Re: does not contain ATA device

The computer does not contain ATA device

I am having problems burning a music cd on my MacBook Pro 5.  While it says "this system does not contain any ATA devices", when I click on "Disc Burning", the following info comes up:
HL-DT-ST DVDRW  GS23N:
  Firmware Revision:          SB00
  Interconnect:          ATAPI
  Burn Support:          Yes (Apple Shipping Drive)
  Cache:          2048 KB
  Reads DVD:          Yes
  CD-Write:          -R, -RW
  DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
  Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
  Media:          Insert media and refresh to show available burn speeds
So... can I burn a cd or not?  When I follow the "Help" instructions, there is no "Burn" button.  This is the 1st time I have tried to burn a cd on this machine.
Thanks for any help.
Pat

Similar Messages

  • If in my Hardware section of System Information, when I select Thunderbolt and the reply is:    Thunderbolt: No hardware was found,  does that mean the computer does not contain Thunderbolt or that no Device using Thunderbolt is attached?

    If in my Hardware section of System Information, when I select Thunderbolt and the reply is:
      Thunderbolt: No hardware was found,
    does that mean the computer does not contain Thunderbolt or that no Device using Thunderbolt is attached and that the computer does have thunderbolt?
    I have Lion and both my Mini Server and Macbook Pro are less than a year old, however both were bought from Apple as reconditioned units so they might be older, and I expected they would have Thunderbolt but when I connect a Black Magic Intensity Extreme unit which is a thunderbolt powered and driven Device using a Thunderbolt Cable to either computer, it is not recognized.

    No other information in Sys Info and I guess as both units, Mini and MBPro, were reconditioned, they were pre July and February , 2011, respectively. 
    I don't suppose there is any way to add Thunderbolt or USB 3.0 to prior generation Mac Products or get similar performance.

  • Win8.1 - Error when using traceview "PDB file does not contain provider information"

    We have been attempting to manage a Windows 8.1 machine by using the Enterprise Device Management Protocol.
    We are encountering a failure during the process and would like to inspect what is going wrong on the Client Side. Used the “Windows 8.1 Enterprise device Management Protocol” guide that was published by Microsoft.
    The guide suggests that for capturing and viewing logs generated by the built-in management agent and its components you will need access to the traceview.exe utility and the debug symbol files (.pdb) for the Windows build running on the device.It says that
    we can enable advanced logging by adding the following keyvalue to the registry.
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\MDM\Debug Settings]
    "EnableSyncmlLogging"=dword:00000001
    Start the traceview.exe utility from an elevated command prompt and add the following providers:
    mdmagent.pdb
    mdmappprov.pdb
    mdmsettingsprov.pdb
    Start the log capture and execute the scenario.
    We have been having problems with adding the providers. We tried both downloading the symbol files from
    http://msdn.microsoft.com/en-in/windows/hardware/gg463028.aspx#Download_windows as well as pointing traceview to the Microsoft symbol server. All our attempts to add providers result in “PDB file does not contain provider information”
    Machine specs:  Windows 8.1 Pro – 64 bit operating System
    We would be grateful if someone could help us set up logging for this scenario using traceview or any other tool/mechanism.

    Hi,
    About traceview issue, better to post your question to the forum for Windows WDK forum:
    https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=wdk
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn
    from your interaction with us. Thank you for your understandin
    Karen Hu
    TechNet Community Support

  • "PDB file does not contain provider information" Win8.1 - Error when using traceview

    We have been attempting to manage a Windows 8.1 machine by using the Enterprise Device Management Protocol.
    We are encountering a failure during the process and would like to inspect what is going wrong on the Client Side. Used the “Windows 8.1 Enterprise device Management Protocol” guide that was published by Microsoft.
    The guide suggests that for capturing and viewing logs generated by the built-in management agent and its components you will need access to the traceview.exe utility and the debug symbol files (.pdb) for the Windows build running on the device.It says that
    we can enable advanced logging by adding the following keyvalue to the registry.
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\MDM\Debug Settings]
    "EnableSyncmlLogging"=dword:00000001
    Start the traceview.exe utility from an elevated command prompt and add the following providers:
    mdmagent.pdb
    mdmappprov.pdb
    mdmsettingsprov.pdb
    Start the log capture and execute the scenario.
    We have been having problems with adding the providers. We tried both downloading the symbol files fromhttp://msdn.microsoft.com/en-in/windows/hardware/gg463028.aspx#Download_windows
    as well as pointing traceview to the Microsoft symbol server. All our attempts to add providers result in “PDB file does not contain provider information”
    Machine specs:  Windows 8.1 Pro – 64 bit operating System
    We would be grateful if someone could help us set up logging for this scenario using traceview or any other tool/mechanism.

    I've tried to create the TMF file were the provider is in located. The .PDB file will try to locate the provider in the  TMF file, but it doesn't get created. I've used tracepdb.exe to make one.
    I don't think Microsoft provided the provider. Instead it is looking for a .tmc file.
    See the documentation for creating a tmf file.

  • Is there a way to add photos to the iPad without replacing the ones already loaded?  I am trying to add photos from a folder on a computer that does not contain the other iPad photos.

    Is there a way to ADD photos to my iPad without replacing the ones already there?  I am trying to add photos from a computer that does not contain photos already synced to the device.

    You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account

    Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account in order to access Icloud?

    If you want to change your iCloud ID or password on your phone go to Settings>iCloud and tap Delete Account, then sign back in with your updated information.  Note: this only deletes the account and any synced data from your phone, not from iCloud.  Provided you are signing back into the same account and not changing accounts it will be synced back to your device when you sign back in.

  • CD does not show under Devices on iTunes

    I am a new user and would appreciate any suggestions. My iPod shows under Devices on iTunes, and I've had no problem buying music from iTunes store or loading to iPod.
    I have set iTunes to be the default player of music cds but they do not play when loaded (iTunes opens) and the CD does not show under Devices.
    Thanks in advance for any help.
    HP dv6110ca   Windows XP  

    I did run the diagnosics before, and have just run again. As you will see it passes with flying colors - but still is not recognized as a device on itunes......
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Hewlett-Packard HP Pavilion dv6000 (RN907UA#ABL)
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Video Driver: NVIDIA GeForce Go 6150\GeForce Go 6150
    IDE\DiskST98823AS______________________________7.24___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomPHILIPSDVD-RAM_SDVD8821________________EH19___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    E: PHILIPS DVD-RAM SDVD8821, Rev EH19
    Audio CD in drive.
    Found 14 songs on CD, playing time 72:11 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:13:25
    Track 3, start time 09:58:02
    Track 4, start time 14:37:60
    Track 5, start time 20:31:35
    Track 6, start time 25:38:35
    Track 7, start time 31:37:27
    Track 8, start time 35:21:52
    Track 9, start time 41:56:50
    Track 10, start time 47:36:50
    Track 11, start time 52:54:27
    Track 12, start time 58:11:12
    Track 13, start time 63:52:55
    Track 14, start time 68:20:05
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 10 16 20 24.
    The drive CDRW speeds are: 10.
    The drive DVDR speeds are: 10.
    The drive DVDRW speeds are: 10.

  • Stack file that is generated does not contain any java components

    We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
    Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
    ++++
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: EA4
    Hostname...........: wipro
    Install directory..: e:/usr/sap/EA4
    Upgrade directory..: F:\EHPI\java
    Database...........: Oracle
    Operating System...: NT
    JDK version........: 1.6.0_07 SAP AG
    SAPJup version.....: 3.4.29
    Source release.....: 700
    Target release.....: 700
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....:
    ABAP stack present.: true
    The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
    com.sap.sdt.ucp.phases.PhaseException
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    PREPARE_JSPM_QUEUE
    INIT
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    ++++++
    PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
    Jun 28, 2010 9:21:23 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
    Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack  queue preparator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
    Jun 28, 2010 9:21:24 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
    Jun 28, 2010 9:21:24 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    ++++++++++++++++++++++
    [stack xml data: version=1.0]
    [SPAM_CVERS]
    ST-PI                         2005_1_7000006
    LSOFE                         600       0015
    SAP_AP                        700       0015
    SAP_BASIS                     701       0003
    SAP_ABA                       701       0003
    SAP_BW                        701       0003
    PI_BASIS                      701       0003
    PLMWUI                        700       0002
    SAP_APPL                      604       0002
    EA-APPL                       604       0002
    SAP_BS_FND                    701       0002
    EA-IPPE                       404       0002
    WEBCUIF                       700       0002
    INSURANCE                     604       0002
    FI-CA                         604       0002
    ERECRUIT                      604       0002
    ECC-DIMP                      604       0002
    EA-DFPS                       604       0002
    IS-UT                         604       0002
    IS-H                          604       0003
    EA-RETAIL                     604       0002
    EA-FINSERV                    604       0002
    IS-OIL                        604       0002
    IS-PRA                        604       0002
    IS-M                          604       0002
    SEM-BW                        604       0002
    FINBASIS                      604       0002
    FI-CAX                        604       0002
    EA-GLTRADE                    604       0002
    IS-CWM                        604       0002
    EA-PS                         604       0002
    IS-PS-CA                      604       0002
    EA-HR                         604       0005
    SAP_HR                        604       0005
    ECC-SE                        604       0002
    [PRDVERS]                                  
    01200314690900000432SAP ERP ENHANCE PACKAGE       EHP2 FOR SAP ERP 6.0          sap.com                       EHP2 FOR SAP ERP 6.0                                                    -00000000000000
    01200314690900000463SAP ERP ENHANCE PACKAGE       EHP4 FOR SAP ERP 6.0          sap.com                       EHP4 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900001296                                                            sap.com                                                                                +00000000000000
    01200615320900001469SAP ERP ENHANCE PACKAGE       EHP3 FOR SAP ERP 6.0          sap.com                       EHP3 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01                                           +00000000000000
    [SWFEATURE]                                                                               
    1                   01200615320900001296SAP ERP                       2005                          sap.com                       SAP ERP 6.0: SAP ECC Server
    19                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
    20                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Media
    21                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
    23                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
    24                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
    25                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
    26                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
    30                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
    31                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
    33                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
    37                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
    38                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
    42                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
    43                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
    44                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
    45                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
    46                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
    47                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
    48                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
    55                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
    56                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
    59                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
    69                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
    9                   01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
    ++++++++++++++++

    Though we have configured Java in solution manager the stack file that is generated does not contain any java components
    You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
    Nelis

  • BI Publisher Word Template The report does not contain any data fields.

    I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
    Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
    2. Oracle BI Publisher -> Open (I open the report)
    3. Go to Insert -> Table Wizard
    I get this error:
    The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
    Please help

    Hi
    How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
    Please clarify
    Thanks

  • My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

    My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

    You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
    http://support.apple.com/kb/TS1538

  • My iPhone 4s does not appear on devices when connected to iTunes in my Mac

    My iPhone 4s does not appear on devices when connected to iTunes in my Mac

    Check to make sure you have enough free space to include the videos.

  • I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

    I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

    Welcome to the Apple Community.
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

    I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Unable to load the EJB module. DeploymentContext does not contain any EJB.

    I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
    SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
    SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
    SEVERE: Exception while preparing the app
    SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
    If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
    org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
    If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
         at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
         at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
         at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
         at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
         at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
         at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
         at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
         at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
         at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
         at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
         at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
         at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
         at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
         at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
         at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
         at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
         at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
         at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
         at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
         at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
         at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
         at java.lang.Thread.run(Thread.java:722)

    My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
    Are you sure you have implementend some beans? Or did you do this only in the web module?
    Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

  • File Screening Audit Report does not contain any data : report statistics is empty

    Hi ,
     I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008. 
    I am getting details of file screen audit in Event log  , But incident report file screen audit report does not contain any value.
    Getting report for each incident of file screen audit  , But it does not contain any data in report statistics.
    Data available in scheduled report of file screen audit.. not available in incident report only..
    Please assist...
    Thanks,
    Vasanth.M
    Thanks, Vasanth.M.

    Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
    technet library :
    https://technet.microsoft.com/en-us/library/cc754540.aspx
    Carlo

Maybe you are looking for