Re-enable Nteowk Adapter

I accidentally disabled the network adapter while remotely controlling my server. Is there anyway to re-enable the adapter remotely? It's 800 miles away.

Hi,
If the server is a virtual machine, as Dave said, you can use console to enable it.
If it's a physical server, you may use out-of-band management (such as HMC,iDRAC) to enable it.
If you haven't configured the out-of-band management or the server doesn't have a out-of-band management , you may ask local site administrator for help.
Steven Lee
TechNet Community Support

Similar Messages

Reason 442: Failed to Enable Virtual Adapter - Windows 7 64 bit

Some details about the issue.
I'm trying to connect to my client's network using VPN Client version 5.0.07.0290. The user authetication is done by providing RSA SecureID token value. After entering proper credentials, the client window gets struck at 'Securing Communication Channels...' message in status bar and reports 'Reason 442: Failed to Enable Virtual Adapter' error after few mintues. I have confirmed that this version works for other people in my team , so I'm guessing it has something to do with my system settings than the client itself.
Below are the trobleshooting tips that I have already tried.
1. Uninstall and Reinstall the client.
2. Enable WinXP SP2 compatability for ipsecdialer.exe and vpngui.exe.
3. Clicking 'Diagnose' on the Citrix Virtaul Adapter connection in Networks and Sharing centre, reports no issues.
4. Enabling Network sharing for Local Area Network and disaling Wireless Networks
I'm running Windows 7 64 bit Enterpise OS.
Appreciate any suggestions to resolve this issue.
Thanks,
PVNSKC
Update: 9/7/2011
OK, things look much better after a good vacation, always!!!
I tried to connect today by reinstalling the client after a weekend shutdown (I don't believe the cold reboot stuff, but hey, worth a try! ) and it did work. The only change I did today was to disable the Wireless Connection adapter in Networks Connections. I'm not sure whether that fixed or not cause I had tried that already. Anyway, below is my current configuration which is working for now!
1. Below executables are running in the XP compatability mode.
cvpnd.exe, VAInst64.exe, vpngui.exe
2. Local Area Connection is allowed for 'Sharing'
3. Registry is updated with below entry.
HKLM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REG_DWORD /d 0 /f
4. Wireless Connection is disabled.
Thank you all for the responses.
PVNSKC

Hi,
Duplicate IP Address Triggers Error 442 on Windows 7 and Vista
The following error "Reason 442: failed to enable virtual adapter" appears after Windows 7 and Vista reports a duplicate IP address detected. Subsequent connections fail with same message, but the OS does not report a duplicate IP address detected.
To work around error 442, do the following steps:
Step 1 Open "Network and Sharing Center".
Step 2 Select "Manage Network Connections".
Step 3 Enable the Virtual Adapter ("VA"—Cisco VPN Adapter).
Step 4 Right-click on Cisco VPN Adapter and select "Diagnose" from the context menu.
Step 5 Select "Reset the network adapter Local Area Connection X".
If this procedure does not work, run the following command from cmd:
reg add HKLM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REG_DWORD /d 0 /f
Then reboot.
This resolves the issue until the OS reports a duplicate IP address again. Follow the preceding steps to resolve it again.
If that doesn't work, you might have UAC enabled. If so, you must run cmd as administrator and repeat the previous registry workaround.
NOTE: You mentioned step 4 already, try the whole sequence again, if the steps does not work then try the registry key.
Hope this helps,
Sian

Failed to enable Virtual Adapter in Windows 8

Hello
I got a problem when using Cisco VPN client 5.0.04.0300 in Windows 8...today
Error as following:
Reason 442: Failed to enable Virtual Adapter.
Logs here:
1      20:48:21.787 03/01/12 Sev=Warning/3         CVPND/0xE340000C
The Client was unable to enable the Virtual Adapter because it could not open the device.
2      20:48:21.807 03/01/12 Sev=Warning/3         CVPND/0xE340000C
The Client was unable to enable the Virtual Adapter because it could not open the device.
3      20:48:21.807 03/01/12 Sev=Warning/2         IKE/0xE300009B
Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
4      20:48:21.807 03/01/12 Sev=Warning/2         IKE/0xE30000A7
Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
I'm using a laptop which belongs to the company...this is really urgent.
Can anybody help me!!?
Really appreciate any feedback!!!
Snail

thank you so much for your reply.
I'm considering to restore to Windows 7 cuz I use those apps very offen..
thanks again...

64bit vpn client issue /error :reason -442:failed to enable virtual adapter.

Hi All of you ,
I m using vpn client for windows64bit - file name - vpnclient-winx64-msi-5.0.07.0290-k9.exe and installing it on windows 2003 server .
But while connecting via vpn client to f/w , Virtual Adapter is taking the ip address but not connecting .getting error message on screen -
reason -442:failed to enable virtual adapter.
Is it possible some configuration or image issue from ASA as its first time we are trying to use 64bit OS , vpn client for 32bit OS working fine .
Below are the logs from vpn clinet when i tried to connect to ASA5520 . Version 7.0(8) -
Cisco Systems VPN Client Version 5.0.07.0290
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.2.3790 Service Pack 2
Config file directory: C:\Program Files (x86)\Cisco Systems\VPN Client\
1      15:38:03.921 01/27/11 Sev=Info/4 CM/0x63100002
Begin connection process
2      15:38:03.937 01/27/11 Sev=Info/4 CM/0x63100004
Establish secure connection
3      15:38:03.937 01/27/11 Sev=Info/4 CM/0x63100024
Attempt connection with server "203.199.30.190"
4      15:38:04.125 01/27/11 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
5      15:38:04.140 01/27/11 Sev=Info/4 CM/0x63100015
Launch xAuth application
6      15:38:09.515 01/27/11 Sev=Info/4 CM/0x63100017
xAuth application returned
7      15:38:09.515 01/27/11 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
8      15:38:10.562 01/27/11 Sev=Info/4 CM/0x63100019
Mode Config data received
9      15:38:10.781 01/27/11 Sev=Warning/2 CVPND/0xE340002C
Unable to enable the 64-bit VA after timeout
10     15:38:10.781 01/27/11 Sev=Warning/3 CVPND/0xE3400029
The Client failed to enable the Virtual Adapter on 64-bit Windows
11     15:38:10.781 01/27/11 Sev=Warning/2 CM/0xE310000A
The virtual adapter failed to enable
12     15:38:10.781 01/27/11 Sev=Info/6 CM/0x6310003A
Unable to restore route changes from file.
13     15:38:10.781 01/27/11 Sev=Info/6 CM/0x63100037
The routing table was returned to original state prior to Virtual Adapter
14     15:38:10.859 01/27/11 Sev=Info/4 CM/0x63100035
The Virtual Adapter was disabled
15     15:38:10.859 01/27/11 Sev=Warning/2 IKE/0xE300009B
Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
16     15:38:10.859 01/27/11 Sev=Warning/2 IKE/0xE30000A7
Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
17     15:38:11.546 01/27/11 Sev=Info/4 CM/0x63100012
Phase 1 SA deleted before first Phase 2 SA is up cause by "Unknown". 0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
18     15:38:11.546 01/27/11 Sev=Info/5 CM/0x63100025
Initializing CVPNDrv
19     15:38:11.578 01/27/11 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 0.
20     15:38:40.953 01/27/11 Sev=Info/4 CM/0x63100002
Begin connection process
21     15:38:40.953 01/27/11 Sev=Warning/2 CVPND/0xA3400019
Error binding socket: -21. (DRVIFACE:1234)
22     15:38:40.968 01/27/11 Sev=Info/4 CM/0x63100004
Establish secure connection
23     15:38:40.968 01/27/11 Sev=Info/4 CM/0x63100024
Attempt connection with server "203.199.30.190"
24     15:38:41.156 01/27/11 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
25     15:38:41.171 01/27/11 Sev=Info/4 CM/0x63100015
Launch xAuth application
26     15:39:08.031 01/27/11 Sev=Info/4 CM/0x63100017
xAuth application returned
27     15:39:08.046 01/27/11 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
28     15:39:09.093 01/27/11 Sev=Info/4 CM/0x63100019
Mode Config data received
29     15:39:09.312 01/27/11 Sev=Warning/2 CVPND/0xE340002C
Unable to disable the 64-bit VA after timeout
30     15:39:09.312 01/27/11 Sev=Warning/3 CVPND/0xE340002A
The Client failed to disable the Virtual Adapter on 64-bit Windows
31     15:39:19.937 01/27/11 Sev=Warning/3 CVPND/0xA340000D
The virtual adapter was not recognized by the operating system.
32     15:39:19.937 01/27/11 Sev=Warning/2 CM/0xE310000A
The virtual adapter failed to enable
33     15:39:19.937 01/27/11 Sev=Info/6 CM/0x6310003A
Unable to restore route changes from file.
34     15:39:19.937 01/27/11 Sev=Info/6 CM/0x63100037
The routing table was returned to original state prior to Virtual Adapter
35     15:39:20.109 01/27/11 Sev=Warning/2 CVPND/0xE340002C
Unable to disable the 64-bit VA after timeout
36     15:39:20.109 01/27/11 Sev=Warning/3 CVPND/0xE340002A
The Client failed to disable the Virtual Adapter on 64-bit Windows
37     15:39:20.281 01/27/11 Sev=Warning/2 CVPND/0xE340002C
Unable to disable the 64-bit VA after timeout
38     15:39:20.281 01/27/11 Sev=Warning/3 CVPND/0xE340002A
The Client failed to disable the Virtual Adapter on 64-bit Windows
39     15:39:20.578 01/27/11 Sev=Warning/2 CVPND/0xE340002C
Unable to disable the 64-bit VA after timeout
40     15:39:20.578 01/27/11 Sev=Warning/3 CVPND/0xE340002A
The Client failed to disable the Virtual Adapter on 64-bit Windows
41     15:39:20.953 01/27/11 Sev=Warning/2 CVPND/0xE340002C
Unable to disable the 64-bit VA after timeout
42     15:39:20.953 01/27/11 Sev=Warning/3 CVPND/0xE340002A
The Client failed to disable the Virtual Adapter on 64-bit Windows
43     15:39:21.437 01/27/11 Sev=Info/4 CM/0x63100035
The Virtual Adapter was disabled
44     15:39:21.437 01/27/11 Sev=Warning/2 IKE/0xE300009B
Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
45     15:39:21.437 01/27/11 Sev=Warning/2 IKE/0xE30000A7
Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
46     15:39:22.046 01/27/11 Sev=Info/4 CM/0x63100012
Phase 1 SA deleted before first Phase 2 SA is up cause by "Unknown". 0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
47     15:39:22.046 01/27/11 Sev=Info/5 CM/0x63100025
Initializing CVPNDrv
48     15:39:22.062 01/27/11 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 0.
release notes for vpn client 64bit -
http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

Hi Anisha ,
Exact version of OS is "Microsoft Windows Server 2003 x64" .
I need supported cisco vpn client for this OS .
=========
Thanx 4 reply .
Raj

442 Error - Failed to enable Virtual Adapter

Windows 8, I am trying to connect on VPN and I only receive this error : 442 - Failed to enable Virtual Adapter.

Install Citrix Deterministic Network Enhancer to solve Cisco IPSec VPN issue with Windows 8/8.1. Check below guide,
http://www.vmwareandme.com/2013/12/solved-windows-8-and-windows-81-cisco.html
www.mytricks.in

Unable to enable the adaptive firewall: No ALTQ support in kernel ALTQ related functions disabled

No ALTQ support in kernel ALTQ related functions disabled
OS X Server: How to enable the adaptive firewall - Apple Support
Recently ran the latest OS X Yosemite Server Updates: OS X v10.10.3 and Server v4.1. Tried to enable the "adaptive firewall" by following the steps in Apple's article (see above) and encountered the error after the second line of commands
Charlie$ sudo pfctl -f /etc/pf.conf
pfctl: Use of -f option, could result in flushing of rules
present in the main ruleset added by the system at startup.
See /etc/pf.conf for further details.
No ALTQ support in kernel
ALTQ related functions disabled
server:~ Charlie$

I'm not sure that is an error, it is a warning.
The Mac kernel is not compiled with support for ALTQ so you can't use those features.
Carry on & test your firewall is working as you expect.

Enable wireless adapter

Enable wireless adapter in windows 7 on MacBook Pro.

to get the apple hardware correctly you have to install apples drivers otherwise the hardware will not function
Apple - Support - Downloads
get the latests bootcamp driver zip which list your mac as supported and install the driver under windows

To enable Axis adapter framework

Hi All ,
We are going to use Axis adapter framework in AAR PI landscape(X6* track). As we understood, this is SAP provided by default with PI but there are some more additional JARs need to be installed to enable this functionality.
Do we need downtime for this activity?
avindar,a

Hi Rainder
Could you refer the SAP Note 1039369 - FAQ XI Axis Adapter for your request. and also you can search SCN or Google about your requirement you can find some many threads
Regards
Sriram

Vista, Cisco VPN Client 5.0.01.0600 "Failed to enable Virtual Adapter"

Four times out of five when trying to connect with the VPN client on Vista Business I get a message that the Virtual adapter cannot be enabled.
When checking the logs there are two entries that always is seen together with this failure:
123 09:21:36.026 12/27/07 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: unable CreateUnicastIpAddressEntry, error 0
129 09:21:55.709 12/27/07 Sev=Warning/3 CVPND/0xA340001A
Failed to find VA MAC Address
Anyone else who have seen this issue on Vista?

Hi Magnus
Uninstall VPN client. Restart the PC
Donwload and run the following software, then restart the PC
http://www.softpedia.com/get/Tweak/Network-Tweak/WinSockFix.shtml
Reinstall VPN client
Regards

Reason 442: Failed to enable Virtual Adapter

I've installed version 4.8.02.0010 of the VPN client onto a Dell Latitude D820 laptop. When I attempt to connect, I get this message. There are no firewalls running (I disabled the Windows XP firewall) and I'm running under Service Pack 2 with all of the latest security patches from Microsoft.
I even tried un-installing the client and using an older version (4.8.00.0440) and it reports a similar error in the Log file.
I'd prefer to NOT have to wipe the laptop and reinstall the O/S if I don't have to. This is the only laptop that I've experienced this problem with but it's also the first Dell Latitude D820 that I've attempted to install the client on.
Is there a problem with the Dell Latitudes and the VPN Client? Is there another way around this other than a wipe and re-install?
I've already tried replacing the profiles and still get the same problem.

Hi,
There is another thing that you can try temporarily.
Goto device manager on the computer and manually enable the virtual adapter and see if it works.
There might be some other adapters / softwares installed that you might have uninstall. Those could be some wireless adapters, personal firewall or internet security package, any other kind of adapter that you installed after installing the VPN cliemt.
HTH,
Kamal

NF750-G55 - BSOD from any enabled network adapter

Hello MSI community,
I am posting this from my phone as my system is BSOD if I enable my network adapter...
I've done multiple troubleshooting restarts disabling and enabling differant components and from I can discern it's the network adapter(s) causing it...
I'm using the built in NVIDIA nForce 10/100/1000 Mbps Ethernet device. I've updated all system drivers (as far as I can tell) from the Nvidia site. But if this device is enabled I'd get BSOD every 5 mins or so..
I disabled the NForce adapter and tried using a Belkin N Wireless device... But I'm also getting BSOD when that is enabled (which is using a completely different driver).
Has anybody heard of this problem? I'd be happy to upload more system info if needed, as long as my system stays stable long enough to transfer the info. >.<
Info I can provide:
BlueScreenView shows the crash as a UNEXPECTED KERNEL MODE TRAP in address ntosknl.exe+70740
this happens every 5 mins almost exactly.
Mobo: nf750-g55
CPU: AMD Phenom II x4
Memory: 4096mb Corsair DDR3 1333Mhz

The new installation that you did with the new motherboard seems to have a problem.
When you then install the motherboard drivers, try SafeMode.
Have a look in Windows' logs, under Admin..., for errors.
Please mention PSU and Windows version in the list of specs.

Enabling PeopleSoft Adapter via sacmd getting error

This is really a BIG issue for us right now, and I already have an open case for it, just wondering if anyone has ever gotten this error using sacmd to enable a PeopleSoft Adapter:
TES SA Command Console (Version 6.1.0.267).
SACmd>agent -C MODIFY -n HRDEV-PSUNX -e Y
TES_003008:The specified port [null:null] is already in use. Completed at 09/01/2013 11:46 PM
I get this errors as well even then I run the command outside of Tidal directly in the Unix prompt.
The disable seem to work well enough. I use the persist parm.

Cisco has fixed this issue on hotfix 353 and we confirmed that it works now. Apparently the port already in use was something they were making a hard error when it was an acceptable condition.

Which driver will enable wireless adapter on my notebook

I recently purchased hp 15 notebook r204tu I am confused about which driver should I use for wireless internet access .When you go on hp website for drivers they have given 7 drivers I donot know which one would work please can any provide link to the driver or name the manufacturer of the wireless adapter I m using windows 7 64 bit sp1
This question was solved.
View Solution.

HP uses various brands of wireless adapters in their laptops.Your driver page has Broadcom & Qualcomm Atheros drivers so it is likely you have one or the other. You can try both- or get the hardware id of the wireless adapter. From Device Manager, right click the adapter, choose Properties. In the window that opens click the Details tab. Use the dropdown selector to choose Hardware ID. Use the top line that appears and do a search for that string to find the device name. Or you can post it here.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Dynamic URL for Recv HTTP (Adapter spec attribute enabled)

Hi,
I need to have a dynamic URL for one of my cases been worked. the URL is
httlp://:<host>/perform/XTA?serv=*&action=start
the event "action" can accept either start/stop or restart. i wanna to control this dynamically and went for recv http enabled with adapter specific message attributes. here i had enabled the check box "URL" and in parameter 1 i had given the name as "action".
in my message payload the "action" will be start/stop or restart which is handled by UDF for which the code is below:l
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey trig = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/HTTP", "UrlParamOne");
conf.put(trig,action);
return "";
this udf is mapped to the root node of the target...but when execute the case i get the following error
"Dynamic Header - Missing Message Attributes: URL/HTTP Destination"
when i execute the url
httlp://:<host>/perform/XTA?serv=*&action=start
in browser it works fine and also with fully qualified name in http recv works fine but not with dynamic settings.
any help on it pls?

Hi Prabhu,
Enable Adapter-Specific Message Attributes(ASMA) in receiver HTTP channel.
Dont enable checkboxes for "URL or HTTP Destination".
Enable checkbox "Apply URL Parameters"
for parameter1 textbox give value action
Regards,
Praveen Gujjeti

Enabling SSL on MQ Adapter does not work

Hi All,
I have a MQ Adapter that enqueues the message properly in the MQ without SSL. Now MQ is SSL enabled and I have got a .DER certificate with me which I presume is the Public Key of the MQ Server.
Now I have to use SSL-enabled MQSeries Adapter. The User's Guide for Technology Adapters says to set certain SSL related properties. I don't know how to get the values of these properties. So I have tried doing this.
1.) I imported the Public Key certificate (.DER file) into default weblogic keystores DemoIdentity.jks and DemoTrust.jks. (I did not create my own keystores, didn't use key password)
2.) I also imported it into the Java keystore cacerts file. (I did not send any certificates to Certification Authority)
3.) I modified the JNDI and set the SSL related properties (as given in the guide) for JNDI in Weblogic.
4.) Then I just test run my TestMQConnectivity composite and I get the following error.
Caused by: BINDING.JCA-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
at oracle.tip.adapter.mq.ManagedConnectionImpl.setupSSLSocketFactory(ManagedConnectionImpl.java:684)
at oracle.tip.adapter.mq.ManagedConnectionImpl.createPhysicalConnection(ManagedConnectionImpl.java:578)
I don't know where I should be looking for the cause of the error : JNDI, SSL config, Keystores.
Please can anyone tell me the steps I need to follow to use the SSL enabled MQ Adapter? The documentation for this is not much explanatory.
Regards,
Neeraj Sehgal

Hi Neeraj,
Please check the following BUG 8430239.
This should help you.
Regards,
Kal

Re-enable Nteowk Adapter

Similar Messages

Maybe you are looking for