Re: Does partitionning cause problems with the Toshiba Recovery System ?

I'm french so don't be afraid of mistakes !
I wonder if I can repartition my HDD as I want
First of all, I explain you what I've understood with the FAQ:
If Vista fail to boot, Toshiba Recovery in the hidden partition WinRE ( eisa configuration) offer to repair and use either the DVD we have burn or the directory HDDRecovery in the partition E: to repair.
My question is if I don't have the DVD (or if I lost it) :
Can I repartition my HDD (not the Recovery partition but enlarge the partition C: en reduce the partition E:) without causing problems of recovery ?
In other terms will the Recovery partition at boot update the position of recovery files in E:
And if it works, can I simply copy-paste the HDDRecovery directory from E: to C: and then to E: while I format E:
Thank you for your answers
Juju313

Hello
I think you mixed up something...
The hidden Windows partition (Recovery Environment) has nothing to do with the Toshiba recovery disk or HDD recovery procedure. This is a Windows feature that is on all PCs and notebooks available so my suggestion is you read this good Wikipedia article about this:
http://en.wikipedia.org/wiki/Recovery_Environment
The HDD recovery files are stored on the second partition of the HDD in the folder HDDRecovery. So if you use the HDD recovery function only the first partition will be formatted and you can only use this feature if you have access to the advanced boot menu. If you dont have it you must use the Toshiba recovery disk because the disk formats the whole HDD and restore the factory settings of the notebook (the HDD recovery too but only with the first partition).
You can change the partition size of both partitions but there should be enough free space on both partitions. Otherwise the HDD recovery does maybe not work.
About the Vista partition tool I can prefer this useful article:
http://aps2.toshiba-tro.de/kb0/TSB7101OB0006R01.htm
I hope you understand it better now and if you have more questions please let us know.
Greets

Similar Messages

Problems with the Toshiba Recovery Disk Generator program

Hi,
I have a Satellite Pro U400 laptop running XP SP3 - iyes t's old, but still running with newly added memory and a new battery.
I wanted to make a fresh set of recovery disks so I fired up the Toshiba app. It created the first disk fine. Then it prompted for Disk 2. So I put Disk 2 in. It contemplated for a bit, it said it would now create disk 2. Then, it prompts me again for Disk 2. There's no error message or anything. So, I ejected the disk and tried a different one. Several times. It just can't get past this to create disks 2 and 3.
I downloaded an "update" I found on the Toshiba site, but it didn't change anything.
Any suggestions?
Thanks.

Hello
I think you mixed up something...
The hidden Windows partition (Recovery Environment) has nothing to do with the Toshiba recovery disk or HDD recovery procedure. This is a Windows feature that is on all PCs and notebooks available so my suggestion is you read this good Wikipedia article about this:
http://en.wikipedia.org/wiki/Recovery_Environment
The HDD recovery files are stored on the second partition of the HDD in the folder HDDRecovery. So if you use the HDD recovery function only the first partition will be formatted and you can only use this feature if you have access to the advanced boot menu. If you dont have it you must use the Toshiba recovery disk because the disk formats the whole HDD and restore the factory settings of the notebook (the HDD recovery too but only with the first partition).
You can change the partition size of both partitions but there should be enough free space on both partitions. Otherwise the HDD recovery does maybe not work.
About the Vista partition tool I can prefer this useful article:
http://aps2.toshiba-tro.de/kb0/TSB7101OB0006R01.htm
I hope you understand it better now and if you have more questions please let us know.
Greets

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

Does anyone have problems with the ipad 4 staying connected to century link Internet?

Does anyone have problems with the ipad 4's wi if Internet staying connected to century links Internet??? Please help!!

LOTS of people reporting a range of similar issues.
https://discussions.apple.com/thread/6648856
https://discussions.apple.com/thread/6574287

Does anyone have problems with the led light ?

Does anyone have problems with the led light ?

LOTS of people reporting a range of similar issues.
https://discussions.apple.com/thread/6648856
https://discussions.apple.com/thread/6574287

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

Check System Preferences > Sound > Output
Make sure the correct device is selected.

Does anyone have problems with the lightening to USB cable when charging from an outlet? After 6 months of use, it seems to wear out as a result of twisting caused by using the iPad while charging?

Does anyone else have problems with the lightening to USB cables, particularly the longer version, when using the iPad and charging at the same time?
If so, am I doing anything wrong?

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Question / problems with the Toshiba TV 40TL938 (40TL938F)

Hi everybody,
I bought the Toshiba TV 40TL938 french version ( 40TL938F ), in an online store.
I have a few question / problem, and i hope you could help me.
- when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
- when i play MKV vido files via DLNA (with XBMC), there is no subtitles anymore. Whose fault is it ? my TV ? XBMC ? do you how i can fix this ?
- does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938
Thank you very much by advance for your help !
Backslash
French user of a beautiful Full HD 3D 40 inches toshiba LED TV :)

> {quote:title=TomDexter wrote:}{quote}
> > when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
>
> User manual page 76:
> http://www.toshiba-om.net/LCD/PDF/English/TL938-4046-English.pdf
> You will need to check the option: +Subtitle Type+
Hi !
Thank you for your answer,
I saw this but there is no way to change the subtitle setting.
In "subtitle type" the only thing i can do is to swich from "normal" to "deaf and hearing impaired" ("sourd et malentendant" in french).
So i guess i will have to get used to it
Anyway, thank you for your help !
> {quote:title=donhe7 wrote:}{quote}
> BACKSLASH ASKS " does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938?"
>
> Please excuse my ignorance, but what is "DTS"???
>
> donhe7
DTS is an audio format, such as AC3 or mp4. This TV doesn't support DTS, so when i play movie (such as MKV file) with audio in DTS, there is no sound (but the video is ok).

Clarification: Decommissioning Exchange Mailbox server after move to Office 365 will not cause problems with the remaining Exchange CAS server

Environment: 1x Exchange 2013 Mailbox server
1x Exchange 2013 CAS server
All users migrated to office365. MX record pointed to Office365
DIRSync implemented
Clarification: All users are now using Office365. As per recommendation from Microsoft there should be 1 exchange server to be retained and the rest can be decommissioned. I tried to test the scenario by shutting down the exchange server
with the mailbox role and leaving the exchange server with CAS role online. I tried to run Exchange Management shell on the CAS but I'm getting errors. To clarify, once I have uninstalled the Exchange server mailbox will the CAS still look for the mailbox
server? Or do I need to decommission both Exchange servers and then install a new Exchange server with CAS role?

Hi
If you are looking for a hybrid coexistence with office 365 then at least one Exchange 2013 Client Access and one
Exchange 2013 Mailbox server must be installed in the on-premises organization to run the Hybrid Configuration wizard and support Exchange 2013-based hybrid deployment functionality.
http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
Summary - You need to have at-least one CAS and MBX combined together in onpremise or it can even be seperate CAS and seperate MBX but microsoft recommends to have both CAS and MBX together in onpremise
Source -
http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Does anyone have problems with the 7th generation nano not being recognized by windows?

Just got my nano and although it worked the first time I plugged it in to my laptop, it now can not be recognized by Windows, it is completely dead and will not charge at all...anyone else having this issue?

Hello Chloe
Start with the first article below to go over some general hardware troubleshooting to get a charge on your iPod nano. If you get that to turn on and you cannot get it to show up on your computer, then the second article should sort you out.
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Regards,
-Norm G.

Problems with the Stanford Reseach Systems DS345 Function Generator

I'm writing a labview program that will allow operation of the Stanford Reseach Systems DS345 Function Generator. The problem that I'm having is in the amplitude calculation. The way the driver finds the amplitude is by recieving an array of what are essentially y-coordiantes (on a cartesian graph system), finding the max and min of the array, and subtracting them.
This is where the problem lies. I've designed my program so I can type in an equation, see the graph of this equation, and send the y values into a the subvi provided by the driver. This subvi is the one that finds the amplitude...etc and sends it to the oscilliscope. However, when I use a formula for something as simple as sin(x), it caclulates the amplitude as 2. This is because the max/min values of sin(x) are 1 and -1. So the function generator reads in an amplitude of 2. This amplitude of 2 results in a sine wave that oscillates between 2 and -2. Obviously, this is not what I'm looking for. I know by dividing the sine wave coordiantes by 2, or just using the max/min value to be sent to the function generator as the amplitude will work in this case, but not for all cases (ex: sin(x)*e^(-3x). I'd appreciate any suggestions on how to fix this amplitude problem for all cases.
In addition to having this sine function, I wrote a subvi that essentially generates a series of pulses depending on the user preferences. It's relativly complicated to explain how it works, but it just sends an array of y-coordinates (similar to above, and they are sent to the same subvi to be sent to the function generator). This array is the one that truly puzzles me.
For example, I have a single pulse, with height 5. The y array is 10 places big. At index 0 to 3, the y value is 0. At 4 to 6, the value is 5. And from index 7 to 9, the index is zero again (Imagine a pulse "_|-|_" , it may help understand this).
I send this array of 10 places to the same subvi as the one described in the sine function earlier. I would expect the amplitude to go in as five (max - min), and it does. However, when determining the actual value from the oscilliscope, it turns out to be 10.8 peak to peak voltage. The values range from -.8 volts to 10 volts. I can't imagine why they do not range from 0 to five as specified in the array which is sent.
If anyone has any answers, suggestions or questions concering this description, I would greatly appreciate it. Feel free to post answers or email me at: [email protected]
I'll be more than happy to post the files if someone wants to look at them.
Thanks again,
Jim Dalton
North American Lighting
[email protected]

I am taking these measurments using the measurment and automation explorer test function. I set my range on all channels to 0-8khz and Have been inputing no more than 8khz. What leads me to believe I have a software or config problem is that I sent in a module to NI for repair and this is the brand new one they sent me back. While testing this module, I also have a 1102 module and 1124 module on the scxi-1000 chasis and both of those are working as specified. I also moved the 1126 module to slot 1 and ran it that way as well when I replaced the chasis.

Major problem with the BLOG COMMENT SYSTEM - Please advice.

Hi there!
I am having some trouble with the way the added Blog comments system appears on my iWeb created site's blog section. The "Add a comment" etc, always get pushed down into the black browser background everytime a new comment gets added rather then the page background actually expanding WITH the added comments and being a part of the page background. Below you'll find a pic of the phenomenon...
Please help, is it supposed to be like this and i'm doing something wrong or is it a bug in the software?
I have to add more footer height to the page for every comment that someone will leave me on the blog, otherwise the comments will end up outside the page.
The page is not yet live and ready but it's like this with all major browsers and platforms when checking...FF, Safari, IE - Mac and PC...
So, the pics...the first pic is of how it looks inside the iWeb software and is how it should look obviously..the second...well, is how it looks when actually published. It's driving me crazy! I don't want to set the footer height to 1000 to prepare the pages for future comments as it looks real bad. The page should expand with the added comments.
[IMG]http://i136.photobucket.com/albums/q181/GentleMidget/Temp%20folder/BLOGCOMMENTPR OBLEM1.jpg[/IMG]
[IMG]http://i136.photobucket.com/albums/q181/GentleMidget/Temp%20folder/BLOGCOMMENTPR OBLEM2.jpg[/IMG]
/Rich
Right now? Intel mini Mac OS X (10.4.8) A few laptops, a few stationary ones...i like macs
Right now? Intel mini Mac OS X (10.4.8) A few laptops, a few stationary ones...i like macs
Right now? Intel mini Mac OS X (10.4.8) A few laptops, a few stationary ones...i like macs

Thank you, i'll get on it.
***** though, as i can't achieve the same effect with one colore based backgrounds.
Why don't Apple just fix it in one of their updates? Left a bug report as this need to be fixed.

Does anyone has problem with the Glossary tab in RB8?

The glossary tab does'nt show on *CHM file. Does anyone has that problem?
1) Install RH8 on XP SP2 and register hhactivex.dll
2) Start RH8
3) Create new project.
4) Click on '+' sign of Glossary from Project Manager to expand it and double click the Glossary(Default) to show the GLossary Pod.
5) Type 'First' in the Term input field on the Glossary Pod, and click the + button to add it.
6) Go to the 'Definition for :first section of the Pod and type in 'First'
7) Save and generate the CHM file
This is the first time I create a new project in RH8 with Glossary.
If I import a previous project created with RoboHelp for Office X4 which has Glossary, and convert project to RH8 format and generate the CHM file, then the CHM file has the Glossary tab.
I can't possibly beleive it is a bug in RH8 . However, what mistake did I make?
This happens on XP SP2, RH 8.0.0.0.203, on XP SP3 with RH 8.0.2.208, on Win7 with RH 8.0.2.208. Basically, it doesn't matter on what PC we install RH8, doesn't matter how many time you register hhactivex.dll, the glossary tab never shows up. Howver, it shoes up on Winhelp.
Thanks

Hi there
No, I don't believe they are ameteurs. Besides, some ameteurs do better work than "professionals".
To be fair, some bugs are elusive. We may see them and report them but when the development team examines things they repeatedly and stubbornly fail to reveal themselves.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

% Character causing problems with the getParameterMap() method:

Hello All,
I've run run across something I've never seen or heard of before. Basically, we have a jsp form that returns form data into a Map object from the request.getParameterMap() method. We have code in place to pull out wrong entity characters that the user may have submitted, like *, &, !, etc... The problem is we have a field that takes a 3 digit code, like 999, but if the user puts in 99%, the percent character messes up the parameter map. The request parameters go out fine from the form, but in the doPost method of the servlet the map gets changed or it changes the request parameters and 99% becomes 99/fastname somehow where f is a jsp variable for the jsp form and lastname would be the name of the next key or % is doing something else that might explain why it's overwritting the first two characters here. Not sure. Has anyone ever seen this before or have any ideas as to how to fix it? Other entity characters don't seem to do this in the app.
Any help or sympathy is appreciated!
Thanks,
James

Well I've done more investigating and I think I've narrowed it down more. We are using JSP's and something I've never seen before, changing an http request/response object after it's been sent to the server.
Here is some of the code:
var url = etc...
var httpRequest = new ActiveXObject('Microsoft.XMLHTTP');
httpRequest.open('POST', url, false);
httpRequest.send();
//I added this code to see what happens to my 99% value.
var xmlDocument = trim(httpRequest.responseText);
message = document.getElementById('3digitfieldName').value;
alert(message);
I added some code in because I want to see when the 99% field value gets changed. When it leaves the form we can see what the value is from: Map paramMap = request.getParameterMap();
It then goes out to the code that changes the request into the new ActiveXObject. Still at this point it's showing 99%, but when it returns back to: Map paramMap = request.getParameterMap(); the value is changed to 99/fonsignees, which is the name of the next field (parameter) of consignees. /f shows up in my debug editor, but when I print out the text it's just showing a box symbol in between 99 and onsignees. f is a variable for the form btw. What I'm thinking is that somehow, MSXML doesn't like the "%" character, but I'm not sure how to fix this?

Does anybody have problems with the Macbook Pro Retina 15' fans being really loud even when playing flash games like candy crush or tetris?

Hey guys,
So after a few months of using the MBP 15' Retina, I've discovered that the fans are incredibly loud even when playing flash games like candy crush or tetris.. are any of you guys having the same problem? Like all of a sudden from be quiet to unbelievably loud just as the games load. So yeah, hopefully someone has the same problem as I am having.
What I was thinking was that the MBP Retina 15' is such a beefed up laptop, it shouldn't require that much CPU to run flash games that are not even THAT graphically intensive to which making the fans that loud..
Thanks!

Believe it or not, Flash REALLY isn't the issue.
It's hardware makers making devices with less processor performance and requiring software makers to fit into a certain requirements of such. Namely iPhone, iPods and iPads.
Flash is designed to give a lot of features and work across many operating systems, browsers and platforms as a write once solution.
Flash has a certain level of processor performance requirement, which hardware makers like Apple want to build less powerful machines using less expensive processors.
Apple has removed Coverflow 3D effects from iTunes and discontinued the 17" MacBook Pro, leaving only the 15" as having a more powerful 3D capable graphics capability.
So Apple is obviously on a anti-heat/performance quest as they further thin up their hardware, trying to kill Flash by punishing Mac users who want to run it.
Flash runs without a fan sound on my older Mac with dedicated GPU and older OS X verison, no sweat.
Head to your System Preferences > Energy Saver and if you have it, uncheck Automatic Graphics switching, this will use the dedicated GPU and shorted battery life, but if your on power should reduce the heat and fan noise.
Another option is to use SMC fan control and set the fan default speed slightly faster, this will keep the machine slightly cooler and not trigger the higher fan speed as often.
If your running 10.8, you will need to System Preferences > Security > downloads to "Anywhere"
SMC FanControl is over at MacUpdate.com.

Re: Does partitionning cause problems with the Toshiba Recovery System ?

Similar Messages

Maybe you are looking for