RE: DEACTIVATING INTEGRATION MODEL (IM) IN BACKGROUND

G'day Team,
The CIF IM's can be deactivated using CFM2 and deactivate logic: click inactive & "Start".
Does anyone know whether this process can be run in the background using ECC RIMODAC2?
Points awarded for feedack.
Andy Gosling
07792367572

HI Andy,
You can use the program RIMODAC2 in background. Create the background job where there should be two steps.
1- Activation of IM --RIMODGEN
2- Deactivation --RIMODAC2 - Put -MODEL --LOGICAL SYSTEM and APO application .
Regards,
MJ

Similar Messages

Deleting an Integration Model.

hi Guys
if any kind of changes happens in master data in ECC then we transfer that data in SCM,then what happens with that planning data with which we work earlier.
And Deleting an integration model does not mean that the previously selected data in APO is also deleted.what happens of that data.
thank u
karan
Edited by: karan.sap on Feb 27, 2010 6:36 PM

Hi Karan,
1) if any kind of changes happens in master data in ECC then we transfer that data in SCM,then what happens with that planning data with which we work earlier.
As and when you activate an integration model, a new integration model gets
generated and the earlier one will get deactivated. (provided the model name,
model selection criteria are same). That means the newly changed master data
will get activated to SCM system in which the old change is obsolete.
2) And Deleting an integration model does not mean that the previously selected data in APO is also deleted.what happens of that data
Whenever a new model gets generated, the old model will be there in the system
only and that inactive models needs to be deleted at frequent intervals orelse
it will add inconsistency to the system. This will be done using CFM7 transaction
by selecting inactive models indicator. Whether the old model is deleted or not, but
system always will read and plan as per the newly activated model.
Regards
R. Senthil Mareeswaran.

Integration model activation issue - After Prod to Quality refresh of R/3

Hi Guys,
Our R/3 quality system refreshed from production. Hence all the integration models Logical system pointing APO production system. Mistakenly I deactivated all the integration model in R/3 Q system which having APO Production logical system.
All the IM in R/3 quality system are inactive. When try send material getting error message "relavent location doesn't exist".
For that try to move the Location getting error message "Location already exist in APO Quality" system.
Now I want to active the all the Plant, material.etc integration models. Please let me know if any more information and help to overcome the issue.
Thanks,
Saravanan V

Saravanan
Make a table level change and set the integration model flag as active in the table CIF_IMOD. This will help you solve the issue .
Go to transaction SE16 . Give table name as CIF_IMOD. Give the name of you integration model and execute . Now all versions of that integration model will be displayed ( this will happen if you have many inactive versions and do not have the RIMODDEL program to delete inactive IM's) . Choose the latest version and go to change mode and set the value of "Entry is active" (technical name ACTIVE) field to I.
You can take help from development team if you do not have authorization to SE16
Thanks
Saradha

Destination system cannot be used for classic qRFC by activating integration models

Hi All,
I am trying to connect ECC Release 702 to SAP TM 8.0 but by activating integration models(CFM2) i got following runtime error:
Error analysis
    Short text of error message:
    Destination TMCLNT100 cannot be used for classic qRFC
    Long text of error message:
    Technical information about the message:
    Message class....... "SR"
    Number.............. 320
    Variable 1.......... "TMCLNT100"
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
any one has idea how to solve that?
Thanks a lot!
Kind regards
RW

RW,
I am definitely not an expert on SAP Transportation Management. However, maybe your destination system has been set up as bgRFC instead of qRFC?
bgRFC (Background Remote Function Call) - Connectivity - SAP Library
Best Regards,
DB49

Reactivating integration models

Hello All,
I deactivated a big sales order integration model in my production system. While trying to reactivate the RIMODAC2 program is taking huge time(30 mins) to complete for 5 part-plant combination. I have around 100K part-plant combinations.
Is there a short cut to reactivate? If there is some alternate program to somehow reactivate the models.Any help will be greatly appreciated.
Anyone ever had such a situation? Any ideas.
Thanks and regards
Sanjeev

Hi Sanjeev,
There is no short cut but I can explain you a way.
First please confirm that only one transaction data integration model was inadvertantly deactivated.
Second - the steps I mention below should be carried out with "care" and after notifying business users suitably as you have to do this when there is mimimal activity in the system.
Broad steps:
1. Stop the CIF Queue by going into /SAPAPO/OM17
2. Activate the sales order integration model
3. There should be queues created inbound to your SCM/APO system (check in SMQ2)
4. Wait till all queues are created for the Sales Order Integration Model and make sure you see the CIF_GEN_EVENT queue (last queue which after going to SCM system returns to R/3 ERP system and marks the Integration Model as active)
5. Delete all the CIF queues for the Sales Order Integration Model except the CIF_GEN_EVENT queue.
6. Start the CIF Queue - the CIF-GEN_EVENT queue should process
7. Confirm that the Integration Model is activated in R/3
8. Run Delta Report (/SAPAPO/CCR) and resolve any differences
Disclaimer: This is not a SAP documented solution.
Hope this helps and works out for you.
Thanks,
Somnath

Transaction for activate the integration model

hi,
i created integration model using cfm1 transaction , how to activate the model ? in which transaction.
regards
muthuraman.d

Hi Mathuraman,
you can use the transaction CFM2 to activate your generated Integration Model. This transaction is used both for activation and deactivation of the Integration model.
For Initial transfers you can use the program RIMODINI also.
Let me know if it helps.
Regards
Gaurav

Materials not in integration model

Something has happened in my R3/APO Development system where lots of Materials are not in any Integration Model. They should be, and checking in our prod system they are.
I've de-activated and re-activated Int Models but to no avail.
How can I check/update materials to be part of an Integration Model?

For material master integration, the indicator in MARC table should be set properly. During the integration model activation if the MARC table is locked for some reason, this does not happen.
Pl. refer to the following reports
RAPOKZFX - Set APO indicator in MARC table after activation
RCIFIMAX - Consistency between integration models and MARC table
RCIFMTDE - Log the deactivated material masters
Hope this helps!

Problem activating integration model

Hi,
      We have a integration model for Purchase orders and Purchase requisitions, PLanned orders, Manual reservations and production/process orders.
In CFM2, when I activate, it is taking forever to activate.
Here is what I see in CFM2 details:
POs and PReqs     (2.503 no.s)
Planned Orders     (2.503 no.s)
Manual Reservations     (2.503 no.s)
Production/Process Orders (2.503 no.s)
The system has a clock moving in the left bottom corner with the message "Transfer Model type : Purchase orders and purchase Requisitions) and it's taking forever.
I checked this [thread|Problem with activating integration model]. I don't have access to BD22.
ANy other ideas on how I can complete this activation?
Are 2503 too many??

Hi Visu,
Can you split the intregration model for each object and schedule the activation in background through CFM3.
if there is any failure can see problem through SLG1.
Manish

Integration Model got cancelled

Hi,
We are running the deactivation or activation of integration model in Program.if any SYSFAIL(Example: SQL error) occur in E.C.C outbound queue suddenly the active integration model has got fail.please guide me on this.. Why this happend and solution for the above?
thanx,
C.Parthiban

Hi,
-Go to transaction /SAPAPO/CQ check the Q no.
-Go to SMQ2 or SMQ1 (depending on Direction flow)
-Check for SYSFAIL entries
-by Double clicking go in and try to analyse the Q error .
Before activation of any integration model normally you should make sure that CIF Qs are clear.
Regards
Samir

Integration model generation

Hi,
We have a integration model for master data- Schedule lines and contracts. We have a background job that generates and activates the model. If I regenerate the model in CFM1, does it hurt anything for the job?
I think every time you generate a model, a new model will be generated right? Does this cause any discrepancy?
Thanks.

There are two types of sending data to APO through CIF
1) Sending only changes (Delta)
2) Sending everything (Delta+ New creation).
Considering there are three materials which changed on a certain day then just activating the IM model will work perfectly fine.
If along with three materials there was also an addition of a brand new material in R/3 . Then only by generating the Integration model will not help .
You will have to delete the original IM and recreate the same IM by using variants then activate the IM. By doing so it will consider as a initial transfer and send all the three old materials and the brand new material changes to APO.
If you feel it is useful pelase reward points.
The reason behind this behaviour : When you try to activate already existing IModel, then it only activates those objects which are already been generated and present during the generation of the IM.
So if a new material is created you will need more than just to generate. You will have to delete the model, generate the model, activate the model.
Thank You
My
Thanks,
My

Dump is program RIMODAC2 - Activate/Deactivate integration model

Hi APO guyz...
Background job of program RIMODAC2 - Activate/Deactivate integration model fails with following error "TSV_TNEW_PAGE_ALLOC_FAILED"..
Can somebody tell me what is the reason behind that and how can we resolve it...
Thanks a lot !!
- D

job in failed with a memory space problem or too many orders are read.Generally when reading large datasets of the table a short dump occurs with message TSV_TNEW_PAGE_ALLOC_FAILED.
Please rerun the IM model , it will resolve the issue or split IM data into 2/3 IM so that volume is distribute which may resolve your problem.
Also if IM is set up for all the object together , please split IM for individual object.
If problem still persist than check for OSS message.
Note 903715 - Initial data transfer: TSV_TNEW_PAGE_ALLOC_FAILED
Note 137932 - Short dump TSV_TNEW_PAGE_ALLOC_FAILED in LCOIAU05
Manish`

System copy:integration models altered

Hi SCM experts,
We have APO 4.1 connected to ECC system.Recently the QAS data is refreshed with PRD data and after that all CIF integration model variants in QAS are pointing to PRD system. There are more than 100 integration model variants and changing the logical system mnaualy to QAS client is taking long time.
Is there any standrad report or t.code by means of which we can do a mass maintenance of these integration model variants ?

Hi deeparai,
You can change the name of logical system in ECC table CIF_IMOD. However, the integration models will not become active unless you generate them again (CFM1/2/3).
Hope this helps in reducing manual work.
regards,
biplab

CIF - Integration model name and APO application

Hi Experts,
In the CFM1 Transaction, there are 3 mandatory inputs are Model name, Logical system and APO application.
Logical systems are customized in CFC1 transaction. I couldn't trace the model name and application creation.
What is the transaction to customize/Create the new Model name and APO application.
Hope this is very simple question to you and expect your soon.
Thanks,
Saravanan V

Hi Somnath,
Thanks for ur reply.
First I saved the selection as variant. But it was not updated in the IM table.
Then I tried to generate the model and now I can see the details when I use the F4 help.
So, to create a integration model need to generate the variant once.
Thanks for the confirmation.
Thanks,
Saravanan V

Transfer of material from R/3 to APO, Problem in Integration model

Hi
I have created Integration model for Transferring material from R/3 to APO.
While activating the model, it is giving error with status as i..e. SYSFAIL
On clicking the status, I am getting the following message
"Logical system R3CON does not assigned to Business System Group"
?Where to locate the BSG in R/3 and assign before transferring matl to APO
i require the steps&help to solve the problem.
Thanks in advance to all members for the help.
Srikanth

Dear Srikant ,
Pls check you have followed the below steps in the same sequence for R3 and APO
CIF Settings in R/3
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Assign target system and queue type CFC1
Maintain the SAP APO release NDV2
Activate BTEs for SAP APO integration BF11
User parameters for CIF CFC2
CIF Settings in APO
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Set up business system group
Create BSG /SAPAPO/C1
Assign logical systems to BSG /SAPAPO/C2
Maintain distribution definitions /SAPAPO/CP1
User parameters for CIF /SAPAPO/C4
You have got stuck up somewhere in R3 setting , which I have marked in italic font i.e.Assign target system and queue type CFC1
I hope this will solve your problem .
Thanks ,
Digambar

Not able to include PM order type PM03 in integration model

Hi Experts,
I am creating PM order in R/3 with order type PM03. But while creating the integration model for maintaince order, PM03 is not populating. and others I am getting like PM01, PM02 etc...
Please advise if I need to do some setting for the same.
Thanks
Hitesh

Hi,
Request you to cross check whether the PM03 order type has the below two check box active in IMG. 9 Tcode = OIOA
Open Item Management and Release Immediately.
PM03 order type with the above settings are getting reflected for me in my integration model.

RE: DEACTIVATING INTEGRATION MODEL (IM) IN BACKGROUND

Similar Messages

Maybe you are looking for