Re-deploying Essbase application with EPMA version 11.1.2.
Hi everyone.
We recently upgraded to Hyperion Planning 11.1.2 and we are also using EPMA 11.1.2.
EPMA 11.1.2 is significantly different from 11.1.1.3 in several key respects, including the new synchronization functionality. What we're struggling with is figuring out how to re-deploy Essbase and Planning applications from EPMA. We've been able to deploy them the first time, since then we've made changes in the dimension library and we want to now re-deploy these modified Essbase cubes out to the Essbase server. In the old version of EPMA 11.1.1.3 I would just right click on the application in the App Library and select "Deploy | Refresh" and it would go do it's thing. Now in 11.1.2 EPMA, when I right click nothing happens. HELP!
Tom
Hi Tom,
Frankly speaking, I did not get when you said that nothing happens when you Right click the application in the App library.
Ideally, you would see the options as is, with certain options like " Validate, Deploy, Open" etc to be disabled.
You might need to provide the Application Manager role for the user for that particular application and then re-launch EPMA to view the enabled options.
Then, on right clicking the application and select Deploy option, you would view the options so as to perform a Re-deployment.
Thanks and Regards,
Vipin.
Similar Messages
-
Errors deploying Planning application to EPMA
Hello,
We have successfully migrated our v4.02 planning application over to v11.1.1.1 and upgraded it successfully. However, we I attempt to to deploy the application witin EPMA the following errors are received:
Validation Log
==============
Job Id: 26
Created : 4/9/2009 5:36:38 PM GMT
Application :SDSPlan
Validation Summary
==================
Result : Failure
Summary : There were 89 errors and 0 warnings during the validation process. For details refer the error and warning section of this log.
Error Details
=============
Error : Attribute dimension "01a Rents" is associated with 0 base dimensions or has 0 associations to the same base dimension. It should be associated exactly once with only one base dimension.
Error : Attribute dimension "02a Property Tax" is associated with 0 base dimensions or has 0 associations to the same base dimension. It should be associated exactly once with only one base dimension.
Error : Attribute dimension "03a Equipment Leases" is associated with 0 base dimensions or has 0 associations to the same base dimension. It should be associated exactly once with only one base dimension.
Error : Attribute dimension "04a Copier Paper" is associated with 0 base dimensions or has 0 associations to the same base dimension.
I am currently reading the EPMA Admin documentation but i am not finding the resolution. Can anyone please give me some insight / direction.
Thank you,
TonyHi,
To associate an attribute dimension with a dimension you will need to do this in EPMA.
Go to the application in EPMA and to the dimension library (you can right click the application > edit)
Right click the dimension you want to an attribute associated with > "Create Association" > Select Attribute from the property dropdown.
Select the attribute dimension from the dimension dropdown.
To associate an attribute member, click on a dimension member and in the property section you can click Attribute and select the member.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi,
I tried everything I could find on the internet but no luck so far. I can successfully deploy MS Visio 2013 to the clients. I also want to be able to uninstall it from the clients. On the client machine Uninstall button is greyed out. This deployment is
installed as "Available" and there is only one deployment type within that MS Visio 2013 Application.
I tried the following uninstall commands in my deployment:
setup.exe /uninstall
setup.exe /uninstall
VisPro
/config .\vispro.ww\uninstallvisio.xml
“\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe” /uninstall VisPro /config "\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml"
\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe /uninstall VisPro /config \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml
I checked Product ID from Setup.xml and I know it is correct. My uninstallvisio.xml' content is below:
<Configuration Product="VisPro">
<Display Level="basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
Last night, I downloaded and installed Cumulative Update 1 for SCCM 2012 R2 and I haven't tried the deployment after the update,yet. I will try it today but please let me know what else to check.
Yavuz Selim AtmacaAfter I updated SCCM Server and test client pc with CU1 , I tried to deploy visio as Required. It installed successfully. Then I uninstalled visio by deploying the application with Uninstall Action.
After that I tried to deploy visio as "Available" to see if Software Center Uninstall button works. However visio deployment does not come to Software Center's Available Applications List. I check the status of the deployment under the Deployments monitoring
node and it says Success "Already Compliant". I dont know what it means. Does config manager thinks that visio already installed?
Yavuz Selim Atmaca
2 or 3 hours later that -Succes "Already Compliant"- status of the deployment under the Deployments monitoring node is vanished automatically and Software Center application list showed the new deployment. I installed it and uninstalled it succesfully.
So, you are right Solution is the CU1 but I am still wondering why my available deployment took so time to be visible in Software Center althought I didn't enter any schedule to be available.
Yavuz Selim Atmaca -
How to Deploy J2ME applications with data in RMS?
Hello everyone,
I am designing a J2ME application, a simple "Who wants to be a millionaire game". It stores questions and answers from a rms datastore. I want to to how can I deploy this application with questions and answers in the recordstore. Each time I run the emulator, the data stored previously gets deleted. Is it possible to attach the rms recordstore along with the .jar or .jad files? If so how can I do it. Please help.
Thank you all in advance.Thank you Sypress.. When I install it the code works fine. But I wanted to include data with the application. I think I found a way way. I added the data in a text file and while starting the application I inserted data from the file into the recordstore.
-
The error when I deploy ess application with SDM
SOS!!!when I deploy ess application with SDM(ESS05P_1-10002965.sca), It failed.please help me.
The trace file:
#1.5#00145ED221BE00F7000000B90011A07C0004421B32EEBBA8#1198584492898#com.sap.engine.services.webdynpro.WebDynproContainer##com.sap.engine.services.webdynpro.WebDynproContainer#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/UserInterface#Java###Failed to deploy application '''' for deployment state listener ''''.
[EXCEPTION]
#3#sap.com/essauaddr#com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook#com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to deploy the file '/usr/sap/EP1/DVEBMGS02/j2ee/cluster/server0/./temp/webdynpro/public/sap.com/essauaddr/webdynpro/Applications/com.sap.xss.hr.per.au.address.Per_Address_AU/Per_Address_AU.xml' into the database. Reason: Development Object 'sap.com/ess~au' contains already same repository content. Hint: fully qualified name of the repository VMO must be globally unique.
at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.checkVMOsExistInOtherDC(RepositoryUpdateManager.java:504)
at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.deployRepositoryContent(RepositoryUpdateManager.java:98)
at com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook.onDeploy(RepositoryContainerHook.java:232)
at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1007)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:552)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#00145ED221BE00F7000000BB0011A07C0004421B32EF7CEE#1198584492948#com.sap.engine.services.deploy##com.sap.engine.services.deploy#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in operation deploy with application sap.com/essauaddr.#2#deploy#sap.com/essauaddr#
#1.5#00145ED221BE00F7000000BC0011A07C0004421B32EF7F24#1198584492949#com.sap.engine.services.deploy##com.sap.engine.services.deploy#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception in operation deploy with application sap.com/essauaddr.
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:394)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:294)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:552)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Cannot deploy application sap.com/essauaddr.
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:330)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
... 13 more
Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1016)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
... 15 moreCheck these below links
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4611860
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4562067
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4258751
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4474525
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4543091
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4368694
reward points if helpful -
How to deploy cairngorm application with FTP support?
Hi,
I have a cairngorm application, it works fine in my local
computer.
But I need to upload it to a website in my web hosting
company with FTP,
but it doesn't work in the hosting server because I can not
add the cairngorm.swc file to the application.
Please give me a idea how to deploy the application with ftp
software.
Thanks a lot
MarkAny opinions are welcome
-
Cannot use this version of the application with this version of MAC OSX
When I try to download the new beta, I get a message that says: cannot use this version of the application with this version of MAC OSX
I'm new to Macs, but I installed all the software updates and that still didn't help. I dont have to buy a new operating system do I?Muse requires Mac OS X 10.6 or later.
http://muse.adobe.com/tech-specs.html -
does anyone have an idea on how can i load essbase applications to EPMA?
Thanks,
HansonIn this case you would have to first load the entire outline of the ESSBASE application in EPMA and then modify the properties accordingly (if reqd).
The entire outline can be loaded to EPMA through a textfile , by going into the dimension library and selecting: file - import profile
Thanks
Fahims -
Deploying APEX application with web host
Hi guys,
Whats the process of deploying APEX application with a webHost?
We got a good deal from a web host with dedicated database, it still being processed.
Currently we have a domain name hosted elsewhere (non APEX host) . What I am planning to do is, create a subdomain with our existing web host and point it to the IP address of the DB machine the apex host will give us.
So I am guessing the process will involve:
1) getting the IP address of the database machine
2) configure the my existing web hosting setup to create a sub-domain and make it point to the IP address (for example 174.184.223.441)
Would I need Port number of the machine running Oracle DB with APEX and the local IP address (the one starts with 10.0.0.xxx) etc?
Would be grateful if someone can share what you did given you already have a domain hosted and need to create a subdomain to make it point to another APEX host.Hi Jim,
Try to replace,
<jnlp spec="1.0+" codebase="http://localhost:8080/fileviewer" href="index.jnlp">
with
<jnlp spec="1.0+" codebase="$$codebase" href="index.jnlp">
But i was using JNlpdownload servlet to do the task
Regards
Leo -
Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?
I can't help you with a direct answer. For third-party devices you should contact the vendor (Vodafone).
If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service. -
"You cannot use this application with this version of OS X"
Hi,
I'm getting this message when I try to open .AVI files that I uploaded from my digital camera, but I'm posting it here instead of in the Quicktime section because I believe that the cause of the problem is more general. When researching this problem, I looked at the info panel for these .AVI files, and the app listed to open them was "Quicktime Player (default) (7.1.3)". But the actual version of Quicktime that I have installed is version 7.4. If I set the file's "Open With" app to be "Quicktime 7.4", it opens fine, but the "Open With" app reverts back to "Quicktime Player (default) (7.1.3)", making the problem come back. I've also noticed that if I right-click on other apps (a PDF file, for example), and choose "Open With" from the popup menu, that I see other versions of apps that no longer exist on my machine (Safari 2.0.4, for example). I think that files associated with these older app versions may be the cause of many of the "You cannot use this application with this version of OS X" issues that have been reported here. My question is where is this list of "installed" products maintained in OS X, and is there a way that I can edit it to remove those product versions that no longer exist on my system. In my particular instance, I'd like to remove "Quicktime 7.1.3" which should allow me to set the associated app for my .AVI files to be Quicktime 7.4 with no possibility of the association reverting to an earlier version that's not only incompatible with Leopard, but also not installed on my system.
Thanks,
KenWhen you associate a file with an application, are you then clicking the "Change All" button? You can rebuild the LaunchServices database. Evidently the location of the command and the database have changed slightly in Leopard from what they were in Tiger. See this thread for the updated instructions:
http://discussions.apple.com/thread.jspa?messageID=5730491
Also, make sure you don't have the old applications archived somewhere. I've been astonished in the past at just how enterprising the system can be in finding some program squirreled away in an obscure backup folder and listing it as an option to open something.
Francine
Francine
Schwieder -
Error deploying the application with Crystal Report
Hello,
I'm using Visual Studio 2010 and I installed the required version of crystal report for it. I'm developing a windows Application with C# and Crystal Reports. The program runs correctly in the visual studio but when I tried to deploy it by adding the setup it gives me the following warnings:
- Unable to find dependency 'MICROSOFT.VISUALSTUDIO' (Signature='B03F5F7F11D50A3A' Version='1.0.5000.0') of assembly 'crdb_adoplus.dll'
+- The 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' item selected requires 'Microsoft.Net.Framework.2.0'. Select the missing prerequisite in the Prerequisites Dialog Box or create a bootstrapper package for the missing prerequisite. +
- No 'HomeSite' attribute has been provided for '.NET Framework 2.0 SP2', so the package will be published to the same location as the bootstrapper.
I tried to ignore the warnings and deploy it but when I try to open the crystal report and in the program it gives me an error message then an empty report.
I also tried in the Prerequisites to choose the option : Download prerequisites from the same location as my application. but when I do that I receive the following errors:
- The install location for prerequisites has not been set to 'component vendor's web site' and the file 'MDAC28\mdac_typ.exe' in item 'Microsoft Data Access Components 2.8' can not be located on disk. See Help for more information.
- General failure building bootstrapper.
- Unrecoverable building error.
of course In addition to the previous error.
I'm not using the click-once deployment.
Can you please help and advice me with that? I tried to search through the net for these warnings but with no luck of the solution.
Thank you,No, .Net Framework 2 is not installed. I'm using windows 7 so I installed .Net framework 4. I tried to Install .Net 2 but it doesn't install because of windows 7. I also tried to add it in the prerequisites but again with no luck in solving the issue.
If I try to deploy the App and install it. When I try to open the crystal report the app crushes and gives me the following error:
Report load failed.
exceptions:
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at DataViewer2.Form5.crystalReportViewer1_Load(Object sender, EventArgs e)
at System.Windows.Forms.UserControl.OnLoad(EventArgs e)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Edited by: starrysky88 on Sep 13, 2011 11:35 AM -
Deploying portal application with jdeveloper
Hi all
I am new to portal applications. I have followed the documentaion (http://download-west.oracle.com/docs/cd/B10464_03/portal.904/b13922/pdg_java.htm#CHDFDDBG). I am getting the following exception when I deploy the example in the doc with jdeveloer. I am using jdeveloper 10.1.2 with portal extention and ias 10.1.3.2.0 on windows.
C:\product\Jdeveloper\jdk\jre\bin\javaw.exe -jar C:\product\Jdeveloper\j2ee\home\admin.jar ormi://machine.us.oracle.com:12401/ oc4jadmin **** -deploy -file C:\product\Jdeveloper\jdev\mywork\Scratch\portal1\deploy\portalprofile.ear -deploymentName portalprofile
Error: Unexpected error during lookup : Lookup error: javax.naming.NoPermissionException: This operation was denied. The admin.jar utility can not be used to perform operations against OPMN managed OC4J instnaces. Please use Enterprise Manager instead. Refer to the Oracle10iAS Admin Guide or the OC4J User's Guide for more details.; nested exception is:
javax.naming.NoPermissionException: This operation was denied. The admin.jar utility can not be used to perform operations against OPMN managed OC4J instnaces. Please use Enterprise Manager instead. Refer to the Oracle10iAS Admin Guide or the OC4J User's Guide for more details.
Exit status of OC4J admin tool (-deploy): 1
java.lang.NullPointerException
at oracle.jdevimpl.deploy.Oc4jRemoteAdmin.getServerVersion(Oc4jRemoteAdmin.java:57)
at oracle.jdevimpl.deploy.Oc4jCommandLine.deployEar(Oc4jCommandLine.java:231)
at oracle.jdevimpl.deploy.Oc4jRemoteDeployer.deploy(Oc4jRemoteDeployer.java:64)
at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:53)
at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:53)
at oracle.jdevimpl.deploy.J2eeProfileDt$CleanupTransientProfilesDeployer.deploy(J2eeProfileDt.java:125)
at oracle.jdevimpl.deploy.FinalDeployer.deploy(FinalDeployer.java:48)
at oracle.jdevimpl.deploy.AsyncDeployer$1.runImpl(AsyncDeployer.java:63)
at oracle.jdevimpl.deploy.AsyncDeployer$1.run(AsyncDeployer.java:49)
Elapsed time for deployment: 4 seconds
Even I tried directly deploying the ear file but I am getting 403 error when I access the application.
ThanksHi
I just tried it again. It's not asking me to activatie the chages in ADMIN Consle I don'tknow why?
All the internal applications of WC_CustomPortal are up and active!
Applications - DMS Application , wsil-wls and wsm-pm
But Jdeveloperdeploy to Server fails with error
[11:24:15 AM] Entering Oracle Deployment Plan Editor
[11:24:19 AM] Deploying Application...
[11:24:20 AM] [Deployer:149191]Operation 'deploy' on application 'University_application1 [Version=V2.0]' is initializing on 'WC_CustomPortal'
[11:24:21 AM] [Deployer:149193]Operation 'deploy' on application 'University_application1 [Version=V2.0]' has failed on 'WC_CustomPortal'
[11:24:21 AM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application University_application1 [Version=V2.0] on WC_CustomPortal.: .
[11:24:21 AM] Weblogic Server Exception: weblogic.management.DeploymentException:
[11:24:21 AM] Caused by: java.lang.ClassNotFoundException: oracle.webcenter.lifecycle.listener.FeatureMetricApplicationListener
[11:24:21 AM] See server logs or server console for more details.
[11:24:21 AM] weblogic.management.DeploymentException:
[11:24:21 AM] #### Deployment incomplete. ####
[11:24:21 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Regards -
Problem deploying an application with more task flow
Hi all,
I am using Jdeveloper 11.1.1.0 and weblogic 10.3.1
I am trying to deploy an application that has more task flows.
I am in the home page and I click on a button and I go to a new task flow.
If I run the application from Jdeveloper it works, but if I deploy the application and try to do it I have this error on the page .jspx:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
and this error on the server log:
servlet failed with Exception oracle.adf.controller.security.AuthorizationException:ADFC-0619: Can't check authorization at:
'/myFolder/calledTaskFlow.xml#myViewActivityoracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure<AuthorizationEnforcer.java:147>
oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission
oracle.adf.controller.internal.security.AuthorizationEnforcer.checkRead
oracle.adf.controller.internal.security.AuthorizationEnforcer.getTaskFlowDefinition
oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.findTaskFlowDefinition
What's the problem?
Thanks
Edited by: user10799119 on 2-set-2009 6.27I have not understood well what you mean: "Its better you create an EAR profile, have proper ADF Security set up in Jdev with users and roles, and also proper roles and permissions assigned to taskflows, and then deploy the profile directly from JDev."
I have proper ADF Security set up in Jdev with users and roles, and also proper roles and permissions assigned to taskflows, and then deploy the profile directly from JDev. After that I have deployed my application to EAR file. I am using the EAR file create by default by Jdeveloper. Is this correct? Or have I to create another profile?
"If you still wanna deploy the EAR, check the Users and Roles section under security in the Weblogic console. Users and Roles need to be configured in Weblogic as well. In 11g they get deployed automatically but with any previous version of Jdev you might have to check this in the WLS console."
In the weblogic console, clicking on Security realms --> myRealm --> providers, I have defined myAuthenticator
I am using Jdeveloper 11.1.1.0 and web logic server 10.3.1, so it seems to me that users and roles get deployed automatically
what have I to do?
thanks -
Failed to deploy web application with same name twice
Hello-
On Oracle 10g Application server I deployed an WAR file called "anbadmin", then undeployed it. The undepoloyment failed from the OEM so I undeployed it manually via removing its entries from server.xml.
When I tried to deploy it again with the same name I got this:
Failed to deploy web application "anbadmin". Failed to deploy web application "anbadmin". . The evaluate phase failed. The Adapter used in the evaluate may have thrown an exception.
Resolution:
Please call Oracle support.
Base Exception:
java.lang.NoSuchMethodError
null. java.lang.NoSuchMethodError
Is there a solution for this?
RegardsI think I know the solution. We encountered exactly same message and no further deployment could be made. It appeared message in "dcmctl" utility was much more helpfull than the one in EM (though you still have to use "getError" command...)
If you are using file-based repository, you have to issue command in dcmctl utility "resetFileTransaction". This closes repository and opens it again.
Myrra
Maybe you are looking for
-
How do I get this download to resume. Followed all previous istructions.
-
Re: Read Only Entity Bean
I am trying to convert an entity bean into a read only bean . I am not sure how it works ? I read the documentation and it said that I had to set the following parameters cache-strategy>Read-Write</cache-strategy> read-timeout-seconds>100</read-timeo
-
Currently having issues when closing and/or rearrange palettes. System locks, can't force quit, keyboard commands aren't recognized, but mouse pointer can me move around screen. Only solution, so far, is to hold the power button and reboot MacBook Pr
-
How do I transfer music from iPod to iPod
How do I transfer music from iPod to iPod and I don't have windows on my MAC. I don't want to have to load everything again onto the new ipod.
-
I have a problem. I recently uninstalled Pro CS4, reinstalled it, downloaded the latest updates. Now a project in the timeline is damaged. About half of the clips in the timeline now start and stop at the wrong point, their in/out points have been ch