Re edit a finished video

Is it possible to re-edit a video, after it is finished?
either with imovie or final cut.
To remove/edit the titles?

When you say 'finished' do you mean it is already on a DVD?

Similar Messages

Sound Volume on Finished Video not as Loud as in Editor

Hi, when I play my video back after it has been made into a video file. (it plays back in windows media player) it is a bit quieter than when it is played in the editor. This is a little annoying because I got the sound right in the ditor - so it is too quiet now. I used 2 was to boost the audiotrack - I used the Audio Gain option to boost the sound to a certain extent and for the rest I used the track volume slider in 'Sceneline' where you can adjust the volume for a whole track. I am wondering if only the 'Audio gain' part has come through to the finished video. Is this normal? Thank you for any help.
Rich

Rich,
It is highly possible that PE and WMP are using different settings on your audio sub-system. What are the Edit>Preferences>Audio Hardware setting for PE, and also the ASIO settings? I do not believe that WMP has a place to adjust any real settings that would affect audio - other than the slider on the control console.
To obtain the loudest audio possible, without (much) distortion, you can open Audio Mixer and ride the gain to where you are in the yellow below 0db for all peaks. Do not let the meters get to the red.
You might also have some luck with the Normalize Effect (Audio Effects) and choose 0db as the Normalization limit. You could also do the same in Audition, or Audacity.
In Audition and in PrPro, the meters have a nice feature - any peak that hits red, will trigger a light (a block of red) at the top for every play session. All you have to do is look at the meters when your done, and if there's a red light, some peak hit it. Watching the meters respond tells you the same thing.
Also be aware that YouTube will likely recompress your Audio and Video, so what you upload might not be what is posted. Then there is the problem that you have no control on how those, who view your piece, will have their systems set. A lot of variables to consider.
That is why I always mix to what I believe is the best level and leave it at that. I have no control over how my DVD will be played, on what sort of system it will be played, and how the viewer will have their system set up. Some believe that they should mix to the "lowest common denometer," which would be a 3" TV speaker. I mix to the best, and let the user figure it out.
Good luck, and please post a link, when done - I will remember to turn my system's audio down! [Grin]
Hunt

Reimported finished videos get bigger.

Here's another odd behavior I see in Premiere Pro CS6.0.5. Just noticed this last night. I have a video I finished in Premiere as a H264, 16:9 HD 720p at 29.97fps .mp4 file. Looks good and plays well. I decided I wanted to add a scene at the very end, so today I loaded it back into Premiere. Lo and behold, the video has enlarged to a much bigger size!! Since it still fills the whole 16:9 area, it looks like half the image has been cropped off around the outside and the remainder enlarged to fill the screen. And if not fixed, it Exports this way as well.
Fortunately, it is easily fixed by going into Effect Control, Motion, and then Scaling it back to normal size, but that's extra work and slightly slows down any renders.
Usually when I finish edit a video, I don't have need to bring it back into Premiere, so when I saw this for the first time today, it really puzzled me. I tried a few other videos I'd finish edited in the same format. They all do this! Very strange. Again, this is not a problem for me as they are easily fixed, but I'm quite courious about why this is happening!
Any ideas? Thanks!

I agree about not bringing a finished video back into Premiere for editing, but I thought I was finished with it and it was not an important project, just an experiment. So when I thought I was finished with it, I deleted the original media to save disk space. And while, as I said, I agree with you on this, that doesn't explain the stated problem.
I also agree that it is probably some mismatch between Sequence Settings and the Export settings. I think this may be because I'm still fairly new to Premiere, and I don't fully understand Sequence Settings. One window that opens when I first start Premiere is called the New Sequence window. This appears to be where I'd set up Premiere from the specs of my clips (almost always .mov HD files at 1290x720 29.97fps NTSC), but none of the choices in that window equal my footage. Most of them are for DV footage (which indeed has smaller size then my 720p clips). I suppose I could make a custom setting but I'm not sure just how.
Any ideas?

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?
I have PremierePro-CS5 installed.
This stereo 3D camcorder (Sony HDR-TD10E), output an .MVC (MultiViewCoding) file, coded in H.264 format.
This format is already compatible with Bluray3D stereoscopic format.
1) But, how to edit the .MVC in Premiere?
2) What plugin should I use (if exists) for PremiereProCS5?
3) Cineform Neo3D, can manage the .MVC format? Can convert it to Cineform format file, for import it into Premiere?
4) What software should I use to convert an .MVC video to an AVCHD H.264 file, and import it into PremierePro CS5 or CS5.5 for editing?
Thanks!
Horsepower0171.

Sorry, I am Italian, it is very difficult for me to understand what he says!
I can just read the english text, or follow the actions of a videotutorial!
Thus my question is the same:
-What software can do that?
-Sony Vegas 10 do the Bluray3D authoring?
-For MVC editing, should I wait for Adobe CS6? Or is it planned an update for CS5.5?

I keep getting the message "macintosh hd disc full" when I try to edit or import video. How can I make room?

I keep getting the message "macintosh hd disc full" when I try to edit or import video. How can I make room?

You can go to Applications, Utilities, Activiy Monitor to see just how much space is available. To free space you need to remove files that take a lot of space, things like videos, photos, music. Get an external hard drive, OWC http://www.macsales.com has a good selection, and move material off the internal drive.

I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync. They work fine when played in Quicktime.

Hello,
I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program. It appears to work fine in Quicktime.
Thanks in advance.

mbgoodwi
Thanks for the reply. This is the plan.
Open Premiere Elements 12/12.1 to the Expert workspace.
In the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, select the project preset
NTSC
AVCHD
AVCHD LITE 720p30
OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
There should be no colored line over the content if the project preset matches the video properties. But, if you do see
that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
the Render button above the Timeline.
Do your video/audio now play back in the Edit area monitor in sync?
Please let us know the result, and then we will decide what next.
Thanks.
ATR

Finished video so speedy.

I am doing combine two files that AVI and MPEG through PE. These files have normal speed. However, finished video after publishing is so speedy almost double times.
I did other files, they were ok. only some files have a trouble. I check the condition of original troubled files but it was ok.
Anybody know the tip to fix this problem?
Thanks,

inhee Lee
What version of Premiere Elements are you using and on what computer operating system is it running?
Please give the following information
a. Before .....AVI. What kind of avi file - What is the video compression? What is the frame rate (including interlaced or progressive)?
After you import this .avi file into your Premiere Elements project, what does the Interpret Footage dialog show for frame rate and pixel aspect ratio?
b. Before....mpeg file - What is the video compression? What is the frame rate (including interlaced or progressive)?
After you import this .mpeg file into your Premiere Elements project, what does the Interpret Footage dialog show for frame rate and pixel aspect ratio?
What are you selecting for your export settings Publish+Share/Share/ then what and what preset? Are you using the default settings for the preset or are you customizing the preset under its Advanced Button/Video Tab?
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Using Slip Edit tool on video and linked audio

Am not able to do a slip edit on a video clip that has a linked audio track w/o the two falling out of sync. After doing a slip edit on the video I have to go back and do a slip edit on the audio track separately, even though it is marked as linked, in order to re-align it w/ the video. Shouldn't I be able to do one slip edit on both the video and audio tracks at the same time and keep them in sync?
Jack

I understand that they're linked. If they're underlined they're linked. Linked selection is different. It's the behavior that controls what happens when you select a clip in the timeline. Check the linked selection button in the upper right of the timeline or check the Edit menu or use Shift-L.

An Idea of What Techniques Were Used in Editing This Music Video?

hi forum,
im a music producer from japan, who has recently gotten into video editing/production.
i just wanted to ask if anyone could shed some light on the techniques that were used in editing the following video:
i know the song is horrible, but i love the animation, which i assume is a combination of photoshop and after effects?
does anyone have a basic idea of what is being done? im not looking for specific tutorials, just some insight on what direction i should head in if i want to create something similiar.
anyway, thanks for reading, looking forward to any replies!

Lots of vector art and lots of 3D tracking to get things to line up and look like they are part of the scene. You can do the same thing with Mocha and corner pin tracking but it's much easier with a real 3d tracker like Camera Tracker or SynthEyes

How do i edit a vertical video in final cut x?

i can't seem to get final cut x to edit in a vertical aspect ratio, is there any way to do this?

You can only edit in standard video formats. You could edit in a standard horizontal format and crop it in another application, but I think there would be some degradation in quality.

AE 12.1 Crash: "There was more than one edit in the video track"

Here's the last log message: Last log message was: <140735209366288> <ImporterQuicktime::NativeReaderGetInfo> <5> There were more than one edit in the video track, defer to non-native quicktime for 0x1308a73a8.
iMac 27-inch, Late 2012
Software OS X 10.9
Graphics: NVIDIA GeForce GTX 680MX 2048 MB
Memory 24 GB 1600 MHz DDR3
Processor 3.4 GHz Intel Core i7
Areca 8050 RAID6 config (Thunderbolt)
AE 12.1 (Crash initially occured in previous version, which I don't know what it was - AE CC, but I don't know exact number - problably whatever the most recent update was)
My project has a bunch of ProRes files referenced... even when I move them, and After Effects marks them as offline, I just get this: Last log message was: <140735209366288> <ae.blitpipe> <2> Making New Context.
I have done some searching, and even if I go to Google, and put the search in quotes, I get nothing. It doesn't sound like anyone else has had just this problem.
Help?

Sounds like the ProRes files are encoded oddly in a format that AE's own handler can't understand and while falling back to QT it crashes. I believe there are some known issues with this for ProRes 444, but then again I'm not a Mac guy...
Mylenium

I upgraded to PSE 10 and am not able to e mail my finished video.....I was always to send them off !

I recently upgraded to Photoshop 10 and find I am not able to e mail my finished video ????

HI JEFF...................YES I UPGRADED TO PSE 10........NOT PREMIER...............AND I JUST SOLVED THIS.........WHAT HAPPENED IS WHEN I COMPLETED MY SLIDE SHOW (WITH MUSIC)....(I LOVE MUSICAL SLIDE SHOWS), I ACCIDENTLY SENT IT SOMEWHERE OTHER THAN "MY VIDEOS".........(I STILL CAN'T FIND IT).............SO WHEN I REALIZED THIS; I DID THE WMV AGAIN AND CORRECTLY SENT IT TO MY VIDEOS FILE..SO ALL'S WELL BUT............NOW THAT I HAVE YOUR ATTENTION MAY I PLEASE ASK YOU ABOUT ANOTHER PROBLEM...........I NOTICE WHEN I SEND THESE VIDEOS OFF THAT ANY ONE VIEWING THEM CAN COME INTO MY LIBRARY SIMPLY BY CLICKING THE FOUR DOT SQUARE WHICH LOOKS LIKE THE TOOL TO ENLARGE THE VIDEO SCREEN.........IF YOU PLACE THE CURSOR ON IT IT READS........."SWITCH TO LIBRARY"...........I DID THIS AND REALIZED ANYONE VIEWING MY VIDEOS CAN GO INTO MY PICTURE LIBRARY AND POSSIBLY A FEW OTHER PLACES...................THIS DISTURBS ME.............CAN THIS BE CORRECTED?

With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR

How to edit iPhone 5 video in Premiere Pro CS6?

I am new to Premiere Pro CS6 (new to video actually), and iPhones as well, and was wondering if there is a detailed procedure on editing iPhone 5 video in Premiere Pro CS6. Do I just attach the phone to the computer like any movie camera?

>new to Premiere Pro
A good place to start is the tutorial list in message #3 http://forums.adobe.com/message/2276578

I bought a iPad2 with ios5 on it, I bought imovie in App Store, I edited a short video 1m 30sec, I transfered it on iTune newly upgrated, I see my vid in iTune , I put it on my imac os x 10.6.8 with imovie 11. I cannot see this vid! Have I mistaken somwh

I bought a iPad2 with ios5 on it, I bought imovie in App Store, I edited a short video 1m 30sec, I transfered it on iTune newly upgrated, I see my vid in iTune , I put it on my imac os x 10.6.8 with imovie 11. I cannot see this vid! Have I mistaken somewhere?
I feel quite upset to not use this function, because it is one of the reasons Ibought this device. To be almost free, anywhere I want, I take my Ipad , whrite, shoot, edit, and post to report the experience I live.

I bought a iPad2 with ios5 on it, I bought imovie in App Store, I edited a short video 1m 30sec, I transfered it on iTune newly upgrated, I see my vid in iTune , I put it on my imac os x 10.6.8 with imovie 11. I cannot see this vid! Have I mistaken somewhere?
I feel quite upset to not use this function, because it is one of the reasons Ibought this device. To be almost free, anywhere I want, I take my Ipad , whrite, shoot, edit, and post to report the experience I live.

Re edit a finished video

Similar Messages

Maybe you are looking for