Re emailing photos from iPhoto: after I create an event, I later add captions, each one beginning with a number. I'd like to email a set of these photos in the order they are captioned, not the original order of the event. How do I do this?
I take a number of photos of an event which I download into iPhoto as an Event. I later add captions to some of the photos in the Event, and I want to share them by email IN THE ORDER OF THE CAPTIONS RATHER THAN IN THE ORDER THEY APPEAR IN THE EVENT. Each caption begins with a unique number followed by text. How can I email them in the order of the caption numbers?
You can't, block capitals notwithstanding. Try using numbered Filenames. But remember how it's all received at the other end is entirely based on the settings on the recipients machine, so it might well be moot.
Similar Messages
-
when adding a new photo to an album in iPhoto 8 it changes the order of the photos in the album; how do I stop this ?
View Menu -> Sort Photos...
-
When I click to view my photos a question mark appears and will not let me view my picture. How do I fix this?
Suggests a permissions issue in the Library.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to check and repair Library permissions -
I have set up iMessages on my ipad in error now I'm not receiving any messages on my iphone, can anyone advise how to fix this or just undo everything I have done, don't necessarily need messages on my ipad
Hi there Shwalks,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
-Griff W. -
my phone froze, so i restarted it with the pin number, but now it needs further info and needs a password for the network . how do I retrieve this password?
In needs a password for WHAT network? If you're talking about a WiFi network, you'll have to ask whoever owns the network. We have no way of knowing.
-
how can I find our photos on our iPad they are not in photo stream but have been sent from our iPhone over icloud
Hi...
Tap the Photos icon in the Dock at the bottom of of the screen.
If you don't see the photos there, tap Settings > iCloud
Turn Photo Stream off then back on then restart your iPad.
Hold the power button until "slide to power off" appears. Slide to power off. After it is off, press the power button to turn it back on -
When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)
Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go. -
I have installed Itunes 10.5 on my PC and I have turned photostream on on my Ipad2 and Iphone. The photos sync fine but they are not showing up on my PC. What's the problem? I can see my photos on my ipad and Iphone. I want to be able to see them on my PC when I take pictures from my Iphone and Ipad. How do I see Photostream on my PC?
You have to install the iCloud control panel for windows, then sign in with you apple ID, and check what you want to sync.
link: http://support.apple.com/kb/DL1455 -
Revision: 12827
Revision: 12827
Author: [email protected]
Date: 2009-12-10 19:03:29 -0800 (Thu, 10 Dec 2009)
Log Message:
Removed the accessibility implementation for WindowAccImpl and WindowedApplicationAccImpl as they are likely not needed. In their current form they were preventing the accessibility of child components from being exposed.
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Removed Paths:
flex/sdk/trunk/frameworks/projects/airspark/src/spark/accessibility/WindowAccImpl.as
flex/sdk/trunk/frameworks/projects/airspark/src/spark/accessibility/WindowedApplicationAc cImpl.asRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
I received a link to fill out a document on this site through email. However, when I click the link, it just directs me to my FormsCentral homepage and there are no documents for me to fill out. How do I find this document or stop myself from just being redirected to my homepage?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
my iPad was stolen in brazil. i cannot get the manufacturer id number from my iPhone or my macbook air....they are all linked together though. any suggestions on how and if i can possibly retrieve this and thus locate the device? thanks julie
Launch iTunes, go to the Preferences, select Devices, and hover your cursor over the backup file for the iPod. That should show you the serial number, IMEI, and possibly the MEID.
The manufacturer ID will not help you locate the iPad, though. If you set up the Find My iPad service in the Settings prior to the iPad going missing, then there is a chance that can be tracked, though it depends on a number of factors (the iPad is turned on, connected to a WiFi or 3G network, and has not had the Find My iPad service disabled or the iPad been completely restored).
If you did not set up Find My iPad, then there is no way to track it. Contact the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance).
Regards. -
Should i delete my photos from iPhoto after I import to aperture
should i delete my photos from iPhoto after I import to aperture? What is the easiest way to do this?
Depends.
Did you copy the files into the Aperture Library on Import?
If so, it's safe to do so. My tip: wait a few weeks until you're happy that you're committed to Aperture.
Drag the iPhoto Library from the Pictures Folder to the trash.
Regards
TD -
istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me
Hi
So these are EXS24 Sampler Instruments?
If yes... the .exs Instrument files need to go in
Library:Application Support:Logic:Sampler Instruments
Or
<User>:Library:Application Support:Logic:Sampler Instruments
CCT -
I used "my documents" for the profile folder, I removed the profile and firefox asked if i want to remove its file, and it took ALL my file except a few, all my photographs etc, are these now unrecoverable? as they are not in the recycle bin
disaster, thanks firefox 1 year of photos lostThanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again. -
I am trying to sync a new ipad with a mac but do not want to sync the 15000 photos from my mac to the ipad - how do I prevent this?
See Here,
Syncing photos via iTunes
From here...
http://www.apple.com/support/ipad/syncing/
And Here...
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
Maybe you are looking for
-
NT security problems with file I/O
I have 2 problems with file I/O. When I read from a file I use the getAbsolutePath() method that is part of the File class to find what directory the files are currenlty. The problem is that the returned path says that the file is on the desktop no m
-
Logical data base in Web dynpro
Hi all, I want to add LDB (PNP) into my web dynpro program.by which i can get the data from database to the Application server.After Authrization check. I also want to use Infotypes 0082 in my program. Points will be sured. Thanks.
-
Hi guys, I bought a Macbook Pro in Augest. As soon as I got it, I tried to use photo stream. It worked perfectly when I use my iPod touch to take a picture; it will automatically send my photo to the mac. But, now the photo stream is not working. I w
-
Hello everybody, My Macbook Pro is a little bit slow (since I updated to Mavericks....) so I searched what I can do to make it a bit faster... And while searching I thought I could also tidy up my Mac, even though this won't help a lot.. So I started
-
Newsbeuter:custom colors show fine in urxvt alone -tmux just blk+white
hoping my lack of detail here isn't foolish. I'm running a fairly minimalistic DWM system and as the subject tried to say, in urxvt newsbeuter observes the custom colors I've set in it's conf. Yet, when a tumx instance (in urxvt) is used loading news