Re: Dynadock not able to configure properly external monitor

Dear Sir/Madam,
I found a problem with my Dynadock (PA3541EY1PRP) in terms that it is not able to configure properly the monitor (LG Flatron E2250V-PN).
I would make clear that my PC is working under win 7 64bit.
Thanks oodles for your support.
Regards
MAx

ok,
when I connect VGA cable to the dynadock, external monitor apperas to be in low resolution.
Checking in the "screen resolution", windows shows "no monitor" (can I attach a file to show the screenshot?) and the maximum resolution is set at 1440X900. Therefore, I am forced to connect directly the external monitor to the pc. In this case the monitor is properly recognized as "VGA monitor" and the resolution appears to be rightly set at 1920X1080.
thanks

Similar Messages

  • I am not able to configure settings the helpdesk properly.How can it be done?

    i am not able to configure settings  the helpdesk properly.How can it be done?
    This topic first appeared in the Spiceworks Community

    i am not able to configure settings  the helpdesk properly.How can it be done?
    This topic first appeared in the Spiceworks Community

  • Not able to configure SSH

    Hi,
    I'm using 1841 router.My question is I'm not able to configure SSH in this router ,Any IOS problem?
    Sh version
    Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(1c), RELEASE SO
    FTWARE (fc1)

    Hi Karthick
    You are currently running IP BASE Feature Set ios on your router you need to upgrade the same to Advanced Security Services or SP Services Feature set to have SSH support in your router..
    http://www.cisco.com/en/US/products/sw/iosswrel/ps5460/index.html
    regds

  • I am not able to use my external hard drive with my Mac.

    I am not able to use my external hard drive with my Mac. It was initially used with my Windows 7 laptop. Now when I insert my Hard drive in the Mac, it doesn't allow me to delete, format, make folders or copy new files on to my hard drive. I no longer have a Windows PC and am stuck. I tried going to Disc utilities,selected my HD, clicked on Erase and then changed the Format type to MS-DOS (FAT) but no luck .. Any other steps or advice?

    It was likely formatted in NTFS which is readable by the Mac, but not writeable.
    You should be able to reformat the disk in Disk Utility.
    After having copied all the data off of it, you can try re-partitioning it.
    Select the hard drive in the disk list in Disk Utility. Hard drives are the device itself, are left-aligned in the list, and are usually named with the manufacturer, size, and model number.
    Click on the Partition tab.
    Select 1-partition from the partition menu.
    Click the Options button and set to GUID
    Set the format to Mac OS Extended (Journaled)
    Give the Volume a name and click Apply.

  • I purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..

    i purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..

    Has your phone ever been hacked or jailbroken. This error message is what usually shows up for that. Are you using a supported carrier for the iPhone, or did someone hack the phone to unlock it to be used on another carrier. If that is the case, then there is no help you can get here as discussing hacked/jailbroken devices is not allowed.

  • HT1414 just got iPad 3.. not able to configure

    just got iPad 3.. not able to configure.. not able to connect to WiFi, at my location WiFi network exists with proxy settings.. pls Help

    I'd talk to your school tech support and see what settings they have in place. For example, I can't access my work's e-mail via the exchange app but I can via the web access...largely because it's not a work iPad and they won't allow that kind of access on a device that's not 'their own'

  • I bought iphone 4 in US and i and other person not able to listen properly because on the time of conversation voice cracking and difficult to understand each others.so i would like to request you that please solve the above problem.i love my iphone.

    Sir,
    I bought iphone 4 in US.last 6 month me and other person not able to listen properly the voice because the voice is cracking.i have called earlier about the above problem and they said to upload the new verson 6.1.3 and it will be done but after loading this version still i am facing the same problem.so ,i would like to request you that please solve the above problem as soon as you can.I will be thankful to you.i love my apple Iphone.
    waiting for your earliest reply.
    thanks
    Rajeev Gupta

    Hello sir
    As you know about my iPhone 4 which has a problem of voice cracking so I would like to replace to other phone like IPhone 5s.I will pay the replacement charges immediately.i am reaching miami on 19th of janvary 2014 so I would like to request you please arrange my appointment on the Apple store,dadeland mall ,miami at 15.00pm as I will reach miami at 13.00pm and my flight to India at 19.00pm.
    Last time you told to replace at miami on 26th of September but without oppoimtment they have not entertained me.so I would like to request you that please arrange my appointment this time
    I will be thankful to you
    Rajeev Gupta

  • Iphone is not detecting network after updating, i m not able to configure it

    my iphone is not detecting network after updating, i m not able to configure it

    To answer your question there, are you unable to connect to cellular internet (using a SIM or WiFi?

  • Not able to registred the external Web service on CF8

    I am not able to registred the external Web service on CF8 (Error creating web service. Please ensure that you have entered a correct Web Service name or URL.), but same Web service has no problem on CF6.1

    Hi,
    Please close this duplicated thread.
    Thanks & Regards,
    Nagarajan

  • HT1338 not able to access my external hd which i used on my windows pc ntfs3g and mac fuse aren't helping what to do?

    not able to access my external hd which i used on my windows pc ntfs3g and mac fuse aren't helping what to do?

    Bump-I still really need help with this! The connection keeps cutting in and out and I really don't know how to fix it!

  • I' m not able to configure email. I can send messages but I can't receive them

    I need your help.....I'm not able to configure email....I can send messages but I can't receive them

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • I  made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?

    I  made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?
    I have a MacBook Pro with the latest operating system, trying to configure a Gateway flat monitor with vga.
    Thanks

    Apple menu -> System Preferences -> Displays.
    System Preferences can also be found in the Hard drive -> Applications folder.
    Resetting the PRAM can help bring displays back to factory settings if you can't find what you need:
    http://support.apple.com/kb/ht1379

  • Not able to open Communication Channel Monitoring

    Hello All,
        I am not able to open communication Channel Monitoring in Runtime workbench under Component Monitoring. When i am click on Communication Channel Monitoring button following error was thrown. Can anybody suggest me, How to resolve this problem.
    java.lang.NullPointerException
         at com.sapportals.htmlb.table.TableView.getColumns(TableView.java:332)
         at com.sapportals.htmlb.table.TableView.getColumn(TableView.java:350)
         at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setTableSortingStuff(ChannelListTableView.java:556)
         at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setSingleSelectTable(ChannelListTableView.java:393)
         at jsp_channelmonitoring1213186378553._jspService(jsp_channelmonitoring1213186378553.java:257)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
         at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Thanks&Regards,
    VenkatK.

    Hi,
    The error could be because
    1) The URL referenced from RWB (Communictaion Channel) is incorrect.
            Try accesing the link directly http://HOST:JAVAPORT/mdt/channelmonitorservlet
    If you are able to open the window with out nay error, it means you url referenced from SLD is wrong. Correct your SLD and update the cache.
    2) If you are not able to access above URL, it means the java service is not running to accept your request, check in visual admin if any of the services are stopped. Try restarting the same.
    Regards,
    KNS Kumar

  • HT5019 Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.

    Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.

    What have you bought?
    What model Mac are you running?
    What input sources are available on the display you are connecting it to?

  • Not able to configure IDM 11.1.1.7 in RHEL

    Hi,
    Installed below componnets in silent mode
    Java 1.6
    WLS 10.3.6
    IDM 11.1.1.7
    while configuring IDM(for OIF) in silent mode based from response file, it is getting stuck at CREATE DOMAIN. In Install out file, log says starting domain and it stays there for long time. But I am not able to continue further.
    I am seeing below warnings in install log file
    [2015-03-18T16:41:57.229-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/modules/com.bea.core.weblogic.security.identity_1.1.2.0.jar
    [2015-03-18T16:41:57.230-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar
    [2015-03-18T16:41:57.238-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/jrockit_160_14_R27.6.4-18/lib/tools.jar
    [2015-03-18T16:41:57.285-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/wlserver_10.3/server/lib/weblogic_sp.jar
    [2015-03-18T16:41:57.286-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/modules/features/weblogic.server.modules_10.3.2.0.jar
    [2015-03-18T16:41:57.287-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/modules/org.apache.ant_1.7.0/lib/ant-all.jar
    [2015-03-18T16:41:57.287-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar
    [2015-03-18T16:41:57.287-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar
    [2015-03-18T16:41:57.288-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar
    [2015-03-18T16:41:57.288-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar
    [2015-03-18T16:41:57.312-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/modules/org.apache.ant_1.7.0/lib/ant-all.jar
    [2015-03-18T16:41:57.343-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/modules/org.apache.ant_1.7.0/lib/ant.jar
    [2015-03-18T16:41:57.344-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/modules/org.apache.ant_1.7.0/lib/ant-launcher.jar
    [2015-03-18T16:41:57.344-04:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0]  [Action]: Bootstrap Domain Configuration. Library not found: /opt/weblogic/middleware11g/modules/features/weblogic.server.modules_10.3.1.0.jar
    Admin Server is coming up after long time and I am able to access weblogic console.
    But in logs, it trys to connect to admin server and says could not connect.
    [2015-03-18T17:52:29.787-04:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus]  [OOB IDM CONFIG EVENT] onConfigurationStatus ->23389ae6-ec6d-4830-b97e-2510c75ad281 StatusMsg:Connecting to AdminServer.
    [2015-03-18T17:52:29.787-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0] reportStartConfigAction: EXIT........
    [2015-03-18T17:52:29.788-04:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0] [[
    java.io.IOException
      at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
      at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
      at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
      at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
      at oracle.as.provisioning.weblogic.AdminServer.connect(AdminServer.java:98)
      at oracle.as.provisioning.weblogic.ASDomain._connectToAdminServer(ASDomain.java:409)
      at oracle.as.provisioning.weblogic.ASDomain.connectToAdminServer(ASDomain.java:363)
      at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:411)
      at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
      at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:1088)
      at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
      at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
      at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
      at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
      at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
      at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
      at java.lang.Thread.run(Thread.java:662)
    Caused by: javax.naming.ServiceUnavailableException [Root exception is java.net.UnknownHostException: vsvphxoamdev01.hotelgroup.com]
      at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:34)
      at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:792)
      at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
      at weblogic.jndi.Environment.getContext(Environment.java:315)
      at weblogic.jndi.Environment.getContext(Environment.java:285)
      at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
      at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
      at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
      at javax.naming.InitialContext.init(InitialContext.java:223)
      at javax.naming.InitialContext.<init>(InitialContext.java:197)
      at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:178)
      ... 18 more
    Caused by: java.net.UnknownHostException: vsvphxoamdev01.hotelgroup.com
      at java.net.InetAddress.getAllByName0(InetAddress.java:1157)
      at java.net.InetAddress.getAllByName(InetAddress.java:1083)
      at java.net.InetAddress.getAllByName(InetAddress.java:1019)
      at weblogic.rjvm.RJVMFinder.getDnsEntries(RJVMFinder.java:422)
      at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:192)
      at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
      at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:165)
      at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
      at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
      ... 26 more
    [2015-03-18T17:52:29.789-04:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0] [SRC_CLASS: IdMProvisioningEventListener] [SRC_METHOD: onConfigurationError] ENTRY 23389ae6-ec6d-4830-b97e-2510c75ad281
    [2015-03-18T17:52:29.789-04:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
    [2015-03-18T17:52:29.789-04:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError]  [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 23389ae6-ec6d-4830-b97e-2510c75ad281
    [2015-03-18T17:52:29.790-04:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError]  [OOB IDM CONFIG EVENT] ErrorID: 35006
    [2015-03-18T17:52:29.790-04:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Kkibk_c2JRS_uDs1yX1L2UCH000004,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError]  [OOB IDM CONFIG EVENT] Description: [[
    Unable to connect to the AdminServer.
    Cause:
    An internal operation has failed:java.io.IOException
    Action:
    See logs for more details.

    I have verified host file entry also. It looks fine
    -bash-4.1$ cat /etc/hosts
    127.0.0.1 localhost.localdomain localhost
    10.86.60.229 vsvphxoampoc01.hotelgroup.com
    10.86.231.100 phxasn4_bu
    10.86.240.204 phxasn4
    ::1 localhost loopback

Maybe you are looking for