Re-enable video for audio only clips in sequence

Hi all,
I've been an editor for quite sometime now, but I'm new to Premiere Pro CS5.
I have a dozen or so clips in my sequence that I used only the audio from a video/audio source file.
I now want to re-enable the video for these clips.
If I double click on them in the sequence it only opens up the audio element in the source window and I cannot re-enable the video to pull it down onto the sequence.
How can I bring the video back without having to go back to the original clip in the bin and re-marking the in and out points and overlaying it?
Many thanks in advance

Make sure the track that contains the clip you want is targetted; that means clicking the Audio buttons in the track headers. Park the CTI at the beginning of the clip you want, and hit the "M" key; this will match frame the original clip and load it into the Source Monitor. From there, you can add/refine your in and out points, and then drag or insert the video into the sequence. Finally, you can relink the video and the audio; be sure to unlink the audio tracks first, then select the audio and video and relink. That will keep the video and audio as a single element.

Similar Messages

  • Adobe Premiere Elements 13, will not display video picture, audio only. My video format is listed as compatible with Adobe.

    Adobe Premiere Elements 13, will not display video picture, audio only. My videois listed as compatible with Adobe.

    douglass
    On what computer operating system is your Premiere Elements 13 running? Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates?
    If not, please do so.
    You have not given us enough information with which to help you.
    What are the properties of your source file that is presenting in the project with audio but no video?
    Quickest way to gain that information is from brand/model/settings of the camera that recorded the video.
    I am looking for
    video compression
    audio compression
    frame size
    frame rate
    interlaced or progressive
    file extension
    pixel aspect ratio
    What does the file's thumbnail look like in Project Assets after it is imported....thumbnail with no image (gray), thumbnail with only an audio icon
    within it, or other? On the Timeline, what do you see represented in Video 1....nothing as opposed to Audio 1 where you see the audio portion of
    the file?
    Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1? Are you running the programs as
    administrator?
    Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
    Let us start here. Based on your reply details, we will customize troubleshooting strategy for you.
    Thanks.
    ATR

  • MDP for audio only (on iMac mid2010)

    Hi
    I wanna buy a iMac 27": 2,8GHz (so it's mid 2010).
    The information i already gathered:
    Audio through HDMI is possible (at least with the proper Adapter).
    The issues with 10.6.4 are solved by 10.6.5.
    TOSLink has a limited bandwidth and doesn't work for HD-Audio-Codecs (and i don't want to make compromises).
    Here's the thing:
    I don't want to connect an external monitor, but i want to send audio through HDMI. If i connect the iMac through HDMI to my AV-Receiver (Denon AVR 1911) will the audio work, even though i don't use the output of my AV-Receiver to connect a TV/Monitor? Or wouldn't the AV-Receiver be recognized by the iMac?
    And if it does work:
    Do i lose performance because the iMac would export audio and video? Or is it possible to disable video export and use the MDP for audio only?
    I hope i explained my problems understandable. (Also hope my english is understandable, too. )
    Hope someone can help,
    Thanks in advance!
    PS: Yes, i know it's not possible to play Blu-Rays on Mac, but I would appreciate
    to be able to stream 5.1 PCM to my AV-Receiver.

    Thanks RRFS, just a couple of questions for you : Do you (or would you) keep things like sample libraries for Kontakt, Logic (apple loops) and sound design library stuff (80 GBs +) on your internal SSD drive?  Also, is your internal SSD your principal (or only internal) drive ?  I have an iMac that already has a serial ATA as its principal drive, but the store I spoke with said they could add a second internal drive (SSD) to my system if I want to take out my optical drive.  Not sure if it would be worth the cash--probably $250 + for parts and labour for 128 GBs that won't make a huge difference to workflow speed, according to BDAqua.
    Cheers & thanks.

  • How do I speed up an audio only clip in iMovie?

    How do I speed up an audio only clip in iMovie?  I've added a song to a video clip and I'd like to speed up the song.  I already sped up the video clip.

    iM08 didn't have that feature.
    • purchase iM09 (Disks) or iM11 (only avail via  download/AppStore, you'd need MacOS10.6 doing so)
    • or use a  free 3rd party tool, workflow described on my website:
    https://sites.google.com/site/karstenschluter/slowmowithim08

  • Can't enable recording for Audio tracks with H2 Zoom

    I'm running Logic Express 7 on a Macbook Pro Intel.
    I used to record vocals with the H2 Zoom as an external mic. But since I ran an update on Logic, I can no longer enable recording for Audio tracks for recording as soon as I connect the H2.
    Interestingly, it let's me only choose an H2 output driver.
    Connecting the same device to Garageband I can choose both, H2 output driver and H2 input driver.
    Anyone else facing this problem? Advice is greatly appreciated.

    You have to set it up using the aggregate device editor (utilities folder). In the utilities folder open AUDIO MIDI setup. From the menu select Audio>Open Aggregate device editor. Add a new aggregate device and name it zoom. Selelct H2 auidio in and H2 Audio out. Check the clock next to H2 Audio out only. Make the Zoom aggregate device you just created your default input in the systems setting area of the audio midi setup form. Close Audio Midi Setup and return to Logic. You may need to restart logic. You should now see "Zoom" in Preferences>Audio> Core audio> Device and you should be able to record using the H2.
    Hope this helps

  • HDMI to RCA converter for Audio only

    I purchased an Apple TV for the airplay for audio only and adding an HDMI to RCA converter (universal unit from Amazon).  Is there any specifications I need to look for on the converter for this to work?  I am aware of issues when using the video portion of a converter, but I don't see anything for the audio.

    maybe easier to find a optical -> RCA converter as the optical is audio only
    though heard some people repport that if hdmi is not connected optical is muted but don't know for sure
    if I may ask then why on eath get an appletv for audio only
    an airport express would do the same thing and a minijack already and is cheaper
    http://store.apple.com/us/product/MC414LL/A/airport-express-base-station?fnode=4 d

  • Final Cut Pro X 10.0.5 Create Storyline with Audio-Only Clips in order to add crossfade transition.

    Final Cut Pro X version 10.0.5 – How to Create Storyline with audio-only clips. I'm following exercises in Diana Weynand's Pro Training Series, and this function is greyed out. Trying to create crossfade transition. New Compound Clip can be activated however.

    Chapter 7. Page 269. Exploring Audio Transitions. Selecting two audio clips, then control-clicking the clips. The dropdown menu to Create Storyline or (Command G) is greyed out. The function no longer seems to be available. I've found other functions that no longer apply with the latest version in relation to the book, and I assume that this is another one. But I'm trying to follow the book the best I can. I know there's a workaround. I can simply select an edit point and add the cross dissolve (Command T), but I wonder if this accomplishes the requested exercise from the book.

  • Shortcut to toggle enable video and audio

    does anyone know the shortcut to toggle with the enable video and audio tracks tx

    just reinstalling the applications will not sort out the problem
    you should do a clean install which is reformatting the hard drive a new install of the OS then install the applications
    insert the MAc OS disc and choose options

  • My connected audio only clips moved from below to above the timeline. What happened? How do I get them below the timeline again?

    My connected audio only clips moved from below to above the timeline. What happened? And how do I get them below the timeline again?

    Repeatedly crashes. What I ended up doing was using a backup Final Cut Projects file and jettisoning this one with the glitch. Luckily, nada much lost. I've had a couple of these weird glitches happen in the Timeline, esp. when dealing with compound audio-only clips & some fx's and rather than spending mega time trying to fix the problem, I bail and start again, and try to be more methodical in my approach.

  • Align a video only clip to an audio only clip

    I recorded a wedding with my good camera and also with another OK camera.  The external mic on the good camera failed so the good video has no audio.
    The other camera has audio and the video is OK (good enough to use for other angles, etc.)
    I've seen articles on how to synchronize two clips automatically, but I think it requires both to have audio...that's how it synchronizes them.
    I can break apart the audio and add it below the video only clip, but I can't figure out how to line it up so it doesn't look like a bad lip-sync foreign film.
    I'm thinking I could align both clips with a marker on the photographer's flash...maybe that will work.
    Can anyone suggest how to do this?
    Thanks in advance
    iMac (Mid 2009) 8GB RAM 8TB Storage (G-Drive), OSX 10.9.3, Final Cut Pro X 10.1.2

    Find a well defined peak in the audio (hand clap, sharp noise, etc.) if you can. Select the detached audio, place the playhead over that peak and type M to set a marker. Find the corresponding point in the video — select that clip, place the playhead over the frame where that sound should start and type M to set another marker. Turn snapping in (or hold down the N key and slide the audio until the markers snap together.  If you missed, you can right click on one or the other marker and select Edit Marker, then nudge  left by typing Control - , (comma) or nudge it right by Control - . (period) then snap to the new position.  If you need to align an audio subframe to a discreet video frame, you can nudge audio by subframes left or right with Option -comma or -period. There are 80 audio subframes per video frame, so holding down the shift key as well will advance the audio by 10 frames at a time.
    It just takes a little patience, but it's not all that difficult to do.

  • No video (black), audio only, from imported .mov files

    Bear with me while I explain the whole process to get where I am, which is that in FCE, I am importing .mov files and they are completely black, no video, just audio.  When I bring a clip into the timeline and try to render even a small clip, it is still black.
    I'm not well-versed in video so please bear with me:
    Steps:
    1.  I received large video files from a videographer
    2.  the large files could not be imported or played in FCE
    3.  downloaded HandBrake converter and began converting files.  Kept them at the same size, but they were then renamed .mov files.
    4.  When I open them in QuickTime, they are black - no video.  But when I see them on the drive and press spacebar in 'finder' to play them, I can see the video.
    5.  When I import them into FCE they are black - no video - just audio.
    FCE is currently set (in Easy Setup) to:  AVCHD-Apple Intermediate Codec 1920-1080i60
    Any help would be greatly appreciated.  I tried converting one file to mp4 and it works fine in FCE, but this takes a long, long time to convert.
    thanks
    There is a 2nd issue that may relate to this:  I am trying to import JVC .m4v files and I am getting "File error 1 file(s) recognized, 0 access denied, 1 unkown".  These files CAN be opened in Quicktime.
    FCE HD 4.0.1
    Mac OS 10.6.8

    I'm having similar, but slightlly different issues.
    I have been using FCE 4 on Mac OSX 10.7.5 with Quicktime 10.1 (501.29).
    I convert my footage in Mpeg Streamclip (GREAT free program) and set the files to the Apple Intermediate Codec.  This makes them work really well in my timeline and I don't have rendering issues or problems.
    So, my problem comes when I File/Export/Quictime Movie.
    The original file plays fine, but they're 2-3 gbs each, so I put them into Quicktime to convert them to a webfriendly size, but every single time they come out as an audio only file.  GRRRR!
    Any help would be greatly appreciated.  Maybe I'm missing something stupid.
    Thanks so much for your help.
    Sincerely,
    Steve

  • Why does my iPad 2 think my iTunes U videos are audio-only?

    I downloaded some iTunes U videos via iTunes 10.5.2 and they play fine (as videos with full audio) in iTunes 10.5.2 on my MacOS 10.5.8 dual G5 PowerMac.  However, when I sync up my iPad2 running iOS 5.0.1 via USB cable with the above iTunes 10.5.2 containing the above iTunes U videos, the iPad2 somehow thinks they are just audio-only files and they show up in the Music app (double tapping them in the Music app just plays the audio part of the file without any video) instead of the Videos app (which I would expect to find them).  After all, when I sync up non-iTunes U movies to my iPad 2, it recognizes them as regular videos and they show up and play fine in the Videos app.  And since I can watch the videos on my PowerMac desktop, it's obvious that the video hasn't been somehow stripped out.  Is there a setting I can batch-set on all these iTunes U files in iTunes that will allow the iPad 2 to recognize them as videos instead of only audio?

    If you have the WiFi-only iPad (which does not have GPS) your location is determined by the mapped location of nearby WiFi routers.
    Without GPS location-finding is done by using a Apple location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured.
    The Apple database is built and updated by Apple GPS-enabled devices (primarily iPhones) actually seeing routers and then adding/updating the router's locations into the database.
    Note to be used for location determination, a device does not need to be actually connected to a router, it just has to see the router. More precise location determination can be done if several nearby routers can be seen. When a router is moved from one location to another erroneous locations can sometimes be reported until the router's location is corrected in Apple's database. This may be the source of your problem.

  • Convert video to audio only

    I'm looking to play video podcasts (classroom lectures) on my Nano6g - even as audio only.
    My university classes (U. Florida) come as a podcast which Itunes puts in the Movies folder rather than the Podcast or ItunesU folder, perhaps because of the file format. I've tried to copy the files into other folders but that doesn't work.
    Is there a way in Itunes 10 to convert these to audio only tracks?
    It really ***** that my 5g had this functionality but now I have to carry my Classic and my Nano 6G to do what the 5G could.

    Not in iTunes, ditto for QuickTime.
    but I bet a google search would point you to some applications that can do it.
    And you might check, some podcasts have both versions: video and audio.

  • Http dynamic streaming for audio only ( radio channeles content)

    fms HDS audio only streaming (no video input) only audio in fms

    Hi,
    Thanks for using the HTTP Dynamic Streaming.
    As you mentioned, you are hitting the missing crossdomain.xml error itself (the error code 2048 confirms this). Attached is a sample all-allowing (and hence risky for non-testing purposes) crossdomain.xml that you can use.
    Thank you !

  • Can I change my podcast from "video" to "audio only"?

    I submitted my podcast and never got an email, but it must have gotten accepted because I can find it when I search for it: http://itunes.apple.com/us/podcast/soul-deep-radio/id493618518
    Now that I am "in" what can I do to change my podcast from video to audio?  I have 3 files in my feed that are marked as video but are actually audio files.  Because of that my feed has a black background and I would rather audio feed for cosmetic reasons, and because I don't want to mislead people into thinking that there are going to be videos when there won't be. 
    Also,  I wanted to change my feed to a feedburner version of the same one, but I was going to wait until I heard that my podcast was officially approved before doing so.
    Thanks

    For reference, your feed is at
    http://www.souldeepradio.net/feed/podcast/
    Three of your episodes are .mp4 - the 'enclosure' tag looks like this:
    <enclosure url="http://www.souldeepradio.net/Mixes/thebooksof_.m4a.mp4" length="152342025" type="video/mp4" />
    You will note that not only is the file a video formate (even though in fact it may only carry audio) and the 'type' is video. This is why your podcast has the black background: you should replace these three episodes with .mp3 versions and amend the feed accordingly - try not to change the 'guid' tags or existing subscribers will find themselves downloading the new version.
    The method for moving iTunes to a different podcast feed URL is detailed here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

Maybe you are looking for

  • I can not create a new user account on eprint

    i can not create a new user account on eprint. I have been trying for over an hour and it repeats telling me that my email addresses are not entered correctly, however they match. ? 

  • Why can't I access a large portion of my HD?

    Hi I have a Macbook with 320GB HD, which I previously stopped using and passed over to my wife. When doing that, I created a new user for her and deleted my old user and the associated folders and files. This was a few months ago. Lately I noticed my

  • Formatting an external drive after use on NSLU2

    I have a Western Digital 1TB My Book that I am trying to reclaim for use on another windows system. When I plug it into a Windows 7 system it fails to find the HID driver - but I think this could get fixed by downloading the right driver.  Seems to w

  • Passing video through the mini (HTPC)

    I currently send video out to my television via HDMI from a receiver. I would like to instead input this video signal to a mac mini and output from the mini to the television (i.e. pass the video signal through the mini on the way to the television).

  • Cannot Check Out files in DreamWeaver 5.5

    I have several websites hosted by the same company. Now when I use DreamWeaver 5.5 to visit these sites, I can see the files on the server and I can see my local files. But when viewing local files, I need to be able to Check Out files, edit them, sa