Re-do a failed question but still record each attempt

Background to brief
We are creating a dynamic online quiz with multiple branching scenarios. One of the requirements of the quiz is that a user MUST answer the question correctly before procedding BUT we also need to record each failed attempt. If the user answers the question wrong 3 times then we need the ability to record this result.
I have disabled the correct / incorrect captions in favour of immediate branching to either the next slide upon success or a 'Sorry you answered that question' wrong slide that then jumps to repeats the same question.
SO - Failed attempt - takes the user to a failed question slide - slide then takes the user back to the same question to re-answer. The problem is that if you set the attempts to 'infinite' it does not record a failed result on each attempt and if you set the question to 1 attempt it does not allow you to answer the same question again when returning back to the question.
Is what we're trying to achieve possible with Captiviate 5.5? PLEASE HELP!

You could probably use advanced actions. Lieve has a wonderful blog post where she walks you through using advanced actions for quizzing. http://lilybiri.posterous.com/creating-customized-question-slides-using-adv Lieve is the Queen of Advanced Actions!

Similar Messages

Can't seem to download any app despite entering the correct password and answering 3 security question but still in the end it comes up the message that my session has timed out no matter what! Please help, many thanks in adv!!

Can't seem to download any app despite entering the correct password and answering 3 security question but still in the end it comes up the message that my session has timed out no matter what! Please help, many thanks in adv!!

Try doing it on your computer with iTunes and then sync to your iPad to see if it clears the problem.

TS1815 Subject: What Mountain Bike help I can't download my magazine, what mountain bike skills issue. I've followed the advise on the help questions but still can't view the magazine. Delete, re install etc.

Subject: What Mountain Bike help
I can't download my magazine, what mountain bike skills issue. I've followed the advise on the help questions but still can't view the magazine. Delete, re install etc.
Thanks Malcolm

said article below....
HT1747: iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier
Learn about iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier

Easy questions, but still need help!

The first question is how do I change a ring tone? I have been able to change the ring tone before, but sometimes the ring tone doesn't even play. Instead of a ring tone playing, I get the phone vibrating. Is there something I must disable for the ring tone to play? Also, is there a way to change text messages alert as well? I also get vibrate on that one.
The 2nd question is about the camera. When I take a photo on the camera, the image comes out distorted. Not the real image, but the preview of it. It seems stretched out. I think that's actually how it's suppose to be, but is there a way to change that?
3rd question: is there a way I can add an e-mail to the address book? To text images to my e-mail mostly. If so, would they charge me for that (am thinking if texting to your e-mail is considered using internet or something like that).

1st question, go to "profiles" it should look like a speaker. Select which one you want. If you choose loud it will vibrate for a second and then ring.
2nd question, my camera sucks so I have never even really used it. As much as I love my phone, the camera is the worst. Sorry, can't help you there.
3rd question, click on the contact you want to add the additional email to, select menu, edit, then menu again, choose "add email address" and type it in.
I hope this helps.

I posted question but still haven't got problem solved, please help

I have a table which has two columes
time- timestamp
value- integer
I have problem writing query to get rolling up cumulative of value for time buckets
Wanted results like following:
like cumulative value for rolling 5 minutes time bucket for past 1 hour
If current time is 8:51:00
value cumulative value
8:51:00 3 256
8:46:00 4 253
8:01:00 3 14
7:56:00 6 11
7:51:00 5 5
user want the time bucket can set to 5min, 1 hours, 1 day
and the data can be refreshed every 1 min. Is there some way we can get live rolling time bucket like
if currenct time is 3/18/2006 11:07:23 am, the interval(Time bucket) send to 1 hour. Results like following
count(*) interval interval3
187 88 3/18/2006 10:07:00 AM
280 87 3/18/2006 09:07:00 AM
34 86 3/18/2006 08:07:00 AM
1 mins later. time is 3/18/2006 11:07:23 am. refresh data, the result like
count(*) interval interval3
188 88 3/18/2006 10:08:00 AM
282 87 3/18/2006 09:08:00 AM
36 86 3/18/2006 08:08:00 AM
Is it possible?
Thanks a lot
previous question link
Re: Help about rolling cumulative sum in time bucket

The referenced thread had a much better subject line.
Question can the number of required buckets that are brought back be limited to say 12? If you can limit the result set to a fixed number of buckets then you should be able to just use a group by on a case statement with a little date/time math in it. That is you would be able to calculate the time boundries from the present and then compare the row data timestamps to the boundries.
With a variable number of buckets you would need to find the difference in the desired units (5 min, 1 hour, days ? 24 hours) between the current_timestamp and the oldest timestamp in the data. You would then need to calculate the boundries and compare the data. Doing all this would be more resource intensive than the group by the case test.
HTH -- Mark D Powell --

AAA authorization fails, but still command is executed...

Hi everyone,
i've implemented authorization and it basically works. The user can only use a limited set of commands (show int status, conf t, interface ethernet, interface gigabitethernet, interface fastethernet, shut, no shut).
Now I try to configure a loopback or Vlan interface, which should not be allowed.
COMMANDS IMPLEMENTED:
aaa authorization config-commands
aaa authorization commands 0 vty group tacacs+ none
aaa authorization commands 1 vty group tacacs+ none
aaa authorization commands 15 vty group tacacs+ none
line vty 0 15
authorization commands 0 vty
authorization commands 1 vty
authorization commands 15 vty
COMMAND AND OUTPUT FROM TESTING:
SWITCH(config)#int vlan 2
Command authorization failed.
DEBUG AAA AUTHORIZATION:
SWITCH#
Dec 7 14:31:50: AAA: parse name=tty1 idb type=-1 tty=-1
Dec 7 14:31:50: AAA: name=tty1 flags=0x11 type=5 shelf=0 slot=0 adapter=0 port=1 channel=0
Dec 7 14:31:50: AAA/MEMORY: create_user (0x46603F4) user='USER1' ruser='SWITCH' ds0=0 port=
'tty1' rem_addr='10.10.255.249' authen_type=ASCII service=NONE priv=15 initial_task_id='0', vrf= (id=0)
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Port='tty1' list='SCAS' service=CMD
Dec 7 14:31:50: AAA/AUTHOR/CMD: tty1 (60725991) user='USER1'
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV service=shell
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd=interface
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=Vlan
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=2
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): send AV cmd-arg=<cr>
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): found list "SCAS"
Dec 7 14:31:50: tty1 AAA/AUTHOR/CMD (60725991): Method=tacacs+ (tacacs+)
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): user=USER1
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV service=shell
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd=interface
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=Vlan
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=2
Dec 7 14:31:50: AAA/AUTHOR/TAC+: (60725991): send AV cmd-arg=<cr>
Dec 7 14:31:50: AAA/AUTHOR (60725991): Post authorization status = FAIL
Dec 7 14:31:50: AAA/MEMORY: free_user (0x46603F4) user='USER1' ruser='SWITCH' port='tty1' r
em_addr='10.10.255.249' authen_type=ASCII service=NONE priv=15
As you can see the reply from the Tacacs is a "FAIL", but still the command is executed.
RESULT:
SWITCH#sh run int vlan 2
Building configuration...
Current configuration : 38 bytes
interface Vlan2
no ip address
end
QUESTION:
I don't understand what the problem is...Since I get a FAIL from the Tacacs Server I assume that the configuration on that side is fine.
But why would the switch ignore a FAIL and still execute the command? Same problem exists with the Loopback-Interface.
Is this me not understandig the basic concept of AAA or is this some other problem?
The Switch is a Cisco WS-C3750-24TS (running c3750-ipbasek9-mz.122-50.SE2.bin).
The Tacacs runs Cisco Secure ACS4.2.0.124
Thanks,
Tom

Hi Tom,
this is CSCtd49491 : TACACS+ command authorization for interface configuration fails .
The bug is currently in a Closed state, meaning that the "Bug report is valid, but a conscious decision has been made not to fix it at all or in all releases."
As far as I can tell, the impact is rather limited since the interface that gets created will have no effect unless the vlan exists, and even then the effect is minimal since it cannot be configured.
You may want to open a TAC case or work with your account team to get the bug re-opened if this is still a concern though.
hth
Herbert

HT201363 I've changed my security questions, but when I try to make a purchase it still asks for my OLD questions ?

ive changed my security questions but when I try to make a purchase it still asks me to enter my old questions.. Why is that ?

The new questions show on your account on http://appleid.apple.com ? If they do then try logging out and back into your account on your phone (assuming that is where you are trying to purchase from) and see if the new questions then show on it.

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record?

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record of the articles I intend to read?

I'm currently dealing with this issue myself, except that my rMBP has NO articles in the reading list. It's a brand new rMBP too, purchased just this week, with the 2.6 Ghz Processor & 16GB of RAM.
Let's see what we can find. I may just take it back to the Apple Store.

TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours.

Iolo System Mechanic app failed and has caused FF not to act right - not loading buttons and some web pages to be a list instead of what the UI should look like.... I have reinstalled but still have the problem and not sure what to do

Basically certain web pages are not loading proper since app Iolo System Mechanic failed. I have reinstalled FF but still not loading right. Buttons are not showing and some pages are in a list instead of the GUI view.

I installed and uninstalled Firefox several times - finaly after I selected NOT to have Firefox as the default browser, the installation worked and pages loads correctly now! I made Firefox the default browser after the successful installation!

Output routine fails but still output is issued....Urgent

I have an output routine attached to a output type which generates IDOC. There are different conditions placed in the routine under which SY-SUBRC is made either 4 or 0.
In one of the cases Sy-subrc is 4 but still output is issued and IDOC is generated...
My question is even though output routine is not fulfilled is there a chance of output getting issued on the document ???
Need you help urgently..........

Hi,
Yes the IDOC will be triggered with the different status.
Regards,
Sharath

My facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

You will probably find better support about the features of the Webex app on their support page here: http://www.webex.com/products/web-conferencing/mobile-iphone-ipad-faq.html
Doesn;t look like it's listed as a feature of the iPad app.

HT201303 The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.

The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

Error 3194:
This device isn't eligible for the requested build
It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

Re-do a failed question but still record each attempt

Similar Messages

Maybe you are looking for