Re: Device Manager - Other Device "PCI Data Acquisition and Signal Processing Controller"

I have the same problem and I am not good at PC
Can you  show me , in detail , of where can I download that driver please?
Solved!
Go to Solution.

in that case, let's start over.
what OS are you using?   is this under a clean installation of windows or a factory installation from lenovo?   what device is missing a driver?   what lead you to think you needed the above driver?
please be as specific as possible.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

  • Pci data acquisition and signal processing controller -Device software not installed

    My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed  on my Device manager.
    Please suggest me a suitable solution.

    No its not working , Give me an alternate solution.

  • Z600 workstation missing pci data acquisition and signal processing controller driver

    I just installed Win7 Pro x86 on my Z600 workstation.  It was an upgrade from WinXP Pro.  In Device Manager I am missing the driver for the PCI Data Acquisition and Signal Processing Controller and Hardlock USB 1.02.  Can someone assist me in finding these drivers.  I looked on the Support/Drivers page for this  model but couldn't find anything.
    This question was solved.
    View Solution.

    Hi,
    You might get better assistance on the HP Enterprise Business Forum since you have a professional worktsation.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

    Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

    Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver.  Click on the driver tab. Click on Update driver.  Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

  • PCI Data Acquisition and Signal Processing Controller driver

    I've installed win 8.1x64 on my HP Probook 450 G2 but I am missing the PCI Data Acquisition and Signal Processing Controller driver.
    Can you please help?
    Thanks,
    Leontina
    This question was solved.
    View Solution.

    Hi:
    Please see if installing the Intel Chipset driver installs that device.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

  • E5-571 PCI Data Acquisition and Signal Processing Controller & SM Bus Controller

    I upgraded from Windows 8.1 to Windows 10. Windows Update says that it is up-to-date. Windows Devices Manager shows a problem with two devices: PCI Data Acquisition and Signal Processing ControllerSM Bus Controller What are these devices and where do I locate the drivers for them?

    That should do it. I've been pleasantly surprised by how well older drivers are working in Windows 10. I had to install Vista 64bit drivers for an ATI video card (the latest working drivers for the card) and they actually worked!

  • T450s - pci data acquisition and signal processing controller

    I am installing a fresh build of win 8.1 and I cannot seem to find this driver. Anyone know what this is?

    please install Intel Chipset driver. I fixed mine with it!
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

  • Lenovo 14 20DM correct driver for 'Data Acquisition and Signal Processing Controller'

    Hi Everyone, I am the happy owner of a new Yoga 14 20DM. A few days ago I made the decision to upgrade to Windows 10. Whilst the upgrade went smoothly I did have to install a number of drivers manually. At the moment I am stuck on trying to install the 'PCI Data Acquisition and Signal Processing Controller' (as shown below).  I have tried right clicking on the device then selecting Properties > Driver (tab) > Update Driver > Search automatically for updated driver software, however doing so only shows the screen capture below!  Furthermore I have searched the Lenovo support page for a suitable driver however none is available! http://support.lenovo.com/au/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga-14/20dm?TabName Finally I have also installed, and run, 'System Update 5' the software program available from Lenovo. However it was not able to install a correct driver for this device. I have done a little searching on this topic, and have read a couple of stories about people installing an incorrect driver for this device, and then experiencing blue screens! Can anybody suggest how I can go about locating and installing the correct driver for this device? Any help will be greatly appreciated. Kind Regards, Davo

    Hi Ingemann, Ultimately I decided on the newest version of the Intel Chipset Device Software (INF Update Utility), which at this time (on the Intel website) is version 10.0.27. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- Interestingly enough I was presented with the message below when I ran this executable.  I selected Downgrade (with some trepidation), and after rebooting was pleasantly surprised to see that the troubled device was missing from the list. I can only assume that this means the correct drivers were installed. Thanks you very much for your help. Kind Regards, David

  • Driver missing - PCIe Data Acquisition and Signal .....

    Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro.
    All the drivers are working (so far) and i haven't encountered many problems.
    However, there is one thing bugging me:
    When i go into Device Manager in Windows, and look down the list of installed/uninstalled devices, there is a device called "PCIe Data Acquisition and Signal Processing Controller" which has no driver installed.
    I'm PC savvy, but i have never seen this before. My guess is that one of the motherboard drivers is missing, and Boot Camp installer doesn't include that driver?
    Has anyone seen/resolved this, and if so, how?
    Thanks.
    Kaj.

    Okay, will do.
    Thanks.
    Also i wonder if you could help with another problem?
    http://discussions.apple.com/thread.jspa?threadID=2758766&tstart=0

  • Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

    Link to picture
    hi everyone, 
    find original w8 cd and then i installed, when i was installing
    i deleted all recovery and other partition, i did not think what can i do,
    but then i activated windows and installed all driver, but i taking 
    after all drivers it stayed
    2''unknown devices''
    and when i rebooted, it says, usb device not recognized'' and also
    ''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
    i read related for w7 same problem, but what i will do now ?
      thanks.
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

    hi adilsefaersan,
    Welcome to Lenovo Community Forums!
    By opening your Device Manager right click on one unknown device and choose properties,
        >On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
         > then copy the value and post back here whats on the Value pane
    Do it for all those unknown Device and Post here the Value of the hardware ids
    also can you share your Windows Version and bit type so we'll knwo the correct download page for you
    Thanks and Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I have iCloud successfully set up my Mac and iPhone   iPad. Mac will not transfer to my other devices. Other devices transfer successfully. I have checked my iCloud setting on my Mac, but cannot see a problem. Can you help me?

    I have iCloud successfully set up my Mac and iPhone   iPad. Mac will not transfer to my other devices. Other devices transfer successfully. I have checked my iCloud setting on my Mac, but cannot see a problem. Can you help me?

    If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
    If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
    Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

  • Data logger and online processing application

    Dear All
    My application should include both data logging and online processing threads which are synchronized. I already implemented that by means of something we call "Ring buffer" which is an array containing the data and when the data stream reach its end it start over again from first index. It works almost well but sometimes it seems that my "timed loop" which is my processing thread is a little bit ahead of my data logger thread and it makes some distortion on data stream in processing thread but of course not in data logger.
    Since this type of application is very classic, we should have a kind of general prototype (example) for its implementation which provides fully synchronization between processing and logger threads so I was wondering if somebody knows where I should look into?
    Best regards
    Afshin

    Hello Afshin,
    Have a look at Software Circular Buffer in LabVIEW and Software Circular Buffer Reference Library for Multi-Channel Data Acquisition.
    The latter comes with an example.
    Regards,
    Eirikur Runarsson
    Platinum Applications Engineer
    NI Denmark

  • Device manager shows device but installation CD can't find a Creative prod

    Well, I suppose that the title of this thread says it all. My device manager recognizes the Creative product I have in one of the PCI slots, but when I insert the CD to install all of the programs I get an error message that reads "can't find a creative labs product on the system". Why would the computer be able to detect the device but not the CD? I've tried uninstalling and reinstalling the device but that doesn't help.
    The kicker is, my sound card worked just fine two weeks ago and I've not changed anything in the system.
    I did a search on this topic and other people have run into the same problem but there weren't any solutions posted. I'd really appreciate ANY help as this is a VERY frustrating problem.

    this is the glitch I think I had when I installed my XFI Platinum. I followed the instructions by loading all the hardware BEFORE loading any software. So now the card and the bay are installed and I boot up. The instructions tell you to cancel installing hardware at this point. The instructions say to put the CD in and install the software. Like I usually do I do a Custom install. Incidentely it only leaves out a few software options like the Volume Panel and some other stuff I didnt feel I would want. So when I put the disk in the first of 4 items as I remember it was the XFI software which is the mode changer and panel software and more. This is where I got the message you got so I skipped to the next item to install.
    I loaded the next item which was I think the media player and then I didnt load the next 2 because I didnt want them. AOl on my desktop and something else.
    So I figured it may have loaded drivers at this point but not the software because the card officially was in the system yet. So I rebooted.
    When it rebooted It detected the Card and a couple of other devices I think at this point.
    So obviously I figured that now the software would load since the card was officially recognized. I put the CD in and selected the first option and it then loaded the XFI software.
    Yea this is the one thing I found in the installation as a little confusing and not documented.
    Maybe this will help you.Message Edited by Crashman on 05-25-2006 2:3 AM

  • I can't access "Device Manager" "MMC" "CMD run as administrator" and some .exe files

    <p><img alt="" src="https://social.technet.microsoft.com/Forums/getfile/560661" /></p>
    <p><img alt="" src="https://social.technet.microsoft.com/Forums/getfile/560666" /></p>
    I need help! I am in hurry.

    Hi,
    Sorry for my delay.
    Based on your description, I’m a little confused with your issue. Would you please let me know more details
    of this issue? Thanks for your understanding.
    Would you please let me know OS edition information of this problematic server? Did you logon the server via
    an administrator account? Meanwhile, would you please let me know the complete error message when access Device Manager, MMC or other .exe files?
    For CMD, please open Task Manager, click File and select
    Run new task. Then type CMD and select Create this task with administrative privileges option in
    Create new task wizard. Will you still encounter issue?
    By the way, I type above links which you provided in IE. However, I can only find
    Page Not Found error. You can upload screenshots to
    OneDrive and then post link here. (Please hide all protected or private information)
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Pavilion dv7-2273cl - "Unknown Device" on Other Devices

    Its been 1 month since i bought my Entertainment Notebook and I can't figure it out, why does it have a Unknown Device listed on the Device Manager under Other Devices. Can someone tell me how to discover it?

    Hi,
    Go to: Control Panel -> Devices Manager
    Click with right button of Your mouse on each yellow sign with exclamation mark ( ) and choose properties. Then go to ' Details ' tab and paste here Hardware Ids . This way we will know what it is.
    Below You've got example how to do it:
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Maybe you are looking for

  • How to send smartform output through mail in PDF Format

    Can some one provide me the sample code Edited by: Revankar Satej on Feb 22, 2008 1:22 PM

  • Report in Slow mvg Material

    Dear All   My client wanted slowing moving material report, i run the mc46. In mc46 trasction it only give the cosumpation days report, my client wanted number days in slw mvg materal. plz needful help Thanks sonu

  • Reminder function modules

    Hi,        I want to implement a reminder application in abap.. if timer is set for some date and time i should get a pop up informing the same something like a reminder..          I don know is it possible in abap.. if yes can any one help me in imp

  • BI Content extractor for EORD

    Hi: Please let me know if we have a BI Content extractor for EORD ( Purchasing Source List ) . Thanks.

  • How do I remove itunes match

    I tried to remove Itunes match from my macbook and iphone through my account settings on the iphone store but it still says Itunes match is on when I view music settings on the ipod.  How do totally remove this from both devices?