS5 drop shadow - blur not rendering correctly

I just got a new computer and have installed Illustrator on it. This is my first time using the program on this computer. I created this file on my old computer in Illustrator. When opening it today, in the newly installed version of CS5, the drop shadow blur effect is not rendering properly. However, as you can see in the screenshot, one of the words has a proper blur. Everything else does not! Anyone know what to do, short of re-installing the whole program? Red arrow is the problem drop shadow. Purple arrow is the drop shadow that blurred correctly.

Well it must be something wrong on this new computer, I can't figure out what. Whenever I do a new iteration of a drop shadow it doesn't render the blur. For example, the one below- the first "Tune in" is from the original document, created on my other computer. The second "Tune in" is what happens when I try to alter it in any way, including deleting the old drop shadow and adding a new one.

Server-side includes not rendering

Hi, I'm on CS5.5 (Windows operating environemnt). The server-side includes are not rendering in Live view now, whereas they were previously. Is this some sort of configuration issue, if so can you help me fix it.

What testing server setup do you have? Are you using something like WAMP?
What do you see on screen which tells you the SSIs are not rendering? Any error message?

Selective footage not rendering!!

Hi,
I have a 5 min video and when rendering, it displays a slow preview as it renders, everything looks fine there, but when I look at the rendered .avi, there are two layers which are not rendering, even though they appear in the preview and everything works fine when I view the footage inside AE.
I have tried several combinations of rendering and none seem to work. The only similarities that share the two sections which wont render properly, are added effects and keyframes to their effects, but there is another layer which has effects too and that one renders fine.
I will gladly provide any needed information that you may require in order to get more information regarding this issue. As I have stated before, I have tried a lot of combinations, the final one being with everything set to "Current Settings" and with Open GL on anf off.
Thanks!!
Windows 7
After Effects CS5

**UPDATE**
The first layer which would not render had a Mask inside which did nothing, I deleted that and it seems to work now.
The second layer had it's opacity down to 8% --__-- '
What really bugs me is that while I'm playing the video inside AE or even watchig the preview as it renders, it shows differently that how it ACTUALLY looks like!!
Anyway to fix this, or do I just have to live with it?
Regards.
Issue #1: Solved.

Adjustment Layer not rendering...

I have a fairly basic comp consisting of 3 or 4 3d layers spaced out along the Z axis, two precomps containing some edge lighting effects, a camera, a light, and the troublesome adjustment layer. The adjustment layer only contains some color correction and a flare. I thought perhaps a certain effect may be causing the layer not to render, but i eliminated that possibility by removing the effects i had and trying several other, the layer was still not rendering. I think I have exhausted all of the really simple solutions, nothing is solo'd, all the layers are visible in the preview, the layers are all in the correct order etc.. I can't SS the project right now as I am not at home, but i can tell you that I am working with CS5.5, on windows 8.1, i5 cpu, 8 gigs of ram. The really frustrating part is that a slightly earlier version of the project successfully rendered the adjustment layer and I don't remember changing anything major... Suggestions? Shots in the dark? Anything? I will post a SS later in the day. Thanks in advance to any and all who have advice.

No problem! Glad to help.
Don't forget to mark the solution as correct, so that future forum visitors see this thread as solved. Keep having fun with After Effects and let us help if you get stumped again.

Styles not rendering in edit mode

I have Contribute CS5. When I view a page in non-edit mode in Contribute, the page renders with the appropriate styles. When I put it in edit mode, some syltes render, some do not. The styles do show for selection in my style drop down list. Can anyone tell me what the issue might be? This is disconcerting for our users.

I am using multiple style sheets, but the styles that are not rendering are in the last style sheet called. I think I pretty much have determined that the rendering engine in Contribute cannot do some styles (perhaps after a certain CSS version number?). For instance it would not render font-variant:small caps. I had this in my h1 style declaration. But it would render color:red; on that same h1 as an experiment I tried. It also won't render background images.

Effects not rendering on output to AME

1920x1080 BMD sequence. 1080i-60i
Mac 10.6.4
APB CS5.5.2
Exporting to AME queue
Creating a Prores file, full quality.
Effects like drop shadow not rendering out in the file.
Clearly there in the sequence.
Any help greatly appreciated.
Thanks.

Another reason for PP to add native monitoring without third-party hardware/drivers. Please add your voice...
http://forums.adobe.com/thread/900221?tstart=0

Preview is not rendering fonts well in PDFs

Hi,
For some reason Preview is not rendering fonts well in PDFs. I have created high quality PDFs using two applications (Illustrator CS5 and Numbers '09) and in both cases the fonts are not rendering correctly in Preview. They generally look much less sharp. I am attaching screenshots below, with the original image first and then the PDF in Preview.
When I look at the same PDFs in Acrobat Pro the fonts look fine, so I am presuming that the issue is with Preview. Does anyone have any idea what might be going on?
Thanks,
Nick

It looks like, at least in the Navigation menu, that your using Palatino font, which isn't a web safe font. So Explorer is probably substituting another font when it finds fonts not installed on the viewers computer.
You may be using the default font in a particular iWeb theme. These aren't necessarily web safe fonts.
For your pages to look better on most computers, change all your fonts to web safe fonts which you can find in the "font inspector window" in iWeb. (there is a "font" button on the bottom edge of the main iWeb window) There, you will find different categories of fonts, you want to use any of the fonts listed under "Web" group of fonts.
David

JSF Pages are not rendering correctly when loaded using Non JSF actions

Hi All,
This problem is irritating me and I am posting the same query for the third time here.
When I come from non jsf actions such as page submitting using Javascript, clicking anchor link, clicking normal Html submit button and so on my page is not rendering correctlly .
In other words, My first GET method/Post method works perfectly for the first time when the page is loaded.
But when we try to access the page for the second time, although logical work is perfect in bean, I am getting same old page.
How to resolve this issue?
or
Is this Bug of Sun's Implementation of JSF Framework.
Thanks,
Sudhakar

Hi Sudhakar,
There is a discussion about refreshing a page, Take a look at the below thread
http://swforum.sun.com/jive/thread.jspa?threadID=55660
Hope this what you are looking for
MJ

Why is my .psd file not rendering correctly in ae

Some layers of the .psd document are not rendered correctly. However they are imported.
The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
I am kind of clueless as to what is causing this issue.
Kind regards,
Jelle

Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
Further details:
-photoshop cc and after effects cc.
-macbook pro retina
If still not clear enough, please tell me what details you are looking for furthermore

SSRS report does not rendering properly in sharePoint 2013

Hi everyone,
I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
expected, some data mix-up on the matrix table
The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
Window server 2008 R2 with service pack 2
SQL server 2012 enteprise with service pack 2
SharePoint 2013 (no service pack) with integrated mode on the report service
Visual Studio 2010 development tools
I'm very appreciate for anyone can provide any solution to solve this issue.
Thank you so much,
Dac.
P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
But the Indent on IE and summation still persist in both browsers.

Hi everyone,
The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table.
Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
matrix table ... and the summation showed correct (it's so weird)
For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
Could someone can enlighten me please?
Many thanks.

LIbrary thumbnails not rendering

I have dozens and dozens of thumbnails in library grid that do not render. The boxes show up as empty grey squares with keyword icons among others. There does not seem to be any pattern or reason that some photos render fine and others do not. If a photo is taken to develop mode then the thumbnail renders as the photo loads in the main window, otherwise the same photos that are all grey in library view are grey in develop view until the individual photo is loaded. Closing LR and reopening it seems to cause any photo which was originally not rendered but then forced to render in develop to go back to the unrendered state.
This is driving me crazy as I cannot count on LR to display the images I have in the catalog. Syncing a folder which has many of these unrendered previews does not indicate any missing files.
Help.
Lightroom 3.2 64 bit
Windows 7
Catalog w/ about 18000 images upgraded from LR 2.7

Check other threads in this forum. I recall this is usually caused by a bad display colour profile. This is apparently more common with some Windows systems.

Inserting new row in Table in 11.1.2 from 11.1.1.3 not rendering table!!!!!

Hey Guys, my status might say noob but i am well seasoned in ADF. We migrated from 11.1.1.3 to the new JDEV 11.1.2. We are doing a test run before we commit to it.
I noticed the following:
We have master detail forms that work flawlessly in 11.1.1.3 when we ran the app under 11.1.2 we noticed that any time you try to add a new row to a table the table does not render. The server logs show the action going through and the count goes up one but the table is not rendered anymore it disappears!!!!!!!!!!!!!!
Now all of this was imported from the 11.1.1.3. all of our tables that have createInsert actions on them are doing this.
If i drag the tables again and set them up from scratch it seems to work fine. Our issue is we have a good 300 of these tables in different panels and panel collections. we have to do all of that work all over again.
No errors show in the log. IS THIS A BUG???????????????
UPDATE: REFRESHING THE PAGE using the Browser Refresh Button Will show the new ROW....... THIS IS NOT GOOOD!!!
Edited by: user8333408 on Jul 7, 2011 9:23 AM
Edited by: user8333408 on Jul 7, 2011 9:24 AM
Edited by: user8333408 on Jul 7, 2011 10:08 AM

Thanks for the reply.
The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
Basic Page layout:
SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
the panel collection has a toolbar with 2 buttons in it.
My issue varies:
Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
other tables do the following:
Hit Create insert == > table shows normally and I can enter new record.
Hit undo ==> table count goes down but table does not render at all anymore.
for this issue i noticed if i set cache results to false the table works after hitting undo
IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
NO ERROR MESSAGES even at finest level are thrown.
I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
Edited by: Nottallah on Jul 11, 2011 9:48 AM
Edited by: Nottallah on Jul 11, 2011 9:51 AM

Safari not rendering a page correctly

A webpage I created in Dreamweaver uses drop down menus that are supposed to display just to the left of the link they drop from. In all other browsers they work correctly, but since the latest upgrade in Safari to 3.0.4 as a part of OS 10.4.11 on my Macbook, they are not rendering correctly. Instead they are appearing much further to the left where it's difficult to move the cursor to them before they disappear. Until I changed the color of the drop downs they were disappearing into the background. Any ideas why Safari is not rendering them correctly? I'd like to keep Safari as my primary browser, but if it won't render my own page correctly, what other pages might it be messing up? Address of the page is http://www.montgomeryschoolsmd.org/schools/woottonhs/ The drop downs are connected to the central column list that has small arrows beside the words. They will probably work correctly for you, but won't for me in Safari. What can I do to fix it?
Thanks,
KWolfrey

Hi,
I'm running 10.4.11 with Safari 3.0.4 and as far as I can see the menus seem to work just fine here.
Do you have a custom stylesheet set in Safaris advanced preferences? (Some Safari enhancer applications set one even if you didn't manually set one so double check to make sure.)
Also, do you use PithHelmet?
One quick test you can do to help narrow down things is to try Safari in another user account. This will help us to know whether your problem is local to your account or system wide. If you don't have another account you can use System Preferences -> Accounts -> \[+\] to create a test one (and \[-\] to remove it if needed)
Lastly, I doubt these [errors|http://validator.w3.org/check?uri=http%3A%2F%2Fwww.montgomeryschoolsmd. org%2Fschools%2Fwoottonhs%2F&charset=%28detect+automatically%29&doctype=Inline&g roup=0] have anything to do with your problem since it seems to work fine for me, but you might want to look into them at some point.

h:messages tag not rendering right

Hi All,
I have an <h:messages /> tag in my jsf page and it's not rendering correctly.
This is the tag in my page, verbatim:
<h:messages />
And this is the output when validation errors are created:
Validation Error: "lastName": Value is required. Validation Error: "firstName": Value is required.
That's it. No List, no nothing, just space-delimited validation errors!
When I specifiy layout="table", things are fine, but specifying layout="list" doesn't solve the problem.
I'm using v1.1 of the jsf implementation.
What gives?
Thanks,
John

I got the exact same problem.. Is this already logged as a bug in JSF?

Re: CS5.5 Not rendering

Similar Messages

Maybe you are looking for