Re: Does not print when cover is partially open, as in copying from a book.

I'm using an iPad Air version 7.1.2
The Mac is 10.10.2 Yosemite
I receive the whirling circle and it just continues forever until I turn the printer off.
Another issue is that I will print from either device, but nothing happens. Then ONE DAY LATER, the printer all of a sudden spits out the page I was trying to print. I may bring it back to factory settings and start over again. Thanks for your help.

@Meowsic 
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

  • My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

    My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband.  I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition,  but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr  12 PER = 05YR etc, that does not really help me :-). It won't print any testpages.  H E L P!!!

    Hello Elisabeeth,
    Welcome to the HP Forums!
    I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
    I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
    Please post your results, as I will be looking forward to hearing from you.
    I worked on behalf of HP.

  • FormCentral PDF export: Drop-Down Menu does not print when no choice is made

    FormCentral PDF export: Drop-Down Menu does not print when no choice is made
    I want to be able to print a blank form for the older clients who cannot use a computer. Form has a few drop-down menus and they only appear on the print out if an option is selected. The form was created on FormCentral. Can anybody help?
    Sorry if i'm a noob, not much experience in creating PDF forms yet.
    Thanks for your help,
    Yon

    Hi Perry
    I am using the trial version of Adobe Acrobat and am using the provided FormCentral software to create the form. I find it very limited, but easier to learn. I am creating a financial needs analyser.
    The section of the drop down menu is a selection from 1-5 (rating of importance for financial goals). I want to print out the questions and the empty boxes for people to fill them in by hand (e.g write 1, 2, 3, 4, or 5). When I leave a blank choice, no box is printed out. I write the questions in formatted text and leave the text/caption for the drop-down as blank, as it is difficult to set the margins correctly so various elements align (I pretty much have to estimate).
    As said before, I may have been missing a massive part of the software, but I haven't used any training - just going by instinct so far.
    Do you know if I can do anything about it?
    Thanks,
    Yon

  • ITunes screen does not appear when I try to open

    ITunes screen does not appear when I try to open.   I can play music by using "controls" but screen does not open.

    What did your email provider say about it when you contacted them?

  • Sometimes (but not always), when I try to open a pdf document from the US bankruptcy court website, I get a window asking if I want to use Adobe Acrobat. After I click "yes", I get a bland screen.

    == Issue
    ==
    Firefox is having problems with certain web sites
    == Description
    ==
    Sometimes (but not always), when I try to open a pdf document from the US bankruptcy court website, I get a window asking if I want to use Adobe Acrobat. After I click "yes", I get a bland screen.
    == URL of affected sites
    ==
    http://
    == Troubleshooting information
    ==
    Firefox Version
    3.6.3
    Extensions
    Name
    Version
    Enabled
    ID
    Skype extension for Firefox 2.2.0.70 false
    Java Console 6.0.01 false
    Java Console 6.0.02 true
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows 7
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-Office Plugin for Netscape Navigator
    *Download and Print Plug-in DLL
    *Default Plug-in
    *Shockwave Flash 10.0 r45
    *Adobe PDF Plug-In For Firefox and Netscape

    Hi.
    Does this only open on that specific site?
    In any case, you may want to:
    - instruct Firefox to handle PDF files in a specific way by going into Tools > Options > Applications and selecting the option you want for the PDF files
    - reinstall Adobe Reader and its Firefox plugin
    - install another reader instead of Adobe Reader. I recommend Foxit Reader ( http://www.foxitsoftware.com/pdf/reader/ ), since it's free, VERY light, VERY fast, safe and also has a Firefox plugin (make sure you don't have both Adobe Reader plugin and Foxit Reader plugin enabled/installed at the same time in Firefox)

  • Hp deskjet 1510 does not print when choosing specific font style

    Hi Guys,
    I just bought hp deskjet 1510 and installed the driveres via the CR came with.
    - I use Windows 7
    - Have Microsoft Office 2010
    My issue is as the following:
    When typing a document and chose font type "Adobe Arabic" then click on print, the printer power light will only blink and no paper is printed! When changing the font to other type then the printer will print out the paper.
    Is it something can be fixed? it is not critical choosing this spcific font type for me but would be lovely if someone know how to fix this.
    Thanks,
    Raed

    Hi Raed_B,
    Thank you for answering my question, and trying the HP Print and Scan Doctor. Sorry it did not work for you, I do have some more suggestions to try:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Make sure the firewall is disabled. Turn Windows Firewall on or off.
    Make sure antivirus is disabled. Disable antivirus software.
    Re-install the software using the HP Printer Install Wizard for Windows.
    Hope this will help resolve your issue, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • ESC key does not work when Photoshop CS4 is opened

    Hi everyone!
    It seems that everytime my Photoshop CS4 is opened, my ESC key ceases to function. When I close the PS, it starts to function again. Running Windows 7 64-bit. I've tried cleaning my registry and reloading PS. Not that critical, but it got me to notice that I use my ESC key more often than I thought
    Any thought?
    Thanks!
    JP LeBlanc
    Montreal SEO
    [email protected]

    http://forums.adobe.com/thread/372523
    Mylenium

  • Video does not restart when closed and re-opened

    I have a .f4v file (Adobe Premiere) embedded into a swf. The
    video is launched into an iframe when the user clicks on the link
    to "See Video". When I close the iframe in Firefox and then click
    on the link again to launch the video, it starts from the
    beginning. In IE7, IE6 and Safari the video continues from where it
    left off. I would like for it to start from the beginning like in
    Firefox. Any suggestions?
    Thanks!

    Do you have a link to the video.  Why are you using the iframe?  I'm curious to see how this works.  I have a html page with a swf with buttons that play movies on a small area on the screen it's easily controllable though I only programmed the pause button.  I have the selection buttons run the small videos on roll over and a higher res larger version with swf skin with full controls - seek when you click the selection.
    http://jimslounge.com/publicDomain/

  • I get a message that helper application does not exist when I try to open a jpg or excel files as attachments. I have associated use windows live photo gallery

    I have gone to Tools, Options, Attachments and there are programs associated that should be able to open the files - Windows Live Photo gallery for JPG files and Microsoft Excel for excel files. I have to actually download and save the files and then open them. Is there a fix for this?

    Thanks, Matt, I did as you suggested and now it works!

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • When text is low on the page, it does not print on the page!

    Office Jet J6480, Windows 7 32 bit.
    Sometimes pages with a content line near the bottom of the page, does not print or the characters are only partially
    printed on the output page.

    Hello, you may be able to fix this problem on your HP Officejet J6480 All-in-One Printer by following the steps in the following document: "The Product Does Not Print the Bottom Page Border in Microsoft Office": 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01671543&tmp_task=solveCategory&cc=us&dlc=en&la...
    There are two more links inside that web page with some other solutions if you are experiencing this problem with other Operative System:
    -Printed Text is Cut Off on the Last Line of the Page in Windows XP
    -Printed Text is Cut Off on the Last Line of the Page in Windows Vista
    I am an HP employee, Printer/All-in-One Expert.
    Give Kudos to say "thanks" by clicking on the "thumps Up icon"
    Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.

  • Photosmart C6180 on wireless network does not respond when attempting to print

    Photosmart C6180 successfully installed on wireless network does not respond when attempting to print.  All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print.  Get no error message other than document failed to print.  HELP!

    So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

  • When printing on photopaper with HP PSC 1510, the top part of the print does not print.

    When I try to print on photopaper with PSC 1510, it does not print the top part of the print - the paper seems to get feeded well. It looks like it somehow moves the printing area 10 cm higher on the document, so the pictures are cut in the middle and the top part is not printed. This varies - printing using the Windows image preview didn't cut off as much as Open Office's Writer.

    As long as your cartriges are full, put a photo on you desktop, highlight it , click COMMAND P and the print preferences window should drop down, and select your printer and photo paper.

  • Printing is unclear and black lettering does not print at all when I use my PC

    I have an all in one 4500 wirless G521n Printer. It prints perfect from my tablet E Print but when I print from my computer the black ink does not print and the color text print does not print fully. All the settings are correct according to the HP scan. Any help would be greatly appreciated.

    MON IMPRIMANTE HP DESKJET 1510  IMPRIME UNE PAGE BLANCHE. j'AI UTILISÉ LE TRUC  "DESKJET 6980 SERIES ET ÇA NE FONCTIONNE PAS PLUS.mES CARTOUCHES SONT D'ORIGINE ET MON IMPRIMANTE DIT LE CONTRAIRE ET DOUTE DE L'AUTHENCITÉ. QUOI FAIRE À PART LA JETER ET EN ACHETER D'UNE AUTRE MARQUE ?????JE N'UTILISE PAS BEAUCOUP ET JE NE VOIS PAS QU'ON ME DISE QUE L'ENCRE EST ÉPUISÉE.SUNNYBOYCAN

  • I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

Maybe you are looking for