RE:Database Upgradation in multi node .

Hi,
Our database is on 2 node and our Applications(Concurrent and Report Server) also on both node.
PCP is configured and Load balancer is also configured.
Kindly let us know how to proceed database up gradation.
Regards .

Please post the details of the application release, database version and OS.
Our database is on 2 node and our Applications(Concurrent and Report Server) also on both node.
PCP is configured and Load balancer is also configured.
Kindly let us know how to proceed database up gradation.Upgrade from what database version to what version?
The upgrade process should be similar to a single node upgrade.
Thanks,
Hussein

Similar Messages

EBS R12 multi node architecuture upgrade

Hi,
Could any one let me know the approach for 2 node rac and 2 node application upgrade. I am clear about the database upgrade, but could any one let me know, do I need to upgrade r12 as a single node and then copy the upgraded binaries to second node and run autoconfig? It will be help full if someone shares the document to upgrade ebs on multinode architecture.

Could any one let me know the approach for 2 node rac and 2 node application upgrade. I am clear about the database upgrade, but could any one let me know, do I need to upgrade r12 as a single node and then copy the upgraded binaries to second node and run autoconfig? It will be help full if someone shares the document to upgrade ebs on multinode architecture.You have to upgrade the multi-node installation the same way you upgrade a single node installation. You need to run Rapid Install and the main upgrade patch driver on each node (each node where APPL_TOP is presented).
I do not think there is a document just for multi-node installation as it is similar to single node installation.
Thanks,
Hussein

MW 2.19 multi node upgrade patching fails on second, third, etc node.

When using Maintenance Wizard 2.19 with multi-node configuration patching will fail after the first node with an error in the adpatch log that states invalid options as seen below.
"AutoPatch warning:
Ignoring unrecognized option: "options".
Connecting to APPS......Connected successfully.
AutoPatch error:
You must be in Maintenance Mode to apply patches.
You can use the AD Administration Utility to set Maintenance Mode."
Please update this forum if you hit this issue and I can send you the fix until Maintenance Wizard 2.20 is released.
Thanks

As requested here's a paste of the command log, I can just see entries for the admin node and not the forms/web node.
Many Thanks
INFO - Help on monitoring when multiple drivers and nodes are applied.
If the web window times out, click on the x and rerun it to view the updated log
file. It will change as the patch continues to run in background. Just keep marking it
success until it is complete or check the active patch node manually:
$ tail -f $APPL_TOP/admin/${TWO_TASK}/log/patches_PRE_1703_1_patchit11i*.log
Each node, if multi-node, will be determined and the patch drivers will be applied
on the right nodes in the right order. Look for the ACTION: statement.
ACTION: execute on node: apps , patch=patches_PRE_1703_1 driver=u_merged.drv
patchit11i.sh REMOTE SIZE: 47535 LOCAL SIZE: 47535
OK - no update needed for patchit11i.sh, same size as on EOF: 47535 bytes.
Found release REL=11.5.10.2 from fnd_product_groups.
Starting adpatch for: patch=patches_PRE_1703_1 force= driver=u_merged.drv
Using defaults file /u10/orafun/appl/admin/FUN/adalldefaults.txt.
Starting patch with the following command:
/u10/orafun/appl/ad/11.5.0/bin/adpatch defaultsfile=/u10/orafun/appl/admin/FUN/adalldefaults.txt logfile=patches_PRE_1703_1_patchit11i.log patchtop=/u10/orafun/appl/patch/patches_PRE_1703_1 driver=u_merged.drv workers=6 interactive=no options=hotpatch,novalidate,nocompilejsp,nocompiledb,nomaintainmrc,nogenerateportion restart=n
Confirms adpatch is not still active, and views Check patch log times.
... PROCESS LISTING of adpatch
... ls -l of patches_PRE_1703_1_patchit11i.log to see date/time stamp
-rw-r--r-- 1 orafun dba 53761 Aug 30 14:41 /u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
... last 20 lines of log file: /u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
for details.
Purging timing information for prior sessions.
sqlplus -s APPS/***** @/u10/orafun/appl/ad/11.5.0/admin/sql/adtpurge.sql 10 1000
Done purging timing information for prior sessions.
AutoPatch is complete.
AutoPatch may have written informational messages to the file
/u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.lgi
Errors and warnings are listed in the log file
/u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
and in other log files in the same directory.
SUMMARY - patchit11i.sh - Completed application of patch: patches_PRE_1703_1, driver: driver=u_merged.drv
OK - adpatch completed successful.
INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
Redo the Action
Completed Successfully Post Hour Minute

Create New Oracle R12 Server with multi nodes and migrate the Production Data on it ?

Good Day,
I have New Task and I don't know how to start.
Am working on Oracle Application 12.1.3
And Database 11.2.3
OS Redhat Linux 6.1
My Production Server have the database and the application on the same Server (Single node),
I want to create another 2 Servers with same Operating system to separate the application and the Database to be each one on separate server (Multi Nodes),
And Migrate the Production Server Data on It?
And i need to know how many days it will takes because we are live now ?
Regards

Install the OS on the new servers -- Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
Use Rapid Clone to move the application/database to the new server.
Rapid Clone Documentation Resources For Release 11i and 12 (Doc ID 799735.1)
Cloning Oracle Applications Release 12 with Rapid Clone (Doc ID 406982.1)
For the duration, it depends on the size of your application/database and how long it takes to copy the files.
Thanks,
Hussein

How to run all Concurrent Requests in a single node in a multi node env

DB;11.1.0.7
Oracle Apps:12.1.1
OS:Linux 86x64 Red Hat
PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?
Thanks for your time!
Regards,

PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?Concurrent requests will be processed by the CM nodes and it has nothing to do with the 3 web tier nodes you have.
If you mean the database instance, then please see these docs.
How to run a concurrent program against a specific RAC instance with PCP/RAC setup? [ID 1129203.1]
In A PCP/RAC Configuration, How To Find Out On Which RAC Instance FNDSM Is Currently Running? [ID 1089396.1]
Thanks,
Hussein

10.2.0.4 database upgrade

DB:10.2.0.4
OS:Linux
I have a 2 node RAC 10.2.0.4 database and i am planning to upgrade it to 10.2.0.5 using dbua utility. For upgrading do i need to shuut down one instace and initiate the dbua from the node where one instance is running or it is not required. do i need to make the cluster_database=false or it is not required when using dbua.Please give me the steps or can you please tell me document link.

Hi
http://practicaloracle.com/2011/07/10/rac-database-upgradation-from-10-2-0-4-0-to-10-2-0-5-2/
Please refer
Re: 10.2.0.4 to 10.2.0.5
Regards
Hitgon

How to setup multi node installation

Hi all,
I have successfully installed Oracle E-Business Suite 11.5.10 in a single node.
But, I would like to get some suggestions on How to perform the multinode installation in which all the application tier servers in independent nodes?
If the nodes are placed in different places geographically, how can I move all these nodes in to a single network? Is this possible?
Please guide me.
Thanking in advance
Rameshkumar

1. Is it right if I assumed that we must check that
box if we want to install apps tier in more than one
server so that if we only want to install apps tier
in only one server then we don't need to check that
option? Or we better check it even no matter how many
server we installed apps tier into? You only need to check that box if you intend to used a shared application tier filesystem for a multi-node installation. If you are only going to have one app tier server, you don't need to check the box. If you plan on multiple apps tiers, each with its own copy of the application tier file system, you also don't need to check that box.
2. If I still uncheck that option will there be any
problem such as in backup & restore, clone, testing
activity, etc?No, should not be any problem at all.
3. When we created user for each db tier and apps
tier, what will be better, create the same user for
both tiers or differentiate user for each db tier and
apps tier? I'm thinking of using same user for both
tiers to avoid privilege problem later on.
I'd recommend the same user for application tier files on all nodes in the system, and a different user for database-tier files. For example, in our system the database software (RDBMS ORACLE_HOME) and database datafiles are owned by 'oracle', and the EBS application files (APPL_TOP, forms and web server, etc) are owned by a user called 'applprod' (though of course you should choose a user name that makes sense in your environment.
4. Can we start clone process in db tier and apps tier >paralel in multinode environment or still start clone >process in db tier first then apps tier?Still need to do the db tier first, since 'adcfgclone.pl appsTier' will want to talk to a database. :-)
Regards,
John P.
Message was edited by:
jpiwowar (forgot to answer the 4th question the first time, whoops)

Clone multi-node RAC and ASM to single node

Hi everyone.
I need clone system with 3 application server and 2 oracle database RAC and ASM to single-node. The operating system is RHEL 5.
I see some metalink notes, but we can't found nothing. I find notes with multi-node to single-node, but nothing with RAC to non-RAC.
The eBS version is 11.5.10.2 and database version is 10.2.0.3
Is possible this clone?
Thanks very much.

Hi User;
Please follow below and see its helpful:
EBS R12 with RAC and non-RAC
Re: RAC to single instance ebs R12
Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
Re: CLONING R12 RAC to NON RAC CLONING giving error RMAN-05517 temporary file
[b]Migrating the DB-Tier (DB and CM) to Two node non RAC cluster[/b]
Also check:
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html
Regard
Helios

Oracle 10g multi node installation

Hi,
Multi node installation for Oracle 10g Appl Server
- Node A: Install core business Database server.
- Node B: Install Application Server Infrastructure (OID, repository database).
- Node C: Install Application server middle tier (forms, reports, portal, discoverer, java) at node C. must specify the OID server (node B). And configurre tnsnames to access database server (node A).
steps for this. Any doc or link
Thanking you
regards,

As simple as you mentioned.
1.- Install db in node A
2.- Install Infra in node B, you will get a servername and port for OID (look on $OH/install/portlist.ini to get it), and the password, usually the same as for the System and Sys users for the repository.
3.- Install Apps in node C, even if you install infra and apps in same node, the installer will always promp for the OID server name and port wich I mentioned earlier.
4.- Configure node C tnsnames to access node A
Hope this helps
Greetings.

R12 Single node to Multi-node Configuration

Hi All!
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.
Thanks and Regards,
cmadiam82

Hi,
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.Contratulations. This is a good oppurtunity.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.For a start you can read
http://gjilevski.wordpress.com/2009/12/13/rac-enabling-ebs-12-1-1/
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=52&MMN_position=44:44
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=61&MMN_position=57:57
Thanks

11.5.10 multi-node instalation

Hi,
I'm trying to install 11i on Oracle Linux in multi-node mode. I have two servers (fin-01 and fin-02) and decided to use fin-02 for DB and CM, fin-01 for the rest. Installation starts on fin-01. But System Check Status showed in 'Database Install Check', that "RW-40000: Warring: Unable to establish a Database connection. Please make sure the database is up before continuing with this install. Connection string used - jdbc: oracle:thin: @fin-02.domain:1521:VIS"
Is that means, that I need to install DB before?
regards,
Krystian

Hi;
You need to start installation from db tier.Please see:
multinode installation steps
multinode patch
Regard
Helios

Migrate Single Node 11.5.10.2 --- to --- Clustered Multi Node

Dear All
I have a project to migrate a single node 11i EBS to Clustered Multi-node
& I opened Thread under (Forum Home » E-Business Suite » Technology - LCM: 11i Install/Upgrade)
the URL is
Migrate Single Node 11.5.10.2 --->> to --->>> Clustered Multi Node
Please if you can help me updating that thread with your answers.
Best regards
Naji ghanim
Apps DBA
TAGITI

Dear All
I have a project to migrate a single node 11i EBS to Clustered Multi-node
& I opened Thread under (Forum Home » E-Business Suite » Technology - LCM: 11i Install/Upgrade)
the URL is
Migrate Single Node 11.5.10.2 --->> to --->>> Clustered Multi Node
Please if you can help me updating that thread with your answers.
Best regards
Naji ghanim
Apps DBA
TAGITI

How to switch production single node EBS environment to multi node?

We're considering moving our production EBS environment from single node to multi node to separate out the middle processing from the database. We've completed the steps via clone (adcfgclone.pl) in out test environment and are now testing, however we're leery of running the same process in production. I've researched this process greatly, but most links point to either multi to single or cloning. Please assist.

Use Rapid Clone -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
All the steps are covered under "Cloning a Single-Node System to a Multi-Node System" section.
Thanks,
Hussein

Identify to which mid-tier you are be connected on a multi-node R12 env

How can we identify to which mid-tier we are be connected on a multi-node R12 environment through backend
Do someone have a handy script to get the details of the connected sessions on each middle-tier node

hi
user481019 wrote:
How can we identify to which mid-tier we are be connected on a multi-node R12 environment through backendFND_NODES table contains information about node_names and services enabled on a node.
In multinode instance if you want to know which node is running what services, You can query the fnd_nodes and get that information.
Do someone have a handy script to get the details of the connected sessions on each middle-tier nodefnd_logins
fnd_user
v$process
v$session
REM
REM It's configured to work with SQL Directory (SQLDIR).
REM SQLDIR is a utility that allows easy organization and
REM execution of SQL*Plus scripts using user-friendly menu.
REM
REM
REM File:
REM a_user_ses_R11i.10.2.sql
REM
REM <SQLDIR_GRP>APPS APPS_ADMIN USER MOST</SQLDIR_GRP>
REM
REM SQLDIR Group Descriptions:
REM     APPS     -     APPS General
REM     APPS_INST     -     APPS Installation
REM     APPS_CONC_PROG     -     APPS Concurrent Programs
REM     APPS_CONC_MAN     -     APPS Concurrent Managers
REM     APPS_ADMIN     -     APPS Administration
REM     DBF     - Data Files
REM     TABSP     - Tablespace
REM     UTIL     - Utility
REM     INDX     - Index
REM     LOG     - Redo Log
REM     RBS     - Rollback
REM     MAINT     - Maintenance
REM     REVERSE     - Reverse Engineering
REM     SGA     - SGA Maintenance
REM     TAB     - Table
REM     USER     - User Management
REM     STATS     - Statistics
REM     STORAGE     - Storage Management
REM     INIT     - Database Init Parameters
REM     LATCH     - Latches
REM     LOCK     - Locks
REM     SEGMENT     - Segment Management
REM     BACKUP     - Backup Management
REM     PQ     - Parallel Query
REM     TRACE     - SQL Tracing Tuning
REM     PART     - Partitioning
REM     MOST     - Favorite Scripts
REM
REM
REM
REM
REM Purpose:
REM <SQLDIR_TXT>
REM     This script reports APPS active middle-tier sessions
REM     (works with newest 11.5.10.2 framework)
REM </SQLDIR_TXT>
REM
REM Usage:
REM a_user_ses_R11i.10.2.sql
REM
REM Example:
REM a_user_ses_R11i.10.2.sql
REM
accept 1 prompt "Enter the type of sessions you'd like to report on web: "
set lines 132
set trims on
col db_pid format a6 heading "DB-PID"
col mt_pid format a6 heading "MT-PID"
col sid_serial     format a16 heading "USR:SID,SERIAL"
col apps_user format a12 heading "Apps User"
col apps_logon_time     format a15 heading "-- Apps --|Logon Time"
col mt_detail     format a15 heading "Middle Tier"
col mt_start_time     format a15 heading "-- M-Tier --|Logon Time"
col module     format a10 heading "Module"
col action     format a35 heading "Module Detail"
alter session set nls_date_format='MON-DD HH24:MI';
select /*+ ORDERED */
p.spid db_pid
, s.process mt_pid
, s.username||':'||SUBSTR(s.sid||','||s.serial#,1,15 ) sid_serial
, fl.start_time apps_logon_time
, fu.user_name apps_user
, s.machine||'.'||s.osuser mt_detail
--, logon_time mt_start_time
, substr(module,1,10) module, action
from fnd_logins fl
, fnd_user fu
, v$process p
, v$session s
where decode('&&1','web',fl.spid,1)=decode('&&1','web',s .process,1)
and fl.pid=p.pid
and fl.process_spid=p.spid
and fl.serial#=p.serial#
and s.process is not null
and s.paddr = p.addr
and fl.user_id=fu.user_id
and fl.end_time is null
please see this
https://forums.oracle.com/forums/search.jspa?threadID=&q=Connected+users&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
;) AppsMAsti ;)
Sharing is Caring

O/S Patch, H/W, S/W Upgrades, Database upgrades, patches - Exadata Platform

Platform: SUN ODM
Topic: Patching/Upgrades
I would like to know various available options that we can use to do.
1. H/W Upgrades
2. Patch Upgrades
3. S/W, Database upgrades/patching, Hot/Online patching
Because its a RAC envt, we have an option of doing node-by-node upgrades but will be interested in knowing best practices. (recommended by Oracle)

user1175306 wrote:
Platform: SUN ODM
Topic: Patching/Upgrades
I would like to know various available options that we can use to do.
1. H/W Upgrades HW is fixed, there are no options to add or upgrade components in the individual servers.
2. Patch UpgradesPatches for Exadata software are available via My Oracle Support. The installation procedures for each Exadata software upgrade are detailed in the patch's readme.
3. S/W, Database upgrades/patching, Hot/Online patchingMost patches are rolling-installable and most Exadata software upgrades are rolling-installable too. You should utilize the MAA best practices and whitepapers that describe how to minimize downtime for patching and upgrades via Data Guard and other techniques (http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm)
>
Because its a RAC envt, we have an option of doing node-by-node upgrades but will be interested in knowing best practices. (recommended by Oracle)

RE:Database Upgradation in multi node .

Similar Messages

Maybe you are looking for