Re-dating photos now does not re-date events. Bug?

Hi,
I have been progressing through all my old scanned negatives, importing them into iPhoto '11, organising them into 'events', and then re-dating them using Photos>Batch change...
This had been working perfectly until today. The re-dated photos automatically placed the events they were within in their correct chronological order.
But today, even though I am re-dating ALL the photos within an event, (I have double-checked), the events themselves stubbornly remain with the date value of the original files, which is the date the negatives were originally scanned of course.
When I do the batch changes I make sure that 'Modify original files' is ticked.
Yesterday I accepted an update to iPhoto '11 version 9.1.2 (605). Could this have anything to do with my problem? Has anyone else got the same problem after updating to version 9.1.2?
If this is likely to be the cause, is there any way of reverting to my previous version?

As well as the re-dating problem in the 9.1.2 update, I also found that they have messed up the scroll facility somehow.
Whenever I scrolled through a view in 9.1.2, be it events or photos, instead of scrolling relatively smoothly the view seems to suddenly jump. I found myself getting completely lost...
So, what with the scrolling problem, and having to do the workaround for the re-dating problem, I'm very unimpressed with 9.1.2. The only plus point it had, (that I found, anyway), was that the single-photo zoom facility was extended to all views and not just within the 'edit' one. The disadvantages far outweigh the advantages as far as I'm concerned.
I have now reverted back to version 9.1.1, and I can now get on with the job in hand far more effectively.

Similar Messages

6233 Photo transfer does not include date

I successfully transfer photos from my 6233 to PC via both Bluetooth and data cable but the date which comes across with the image is the file transfer date and not the date that the image was taken. The correct image date is stored against the file in the phone. Is there a setting in the phone to enable the 'date taken' to also be transferred ?

Brother, the modified date)after you save the photo on your PC) should contain the created date(unless you have modified the photo after copying it). There are really small softwares on the net(for free ) that should set the created date to the modified date on your laptop and also some which would rename according to the modified date.

How can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it? iPhone 5, iOS 7

how can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it?
iPhone 5, iOS 7

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

HP-photosmart 6280 all-in-one with osx 10.9 now does not show options for printing photos from the photo tray.

Using osx mavericks on macbook pro. My printer for HP-photosmart 6280 all-in-one now does not show options for printing photos from the photo tray.

What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Photo Downloader does not detect Thunderbolt connection. Help!

I am using Bridge CS5.1 on MacBook OSX 10.8.3. I bought a Seagate Thunderbolt Adapter which works with 2.5" eSATA hard drives (Seagate Backup Plus). Instead of connecting a 2.5" eSATA to this Thunderbolt Adapter to my Mac, I am doubling this thunderbolt connection as a CF card reader by swapping the eSATA portable drive with a CF to eSATA Adapter instead. Photo Downloader does not detect anything connected through thunderbolt!?
When the CF card or portable drive is connected via the TB adapter, it appears in Bridge and Finder. The Canon's Image Browser (Memory Card Utility) detects only the CF card (not the portable drive) as a Camera and downloads the images from the CF card via the thunderbolt adapter with no issues. I would prefer Bridge to download the images due how the folder names are created by Bridge. (I have been using Bridge for few years now and dont want to change the naming convention. Can't seem to find a way for Canon to name it exactly the same as Bridge. It does YYYY_MM_DD amd I cant get rid of the underscores in Canon's software)
How can I get Photo Downloader (File: Get Photos from Camera...) on Bridge CS5.1 to detect the Thunderbolt connection as a Camera?
Excuse my messy desk, here's a pic of the set up with the CF card plugged into the CF to eSATA adapter : and onto the Seagate TB Adapter. and the TB cable goes into the Mac

It works perfectly well. My issue is getting Adobe Bridge 5.1 to recognise the CF card via thunderbolt in photo downloader.
Despite having bought a MacPro just a few months ago I still have no Thunderbolt connection so i can't confirm this.
I do know Photodownloader has not changed a bit since it was presented long time ago and definitively needs a lot of improvement.
It is very possible that Photodownloader is not capable detecting thunderbolt connections and Canon software doing so does almost proof APDL does not do so.
You can try to dive in the user library (by default hidden, use menu Go and press option to reveal it) and in the folder preferences find and delete the Photodownloader plist file manual.
restart photodownloader and try again.
The other option is to use a USB 3.0 or Firewire (both also pretty fast).
The third option is to use Bridge itself for renaming the files you imported manual. Using the sort order creation date and batch rename use the option for shot date (yymmdd-number or other info) and either organize with stacks or create folders.
There is also a nice app (not free but cheap called 'big mean folder machine" from the same team that offers 'A better finder rename'.
Both offer plenty of options that makes life easier, such as producing folders with specific naming and order in no time

AddOnsLocalRegistration.sbo file does not match data in the common datab...

We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
Thanks for any help.

Hi Vaughn.........
I guess you need a re installation of Outlook Integration Addon.
Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
Regards,
Rahul

0EC_PCA_3 does not return data in RSA3 if the target system is entered

Hello all,
Datasource 0EC_PCA_3 is not transferring data to the BW 7.0 system. In the ECC 6.0 system datasource 0EC_PCA_3 does not return data in RSA3 if the target system (BWDCLNT100) is entered in the selection fields. When omitting the target system all expected data is returned.
Datasource 0EC_PCA_1 works fine for the same target system.
There is one thread dealing with the same problem but the person does not provide the solution he found.
Does anyone know what the issue is?
Regards and thanks,
József.

The problem was solved by removing the datasource in both BW and R/3 and activating everything from scratch again. We didn't find out what was the cause of the problem, but at least it is working now.

Upgrade to media source 5 and now does not recognize my Zen Touch player!?

JUpgrade to media source 5 and now does not recognize my Zen Touch player!
st off, I was having issues with mp3's transferring to my zen touch, it would say file cannot transfer, invalid format or something of the like.. The creative audio converter would not allow the file to be converted as it said the source was not availble, all odd as the files worked fine on my computer and were mp3 format. I did get them to transfer after downloading another 3rd party converter, I wanted to get past using another program though so I updated to media source 5, along with firmware updates to most recent for the zen touch.
Once I had updated it would not recognize my player, I opened version 3.xxx whatever and it did recognize. Thinking maybe it has an issue with both being installed I unistalled the old version. Same problem, still does not see my player. I upated the driver for the player as well, and my computer now could see the zen touch instead of unknown usb device, media source 5 no go still at this point. I opened windows media 0 and it saw the player and I could transfer files, but the lay out and editing cababilities are limited.
Basically I want to know what to do get this thing detected so I can use media source 5 to organize my files. Someone please help me.

N Oh how I love the beauty of forums! Fantastic. So you know the fix went for my issue here, I had already upgraded the zen/jukebox driver to version 2.0 to no avail, and did not get the play for sure firmware as it says all data will be lost, but I did upgrade with the other option on the support downloads section before as well to no avail. Thanks to?GuyGraham, after I installed the app update for Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer it works once again!! I just do not see how this file isn't included with the media source 5 application in the first place. Either or thanks a lot you guys, problem sovled!

Time capsule now does not work with Lion just installed.

Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?

Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords.

Submit MC.9 does not retrieve data in background processing.

Hi,
Im submitting transaction MC.9 in one of my programs. The submit statement seems to retrieve data when the program is run in the foreground, but when the program is scheduled to run in the background the submit statement does not retrieve data.
kindly advise,
regards.
Message was edited by:
sheldon barretto

Hi Tushar,
Thanks for ur reply.
I tried wat you asked to, but no spool was generated for the job. In SM37 it says that the Job (RMCB0300) is completed, but theres no spool list entry.
Does it mean i cant run MC.9 in background.
regards,
Message was edited by:
sheldon barretto

I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?

I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?

You can't simply change the details.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

Same issue here, previously did work perfectly

CFGRID does not show data (CF9.0)

Under development server, CFGRID show data , all is fine , correct. (CF9.0 version dev)
Under production server , CFGRID does not show data, only a grey line (like a HR).
How to debug this ?
Thanks,

Kindly check below to troubleshoot this issue:-
Is there any difference between your CF production & developement server setting summary?
Is there any browser script level difference between your both CF server?
Are you getting any relevant logging error in your CF server application.log & exception.log?
Run a very simple cfgrid running app to check, either getting issue with that too or not.

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless Confused that it did work and now does not?

My Ipad did work on my wireless at home and works on other wireless but no longer at home. My IPhone works at home and others can use the wireless> Confused that it did work and now does not?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
 Cheers, Tom

Re-dating photos now does not re-date events. Bug?

Similar Messages

Maybe you are looking for