RE: dynamic widget creation

This is a good tech note about this on the Forte website.
-----Original Message-----
From: Matthew Middleton [SMTP:[email protected]]
Sent: Friday, 25 June 1999 11:11
To: [email protected]
Subject: dynamic widget creation
I have done a few windows with dynamic widget creation. Sometimes it
seems I have to have done self.Open before, to get things to appear
properly, and sometimes not.
What I would like is a summation of the issues involved here so I can
write such code without resorting to trial and error.
with advance appreciation,
Matthew
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Tech Note 5156, which I have attached for your information.
-----Original Message-----
From: Foster, Todd [SMTP:[email protected]]
Sent: Saturday, 26 June 1999 1:27
To: 'Jason de Cean'
Subject: RE: dynamic widget creation
? What technote ?
-----Original Message-----
From: Jason de Cean [SMTP:[email protected]]
Sent: Thursday, June 24, 1999 9:19 PM
To: 'Matthew Middleton'
Cc: 'Forte Users'
Subject: RE: dynamic widget creation
This is a good tech note about this on the Forte website.
-----Original Message-----
From: Matthew Middleton [SMTP:[email protected]]
Sent: Friday, 25 June 1999 11:11
To: [email protected]
Subject: dynamic widget creation
I have done a few windows with dynamic widget creation. Sometimes
it
seems I have to have done self.Open before, to get things toappear
properly, and sometimes not.
What I would like is a summation of the issues involved here so Ican
write such code without resorting to trial and error.
with advance appreciation,
Matthew
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>

Similar Messages

Dynamic widget

I'm having a small issue with the new dynamic widget in 3D. I have installed the beta on a desktop and on a laptop. On the desktop, the cursor that's used to replace a lot of the old repousse' functions loads fine, but on my laptop, it does not load its graphic. All the functions seem to be there. If I mouse over, the tooltip changes from bend, twist, taper, extrude etc, and I am able to effect those changes, but the widget doesn't change to the new style. It's just a bigger version of the standard 3 axis widget. Basically, everything is "working", but there's no visual feedback from the widget. I just have to wait for the appropriate tooltip to load before I know which function I am about to effect.
Thoughts?

Tech Note 5156, which I have attached for your information.
-----Original Message-----
From: Foster, Todd [SMTP:[email protected]]
Sent: Saturday, 26 June 1999 1:27
To: 'Jason de Cean'
Subject: RE: dynamic widget creation
? What technote ?
-----Original Message-----
From: Jason de Cean [SMTP:[email protected]]
Sent: Thursday, June 24, 1999 9:19 PM
To: 'Matthew Middleton'
Cc: 'Forte Users'
Subject: RE: dynamic widget creation
This is a good tech note about this on the Forte website.
-----Original Message-----
From: Matthew Middleton [SMTP:[email protected]]
Sent: Friday, 25 June 1999 11:11
To: [email protected]
Subject: dynamic widget creation
I have done a few windows with dynamic widget creation. Sometimes
it
seems I have to have done self.Open before, to get things toappear
properly, and sometimes not.
What I would like is a summation of the issues involved here so Ican
write such code without resorting to trial and error.
with advance appreciation,
Matthew
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>

Dynamic Table Creation & Fill Up

Hello,
Can anyone please guide where I can find examples for dynamic table creation (programmaticaly), with dynamic number of columns and rows, used to place inside text components (or whatever) to fill them with data.
All programmatic.
Using JSF, ADF BC
JDeveloper 10.1.3.1
Thanks
Message was edited by:
RJundi

Hi,
Meybe this article helps: http://technology.amis.nl/blog/?p=2306
Kuba

Does Seeburger's SFTP adapter support dynamic filename creation

Hi all,
Does the SFTP adapter support dynamic filename creation.
If yes, then do we have to use UDF's and are there any specific settings that have to be done in the SFTP communication channel.
Please provide a blog which helps in the configuration process of the above case.
thanks,
younus

Dynamic Creation of File using counter in Seeburger Variable:
1. Configuration Needed in the Communication Channel:
The process of dynamic creation of files can be done we have to select the following checkbox in the receiver channel:
Dynamic Attribute in receiver Channel:
Import the following modules:
Localejbs/Seeburger/solution/sftp
Localejbs/Seeburger/AttribMapper
Localejbs/ModuleProcessorExitBean
Enter the desired file naming convention:
Use the Parameter GetCounter("ID") to the place where the counter is expected to come.
2. Configuration Needed in the SeeBurger Workbench:
If the J2EE server is listening on a port different from 50000 (which is the standard for the SAP client 000), the port number must be configured:
Login into the seeburger workbench using the URL
http://<localhost>:<port number>/seeburger/index.html
Select Property Store.
Create or edit the following property:
Parameter
Value
Namespace
http://seeburger.com/xi/SeeFunctions
Key
provider.servlet.server
Value
http://localhost:50000/ (where the port number 50000 must be set
accordingly to the J2EE server configuration).
Note: The configured value (server URL) has to end with a slash (/). Otherwise,
SeeFunctions will not work correctly.
If we need to start the counter from any specific value , it can be configured in the SeeBurger workbench, this value can be maintained in Mapping Variables :

Does UCM support dynamic page creation on contributor mode.?

Hi All,
Does UCM support dynamic page creation on contributor mode.
We want to create new pages and link it into the existing pages
is that possible?
Thanks
~Hari

You can create new secondary pages in contributor mode - you would normally do this via a dynamic list fragment though technically you could also achieve it by switching region content and creating new data files. You can then use the linz wizard to link between pages.
If you are talking about creating new primary pages and sections in your site then you would need to use something like Site Studio Manager fragment.
Tim

Dynamic Widgets

Hi all,
I have been doing something with Dynamic Widgets whereby I have a Dynamic
SQL that retrieves data from a table in my database. Because of the
dynamic nature of the SQL, I wanted to create dynamic widgets to
display the retrieved data. I have managed to create a list of
dynamic widgets on a window that displays all the data retrieved. But I
do have certain problems that I have come into. Here's the list :
1.) After dynamically generating some datafields, which I have set
the WidthPolicy to SP_NATURAL, I still find that certain datafields
(the address datafield) too short. It is still not accomodating the
full length of my data. Any other way to set that?
2.) According to the Adv. App. Dev. course, we can place the dynamic
widgets into a gridfield so that they align automatically. I have
done that... but I also find that if my retrieve results go to about
50 rows, the gridfield would be enlarged,thus enlarging my window to
a size that is larger than my monitor. I was hoping that there's a
way that Forte could automatically create horizontal bars and
vertical bars on the window form so that we could scroll through the
results. Is that possible? Any workarounds if that's not possible?
Thanks,
Steven Wong,
Distributed Objects Sdn Bhd
Suite 5.04,
Level 5, Wisma Inai,
Jalan Tun Razak,
Kuala Lumpur.
Tel : 603 466 0372
Fax : 603 466 0373
Email : [email protected]
[email protected]

I've been trying for a while to get the ArrayField working, but it seems to
be designed for mapping onto objects that exist at runtime. Dynamic
adjustment of the number of colums in the ArrayField just doesn't seem to
work. So far the only solution i've found is creating a GridField and
filling it with DataFields. You'd have to add you're own code for the
scrollbar and implement the scrolling. As far as i've found out there is no
other usable Tool solution. I can't give you any examples cause this is
where i stopped looking into it. Good luck.
Hedzer van Dijk
KPN Software Huis
Tel: (050 58)54149
E-mail: h.j.vdijkkpn.com <mailto:h.j.vdijkkpn.com>
-----Original Message-----
From: Stanley.L.Yeebankofamerica.com
[mailto:Stanley.L.Yeebankofamerica.com]
Sent: Tuesday, August 22, 2000 12:04 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Creating dynamic widgets
We have a question on how to create something similar to a dynamic
arrayfield
without mapping to an array.
We would like the similar behavior of an HTML table with ability to add
rows
and columns with values.
We have looked at using ActiveX but are not happy with the way Forte
interacts
with these widgets, so we are looking for a Tool
solution. Any help or ideas would be appreciated.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Creating dynamic widgets

We have a question on how to create something similar to a dynamic arrayfield
without mapping to an array.
We would like the similar behavior of an HTML table with ability to add rows
and columns with values.
We have looked at using ActiveX but are not happy with the way Forte interacts
with these widgets, so we are looking for a Tool
solution. Any help or ideas would be appreciated.

I've been trying for a while to get the ArrayField working, but it seems to
be designed for mapping onto objects that exist at runtime. Dynamic
adjustment of the number of colums in the ArrayField just doesn't seem to
work. So far the only solution i've found is creating a GridField and
filling it with DataFields. You'd have to add you're own code for the
scrollbar and implement the scrolling. As far as i've found out there is no
other usable Tool solution. I can't give you any examples cause this is
where i stopped looking into it. Good luck.
Hedzer van Dijk
KPN Software Huis
Tel: (050 58)54149
E-mail: h.j.vdijkkpn.com <mailto:h.j.vdijkkpn.com>
-----Original Message-----
From: Stanley.L.Yeebankofamerica.com
[mailto:Stanley.L.Yeebankofamerica.com]
Sent: Tuesday, August 22, 2000 12:04 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Creating dynamic widgets
We have a question on how to create something similar to a dynamic
arrayfield
without mapping to an array.
We would like the similar behavior of an HTML table with ability to add
rows
and columns with values.
We have looked at using ActiveX but are not happy with the way Forte
interacts
with these widgets, so we are looking for a Tool
solution. Any help or ideas would be appreciated.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Re: Create dynamic widgets.

Hi Kang,
The attached pex contains a window class, which first adds a gridfield to the
window and then inserts 5 toggle fields into it. Clicks on the dynamically
created toggle fields are captured via the ChildClick event on the parent
gridfield.
The resulting window is not pretty (or even useful), but will, I hope,
provide you with some pointers.
At my site, we are working with version 3d. To my delight, I have found that
the widgets can be added to the window before it is opened. With previous
versions, the window had to be open prior to adding any widgets to it.
J. Bryan Johnson

Hi,
I've attached an example of creating datafield and textgraphic dynamically. You may use it as a reference to create toggle field at run time.
Cp wong.
-----Original Message-----
From: Kang Holmes [SMTP:[email protected]]
Sent: Tuesday, August 19, 1997 2:58 AM
To: [email protected]
Subject: Create dynamic widgets.
(436.3 7-23-1997)) id 852564F7.0068E2E0 ; Mon, 18 Aug 1997 15:05:38 -0400
X-Lotus-FromDomain: WORLDBANK
Hi,
Is there anyone can give me some help on how to create dynamic widgets? I
need to build a group of toggle field at runtime and put them in a window
that is generated by Express. I could not find any documents or samples on
how to do that. Do I need to create a gridfield first and insert the
widgets into that gridfield in the tool code?
I appreciate any suggestions and/or samples.
Kang

Create dynamic widgets.

(436.3 7-23-1997)) id 852564F7.0068E2E0 ; Mon, 18 Aug 1997 15:05:38 -0400
X-Lotus-FromDomain: WORLDBANK
Hi,
Is there anyone can give me some help on how to create dynamic widgets? I
need to build a group of toggle field at runtime and put them in a window
that is generated by Express. I could not find any documents or samples on
how to do that. Do I need to create a gridfield first and insert the
widgets into that gridfield in the tool code?
I appreciate any suggestions and/or samples.
Kang

Hi,
I've attached an example of creating datafield and textgraphic dynamically. You may use it as a reference to create toggle field at run time.
Cp wong.
-----Original Message-----
From: Kang Holmes [SMTP:[email protected]]
Sent: Tuesday, August 19, 1997 2:58 AM
To: [email protected]
Subject: Create dynamic widgets.
(436.3 7-23-1997)) id 852564F7.0068E2E0 ; Mon, 18 Aug 1997 15:05:38 -0400
X-Lotus-FromDomain: WORLDBANK
Hi,
Is there anyone can give me some help on how to create dynamic widgets? I
need to build a group of toggle field at runtime and put them in a window
that is generated by Express. I could not find any documents or samples on
how to do that. Do I need to create a gridfield first and insert the
widgets into that gridfield in the tool code?
I appreciate any suggestions and/or samples.
Kang

Dynamic view creation in Flex

I am new to Flex web applications and I am doing research to see if functionality
contained in an existing web application can be replicated in a Flex web app.
We currently have a JSP / Struts based web application that creates a data entry
web view dynamically based on information that describes the different widgets and
their view locations as recieved from the application backend. We are looking at
migrating this application and this functionality to Flex.
When User X selects 1 of any number of data entry views, the Flex application would
receive data from the back end that contains information describing the different widgets
to display on the dynamic view: what type of widget to display ( text field,combo, line,
box, etc), the pixel specific positional information as to where each widget exists in the
view. These data entry views are not something the Flex developer designs or knows
what to expect from the backend. Flex has to generate the view on the fly based on the
information that describes the view.
The question: I fully expect there to be coding within the action scripts; before trying to
learn how to do this, is this something that Flex support.
Thanks,
Brian

Yep, we do something similar. We had to build out the infrastructure, but It works fine. E.g.,
var bDesc:XML = <button x="10" y="5" label="hello world" color="red"/>
var b:Button = new Button();
b.label = bDesc.@label;
b.x = bDesc.@x;
b.y = bDesc.@y;
b.setStyle('color', b.@color);
addChild(b);
In your app, the actual description (XML or other format) would be coming from the server. Then you just add it to the display list (and wire in any event handlers if necessary). In a real setting, you'll need error checking and a more formalized way of doing this, but it works reasonably well. No major snags.

Dynamic Event Creation and Handling the events

Hi All
I am using WAS 6.4.
I have two components say Component A and Component B in which Component A is a reusable component and is used by other components say for e.g the Component B.
The following is the requirement.
Component A should create buttons for other components dynamically.
As an example, Component B specifies to Component A the buttons required say button B1 and button B2.
Component B also contains methods M1 and M2 for the buttons created by the component A.
Now I would like to associate these buttons created by component A with the methods created in Component B
The number of buttons that are to be created may vary from component to component.
If any one as any suggestion or solution, help me out.
Thanks
Regards
NagaKishore

Hi NagaKishore,
     I'm not exactly sure why you want to do this, but it is pretty easy if I switch it up a bit. (Maybe you are trying to create a navigation page or something?)
     Instead of your component B using component A, if you define a Web Dynpro interface in component A, then implement this interface in component B (or all component Bs), achieving your goal would not be too difficult. It could define a generic method (or event) with a "button key" as an argument that would tell component B which button was pressed and allow it to behave as desired. The Web Dynpro interface defined in A could also have an interface context that would allow the the button text to be passed along with (for the sake of simplicity) a "button key" that component that should be triggered when the button is pressed. (Note this could be a varying size list as required.)
     The component B(s) need not be known until run-time. They can be created using something like:
wdThis.wdGet<Used Compontne Name>ComponentUsage().createComponent(<Component Name>,<Object Name (if in a different component)>)
     Once the component is created, the context can be accessed giving the list of buttons to create and the values. The buttons can be created in the wdModifyView during the first pass of the creation of the view displaying the buttons (after the dynamic creation of the used components which can occur in the wdDoInit of the component controller).
     If the user presses a chosen button on component A, then the generic method (most likely an event) of component Bs interface is called and passed the "button key", component B then takes over. Note this would also work if component B had a visualization component that must be displayed through an interface view that is defined on the web dynpro component interface that is implemented by B.
     Hope this helps or at least triggers discussion that will answer your question,
       --Greg

AFAB dynamic variant creation for Posting period.

HI,
Business Requirement :
Business want to run AFAB transaction code every month automatically with schedule job.
system should pick present month period in posting period field.
i checked in variant creation against posting period there is no dynamic " D " in selection variable column.
how can i fix this.

Hi Jani,
Check with abaper if TVARV table can Help you in this case, or create a z program from AFAB. And add date field to it, and schedule job based on that,
I think TVARV table will be a better approach.
Another point to consider here would be that dep should be run once business is ready to do so, and has its own hick ups in business if corrections are required to be made after executing AFAB by job
Regards
Pankaj B.

Dynamic Dialog creation?

Hello,
Can any one tell me how to create Dynamic Dialog, I follow below link but not able to understand properly
http://dev.day.com/docs/en/cq/current/developing/widgets.html#Custom%20Widgets
I want to develope below dialog.
Please tell me the process/steps...
Thanks in advance....

Rahul,
That would entirely depend on how you want your users managed, for example are they ApEx users, are they stored in a database table somewhere, are they stored in an LDAP directory?
As a simple example, if you stored user details in a database table then its as simple as -
1) Create a public page where the user can type in their username and password, this page then writes those details into your table so they can login (obviously your authentication method references the same table).
You can extend this to do the sort of registration you see on most sites, for example -
1) Create a public page to capture the user details, including email address
2) When the user submits the form, you generate a 'validation link' (using whatever method you like) and email that off to the address the user entered
3) User clicks on the link, which runs a procedure to update the status of that user from 'unverified' to 'verified' (for example)
4) User can now login
Without knowing more specifics its hard to advise.

Dynamic Datasource creation

I am trying to create datasources dynamically. Using an example from a previous
post,
mbeanHome = lookupMBeanHome();
JDBCDataSourceMBean dsMBean = (JDBCDataSourceMBean)mbeanHome.createAdminMBean(poolName,"JDBCDataSource",
mbeanHome.getDomainName());
dsMBean.setJNDIName(poolName);
dsMBean.setPoolName(poolName);
dsMBean.addTarget(tserverMBean);
dsMBean.setPersistenceEnabled(false);
How can I retrieve the proper TargetMBean reference to send to the addTarget method.
Does anyone know where I can find an entire class example of dynamically creating
datasources, or something similar.
Thanks in advance,
Fahd

Hi Fahd,
Here is a sample I posted here some time ago
import java.sql.Connection;
import java.sql.SQLException;
import java.util.Iterator;
import java.util.Set;
import javax.naming.Context;
import javax.sql.DataSource;
import weblogic.jndi.Environment;
import weblogic.management.configuration.JDBCDataSourceMBean;
import weblogic.management.configuration.ServerMBean;
import weblogic.management.MBeanHome;
* This class demonstrates dymamic creation,
* using and deletion of DataSource via
* Weblogic management API.
public class DynamicDataSource {
private Context ctx = null;
private JDBCDataSourceMBean dsMBean = null;
private MBeanHome mbeanHome = null;
private ServerMBean serverMBean = null;
// DataSource attributes
private String cpName = "yourPoolName";
private String dsJNDIName = "dynamic-data-source";
private String dsName = "dynamic-data-source";
// Security credentials
private String password = "admPasword";
private String serverName = "yourServer";
private String url = "t3://localhost:7701";
private String userName = "system";
* Creates and starts up a DataSource using
* management API.
public void createDataSource() throws SQLException {
System.out.println("Creating DataSource...");
try {
// Get context
Environment env = new Environment();
env.setProviderUrl(url);
env.setSecurityPrincipal(userName);
env.setSecurityCredentials(password);
ctx = env.getInitialContext();
// Lookup for MBean home
mbeanHome = (MBeanHome)ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
serverMBean = (ServerMBean)mbeanHome.getAdminMBean(serverName,
"Server");
// Delete if DataSource MBean already exists in active domain
Set dsMBeanSet = mbeanHome.getMBeansByType("JDBCDataSource",
mbeanHome.getDomainName());
Iterator iter = dsMBeanSet.iterator();
while(iter.hasNext()) {
JDBCDataSourceMBean dsmb = (JDBCDataSourceMBean) iter.next();
if (dsmb.getJNDIName().equals(dsJNDIName)) {
dsMBean = dsmb;
deleteDataSource();
break;
// Create DataSource MBean
dsMBean = (JDBCDataSourceMBean)mbeanHome.createAdminMBean(
dsName, "JDBCDataSource",
mbeanHome.getDomainName());
// Set DataSource attributes
dsMBean.setJNDIName(dsJNDIName);
dsMBean.setPoolName(cpName);
// Startup datasource
dsMBean.addTarget(serverMBean);
} catch (Exception ex) {
throw new SQLException(ex.toString());
* Symply gets and closes a connection from dynamic
* DataSource. Will throw a SQLException if datasource
* does not exists.
public void createConnection() throws SQLException {
System.out.println("Getting Connection...");
try {
DataSource ds = (DataSource)ctx.lookup (dsName);
Connection conn = ds.getConnection();
conn.close();
} catch (Exception ex) {
throw new SQLException(ex.toString());
* Shuts down and deletes DataSource from configuratrion
* using management API.
public void deleteDataSource() throws SQLException {
System.out.println("Deleting DataSource...");
try {
// Remove dynamically created datasource from the server
dsMBean.removeTarget(serverMBean);
// Remove dynamically created datasource from the configuration
mbeanHome.deleteMBean(dsMBean);
} catch (Exception ex) {
throw new SQLException(ex.toString());
public static void main(String args[]) {
DynamicDataSource dds = new DynamicDataSource();
try {
dds.createDataSource();
dds.createConnection();
dds.deleteDataSource();
} catch (SQLException ex) {
ex.printStackTrace();
"Fahd" <[email protected]> wrote in message
news:[email protected]...
>
I am trying to create datasources dynamically. Using an example from aprevious
post,
mbeanHome = lookupMBeanHome();
JDBCDataSourceMBean dsMBean =(JDBCDataSourceMBean)mbeanHome.createAdminMBean(poolName,"JDBCDataSource",
mbeanHome.getDomainName());
dsMBean.setJNDIName(poolName);
dsMBean.setPoolName(poolName);
dsMBean.addTarget(tserverMBean);
dsMBean.setPersistenceEnabled(false);
How can I retrieve the proper TargetMBean reference to send to theaddTarget method.
>
>
Does anyone know where I can find an entire class example of dynamicallycreating
datasources, or something similar.
Thanks in advance,
Fahd

MXML Dynamic Object Creation

Hi ,
Static Object Creation :
Eg:
<mx:Fade id="ViewStack_EffectStart" duration="500" alphaFrom="0.0" alphaTo="1.0"/>
<mx:Fade id="ViewStack_EffectEnd" duration="500" alphaFrom="1.0" alphaTo="0.0"/>
<comp:ErrorBox id="errorBox" active="{active}" showEffect="{ViewStack_EffectStart}" hideEffect="{ViewStack_EffectEnd}"/> .
The above static objects is working fine, but the problem is that we have lot of similiar static object which creates a memory issue.If we create dynamic objects, will it avoid the issue.Is dynamic objects advisible?.
Thanks in advance.Please reply ASAP.
Thanks ,
San.

hmn.. I don't understand your questions fully.
What about create the fade object in "Model" and reference the same Fade object for all dynamic objects?
or r u asking to find out how to create fade in actionscript?
var fade:Fade = new Fade();
fade.target = this;
fade.alphaFrom = 0;
fade.alphaTo = 1;
fade.play();
hope this helps,
BaBo,

RE: dynamic widget creation

Similar Messages

Maybe you are looking for