Re-enable warning
Hey,
I sometimes get the "Your startup disk is almost full"-warning (because I thought 40GB was enough when I bought my iBook - silly me :P).
Anyway, I accidentially checked the box "Never warn me again" (or something like that), but it was a mistake, as I actually liked getting the reminder.
Now, the problem is I don't know how to re-enable that warning. Can someone tell me how to do that
Thanks!!
Don:
A too full HDD is a serious threat to the security of your data, and should not be taken lightly. A too full disk can lead to directory corruption, consequent data loss, and, if left untreated, a Hard Disk Drive crash.
Go to Apple Menu > About this Mac > More Info > Hardware > ATA. Copy the part relating to your HDD in the lower section of the right pane and paste into your response. Mine looks like this:
TOSHIBA MK1032GAX:
Capacity: 93.16 GB
Model: TOSHIBA MK1032GAX
Revision: AB211A
Serial Number: 65KE2771T
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 93.03 GB
Available: 21.57 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s10
Mount Point: /
In addition to freeing up space, as ali brown recommended with the assistance of the link to Dr. Smoke's FAQ, and ali's good advice to backup your data, you should seriously consider getting a larger HDD, as freeing up a few GBs is a temporary measure, at best.
Please do post back with further questions, comments or update on your situation.
Good luck.
cornelius
Similar Messages
-
I recently installed Firefox 4.0 and in the options, under the section "Tabs", I have enabled "Warn me when closing multiple tabs". But if I have multiple tabs opened with websites loaded in them, and then try to close the browser, it simply closes. No warnings are shown (which was there in previous versions). Couple of times I clicked on the close button of browser and then realized that I had some important sites opened in different tabs, which I lost as it didn't warn me. Can you please let me know whether this is a bug or a mistake from my side?
I'm sure you are using Private Browsing mode in Firefox 4. I have also the same problem and I tried to uncheck this option after many times accessing about:config\browser.warnOnquit. And it's wonderful, the warning cameback. I think it's a bug about Private Browsing mode. Hope Mozilla's Developers will fix it.
-
Enabling Warning for Application that is not compatible with Ipod Touch
Sorry if this has been asked before. Searching for prior posts about it, I ended up with pages of Compatibility Mode Posts.
Not thinking, when iTunes asked me if I wanted to disable the warning when an application was not compatible with my Ipod Touch, I said Yes. Searching through all the settings,Preferences and properties (or even in Regedit), I see no way to re-enable this option. Kinda nice to have the warning so I know it did not install, and would like to get it back. About the only thing I saw remotely close was the option to "Reset all dialog warnings" in the preferences menu, and it didn't work.
Any thoughts???Rebuilding your iTunes preferences files might get that back for you, Pa.
The technique you need for that is described in the "Remove iTunes Preference files" section of the "User-specific troubleshooting" section of the following document:
[iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1717]
Before starting out on that, set the PC up to view hidden files and folders, as per the description at the beginning of the "User-specific troubleshooting" section.
*Some heads-ups before proceeding*
Be careful of any custom preferences (EQ, imports, etc) you have set up. Take a note of those, because rebuilding the relevant prefs returns all such prefs to their default settings. You may need to set up any such preferences all over again.
You may also need to reinstall any third-party plugins afterwards.
Things to expect during the pref file rebuild ... moving one set to the desktop (on XP) causes the setup assistant to run during the rebuild. Avoid saying yes if it asks you to import all the media files on your PC into iTunes. Otherwise, you'll end up duplicating all your content in your iTunes library. Moving the other set of prefs to the desktop (on XP) means that you have to agree to the licence agreement again.
Message was edited by: b noir -
How do i enable warning in fox 5
tools...security...please check warning...it 's no longer available
The settings for the warning messages have been removed from the user interface (Bug 513166).
You need to change the related security.warn_* prefs directly on the <b>about:config</b> page.<br />
Filter: security.warn
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
You can use the Filter bar at to top of the about:config page to locate a pref more easily. -
Up until a few weeks ago--I think when I updated to Firefox 23, though it may have been 22--if I enabled "Warn me when closing multiple tabs," the warning would display only if I closed out a window using the X in the upper right-hand corner, but not if I closed the browser down correctly from the menu. Now it's warning me when I use the menu, too. Is there a way to revert this behavior? I only need the warning if I accidentally hit the x for the entire window instead of for a single tab.
You can consider to use this startup setting:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time" -
ECC 6.0 EHP4 upgrade to EHP5 fails in MAIN_NEWBAS/XPRAS_AIMMRG
from SAPehpi.log
CURRENTPHASE MAIN_NEWBAS/XPRAS_AIMMRG
...started at 20110825140601
...begin processing at 20110825140601
..times self: 0.080000/0.150000 usr/sys, children 0.560000/0.450000 usr/sys.
..finished at 20110825140820 with status UNRESOLVED REQUESTS IN BUFFER.
Error message set: 'Unresolved requests in buffer UT1
Check logfiles 'XPRASUPG.ELG' and '/usr/sap/putUT1/EHPI/abap/log/SAPehpi.ECO''
...begin dialogue at 20110825140821
from SAPehpi.ECO
EXECUTING /usr/sap/UT1/SYS/exe/run/tp (/usr/sap/UT1/SYS/exe/run/tp) pf=/usr/sap/putUT1/EHPI/abap/bin/XPRASUPG.TPP put
UT1
This is /usr/sap/UT1/SYS/exe/run/tp version 380.03.36 (release 720, unicode enabled)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 12
meaning:
A tool used by tp aborted
Process with ID 4903 terminated with status 12
from XPRASUPG.ELG
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR702XPRA00000005.UT1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1AETR012XProgram terminated (job: "RDDEXECL", no.: "14071100")
Long text:
Cause
Program "&V#&", which was started in the background, was terminated
abnormally.
System Response
The system created a job log for the terminated program.
What to do
Proceed as follows:
Log onto the system in which the program was executed. The system is
specified at the beginning of the transport log.
Then call transaction SM37 to display the job log.
Enter "&V#&" as job name and "DDIC" as user name.
Restrict the starting date to the starting date specified in the
transport log.
For the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>.
A list of the jobs satisfying the selection criteria is displayed.
You can display the log by pressing <LS>Job log</>.
If the list contains several jobs, you can select the job with the ID "
&V#&" with <LS>Display</> -> <LS>Job details</> or define further
details for the selection criteria in the initial screen of transaction
SM37.
If the ABAP processor reports cancellation, double-clicking on the
corresponding message in the job log branches to the display of the
corresponding short dump.
1AEPU320 See job log"RDDEXECL""14071100""UT1"
1 ETP111 exit code : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
<end of logs>
I have searched for ST22 logs and i got a syntax error on program CL_PROXY_STYLESHEET_RUNTIME.
Upgrade 702 has added a segment in the DELETE_CLASS of the program above:
delete from sproxxsl
where class = class and method = <sproxxsl>-method and client = <sproxxsl>-client.
before:
delete from sproxxsl
where class = class and method.
"client" field is not part of table SPROXXSL. Which is causing the error.
Any idea on how to continue???
The choices now are:
01) * Repeat phase MAIN_NEWBAS/XPRAS_AIMMRG to continue at the point it stopped
02) - Initialize phase MAIN_NEWBAS/XPRAS_AIMMRG to restart it from the beginning
03) - Accept non-severe errors and repeat phase MAIN_NEWBAS/XPRAS_AIMMRG
04) - Exit this program
Edited by: Rainier Sison on Aug 29, 2011 2:21 PM
Edited by: Rainier Sison on Aug 29, 2011 2:22 PM
Edited by: Rainier Sison on Aug 29, 2011 2:23 PMWell, I did have a similar issue with RDDEXECL during the import of SAPKB71007.
The solution at that time was updating the kernel to the latest support level, that was released a few weeks after the error with a special modification to fix 'our' issue.
Do you think it's possible to change the kernel on the shadow instance at this moment of EHPI execution?
Hope this helps
Best Regards
Francisco
Edit: The OSS note was: 1551400 - ABAP: Session abort when compiling a deep constant
Edited by: Francisco José Martínez Carretero on Aug 29, 2011 4:54 PM -
[SOLVED] how to prevent suspending/sleeping when closing laptop lid
Hi all,
My laptop, a Lenovo Thinkpad T430u, suspends whenever I close the lid. It's been doing this since I first installed Arch. I want to turn this feature off. How can I do it?
Relevant information:
acpid is installed
the configuration file /etc/acpi/handler.sh
#!/bin/bash
# Default acpi script that takes an entry for all actions
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger 'PowerButton pressed'
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
logger 'SleepButton pressed'
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
logger 'AC unpluged'
00000001)
logger 'AC pluged'
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
00000001)
logger 'Battery offline'
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
open)
logger 'LID opened'
logger "ACPI action undefined: $3"
esac
case $(cat /proc/acpi/button/lid/LID0/state | awk '{print $2}') in
closed) XAUTHORITY=$(ps -C xinit -f --no-header | sed -n 's/.*-auth //; s/ -[^ ].*//; p') xset -display :0 dpms force off ;;
open) XAUTHORITY=$(ps -C xinit -f --no-header | sed -n 's/.*-auth //; s/ -[^ ].*//; p') xset -display :0 dpms force on ;;
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:
dmesg output:
[ 1530.790532] PM: Syncing filesystems ... done.
[ 1530.805678] PM: Preparing system for mem sleep
[ 1530.844445] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1530.856658] Freezing remaining freezable tasks ... (elapsed 0.10 seconds) done.
[ 1530.963435] PM: Entering mem sleep
[ 1530.963572] Suspending console(s) (use no_console_suspend to debug)
[ 1531.123543] iwlwifi 0000:03:00.0: iwl_pcie_cmdq_reclaim: Read index for DMA queue txq id (9), index 207 is out of range [0-256] 208 208.
[ 1531.124216] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1531.124579] sd 0:0:0:0: [sda] Stopping disk
[ 1531.360682] mei 0000:00:16.0: suspend
[ 1531.440517] ahci 0000:00:1f.2: power state changed by ACPI to D3hot
[ 1531.687309] PM: suspend of devices complete after 722.490 msecs
[ 1531.687784] PM: late suspend of devices complete after 0.469 msecs
[ 1531.688232] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[ 1531.714222] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1531.727619] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1531.754015] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1531.767422] PM: noirq suspend of devices complete after 79.565 msecs
[ 1531.768301] ACPI: Preparing to enter system sleep state S3
[ 1531.797647] PM: Saving platform NVS memory
[ 1531.799282] Disabling non-boot CPUs ...
[ 1531.900721] smpboot: CPU 1 is now offline
[ 1532.004162] smpboot: CPU 2 is now offline
[ 1532.107554] smpboot: CPU 3 is now offline
I have pmutils and tlpinstalled
tlp config
# tlp - Parameters for power save
# Hint: some features are disabled by default, remove the leading # to enable them
# Set to 0 to disable/1 to enable TLP
TLP_ENABLE=1
# Seconds laptop mode has to to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
# Select a cpu frequency scaling governor: ondemand/powersave/performance/conservative
# Important:
# - You *must* disable your distribution's governor settings or conflicts will occur
# - ondemand is sufficient for *almost all* workloads, you should know what you're doing!
#CPU_SCALING_GOVERNOR_ON_AC=ondemand
#CPU_SCALING_GOVERNOR_ON_BAT=ondemand
# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your cpu. For available frequencies see
# tlp-stat output, Section "+++ Processor".
# Hint: Parameters are disabled by default, remove the leading # to enable them,
# otherwise kernel default values are used.
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0
# Set the cpu "turbo boost" feature: 0=disable / 1=allow
# Requires an Intel Core i processor and kernel 3.7 or later.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0
# Minimize number of used cpu cores/hyper-threads under light load conditions
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
# Kernel NMI Watchdog
# 0=disable (default, saves power) / 1=enable (for kernel debugging only)
NMI_WATCHDOG=0
# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
# Freq:voltage pairs are written to /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"
# Hard disk devices, separate multiple devices with spaces (default: sda).
# Devices can be specified by disk id too (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"
# Hard disk advanced power management level: 1(max saving)..254(off)
# Levels 1..127 may spin down the disk.
# Separate values for multiple devices with spaces.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
# Hard disk spin down timeout:
# 0: spin down disabled
# 1..240: timeouts from 5s to 20min (in units of 5s)
# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# (see 'man hdparm' for details)
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
# Select io scheduler for the disk devices: noop/deadline/cfq (Default: cfq)
# Separate values for multiple devices with spaces.
#DISK_IOSCHED="cfq cfq"
# SATA aggressive link power management (ALPM):
# min_power/medium_power/max_performance
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
# PCI Express Active State Power Management (PCIe ASPM):
# default/performance/powersave
# Hint: needs kernel boot option pcie_aspm=force on some machines
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
# Radeon graphics clock speed (profile method): low/mid/high/auto/default
# auto = mid on BAT, high on AC; default = use hardware defaults
# (Kernel >= 2.6.35 only, not with fglrx driver!)
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
# WiFi power saving mode: 1=disable/5=enable
# (Linux 2.6.32 and later, some adapters only!)
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
# Disable wake on lan: Y/N
WOL_DISABLE=Y
# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables / >=1 enables power save.
SOUND_POWER_SAVE=1
# Disable controller too (HDA only): Y/N
SOUND_POWER_SAVE_CONTROLLER=Y
# Set to 1 to power off optical drive in UltraBay (ThinkPads only)
# when running on battery. A value of 0 disables this Feature (Default).
# Drive can be powered on again by releasing (and reinserting) the
# eject lever or by pressing the disc eject button on newer models.
# Note: an UltraBay hard disk is never powered off.
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0)
BAY_DEVICE="sr0"
# Runtime Power Management for pci(e) bus devices
# (Kernel >= 2.6.35 only): on=disable/auto=enable
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
# Runtime PM for *all* pci(e) bus devices: 0=disable / 1=enable
# Warning: experimental option, could cause system instabilities
RUNTIME_PM_ALL=0
# Set to 0 to disable/1 to enable usb autosuspend feature
USB_AUTOSUSPEND=1
# Devices from the following list are excluded from usb autosuspend
# (separate with spaces). Use lsusb to get the id's.
# Note: input devices (usbhid) are excluded automatically
#USB_BLACKLIST="1111:2222 3333:4444"
# Set to 1 to disable autosuspend before shutdown/0 to do nothing
# (workaround for usb devices that cause shutdown problems)
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
# Restore radio device state (bluetooth, wifi, wwan) from previous shutdown
# on system startup: 0=disable/1=enable
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
# are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0
# Radio devices to disable on startup: bluetooth wifi wwan
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
# Radio devices to enable on startup: bluetooth wifi wwan
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
# Radio devices to disable on shutdown: bluetooth wifi wwan
# (workaround for devices that are blocking shutdown)
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
# Radio devices to enable on shutdown: bluetooth wifi wwan
# (to prevent other operating systems from missing radios)
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
# Radio devices to enable when wireless radio switch is turned on:
# bluetooth wifi wwan (Ubuntu + ThinkPad only)
#DEVICES_TO_ENABLE_ON_RADIOSW="wifi wwan"
# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module required)
# Charging starts when the remaining capacity falls below the START_CHARGE_TRESH
# value and stops when exceeding the STOP_CHARGE_TRESH value.
# Main battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay or slice battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80
# Set to 1 to disable use of tpacpi-bat on Sandy Bridge or newer Thinkpads
# and force usage of tp-smapi instead
#DISABLE_TPACPIBAT=1
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth/wifi/wwan
# Hint: parameters are disabled by default, remove the leading # to enable them
# Radio devices to disable on connect
DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
# Radio devices to enable on disconnect
DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
# Radio devices to enable/disable when docked
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""
# Radio devices to enable/disable when undocked
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""
thanks guys
I love arch
Last edited by beitme (2013-06-08 10:05:37)@ Karol, done
@ 65kid, here's my logind.conf
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
#HandlePowerKey=poweroff
#HandleSuspendKey=suspend
#HandleHibernateKey=hibernate
#HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min -
Getting error while reset sequence value
i hve created two table. and a sequence for other table. i want to do that when i insert into a first table, entries of other table should be deleted and sequence value should reset to 1. For that i have executed the following sql code
but getting the error:
create or replace Trigger m_sale_ainsert_trig
after insert on m_sale_bill
for each row
begin
DELETE FROM M_TEMP;
<<COLUMN_SEQUENCES>>
BEGIN
Alter Sequence M_TEMP_SEQ Restart with 1;
END COLUMN_SEQUENCES;
end;
Alter Trigger m_sale_ainsert_trig enable;
Warning: execution completed with warning
Trigger m_sale_ainsert_trig Compiled.
Alter Trigger m_sale_ainsert_trig succeeded.
5/4 PLS-00103: Encountered the symbol "ALTER" when expecting one of the following:
( begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
continue close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe purge
pls rectify it!!!!! what are the mistakes in this code?
Edited by: JKMourya on Mar 21, 2013 10:55 AMJKMourya wrote:
i hve created two table. and a sequence for other table. i want to do that when i insert into a first table, entries of other table should be deleted and sequence value should reset to 1. For that i have executed the following sql code
but getting the error:
create or replace Trigger m_sale_ainsert_trig
after insert on m_sale_bill
for each row
begin
DELETE FROM M_TEMP;
<<COLUMN_SEQUENCES>>
BEGIN
Alter Sequence M_TEMP_SEQ Restart with 1;
END COLUMN_SEQUENCES;
end;
Alter Trigger m_sale_ainsert_trig enable;
Warning: execution completed with warning
Trigger m_sale_ainsert_trig Compiled.
Alter Trigger m_sale_ainsert_trig succeeded.
5/4 PLS-00103: Encountered the symbol "ALTER" when expecting one of the following:
( begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
continue close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe purge
pls rectify it!!!!! what are the mistakes in this code?
Edited by: JKMourya on Mar 21, 2013 10:55 AMDDL inside PL/SQL is NOT allowed
you must (ab)use EXECUTE IMMEDIATE -
Hi,
We try to install sccm 2012 serondary site in server 2012. It always failed.
I used the rereqchek tools to check system enviroment locally. All passed.
The primary site installed in server 2012. Both server had granted the administrator permission.
Anyone can help to check the below Configmgrprereq.log
<01-16-2015 08:47:55> ********************************************
<01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
<01-16-2015 08:47:55> ********************************************
<01-16-2015 08:47:55> Commandline :
"D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
<01-16-2015 08:47:55> Check Type: Secondary site
Site Server: DPServer.ms.com,
SQL Server: DPServer.ms.com,
SQL Named Instance: ,
Install Folder: d:\Program Files\Microsoft Configuration Manager\,
Setup Source Folder: D:\SCCM2012\Source
<01-16-2015 08:47:55> INFO: Executing prerequisite functions...
<01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
<01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
<01-16-2015 08:48:08> DPServer.ms.com; Site server computer account administrative rights; Error; Configuration Manager Setup requires that the site server computer has administrative rights on
the SQL Server and management point computers.
<01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
<01-16-2015 08:48:22> DPServer.ms.com; Check Server Service is running; Passed
<01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
<01-16-2015 08:48:30> DPServer.ms.com; Unsupported site server operating system version for Setup; Error; Configuration Manager site systems can only be installed on systems running Windows Server
2008 SP2 or later.
<01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
<01-16-2015 08:48:34> DPServer.ms.com; Domain membership; Error; Configuration Manager site server components must be installed on computers that are members of a Windows domain.
<01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
<01-16-2015 08:48:40> DPServer.ms.com; Free disk space on site server; Passed
<01-16-2015 08:48:47> DPServer.ms.com; Pending system restart; Passed
<01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
<01-16-2015 08:48:50> DPServer.ms.com; Read-Only Domain Controller; Passed
<01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
<01-16-2015 08:48:50> DPServer.ms.com; Site Server FQDN Length; Passed
<01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:48:57> DPServer.ms.com; Microsoft XML Core Services 6.0 (MSXML60); Warning; MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
<01-16-2015 08:49:03> DPServer.ms.com; Microsoft Remote Differential Compression (RDC) library registered; Error; Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
<01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
<01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
<01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
<01-16-2015 08:49:19> DPServer.ms.com; Microsoft Windows Installer; Error; Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
requirement. Configuration Manager requires at least Windows Installer version 4.5.
<01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
<01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
<01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
<01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
<01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
<01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
<01-16-2015 08:49:49> DPServer.ms.com; SQL Server Express on Secondary Site; Error; A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
<01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
<01-16-2015 08:49:55> DPServer.ms.com; Existing Configuration Manager server components on site server; Error; A site server or site system role is already installed on the computer selected for
site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
<01-16-2015 08:49:55> DPServer.ms.com; Firewall exception for SQL Server (stand-alone primary site); Passed
<01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
<01-16-2015 08:49:55> INFO: SQL Server named instance <>
<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
<01-16-2015 08:49:55> DPServer.ms.com; SQL Server service running account; Passed
<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
<01-16-2015 08:49:55> DPServer.ms.com; Dedicated SQL Server instance; Passed
<01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
<01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
<01-16-2015 08:49:55> DPServer.ms.com; Parent/child database collation; Passed
<01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
<01-16-2015 08:50:05> INFO: .NET is installed
<01-16-2015 08:50:05> DPServer.ms.com; Minimum .NET Framework version for Configuration Manager site server; Passed
<01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
<01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
<01-16-2015 08:50:10> INFO: .NET is installed
<01-16-2015 08:50:11> DPServer.ms.com; Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site; Passed
<01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
<01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
<01-16-2015 08:52:29> DPServer.ms.com; Setup Source Version; Error; The product version in the source folder specified for secondary site installation does not match the version of the primary site.
<01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
<01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:52:55> DPServer.ms.com; Setup Source Folder; Error; The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
<01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
<01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
<01-16-2015 08:52:55> DPServer.ms.com; SQL Server on the Secondary Site Computer; Passed
<01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
<01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
<01-16-2015 08:53:04> DPServer.ms.com; Primary FQDN; Passed
<01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
<01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:53:30> DPServer.ms.com; Verify site server permissions to publish to Active Directory.; Warning; The site server might be unable to publish to Active Directory. The computer account
for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
<01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
<01-16-2015 08:53:44> DPServer.ms.com; Remote Connection to WMI on Secondary Site; Passed
<01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
<01-16-2015 08:53:44> INFO: LangID <409>
<01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
<01-16-2015 08:53:44> DPServer.ms.com; Required SQL Server Collation; Passed
<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server sysadmin rights; Passed
<01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server sysadmin rights for reference site; Passed
<01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server security mode; Passed
<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server version; Passed
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server Edition; Passed
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server Tcp Port; Passed
<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
<01-16-2015 08:53:44> DPServer.ms.com; Configuration for SQL Server memory usage; Passed
<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server process memory allocation; Passed
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
<01-16-2015 08:53:44> DPServer.ms.com; Case-insensitive collation on SQL Server; Passed
<01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
<01-16-2015 08:53:44> INFO: getaddrinfo returned success.
<01-16-2015 08:53:44> DPServer.ms.com; Validate FQDN of SQL Server Computer; Passed
<01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:53:44> DPServer.ms.com; Administrative share (Site system); Passed
<01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
<01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
<01-16-2015 08:53:44> DPServer.ms.com; Site System to SQL Server Communication; Passed
<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
<01-16-2015 08:53:52> DPServer.ms.com; Unsupported management point operating system version for Setup; Warning; Configuration Manager site systems can only be installed on systems running Windows
Server 2008 SP2 or later.
<01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
<01-16-2015 08:54:05> DPServer.ms.com; Windows Failover Cluster; Passed
<01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:10> DPServer.ms.com; IIS service running; Warning; Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
requires IIS. Install IIS on the site system to continue setup.
<01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
<01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
<01-16-2015 08:54:39> DPServer.ms.com; BITS installed; Warning; Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
<01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
<01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
<01-16-2015 08:55:08> DPServer.ms.com; BITS enabled; Warning; Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
<01-16-2015 08:55:08> DPServer.ms.com; IIS HTTPS Configuration for management point; Passed
<01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
<01-16-2015 08:55:08> DPServer.ms.com; Firewall exception for SQL Server for management point; Passed
<01-16-2015 08:55:08> DPServer.ms.com; Administrative rights on management point; Passed
<01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
<01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:55:36> DPServer.ms.com; Client Version on Management Point Computer; Warning; You cannot install the management point on a computer with an earlier version of the Configuration Manager
client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
<01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
<01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:55:49> DPServer.ms.com; Unsupported distribution point operating system version for Setup; Warning; Configuration Manager distribution point can only be installed on systems running
Windows Server 2003 or later.
<01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:55:57> DPServer.ms.com; Microsoft XML Core Services 6.0 (MSXML60) for distribution point; Warning; MSXML 6.0 or later libraries are required for Configuration Manager console and
Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
<01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:57> DPServer.ms.com; IIS HTTPS Configuration for distribution point; Passed
<01-16-2015 08:55:57> DPServer.ms.com; Administrative rights on distribution point; Passed
<01-16-2015 08:55:57> ***************************************************
<01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
<01-16-2015 08:55:57> ***************************************************
<01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
<01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
<01-16-2015 08:56:09> INFO: Setting registry values
<01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.<01-16-2015 08:48:08> DPServer.ms.com; Site server computer account administrative rights; Error; Configuration Manager Setup requires that the site server computer has administrative rights
on the SQL Server and management point computers.
Actually the administrative permission had been granted. -
Transport control program tp ended with error code 0232
Dear all
I've change password for user SAPSR3 by mistake
the result from brtools is "password changed successfully in table OPS$CAPADM.SAPUSER for user SAPSR3"
after that i can not transport to my production client
with error : TP_REPORTED_ERROR
Transport control program tp ended with error code 0232
Can anybody help me please
thanks & rgds,
DellaI've changed my SAPSR3 password to sap but still error
this is the error log from Check Transport Tool
DB Connect Link to database failed
This is tp version 372.04.70 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to CAP failed (20091217174435, probably wrong environmen
TRACE-INFO: 1: [dev trc ,00000] Thu Dec 17 17:44:35 2009
0.007435
TRACE-INFO: 2: [dev trc ,00000] DlLoadLib() success: dlopen("/usr
0.007448
TRACE-INFO: 3: [dev trc ,00000] Got
LIBPATH=/usr/sap/CAP/DVEBMGS32/exe:/usr/sap/CAP/DVEBMGS32/exe:/usr/lib
lient from environment
TRACE-INFO: 4:
0.008053
TRACE-INFO: 5: [dev trc ,00000] Oracle Client Version: '10.2.0.2.
0.008140
TRACE-INFO: 6: [dev trc ,00000] >oci_initialize(con_hdl=0, char
0.008158
TRACE-INFO: 7: [dev trc ,00000] application info callback registe
0.008173
TRACE-INFO: 8: [dev trc ,00000] OCIEnvCreate(mode=16384=OCI_UTF16
0.010330
TRACE-INFO: 9: [dev trc ,00000] Client character set UTF16 -> UTF
0.010421
TRACE-INFO: 10: [dev trc ,00000] Client NLS setting (OCINlsGetInf -
When I want to release the chanage request,return code 0232.I reconfigure stms,and the error still exist.
In the case,I check the tracsport tool.find the tp connect to db faild.
eror log：
Test call of transport control program (tp) ended with return code 0232
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK D01K904258 pf=/usr/sap/trans/bin/TP_DOMAIN_D01.PFL -Dtransdir=/usr/sap/tr"
which checks the export requirements, returned the following information:
Return code from tp: 0232
Error text from tp: ERROR: Connect to D01 failed (20100527085439, prob
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed
I check transport tool and the tp conn error，log：
This is tp version 372.04.04 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to D01 failed (20100527082234, probably wrong environmen).
TRACE-INFO: 1: [dev trc ,00000] Thu May 27 08:22:34 2010
TRACE-INFO: 2: [dev trc ,00000] load shared library (/usr/sap/D01/SYS/exe/run/dbora
TRACE-INFO: 3:
TRACE-INFO: 4: [dev trc ,00000] Got
LIBPATH=/usr/sap/D01/DVEBMGS00/exe:/usr/sap/D01/DVEBMGS00/exe:/usr/lib:/usr/sap/D01
lient from environment
TRACE-INFO: 5:
TRACE-INFO: 6: [dev trc ,00000] Oracle Client Version: '10.2.0.2.0'
TRACE-INFO: 7: [dev trc ,00000] >oci_initialize (con_hdl=0)
TRACE-INFO: 8: [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8
TRACE-INFO: 9: [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password
TRACE-INFO: 10: [dev trc ,00000] Connecting as /@D01 on connection 0 (nls_hdl 0) ..
TRACE-INFO: 11:
TRACE-INFO: 12: [dev trc ,00000] Nls CharacterSet NationalCharSet
ErrHpBatch
TRACE-INFO: 13:
TRACE-INFO: 14: [dev trc ,00000] 0 UTF8
0x110e96310
TRACE-INFO: 15:
TRACE-INFO: 16: [dev trc ,00000] Allocating service context handll=0
TRACE-INFO: 14: [dev trc ,00000] 0 UTF8
0x110e96310
TRACE-INFO: 15:
TRACE-INFO: 16: [dev trc ,00000] Allocating service context handle for con_hdl=0
TRACE-INFO: 17: [dev trc ,00000] Allocating server context handle
TRACE-INFO: 18: [dev trc ,00000] Attaching to DB Server D01 (con_hdl=0,svchp=0x110e
TRACE-INFO: 19:
TRACE-INFO: 20: [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed wit
TRACE-INFO: 21:
TRACE-INFO: 22: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
TRACE-INFO: 23: [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541
TRACE-INFO: 24: [dev trc ,00000] Try to connect with default password
TRACE-INFO: 25: [dev trc ,00000] Connecting as SAPSR3/<pwd>@D01 on connection 0 (nl
TRACE-INFO: 26:
TRACE-INFO: 27: [dev trc ,00000] Nls CharacterSet NationalCharSet
ErrHpBatch
TRACE-INFO: 28:
TRACE-INFO: 29: [dev trc ,00000] 0 UTF8
0x110e96310
TRACE-INFO: 30:
TRACE-INFO: 31: [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x110e99e60)
TRACE-INFO: 32: [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x110e99
TRACE-INFO: 33:
TRACE-INFO: 34: [dev trc ,00000] Deallocating server context handle 0x110e99e60
TRACE-INFO: 35: [dev trc ,00000] Allocating server context handle
TRACE-INFO: 36: [dev trc ,00000] Attaching to DB Server D01 (con_hdl=0,svchp=0x110e
TRACE-INFO: 37:
TRACE-INFO: 38: [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed wit
TRACE-INFO: 39:
TRACE-INFO: 40: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
TRACE-INFO: 41: [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541
TRACE-INFO: 42: [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblin
TRACE-INFO: 43:
TRACE-INFO: 44: [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#5 @
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
standard output from tp and from tools called by tp:LOG BY0=>ORA-12541: TNS:no listener [
Is your system up. From the above error it seems that listner is not running. -
Hi,
I am doing an EHP6 upgrade and I am getting an error in the MAIN_SHDRUN/ACT_UPG phase. The error directs me to the SAPup.ECO file. Please find the contents of this file below. Please assist.
FSAPup> Starting subprocess at 20120607070947
ENV: JAVA_HOME=C:\j2sdk1.4.2_17-x64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=F:\oracle\PRD\11202
ENV: ORACLE_SID=PRD
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: SAPDATA_HOME=F:\oracle\PRD
ENV: SAPSYSTEMNAME=PRD
ENV: auth_shadow_upgrade=0
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=PRD
ENV: PATH=C:\Windows\system32
EXECUTING C:\Windows\system32\msiexec.exe (msiexec) /qn /norestart /i E:\usr\sap\PRD\SUM\abap\exe\vcredist_x64.msi
SAPup> Starting subprocess at 20120607070947
ENV: JAVA_HOME=C:\j2sdk1.4.2_17-x64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=F:\oracle\PRD\11202
ENV: ORACLE_SID=PRD
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: SAPDATA_HOME=F:\oracle\PRD
ENV: SAPSYSTEMNAME=PRD
ENV: auth_shadow_upgrade=0
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=PRD
ENV: PATH=C:\Windows\system32
EXECUTING C:\Windows\system32\msiexec.exe (msiexec) /qn /norestart /i E:\usr\sap\PRD\SUM\abap\exenew\vcredist_x64.msi
### Phase PREP_INPUT/DBQUERY_PRE:
### Phase PREP_INPUT/TOOLVERSION_INI:
### Phase PREP_INPUT/CONFCHK_IMP:
### Phase PREP_INPUT/CHKSYSTYPE:
### Phase PREP_INPUT/HIAV_CHK_PRE:
### Phase PREP_INPUT/J2EE_CHK1:
### Phase PREP_INPUT/INSTANCELIST_PRE:
### Phase PREP_INPUT/HIAV_CHK_POST:
### Phase PREP_INPUT/CHECKSYSSTATUS_POST:
### Phase PREP_INPUT/CHECK4SOLMAN:
### Phase PREP_INIT/DBCHK_INI:
### Phase PREP_INIT/SWITCHPARAM_UPGDIR:
### Phase PREP_INIT/REQ_J2EEUPG:
### Phase PREP_INIT/SETSYNC_PREP_STARTED:
### Phase PREP_INIT/VERSCHK_INI:
### Phase PREP_INIT/VALCHK_INI:
### Phase PREP_INIT/LMSEMAPHORE_SET:
### Phase PREP_INIT/EHP_CHK:
### Phase PREP_INIT/UNICODE_CHK_PRE:
### Phase PREP_INIT/TOOLVERSION_UPG1:
### Phase PREP_INIT/DBCONNCHK_INI:
### Phase PREP_INIT/SETSYNC_INFO_FINISHED:
### Phase PREP_INIT/CLNT_CHK_INI:
### Phase PREP_INIT/PATCH_CHK1:
### Phase PREP_INIT/EXECCV:
### Phase PREP_INIT/EXECAV:
### Phase PREP_INIT/EXECEXT:
### Phase PREP_INIT/COMPINFO_INI:
### Phase PREP_INIT/JOB_RSUPDTEC:
### Phase PREP_INIT/GEN_TAIASAP:
### Phase PREP_INIT/INIT_CNTRANS_PRE:
### Phase PREP_INIT/JOB_RSDB4090:
### Phase PREP_INIT/CHK_DB6_REG_PRE:
### Phase PREP_INIT/CHK_DB6_PAR_INI:
### Phase PREP_INIT/SPACECHK_INI:
### Phase PREP_INIT/DBPREP_CHK:
### Phase PREP_INIT/ASU_CHK:
### Phase PREP_INIT/ADDON_INFO:
### Phase PREP_INIT/ADDON_SPEC1:
### Phase PREP_INIT/ADDON_TREAS:
### Phase PREP_INIT/ADDON_WFM:
### Phase PREP_INIT/ADDON_DMC:
### Phase PREP_INIT/ADDON_CMS:
### Phase PREP_INIT/ADDON_FND:
### Phase PREP_INIT/UCMIG_DECISION:
### Phase PREP_INIT/ACE_CHK:
### Phase PREP_INIT/CRM_BILL:
### Phase PREP_INIT/PR_DBPAR:
### Phase PREP_INIT/CHECKPROF_INI:
### Phase PREP_INIT/DB2_CHECKNOTES_INI:
### Phase PREP_INIT/DBCHK_INI:
### Phase PREP_INIT/SWITCHPARAM_UPGDIR:
### Phase PREP_INIT/REQ_J2EEUPG:
### Phase PREP_INIT/SETSYNC_PREP_STARTED:
### Phase PREP_INIT/VERSCHK_INI:
### Phase PREP_INIT/VALCHK_INI:
### Phase PREP_INIT/LMSEMAPHORE_SET:
### Phase PREP_INIT/EHP_CHK:
### Phase PREP_INIT/UNICODE_CHK_PRE:
### Phase PREP_INIT/TOOLVERSION_UPG1:
### Phase PREP_INIT/DBCONNCHK_INI:
### Phase PREP_INIT/SETSYNC_INFO_FINISHED:
### Phase PREP_INIT/CLNT_CHK_INI:
### Phase PREP_INIT/PATCH_CHK1:
### Phase PREP_INIT/EXECCV:
### Phase PREP_INIT/EXECAV:
### Phase PREP_INIT/EXECEXT:
### Phase PREP_INIT/COMPINFO_INI:
### Phase PREP_INIT/JOB_RSUPDTEC:
### Phase PREP_INIT/GEN_TAIASAP:
### Phase PREP_INIT/INIT_CNTRANS_PRE:
### Phase PREP_INIT/JOB_RSDB4090:
### Phase PREP_INIT/CHK_DB6_REG_PRE:
### Phase PREP_INIT/CHK_DB6_PAR_INI:
### Phase PREP_INIT/SPACECHK_INI:
### Phase PREP_INIT/DBPREP_CHK:
### Phase PREP_INIT/ASU_CHK:
### Phase PREP_INIT/ADDON_INFO:
### Phase PREP_INIT/ADDON_SPEC1:
### Phase PREP_INIT/ADDON_TREAS:
### Phase PREP_INIT/ADDON_WFM:
### Phase PREP_INIT/ADDON_DMC:
### Phase PREP_INIT/ADDON_CMS:
### Phase PREP_INIT/ADDON_FND:
### Phase PREP_INIT/UCMIG_DECISION:
### Phase PREP_INIT/ACE_CHK:
### Phase PREP_INIT/CRM_BILL:
### Phase PREP_INIT/PR_DBPAR:
### Phase PREP_INIT/CHECKPROF_INI:
### Phase PREP_INIT/DB2_CHECKNOTES_INI:
### Phase PREP_IMPORT/DMPSPC_INI:
### Phase PREP_IMPORT/READDATA:
### Phase PREP_IMPORT/READDATA_EXT:
### Phase PREP_IMPORT/PATCHCONT_RDATAEXT:
### Phase PREP_IMPORT/TOOLFIX_CHK_ALL:
### Phase PREP_IMPORT/UNICODELIB_CHK1:
SAPup> Starting subprocess at 20120607071812
ENV: JAVA_HOME=C:\j2sdk1.4.2_17-x64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=F:\oracle\PRD\11202
ENV: ORACLE_SID=PRD
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: SAPDATA_HOME=F:\oracle\PRD
ENV: SAPSYSTEMNAME=PRD
ENV: auth_shadow_upgrade=0
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=PRD
EXECUTING E:\usr\sap\PRD\SUM\abap\exe\tp.exe (tp.exe) -V
This is E:\usr\sap\PRD\SUM\abap\exe\tp.exe version 380.03.82 (release 720, unicode enabled)
tp information
kernel release 720
kernel make variant 720_REL
DBMS client library OCI_11201_SHARE,
DBSL shared library version 720.00
compiled on NT 5.2 3790 S x86 MS VC++ 14.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time May 21 2012 19:56:35
update level 0
patch number 219
source id 0.219
supported environment
database (SAP, table SVERS) 700
710
701
702
711
720
730
DBMS server
ORACLE 10.1.0.*.*
ORACLE 10.2.0.*.*
ORACLE 11.2.*.*.*
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
tp patch information
( 0.001) Support for SAP releases 703 and 730 with 720 kernel (note 1334542)
( 0.001) Tp file deployment does not work (note 1331631)
( 0.001) Enhanced error handling during file system deployment (note 1332638)
( 0.001) RC 84 during deployment step (note 1332638)
( 0.012) Prevent tp start via gateway for security reasons (note 1371799)
( 0.012) Activation of enhancements during import (note 1053933)
( 0.016) Copy of generated BW objects within an upgrade (note 1382922)
( 0.018) Upgrade problem in phase TP_ACTION_CP2STAB (note 1388652)
( 0.018) Prevent tp start via gateway (compatibility change) (note 1371799)
( 0.019) Fix wrong size of tablsize (note 1388652)
( 0.021) Deleting DD objects in type T transports (note 7724)
( 0.031) Handling of unconfirmed transports (note 1372301)
( 0.031) Microsoft security patch (note 1375494)
( 0.032) Correct transport of LIMU DOCU TT (note 1420889)
( 0.034) Improved counter initialisation for RFC-GUID (note 1391335)
( 0.042) Avoid error in function tp_search_buffer_entry (note 1449610)
( 0.043) Correction concerning R3trans export (note 1457835)
( 0.048) DEV_TP_XXXX files in /tmp (note 1455239)
( 0.051) Tp terminates in function 'tp_search_buffer_entry' (note 1449610)
( 0.083) Langdeletions = auto (note 1558267)
( 0.084) Tp: TRUNCATE TABLE reports ERROR 64: no record found (note 1567984)
( 0.088) NTAB: Remove incompatible key length check (note 1580792)
( 0.090) Avoid overtaker problems with CTC=true and umode 0 (note 1333251)
( 0.091) Tp breaks when delivery after import fails (note 1592598)
( 0.100) 'tp import subset' uses client 0 instead of export client (note 1615166)
( 0.107) Missing import steps in import history (note 1625174)
( 0.107) Overtaker transports and CTC=true (note 1333251)
( 0.210) RSecSSFs: UTF8 conversion failed with returncode 1 (note 1678336)
( 0.210) Tp writelog did not work for long TR if nbufform was not s (note 1675626)
( 0.210) Installing/Updating SAP CTS Plug-In 2.0 (note 1665940)
( 0.211) Installing/Updating SAP CTS Plug-In 2.0 (note 1665940)
( 0.212) Installing/Updating SAP CTS Plug-In 2.0 (note 1665940)
( 0.215) IBM i: Problems with file locks in the transport directory (note 845879)
( 0.219) Tp clearold extension for cts+ and tmp directories (note 1694830)
dbsl patch information
( 0.002) Core dump in dbacockpit (note 1331586)
( 0.002) Individual solution without a specific SAP Note. (note 1331586)
( 0.005) DBSL error in connection with DBACOCKPIT (note 1350947)
( 0.027) Check NLS_LENGTH_SEMANTICS (note 1412123)
( 0.031) Avoid unnecessary connect attempts (note 1413668)
( 0.033) Avoid senseless connect attempts (2) (note 1413668)
( 0.034) Secondary connection to Oracle DB (note 808505)
( 0.051) Core dumps, LOBPREFETCH fails (note 1331586)
( 0.053) ABAP: Return technical database PPMS information (note 1419552)
( 0.054) ABAP: Return technical database PPMS information (note 1419552)
( 0.054) Technical database PPMS information (note 1419552)
( 0.058) Low performance esp. with long SQL statements (note 1489994)
( 0.064) Unwanted Oracle tracing (note 1505012)
( 0.073) Secondary connections to Oracle, corr. of connect error (note 808505)
( 0.077) Invalid number of records after INSERT (note 1535262)
( 0.079) Secondary connections to Oracle database (correction) (note 808505)
( 0.081) DBSL error in secondary connection (note 1506867)
( 0.084) Secondary connections to Oracle database, default charset (note 808505)
( 0.088) ERROR: Unregister application info (note 1480392)
( 0.089) Missing owner in menu system -> status (note 1589777)
( 0.090) Wrong owner in menu system -> status (note 1589777)
( 0.092) Secondary connection to HANA (note 1481256)
( 0.096) Application info (DBSL Oracle), correction (note 1480392)
( 0.098) Secure connect via secure store (note 1611877)
( 0.098) DBSL convertion: wrong error code (note 1610265)
( 0.102) Wrong message from conversion check function (note 1623140)
( 0.106) Select error in dbsl adbc interface (note 1632627)
( 0.109) Core dump in DlLoadLib2() loading the DBSL (note 1635509)
( 0.114) DBSL correction for Oracle type mapping (note 1655337)
( 0.120) DBSL: Wrong statement ID (note 1671255)
tp=>sapparam(1c): No Profile used.
tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
### Phase PREP_IMPORT/CNV_CHK_IMP:
### Phase PREP_IMPORT/ICNVCHK_IMP:
### Phase PREP_IMPORT/SCRIPT_CHK_TOOL4:
### Phase PREP_IMPORT/TRBATCHK_IMP:
### Phase PREP_IMPORT/CLNT_CHK_IMP:
### Phase PREP_IMPORT/INTCHK_IMP:
### Phase PREP_IMPORT/SPACECHK_IMP:
### Phase PREP_IMPORT/PATCH_CHK2:
### Phase PREP_IMPORT/ALTER_TO:
### Phase PREP_IMPORT/GENBUFFER_TOOLIMP:
### Phase PREP_IMPORT/TOOLIMPD:
SAPup> Starting subprocess at 20120607071817
ENV: JAVA_HOME=C:\j2sdk1.4.2_17-x64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=F:\oracle\PRD\11202
ENV: ORACLE_SID=PRD
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: SAPDATA_HOME=F:\oracle\PRD
ENV: SAPSYSTEMNAME=PRD
ENV: auth_shadow_upgrade=0
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=PRD
ENV: PATH=E:\usr\sap\PRD\DVEBMGS30\exe
EXECUTING E:\usr\sap\PRD\DVEBMGS30\exe\tp.exe (tp.exe) pf=E:\usr\sap\PRD\SUM\abap\var\TOOLIMPD.TPP put PRD
This is E:\usr\sap\PRD\DVEBMGS30\exe\tp.exe version 380.03.82 (release 720, unicode enabled)
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 21).
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 21).
Warning: Parameter DBCONFPATH is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
This is E:\usr\sap\PRD\DVEBMGS30\exe\R3trans.exe version 6.23 (release 720 - 27.03.12 - 17:30:00).
unicode enabled version
E:\usr\sap\PRD\DVEBMGS30\exe\R3trans.exe finished (0000).
R3trans=>sapparam(1c): No Profile used.
R3trans=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
tp finished with return code: 4
meaning:
A tool used by tp produced warnings
tp=>sapparam(1c): No Profile used.
tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
SAPup> Process with PID 11796 terminated with status 4 at 20120607071837!
### Phase PREP_IMPORT/MVNTAB_TOOL:
### Phase PREP_IMPORT/TOOLIMPI:
SAPup> Starting subprocess at 20120607071841
ENV: JAVA_HOME=C:\j2sdk1.4.2_17-x64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=F:\oracle\PRD\11202
ENV: ORACLE_SID=PRD
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: SAPDATA_HOME=F:\oracle\PRD
ENV: SAPSYSTEMNAME=PRD
ENV: auth_shadow_upgrade=0
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=PRD
ENV: PATH=E:\usr\sap\PRD\DVEBMGS30\exe
EXECUTING E:\usr\sap\PRD\DVEBMGS30\exe\tp.exe (tp.exe) pf=E:\usr\sap\PRD\SUM\abap\var\TOOLIMPI.TPP put PRD
This is E:\usr\sap\PRD\DVEBMGS30\exe\tp.exe version 380.03.82 (release 720, unicode enabled)
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 20).
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 20).
Warning: Parameter DBCONFPATH is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
This is E:\usr\sap\PRD\DVEBMGS30\exe\R3trans.exe version 6.23 (release 720 - 27.03.12 - 17:30:00).
unicode enabled version
E:\usr\sap\PRD\DVEBMGS30\exe\R3trans.exe finished (0000).
R3trans=>sapparam(1c): No Profile used.
R3trans=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
tp finished with return code: 0
meaning:
Everything OK
tp=>sapparam(1c): No Profile used.
tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
### Phase PREP_IMPORT/TOOLIMPM:
SAPup> Starting subprocess at 20120607071911
ENV: JAVA_HOME=C:\j2sdk1.4.2_17-x64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=F:\oracle\PRD\11202
ENV: ORACLE_SID=PRD
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: SAPDATA_HOME=F:\oracle\PRD
ENV: SAPSYSTEMNAME=PRD
ENV: auth_shadow_upgrade=0
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=PRD
ENV: PATH=E:\usr\sap\PRD\DVEBMGS30\exe
EXECUTING E:\usr\sap\PRD\DVEBMGS30\exe\tp.exe (tp.exe) pf=E:\usr\sap\PRD\SUM\abap\var\TOOLIMPM.TPP put PRD
This is E:\usr\sap\PRD\DVEBMGS30\exe\tp.exe version 380.03.82 (release 720, unicode enabled)
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 21).
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 21).
Warning: Parameter DBCONFPATH is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
tp finished with return code: 0
meaning:
Everything OK
tp=>sapparam(1c): No Profile used.
tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
### Phase PREP_IMPORT/TOOLIMP4_UCMIG:
### Phase PREP_IMPORT/NPREPCRE0:
### Phase PREP_PARSETUP/UVERS_SAVE:
### Phase PREP_PARSETUP/UVERS_PREIMP:
### Phase PREP_PARSETUP/UVERS_INIT:
### Phase PREP_PARSETUP/UVERS_CHK_IMP:
### Phase PREP_PARSETUP/BATCHCHK_IMP:
### Phase PREP_PARSETUP/SETUPGPAR_PARAMSHD:
### Phase PREP_PARSETUP/TOOLIMP_FEATURES:
### Phase PREP_PARSETUP/SETUPGPAR_PARAMEHP:
### Phase PREP_PARSETUP/SETUPGPAR_PDIFFEXP:
### Phase PREP_PARSETUP/SETUPGPAR_ITERATIVE:
### Phase PREP_PARSETUP/SETUPGPAR_STRESSMAKER:
### Phase PREP_PARSETUP/SETUPGPAR_UCMIG:
### Phase PREP_PARSETUP/SETUPGPAR_SINGLE_CUSTEXP:
### Phase PREP_PARSETUP/SETUPGPAR_VERSSHD:
### Phase PREP_PARSETUP/UCMIG_STATUS_SET0:
### Phase PREP_PARSETUP/CHECK4NOTES_TOOL:
### Phase PREP_CONFIGURATION/INITSUBST:
### Phase PREP_CONFIGURATION/ASKSWITCHES:
### Phase PREP_CONFIGURATION/DIR_SWITCH_ASK:
### Phase PREP_CONFIGURATION/EXTRACTKRN_DIAG:
### Phase PREP_CONFIGURATION/KX_CPYORG_DIAG:
### Phase PREP_CONFIGURATION/SCANDIR_KRNLDIAG:
### Phase PREP_CONFIGURATION/INSTANCELIST_INFO:
### Phase PREP_CONFIGURATION/RUN_RSTODIRM_CLEAN:
### Phase PREP_CONFIGURATION/NANOTES_PREP:
### Phase PREP_CONFIGURATION/EXECLANG:
### Phase PREP_CONFIGURATION/LANG_CHK:
### Phase PREP_CONFIGURATION/LANG_SELECT:
### Phase PREP_CONFIGURATION/RUN_RSUPGSLI:
### Phase PREP_SETUP/JOB_RSCREATE_PUTTBS:
### Phase PREP_SETUP/RUN_GENPUTTBSHD:
### Phase PREP_SETUP/RUN_RSCPINTS_INITPUTTB:
### Phase PREP_SETUP/RUN_RSPTBFIL_PREP:
### Phase PREP_SETUP/RUN_RSINCGEN_IMP:
### Phase PREP_SETUP/READPUTTB_INI:
### Phase PREP_SETUP/JOB_RDDGENRS:
### Phase PREP_SETUP/TR_BUF2HEAP_INSTIMP:
### Phase PREP_SETUP/TR_EXT2HEAP:
### Phase PREP_SETUP/SETUPGPAR_PARAMCOMP:
### Phase PREP_SETUP/JOB_RDDPURI2:
### Phase PREP_SETUP/SQLDB_CLEANINDCRE:
### Phase PREP_SETUP/LC_CHECK:
### Phase PREP_SETUP/MSSMETA:
### Phase PREP_SETUP/UPD_HOSTAGENT:
### Phase PREP_EXTENSION/JOB_RSUPGINIT:
### Phase PREP_EXTENSION/NCVERS_READ:
### Phase PREP_EXTENSION/UPLOAD_FIRST:
### Phase PREP_EXTENSION/COMPINFO_EXP:
### Phase PREP_EXTENSION/UPLOAD_REQUEST:
### Phase PREP_EXTENSION/SELSTACKXML_READ:
### Phase PREP_EXTENSION/IS_MV_CHK1:
### Phase PREP_EXTENSION/NAVERS_READ:
### Phase PREP_EXTENSION/SQLDB_AVERS_PIBASIS:
### Phase PREP_EXTENSION/UPG_TYPE:
### Phase PREP_EXTENSION/IS_INIT:
### Phase PREP_EXTENSION/IS_INST_BICONT:
### Phase PREP_EXTENSION/IS_INST_LIST:
### Phase PREP_EXTENSION/IS_INST:
### Phase PREP_EXTENSION/COMPINFO_ISINST:
### Phase PREP_EXTENSION/ADDON_TRBK:
### Phase PREP_EXTENSION/ADDON_DYN:
### Phase PREP_EXTENSION/CHECK4SOLMAN_EHP1:
### Phase PREP_EXTENSION/IS_MOVEMENT:
### Phase PREP_EXTENSION/COMPINFO_ISMV:
### Phase PREP_EXTENSION/SFW_MOVEMENT:
### Phase PREP_EXTENSION/COMPINFO_SFWMV:
### Phase PREP_EXTENSION/ADDONSPEC_OIL:
### Phase PREP_EXTENSION/ADDONSPEC_ISPSCA:
### Phase PREP_EXTENSION/RUN_RSUPGSFW:
### Phase PREP_EXTENSION/IS_TABDMP_EHP:
### Phase PREP_EXTENSION/SCANDIR_EPS:
### Phase PREP_EXTENSION/EHP_INCLUSION:
### Phase PREP_EXTENSION/JOB_MOBILE1:
### Phase PREP_EXTENSION/COMPINFO_EHP:
### Phase PREP_EXTENSION/IS_TABDMP_INC:
### Phase PREP_EXTENSION/ADDONSEPARATION:
### Phase PREP_EXTENSION/NAVERS2_HANDLE_INIT:
### Phase PREP_EXTENSION/NCVERS2_HANDLE_INIT:
### Phase PREP_EXTENSION/NAVERS2_DELSAINT_C_W:
### Phase PREP_EXTENSION/NAVERS2_DELSAINT_E_W:
### Phase PREP_EXTENSION/IS_SELECT:
### Phase PREP_EXTENSION/ADDONKEY_CHK:
### Phase PREP_EXTENSION/COMPINFO_ADDON:
### Phase PREP_EXTENSION/ADDON_QCALC:
### Phase PREP_EXTENSION/IS_MV_CHK2:
### Phase PREP_EXTENSION/TR_EXPPKG2HEAP:
### Phase PREP_EXTENSION/PATCHK_EQUI:
### Phase PREP_EXTENSION/PATCH_CHK3:
### Phase PREP_EXTENSION/BIND_PATCH:
### Phase PREP_EXTENSION/COMPINFO_SPP:
### Phase PREP_EXTENSION/ADDON_LANGINC:
### Phase PREP_EXTENSION/CHK_SELDELSAINT:
### Phase PREP_EXTENSION/TR_CMDIMPORT_FDTASKS:
### Phase PREP_EXTENSION/IS_MERGE:
### Phase PREP_EXTENSION/TR_QUEUE2HEAP:
### Phase PREP_EXTENSION/TR_BUF2HEAP_CUST:
### Phase PREP_EXTENSION/IS_TREMPTY:
### Phase PREP_EXTENSION/TR_CMDIMPORT_PREPARE:
### Phase PREP_EXTENSION/TR_CMDIMPORT_CUST:
### Phase PREP_EXTENSION/JOB_RDDIT020:
### Phase PREP_EXTENSION/IS_SYNC_20:
### Phase PREP_EXTENSION/CONFLICT_CHECK:
### Phase PREP_EXTENSION/UCMIG_REQINC:
### Phase PREP_EXTENSION/ICNVXRQ:
### Phase PREP_INTEGRATION/CHANGEDESTVERS:
### Phase PREP_INTEGRATION/ADJUSTPRP:
### Phase PREP_INTEGRATION/FRP_CHK:
### Phase PREP_INTEGRATION/EHPNOTE_CHK:
### Phase PREP_INTEGRATION/SCANDIR_KRN:
### Phase PREP_INTEGRATION/TOOLVERSION_EXE:
### Phase PREP_INTEGRATION/TOOLVERSION2_EXE:
### Phase PREP_INTEGRATION/SAPCRYPTOLIB_CHK:
### Phase PREP_INTEGRATION/SCANDIR_CRYPTO:
### Phase PREP_INTEGRATION/RUN_RSTODIRM_BIND:
### Phase PREP_INTEGRATION/TR_TODIR_MERGE_PATCH:
### Phase PREP_INTEGRATION/JOB_RDDIT021:
### Phase PREP_INTEGRATION/UVERS_UP_T:
### Phase PREP_INTEGRATION/SQLDB_RSA_UPD:
### Phase PREP_INTEGRATION/GENBUFFER_PREPUT:
### Phase PREP_INTEGRATION/INITTOOL_PHL:
### Phase PREP_INSTALL/WINSRV_DELSHD0:
### Phase PREP_INSTALL/INITSHD:
### Phase PREP_INSTALL/SHDINST_CRE:
### Phase PREP_INSTALL/SHDINST_CPY:
### Phase PREP_INSTALL/SHDINST_ADAPT:
### Phase PREP_INSTALL/SHDINST_MOD_RESS:
### Phase PREP_INSTALL/SHDINST_MOD_DOWN:
### Phase PREP_INSTALL/CHANGEPROF_SHDADAPT:
### Phase PREP_INSTALL/CHANGEPROF_SHD_SA_ENQUEUE:
### Phase PREP_INSTALL/CHANGEPROF_SHD_SRV_TRC:
### Phase PREP_INSTALL/CHANGEPROF_SHD_MPL:
### Phase PREP_INSTALL/SHDINST_REQ:
### Phase PREP_INSTALL/SAPMMC_PRE:
### Phase PREP_INSTALL/SHDINST_OS:
SAPup> Starting subprocess at 20120607105451
ENV: JAVA_HOME=C:\j2sdk1.4.2_17-x64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=F:\oracle\PRD\11202
ENV: ORACLE_SID=PRD
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: SAPDATA_HOME=F:\oracle\PRD
ENV: SAPSYSTEMNAME=PRD
ENV: auth_shadow_upgrade=0
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=PRD
ENV: PATH=E:\usr\sap\PRD\SUM\abap\exe
EXECUTING E:\usr\sap\PRD\SUM\abap\exe\sapstartsrv.exe (sapstartsrv.exe) <args>...
Service succesfully installed.
### Phase PREP_INSTALL/SHDINST_SDB_CHK:
### Phase PREP_INSTALL/SHDUNINST_DB_PREP:
### Phase PREP_INSTALL/SHDINST_DB_PREP:
### Phase PREP_INSTALL/SHDINST_SWT_HOST:
### Phase PREP_INSTALL/SHDINST_PFPAR:
### Phase PREP_INSTALL/RUN_RSUPGRFC:
### Phase PREP_INSTALL/SCANDIR_SHOW:
### Phase PREP_INSTALL/RUN_UPDPUTTBSHD_SHD2:
### Phase PREP_INSTALL/RUN_RSPTBFIL_SPACE:
### Phase PREP_INSTALL/READPUTTB_SPACE:
### Phase PREP_INSTALL/RUN_RSDBSCPY_INIT:
### Phase PREP_SPACECALC/INIT_CNTRANS_NEW:
### Phase PREP_SPACECALC/CNTRANS_NEW:
### Phase PREP_SPACECALC/MULTSPC_UC:
### Phase PREP_SPACECALC/TR_GET_SPCREQ_IMP:
### Phase PREP_SPACECALC/TR_GET_SPCREQ_ADD:
### Phase PREP_SPACECALC/TR_GET_SPCREQ_DISC:
### Phase PREP_SPACECALC/TR_COLLTABS_PRP:
### Phase PREP_SPACECALC/TABSPC_PREP:
### Phase PREP_SPACECALC/RUN_GENOBJNUM:
### Phase PREP_SPACECALC/LIST_LOAD_SPC:
### Phase PREP_SPACECALC/DYNSPCADD:
### Phase PREP_SPACECALC/EU_IMPSPC:
### Phase PREP_SPACECALC/GET_CLONE_SIZE:
### Phase PREP_SPACECALC/SPCJ2EEMERGE:
### Phase PREP_SPACECALC/ADDFSREQ_FS:
### Phase PREP_SPACECALC/ADDSPAREQ_UPG:
### Phase PREP_SPACECALC/ADDSPAREQ_EHPI:
### Phase PREP_SPACECALC/ADDSPAREQ_TRANS:
### Phase PREP_GENCHECKS/CONFCHK:
### Phase PREP_GENCHECKS/JOB_SUSINUPG:
### Phase PREP_GENCHECKS/DB_ACTION_RUN_PRE:
### Phase PREP_GENCHECKS/CHK_DB6_DEF_TAB:
### Phase PREP_GENCHECKS/CHK_DB6_PAR_PRE:
### Phase PREP_GENCHECKS/CHK_DB6_GLOBAL_FILES:
### Phase PREP_GENCHECKS/CHK_DB6_4K_TBSP_PRE:
### Phase PREP_GENCHECKS/UNICODELIB_CHK2:
SAPup> Starting subprocess at 20120607121819
ENV: JAVA_HOME=C:\j2sdk1.4.2_17-x64
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=F:\oracle\PRD\11202
ENV: ORACLE_SID=PRD
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: SAPDATA_HOME=F:\oracle\PRD
ENV: SAPSYSTEMNAME=PRD
ENV: auth_shadow_upgrade=0
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=PRD
EXECUTING E:\usr\sap\PRD\SUM\abap\exe\tp.exe (tp.exe) -V
This is E:\usr\sap\PRD\SUM\abap\exe\tp.exe version 380.03.82 (release 720, unicode enabled)
tp information
kernel release 720
kernel make variant 720_REL
DBMS client library OCI_11201_SHARE,
DBSL shared library version 720.00
compiled on NT 5.2 3790 S x86 MS VC++ 14.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time May 21 2012 19:56:35
update level 0
patch number 219
source id 0.219
supported environment
database (SAP, table SVERS) 700
710
701
702
711
720
730
DBMS server
ORACLE 10.1.0.*.*
ORACLE 10.2.0.*.*
ORACLE 11.2.*.*.*
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
tp patch information
( 0.001) Support for SAP releases 703 and 730 with 720 kernel (note 1334542)
( 0.001) Tp file deployment does not work (note 1331631)
( 0.001) Enhanced error handling during file system deployment (note 1332638)
( 0.001) RC 84 during deployment step (note 1332638)
( 0.012) Prevent tp start via gateway for security reasons (note 1371799)
( 0.012) Activation of enhancements during import (note 1053933)
( 0.016) Copy of generated BW objects within an upgrade (note 1382922)
( 0.018) Upgrade problem in phase TP_ACTION_CP2STAB (note 1388652)
( 0.018) Prevent tp start via gateway (compatibility change) (note 1371799)
( 0.019) Fix wrong size of tablsize (note 1388652)
( 0.021) Deleting DD objects in type T transports (note 7724)
( 0.031) Handling of unconfirmed transports (note 1372301)
( 0.031) Microsoft security patch (note 1375494)
( 0.032) Correct transport of LIMU DOCU TT (note 1420889)
( 0.034) Improved counter initialisation for RFC-GUID (note 1391335)
( 0.042) Avoid error in function tp_search_buffer_entry (note 1449610)
( 0.043) Correction concerning R3trans export (note 1457835)
( 0.048) DEV_TP_XXXX files in /tmp (note 1455239)
( 0.051) Tp terminates in function 'tp_search_buffer_entry' (note 1449610)
( 0.083) Langdeletions = auto (note 1558267)
( 0.084) Tp: TRUNCATE TABLE reports ERROR 64: no record found (note 1567984)
( 0.088) NTAB: Remove incompatible key length check (note 1580792)
( 0.090) Avoid overtaker problems with CTC=true and umode 0 (note 1333251)
( 0.091) Tp breaks when delivery after import fails (note 1592598)
( 0.100) 'tp import subset' uses client 0 instead of export client (note 1615166)
( 0.107) Missing import steps in import history (note 1625174)
( 0.107) Overtaker transports and CTC=true (note 1333251)
( 0.210) RSecSSFs: UTF8 conversion failed with returncode 1 (note 1678336)
( 0.210) Tp writelog did not work for long TR if nbufform was not s (note 1675626)
( 0.210) Installing/Updating SAP CTS Plug-In 2.0 (note 1665940)
( 0.211) Installing/Updating SAP CTS Plug-In 2.0 (note 1665940)
( 0.212) Installing/Updating SAP CTS Plug-In 2.0 (note 1665940)
( 0.215) IBM i: Problems with file locks in the transport directory (note 845879)
( 0.219) Tp clearold extension for cts+ and tmp directories (note 1694830)
dbsl patch information
( 0.002) Core dump in dbacockpit (note 1331586)
( 0.002) Individual solution without a specific SAP Note. (note 1331586)
( 0.005) DBSL error in connection with DBACOCKPIT (note 1350947)
( 0.027) Check NLS_LENGTH_SEMANTICS (note 1412123)
( 0.031) Avoid unnecessary connect attempts (note 1413668)
( 0.033) Avoid senseless connect attempts (2) (note 1413668)
( 0.034) Secondary connection to Oracle DB (note 808505)
( 0.051) Core dumps, LOBPREFETCH fails (note 1331586)
( 0.053) ABAP: Return technical database PPMS information (note 1419552)
( 0.054) ABAP: Return technical database PPMS information (note 1419552)
( 0.054) Technical database PPMS information (note 1419552)
( 0.058) Low performance esp. with long SQL statements (note 1489994)
( 0.064) Unwanted Oracle tracing (note 1505012)
( 0.073) Secondary connections to Oracle, corr. of connect error (note 808505)
( 0.077) Invalid number of records after INSERT (note 1535262)
( 0.079) Secondary connections to Oracle database (correction) (note 808505)
( 0.081) DBSL error in secondary connection (note 1506867)
( 0.084) Secondary connections to Oracle database, default charset (note 808505)
( 0.088) ERROR: Unregister application info (note 1480392)
( 0.089) Missing owner in menu system -> status (note 1589777)
( 0.090) Wrong owner in menu system -> status (note 1589777)
( 0.092) Secondary connection to HANA (note 1481256)
( 0.096) Application info (DBSL Oracle), correction (note 1480392)
( 0.098) Secure connect via secure store (note 1611877)
( 0.098) DBSL convertion: wrong error code (note 1610265)
( 0.102) Wrong message from conversion check function (note 1623140)
( 0.106) Select error in dbsl adbc interface (note 1632627)
( 0.109) Core dump in DlLoadLib2() loading the DBSL (note 1635509)
( 0.114) DBSL correction for Oracle type mapping (note 1655337)
( 0.120) DBSL: Wrong statement ID (note 1671255)
tp=>sapparam(1c): No Profile used.
tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
### Phase PREP_GENCHECKS/CHECK4NOTES_PACKAGES:
### Phase PREP_GENCHECKS/CHECK4HOTFIX:
### Phase PREP_GENCHECKS/DB_ACTION_PRE:
### Phase PREP_GENCHECKS/DB_ACTION_EXTMAN:
### Phase PREP_GENCHECKS/MSSQL_SCHEMA_PRE:
### Phase PREP_GENCHECKS/CNV_CHK_GEN:
### Phase PREP_GENCHECKS/CHK_ICNVFLAGS:
### Phase PREP_GENCHECKS/TRBATCHK_GEN:
### Phase PREP_GENCHECKS/CLNT_CHK_GEN:
### Phase PREP_GENCHECKS/SCRIPT_TST_DDART:
### Phase PREP_GENCHECKS/NTACT_CHK:
### Phase PREP_GENCHECKS/INTCHK_GEN:
### Phase PREP_GENCHECKS/SINXCHK:
### Phase PREP_GENCHECKS/VIEWCHK_PRP:
### Phase PREP_GENCHECKS/ENVCHK_PRE:
### Phase PREP_GENCHECKS/FRONTREQ_PRE:
### Phase PREP_GENCHECKS/UVERS_CHK_GEN:
### Phase PREP_GENCHECKS/BATCHCHK_GEN:
### Phase PREP_GENCHECKS/SCRIPT_TST_TCPDB:
### Phase PREP_GENCHECKS/SCRIPT_TST_TCP0C:
### Phase PREP_GENCHECKS/SCRIPT_TST_TCPDB_UC:
### Phase PREP_GENCHECKS/MERGEPROF_CHECK:
### Phase PREP_GENCHECKS/CHECKLANGCP_PREP:
### Phase PREP_GENCHECKS/ACTREF_CHK:
### Phase PREP_SPACECHECKS/FREECHK:
### Phase PREP_SPACECHECKS/SPACECHK_OPT:
### Phase PREP_MODSUPPORT/REPACHK:
### Phase PREP_MODSUPPORT/TR_CONVHEAP_IT006:
### Phase PREP_MODSUPPORT/RUN_RDDIT006_PRE:
### Phase PREP_MODSUPPORT/ADJUSTCHK_PRE_UPG:
### Phase PREP_MODSUPPORT/ADJUSTCHK_PRE_EHPI:
### Phase PREP_SPACECHECKS/FREECHK:
### Phase PREP_SPACECHECKS/SPACECHK_OPT:
### Phase PREP_SPACECHECKS/FREECHK:
### Phase PREP_SPACECHECKS/SPACECHK_OPT:
### Phase MAIN_INIT/BEGIN:
### Phase MAIN_INIT/INITPUT:
### Phase MAIN_INIT/DBCHK:
### Phase MAIN_INIT/J2EE_CHK2:
### Phase MAIN_INIT/SETSYNC_UPGR_STARTED:
### Phase MAIN_INIT/SETSYNC_PREUP_STARTED:
### Phase MAIN_INIT/VERSCHK:
### Phase MAIN_INIT/UVERS_CHK:
### Phase MAIN_INIT/BATCHCHK:
### Phase MAIN_INIT/PATCH_CHK:
### Phase MAIN_INIT/CLNT_CHK:
### Phase MAIN_INIT/INTCHK:
### Phase MAIN_INIT/TOOLVERSION_UPG:
### Phase MAIN_INIT/ADDON_SPEC2:
### Phase MAIN_INIT/SHDINST_CHK1:
### Phase MAIN_INIT/SAPMMC_UPG:
### Phase MAIN_INIT/CONFCHK_X:
### Phase MAIN_INIT/VIEWCHK_D:
### Phase MAIN_INIT/VIEWCHK_R:
### Phase MAIN_INIT/REPACHK1:
### Phase MAIN_INIT/UCMIG_STATUS_CHK:
### Phase MAIN_INIT/SQLDB_ICNVSETMINROWS:
### Phase MAIN_INIT/TABSPC_UPG:
### Phase MAIN_INIT/CHK_DB6_REG_UPG:
### Phase MAIN_INIT/DB_ACTION_RUNSTATS:
### Phase MAIN_INIT/CHK_DB6_PAR_UPG:
### Phase MAIN_INIT/CHK_DB6_4K_TBSP_UPG:
### Phase MAIN_INIT/SPACECHK_ALL:
### Phase MAIN_INIT/FREECHK_X:
### Phase MAIN_INIT/DMPSPC_X:
### Phase MAIN_INIT/JOB_BTCTRNS0:
### Phase MAIN_INIT/RUN_RSPTBFIL_INIT:
### Phase MAIN_INIT/RUN_RCRR_TFW_INI:
### Phase MAIN_INIT/RUN_RSPTBFIL_INIT2:
### Phase MAIN_INIT/READPUTTB_UPG:
### Phase MAIN_INIT/SQLDB_SWITCH_DOCU:
### Phase MAIN_INIT/LOCKEU_PRE:
### Phase MAIN_INIT/LMSEMAPHORE_REMPRE:
### Phase MAIN_INIT/REPACHK_CLONE:
### Phase MAIN_INIT/UVERS_UP_U:
### Phase MAIN_INIT/ADJUSTCHK_TRANS:
### Phase MAIN_INIT/LIST_LOAD:
### Phase MAIN_INIT/CHECKCDMOUNTS:
### Phase MAIN_INIT/SETSYNC_PREUP_FINI_EUIMP:
### Phase MAIN_INIT/GETSYNC_PREUP_FINI_EUIMP:
### Phase MAIN_INIT/CONFCHK_BAS:
### Phase MAIN_INIT/DB_ACTION_UPG:
### Phase MAIN_INIT/CNTRANS_TPL:
### Phase MAIN_INIT/JOB_MC01_CACL_CDP_POST1:
### Phase MAIN_INIT/JOB_GN_BEF_UPG_CRM40_1:
### Phase MAIN_INIT/INSTTEMPLIC_MSGKEY:
SOLVED! My problem here was:
SAPup broke during phase JOB_RSUPGINIT in module PREP_EXTENSION / Extension module
Error Message: RFC login to system WSO ashost dewdftv01509 nr 00 gwhost dewdftv01509 gwservice sapgw00 failed with code 1 key RFC_COMMUNICATION_FAILURE:
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.208.149.116:3300' not reached
TIME Thu Jul 17 23:42:49 2014
RELEASE 721
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3283
DETAIL NiPConnect2: 10.208.149.116:3300
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 4
I solved it changing the owner of the files to the <sid>adm once again.
I had copied the kernel to the host with a root login.
This messed up with the file ownership and the system was not going up.
Although the startsap was not failing, the system was not up, I could not login.
Then I retried the SUM step and it got resolved. -
Problem in moving transport request
Hi,
While performing transports at OS level, we are facing some error.
below is the log. Please look into this issue.
We have already trigged manually RDDNEWPP and
SAP_TRIGGER_RDDIMPDP from client 000
>tp import pf=TP_DOMAIN_FD3.PFL FD3K915202 FT3 CLIENT=010 U01268
This is tp version 372.04.08 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: The following call returned with exit code 236:
ERROR: sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
We have also manually triggerred RDDIMPDP via sapevt from OS level. But issue still persist.
There is no error in Import log and import history. But we are getting the below error in slog.
WARNING: System FT3. Warning. 20090602114617 :
ERROR: The following call returned with exit code 236:
ERROR: sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
WARNING: (This warning is harmless if no further warnings follow.)
The error in dev_evt is as follows:
Tue Jun 2 09:51:58 2009
Trace File of External Event Raiser (Level=2, Append=0)
EventID: SAP_TRIGGER_RDDIMPDP
ERROR ***: Cannot determine mshost
Please suggest..................
Thanks,
Sourav MisraI have resolved the problem........
As per SAP note 821875 point 2(Security settings in the message server), MSEACCESSDENIED (or rc= -20) errors message can occur if the parameter rdisp/msserv_internal is not defined with 0 value
We have removed rdisp/msserv_internal from instance profile, and add it again in the DEFAULT profile with 0 value. Remember that, after this, it's important to check that the value has been correctly changed in the correct file DEFAULT.PFL
After this, we have restarted the instance.
I have attached also the following SAP note for information:
826779 - sapevt (Version 5): Security settings in the Msg.g.
Please maintain the RDDIMPDP in all clients with user
DDIC in accordanceof note 11677. Goto SE38, use RDDNEWPP
to schedule RDDIMPDP on client
000 and other client with DDIC user.
Thanks,
Sourav Misra
IBM -
Error in IMPORT_PROPER while applying SAP_APPL 12 SP in ECC 6
Hi All,
I am applying Support pack12 of SAP_APPL (SAPKH60012) in my ECC 6.0. The system is on linux with oracle 10.2 G.
the patch implementation is stopping at IMPORT_PROPER (Error_Stop). I have checked TP and everything is running fine. I am pasting below the action log of the same. Please let me know what could be the problem. Also let me know if required anything else.
Import phase 'IMPORT_PROPER' (15.01.2009, 08:29:49)
Error during executing the tp command 'tp IMPORT all ECD ...'
tp return code: '0012' , tp message: 'A tool used by tp aborted' , tp output:
This is tp version 372.04.08 (release 700, unicode enabled)
Warning: Parameter DICTIMP_PROC is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DICTIMP_PROC is no longer used.
ERROR: stopping on error 12 during MOVE NAMETABS
stopping on error 12 during MOVE NAMETABS
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
Details of the error situation can also be found in the import logs
Interrupt the import due to an error situation (15.01.2009, 08:31:35)
Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (15.01.2009, 08:31:40)
Thanks,
Bhanu Pratap SinghHi,
I went through SLOG and ALOG but it was too long and nothing appropriate is there. Find below the P090115.SID Log. It is saying to activate two shadow name tabs. but i didn't know how.
1 ETP172 MOVE OF NAMETABS
1 ETP101 transport order : "ALL"
1 ETP102 system : "ECD"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.08" "700"
1 ETP198
3 ETP399XMove Nametabs started in batch mode.
2 ETP399 processing modeflag 'A'
2 ETP301 -
2 ETP364 Begin: Act. of Shadow-Nametabs ("2009/01/15 22:46:56")
2 ETP301 -
2 ETP301 -
2 ETP338XActivation of Shadownametabs
2 ETP301 -
3 ETP379Xactivating Nametab "WVERW_045D":
2 ETP399 -
DB-ROLLBACK() -
2AETP399XWrite table "WVERW_045D ": pgntab call: SQL error.
3 ETP379Xactivating Nametab "WVERW_045G":
2 ETP399 -
DB-ROLLBACK() -
2AETP399XWrite table "WVERW_045G ": pgntab call: SQL error.
2 ETP301 -
3 ETP365 "0" Shadow-Nametabs activated
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP364 Begin: Act. of Shadow-Nametabs ("2009/01/15 22:46:56")
2 ETP366 End: Act. of Shadow-Nametabs ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'W'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'X'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
P090115 Log
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'Y'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'F'
2 ETP301 -
2 ETP330XActivation of Shadownametabs with DDL
2 ETP301 -
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
3 ETP362 "0" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'V'
2 ETP301 -
2 ETP330XActivation of Shadownametabs with DDL
2 ETP301 -
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
3 ETP362 "0" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20090115224759"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Thanks,
Bhanu -
Installing EHP4 on ERP 6.0: Checks after Phase SHD_RUN/ACT_UPG were negativ
hi
I'm installing the EHP4 on an ERP 6.0 System and get the following error:
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer EH4 Check logfiles 'ACTUPG.ELG' and 'C:\usr\sap\EH4\upg\abap\log\SAPehpi.ECO'
Here is a part of SAPEhpi.EH4:
SAPehpi> Starting subprocess tp.exe with id 5208 at 20090727150713
EXECUTING C:\usr\sap\EH4\upg\abap\exe\tp.exe pf=C:\usr\sap\EH4\upg\abap\bin\ACTUPG.TPP put EH4
Environment: JAVA_HOME=C:\j2sdk1.4.2_16-x64
Environment: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
Environment: Path=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\j2sdk1.4.2_16-x64\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\usr\sap\EH4\DVEBMGS00\exe
Environment: dbs_mss_schema=eh4
This is C:\usr\sap\EH4\upg\abap\exe\tp.exe version 372.04.65 (release 701, unicode enabled)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
stopping on error 12 during DD ACTIVATION
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 12
meaning:
A tool used by tp aborted
ERROR: stopping on error 12 during DD ACTIVATION
Process with ID 17820 terminated with status 12
Part of ACTUPG.EH4:
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-40401INEAIPPE.EH4
1 ETP111 exit code : "12"
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DDINEAAPPL.EH4
1 ETP111 exit code : "12"
I applied the note 1306559 but it didn't help.
someone has an idea?
thank younow i got some data from the shadow instance
JOB:
RDDMASGL DDIC Canceled
JOB LOG:
Job started
Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC)
Start of mass activation 10:37:39
ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Job cancelled
Runtime Error Short Text
No roll storage space of length 638992 available for internal storage.
Error Analysis
Error analysis
The internal table "\FUNCTION=DD_MASS_ACT_C3\DATA=DEPTAB" could not be enlarged
further.
Memory location: "Session memory"
You attempted to extend the data structure for the management of the
memory blocks for table "\FUNCTION=DD_MASS_ACT_C3\DATA=DEPTAB". However, the
638992 bytes required for
this were no longer available in the specified memory area.
The amount of memory requested is no longer available.
should i also apply the note 1306559 in the shadow instance?
thx
Edited by: Joachim Knittl on Jul 29, 2009 3:30 PM
Maybe you are looking for
-
Session Timeout and Url Redirect in BlazeDS?
We have a JSF2 Webapp and Flex 4 integreated. Question 1. How can we pass the parameters in web.xml to make FLEX4 redirect to login page when the session timeouts instead of giving a AMF Communication Error? Thanks, User.
-
Import PO error - You cannot enter new delivery costs
Hi Guru's, I hv created import PO with 10 qty and done the custom MIRO, later i cancelled the custom MIRO. Now i am trying to add or Delete any condition in PO, System is giving below error. You cannot enter new delivery costs can anyone suggest. Re
-
Hierarchial list output to internal table
Hi Folks, REPORT ZMB51 . DATA LIST_TAB TYPE TABLE OF ABAPLIST. <b>DATA: BEGIN OF olist OCCURS 0, filler1(1500) TYPE c, END OF olist.</b> submit RM07DOCS EXPORTING LIST TO MEMORY AND
-
I notice suggestions that people report this connection problem, the more the better. Who do you report it to? I am going to an Apple Store tomorrow to ask for help, but doubt that I will get any. Where else can I report it? And if Apple comes up
-
Hi, Was just wondering, is it possible to set up a JTable displaying all the values from a table in my DB, set it to editable and then when pressing a button, update any altered values in the DB. I.e. if table contains values: 1 2 3 4 5 and in a JTab