Re-directing from one 3005 to another

Over the past week we have been migrating remote offices to a new 3005. Because of routing, we had to assign new IP addresses to our 3002s.
We've had a couple of job sites that were migrated that connected, but they were unable to reach 95% of internal resources. They were able to get to the network, authenticate (partially), and go out through our Web proxy.
I've done tracerts and clients at the remote offices can reach, ping, resolve names just fine, but for whatever reason applications won't open, email clients won't connect, etc.
One location had a linksys router infront of the 3002. We removed that, and that location failed to have any further problems. However, another location where the 3002 is plugged in directly to a dsl modem, the problem continues. We had to re-direct its connection back to the old location. We have 10 that work on the new location, and this one that is still a problem.
Any thoughts about what could be going on?
We change the configuration by downloading the config.txt file, modifying it and importing it back into the 3002.

Yes. In fact when importing the file, the system will also reboot itself automatically once the file has completed.
In troubleshooting, we power cycled the device several times, checked connections, double checked the visible configuration settings, etc.

Similar Messages

How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames)

How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames). I mean, is it possible to take the playhead from one frame to another frame directly which is 100 frames away in the time line? Thanks for any reply.

In the Timeline, go to the first frame and press M to put a marker on it. Go to the other frame you want to jump to and put a marker on that one too.
Now press Ctrl+Semicolon to go to the previous marker - or Ctrl+Comma to go to the next marker.
Andy

I recently upgraded my iphone to the latest IOS but my GPS seems to have a problem... I am unable to get directions from one point to another ... how do I solve this problem?

help! I recently upgraded my iphone to the latest IOS but my GPS seems to have a problem... I am unable to get directions from one point to another ... how do I solve this problem?

If using the built-in Maps app, directions are not available everywhere. Read here:
http://www.apple.com/ios/feature-availability/#maps-directions
If that's your problem, download the Google Maps app.

Transferring iCal files directly from one computer to another

HI,
I like to transfer files directly from my work computer to my home computer over the internet or using a flash drive. According to the support page, there should be .ics files in the Library>Calendars folder that can be transferred. I modified iCal yesterday, but there are no files in the Library> Calendars folders! Any suggestions on where they may be. It seems strange that you HAVE to have a mobileme account to transfer your calendar this way.
Thanks for any help,
ellen and her cats

Wow, what a quick response! Thanks, Limnos. I guess it was bleeding' obvious, and I should have thought of it before. Such a simple solution!
On a related matter, I also have just realised that the iTunes iOS backups are saved on the internal computer drive in a folder called MOBILESYNC rather than on an external drive, thus chewing up a lot of capacity on my SSD. Others reading this response may be interested to know that it is easy to have iTunes save the iOS backups to any external drive using a symbolic link in this directory. Go to
http://support.digidna.net/hc/en-us/articles/203504123-Storing-your-iPhone-Backu ps-on-an-Alternate-Location
for the details.
However, note that iBooks will NOT let you use this work-around, pathetic app that it is.

How can I copy songs from one iPod to another?

I received a new iPod Classic (last generation) and I'm trying to transfer my songs from my old iPod Nano (also last generation).
My iTunes library is also split up between my two parent's houses and I only have half the songs on my Nano in this computer's library.
Is there a way to copy only the songs on the +iPod Nano+ (not the iTunes library) and drop them onto the new iPod?

*Is there a way to copy only the songs on the iPod Nano (not the iTunes library) and drop them onto the new iPod?*
You can't copy directly from one iPod to another, you have to copy the songs back to iTunes and update the new iPod from there. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
SharePod Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod

How do i copy music from one ipod to another with 1 cord?

how do i copy music from one ipod to another with 1 cord?

You cannot copy content directly from one iPod to another. If the music was purchased from the iTunes Store, you have the following options:
- sync the iPod to your computer, transfer the content to iTunes, and then connect the other iPod and sync from iTunes
- use iCloud (which requires iOS 5).
- download the music from from the iTunes Store to the second iPod. See:
http://support.apple.com/kb/ht2519
Regards.
Message was edited by: varjak paw

Transfer music from one Ipod to another

I have an I Pod Mini and now also a shuffle. I would like to transfer the songs from the mini to the shuffle on ITunes but it doesn't work. Does anyone know how I can do that ? Thanks

You can't transfer directly from one iPod to another. If you have songs on the Mini that aren't in iTunes you need to copy them back and update the shuffle from there. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
SharePod Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

How can I export Faces info from one library to another?

How can I export direct from one Library to another? Currently I am exporting to desktop and then importing to alternative Library. This works including file name and description. However Faces info is lost. How can I retain Faces info?

It is not possible to "export" face information - there is no defined place to put it
You can use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to move photos between libraries including the full metadata
LN

HT1329 how do you transfer music from one ipod to another ipod

How do I move music from one ipod to another ipod?

The music that is on the one iPod must be stored in an iTunes library first before it can be synced/added to the other one. You cannot transfer content directly from one iDevice to another.
B-rock

Is there a way to move photos directly from one iPhoto library to another iPhoto library?

Is there a way to move photos directly from one iPhoto library to another iPhoto library?

Not using iPhoto - Aperture can or iPhoto Library Manager can
LN

How can I Move data from one column to another in my access table?

I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?

I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message..

Ipod will not update from library after transfer from one PC to another?!?

I recently transfered my itunes library from one PC to another using the ipod hard drive and according to the directions listed on this site. All went smooth and roughly 12GB of music transferred. After all music was successfully transfered to the library on the new PC I reconnected my ipod via USB hub and the dialog box popped up asking if I now want to associate my ipod with this new computer. I replied Yes.
As expected the program then deleted all 3000 songs off of my ipod and was supposed to then upload all the songs from my library (all songs were checked) back onto my ipod. For some reason all that happens is it says "update complete" and no songs transfer. I now have 3000+ songs in my library and ZERO on my ipod! I've checked all the default settings to be sure it is set to automatically update, all songs are checked and the box is checked to update checked songs, etc. I've shut down and restarted my PC and even tried several different USB hubs. Also, if relevant, when I connect my ipod the computer itunes recognizes it and it shows up on the itunes screen, but just for a few seconds. After it says it has successfully updated my ipod (I wish...) the little tab which shows "Chris' ipod" then disappears and itunes acts like it doesn't even know a device is connected.
I'm lost - I'd really appreciate any feedback anyone can provide. Thank you in advance!
Chris
20GB click wheel Windows XP

I recently transfered my itunes library from one PC
to another using the ipod hard drive and according to
the directions listed on this site. All went smooth
and roughly 12GB of music transferred. After all
music was successfully transfered to the library on
the new PC I reconnected my ipod via USB hub and the
dialog box popped up asking if I now want to
associate my ipod with this new computer. I replied
Yes.
As expected the program then deleted all 3000 songs
off of my ipod and was supposed to then upload all
the songs from my library (all songs were checked)
back onto my ipod. For some reason all that happens
is it says "update complete" and no songs transfer. I
now have 3000+ songs in my library and ZERO on my
ipod! I've checked all the default settings to be
sure it is set to automatically update, all songs are
checked and the box is checked to update checked
songs, etc. I've shut down and restarted my PC and
even tried several different USB hubs. Also, if
relevant, when I connect my ipod the computer itunes
recognizes it and it shows up on the itunes screen,
but just for a few seconds. After it says it has
successfully updated my ipod (I wish...) the little
tab which shows "Chris' ipod" then disappears and
itunes acts like it doesn't even know a device is
connected.
I'm lost - I'd really appreciate any feedback anyone
can provide. Thank you in advance!
Chris
20GB click wheel
Windows XP
In iTunes Preferences, did you update the iTunes Library to the new location? In other words, are you pointing to the correct location on the new harddrive for your iTunes Library?
Lisa

Transfer of sales orders from one plant to another

Dear all,
My requirement is as follows:
I have created some 500 sales orders (open) in one sales org+plant.
Now due to plant shifting to other area, I want to transfer all the above open sales orders to another sales org+plant.
One option is to create them manually. But that is time consuming and prone to errors.
Second option is to upload thru LSMW. That too is very tedious.
Third option is to extend/assign new plant to the old sales area and change the plant in the orders. But I want in the new sales org + new plant.
Is there any other option by which I can transfer the above sales orders from one plant to another?
Regards
SAPshed

Hi SAPshed,
The problem is not the change of plant, which is standard functionality, but the change of sales organization.
An awful lot of information depends on the Sales Organization: Company code (!!), customers, materials, prices, profit center, etc.
SAP does not even admit creating a sales order in a Sales Organization A with reference to a sales order with a sales organization B.
IMHO your best option is to try to maintain the current Sales Orders with the current Sales Organization and change the Sales Order in VA02 (your third option).
If you are absolutely sure that all materials and customers are created for the new Sales Area in the same way and that prices (discounts) are the same, you might want to do a direct update to VBAK table to change the Sales Organization (nasty!), but be prepared for the consequences (no SAP support in case of problems, you are on your own).
Therefore if you insist on a different Sales Organization, then option 2) will be your best best.
Best Regards,
Franck
P.S. IMHO it is Best Practice to have a unique Sales Organization / Company Code.

Print Layourt Designer how to migrate a report from one SBO to another

I have written a report on my Test version of SBO and need to migrate it to the customers site but cant see a method of exporting/Importing a User Report
(I am probably missing something obvious though.....) but would appreciate a prod in the right direction. thanks

Hi George,
There is two ways, you can either copy it over......but sometimes all the alignment goes off.
Or you can use the query SAP have given in a note. I do not remember the note number. But here is an extract of the note. I use this query often and have kept this extract one side. It only copies the layouts that do not exist in the destination company. Here is the extract.
An SQL query can be used to copy documents from one database to another, however the following conditions must be met:
1. Only edited documents with a doccode (the template primery key), which does not exist in the destination database, will be copied.
2. It is necessary to backup source and destination databases before running the query!!!
3. Both databases must share the same localization and the same version!!!
4. Select "Start" -> "Programs" -> "Microsoft SQL Server" -> "Query Analyzer" and run the following query:
Replace SOURCE with the source database name.
Replace DEST with the destination database name.
insert into [DEST].[dbo].[RDOC]
select [SOURCE].[dbo].[RDOC].*
from
[SOURCE].[dbo].[RDOC],[DEST].[dbo].[cinf],[SOURCE].[dbo].[cinf]
where [DEST].[dbo].[cinf].[lawsset]=[SOURCE].[dbo].[cinf].[lawsset]and [DEST].[dbo].[cinf].[version]=[SOURCE].[dbo].[cinf].[version] and [SOURCE].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [DEST].[dbo].[RDOC])
insert into [DEST].[dbo].[RITM]
select [SOURCE].[dbo].[RITM].*
from [SOURCE].[dbo].[RITM],[DEST].[dbo].[cinf],[SOURCE].[dbo].[cinf] where [SOURCE].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [DEST].[dbo].[RITM])AND [SOURCE].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [DEST].[dbo].[RDOC])
The query is also attached to this note!
Hope this helps.

How can I transfer apps purchased from one AppleId to another due to breach of account?

Due to a recent security breach not if my doing a user stole my apple id and needed to change appleid account. Now as a result i've lost all purchased apps from the itune store. I would like to transfer apps from one apple id to another without incurring additional costs. With sufficient information in direct contact with the store I should be able to transferable within the software or at very least with the itune store direct. Perhaps this is a way of charging additional costs for same programs?
Not a happy camper because of the theft in id but now to add insult to injury i'll have to repurchase the apps to properly sync with my devices.
Any help would be appreciated

You can't transfer iTunes content from one account to another. If someone had obtained access to your account credentials and you've had the account locked that should not affect the current authorizations on your computer, though it will prevent you from updating apps until you have resolved the issue. Rather than creating a new AppleID what you should do is regain control of your original Apple ID and have it reenabled with a new password, get, if possible, Apple to deauthorize all computers for your account (assuming you don't have 5 so can't do it yourself) then authorize your computers.
tt2

Re-directing from one 3005 to another

Similar Messages

Maybe you are looking for