Re: Equium A210-171 - How can I burn a Recovery disk

I have a Equium A210-171 and I believe there is and onboard recovery to bring back to factory settings.
Could someone please help be in how I can do this or burn the onboard to cd. or even where I can get the cd from.
Cheers

If you didnt get recovery DVD and if you have HDDRecovery folder on second partition, that means your notebook is delivered with HDD image only.
You can create recovery media using Toshiba Recovery Disc Creator. The shortcut should be placed on the desktop.
I have done this several times on different models successfully using all the time Verbatim or TDK DVD-R media.

Similar Messages

  • How can I get a recovery disk for Satellite P300-1CI?

    Hi everybody,
    first, sorry for my english, I'm a belgian and I speak french.
    Yesterday I bought a toshiba Satellite P300-1CI, when I started, I must installed Vista home.
    I would like to format my disk and reinstall my old Windows XP.
    My question is : How can keep an image disk with Vista? I don't have an installation disk of Vista and don't know my registration key of it.
    How can I have a recovery disk ?
    Can you help me please.
    PS : Sorry for my english

    Hi mate
    User manual is really interesting document and in most cases it answer all you questions ;)
    Anyway, the Toshiba recovery disk should be created before you would format and install on the HDD.
    You have to use the preinstalled Toshiba Recovery Disk Creator application in order to create the Recovery DVD.
    Now to you other question;
    The Vista image which is preinstalled and placed on the Recovery disk (after recovery disk has been created) is activated already and you dont need to insert any keys or activate anything.
    Greets

  • How can I make a recovery disk for an imac 24 "  early 2008 to April 2009 or connect via thunderbolt to another imac

    How can I make a recovery disk for an imac 24 "  early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 "   or connect via thunderbolt to another imac
    ann

    You will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
    What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
    Boot Using Command+R keys:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "COMMAND" and the "R" keys together.
      3. Release the keys when the Utilities Menu appears.

  • Equium A210 -171 - how do I re-install Vista

    Hi,
    I was updating the O/S (Vista 32Bit) on-line from Microsoft when the laptop (Equium A210 -171) shutdown.
    It may have reached the overheating limit and this is the reason that it shutdown (me guessing).
    I let the computer cool down and when I tried to boot from the instructions as per
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1845345& rpn=PSL48U&modelFilter=L45-S7423&selCategory=3&selFamily=107376866
    the computer seems to lock up.
    When I get to boot in Safemode the computer seems to lock up on \windows\system32\drivers\disk.sys or some other system file.
    The action of pressing 0 and then turning on the computer with the Product Recovery CD-ROM in the drive also results in a lock up of the system resulting in a black screen only. Pressing C at startup also produces the same effect.
    As a test I put a Linux Ubuntu CD-ROM into the drive to see if I could run another O/S on a different HD.
    This action was successful. But my children need Windows for the games that they play.
    So, my question is ... how do I re-install Vista. The factory re-install setup seems to be not functioning.
    Many thanks,
    Tommy.

    > As a test I put a Linux Ubuntu CD-ROM into the drive to see if I could run another O/S on a different HD.
    I mean you have installed a Linux on different partition and not HDD. Right.
    Well, this means that HDD is OK and the notebook should run with Windows as well.
    > The action of pressing 0 and then turning on the computer with the Product Recovery CD-ROM in the drive also results in a lock up of the system resulting in a black screen only. Pressing C at startup also produces the same effect.
    First of all I recommend start the BIOS and to set booting from CD/DVD drive at the beginning.
    Then save the changes and reboot the unit.
    While pressing the power button, press F12.
    This allows you to get the boot menu on the screen.
    Insert the Windows installation disk (or Toshiba recovery disk) and choose ODD (CD/DVD drive)
    Then notebook should start to boot from CD/DVD drive.
    Note; if you are using Windows CD (not recovery disk) then you should change an option in BIOS.
    Set the SATA mode to compatible and save the changes.

  • How can i restore from Recovery Disk if my notebook's hard drive and dvd drives are dead.

    Hi. Good day. My hard drive just crashed and im trying to restore from my restore disks. Unfortunately, my dvd is dead too. I copied the recovery disks to a new hard drive and tried booting from a flash drive but the noteebook is still giving me the SMART hd error message. Please help. Thanks.

    Hi,
    If you have, or can borrow an external CD/DVD drive it would be worth trying this although I'm not certain your notebook will support booting from a drive connected via USB.
    Another option may be to see if you can find a second hand optical drive on somewhere like Ebay - the drives compatible with your notebook can be found on Page 59 of your Maintenance & Service Guide.  It may even be worth removing a re-seating your existing drive just in case this helps as described in this section.
    Does the drive show up in Device Manager?  If it does, right click it and select Properties.  Select the driver tab and see if there is an error code in the status box.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Equium A210-171 - Maximum hard drive capacity?

    What is the max capacity hard drive the equium a210-171 can take?

    Hi turboiwan,
    As far as I know Equium A210-171 has already SATA interface for HDD so you can install every HDD with this interface because on SATA standard are no capacity limits. That means 500GB HDDs or more would work.
    For example I upgraded my notebook with 500GB Western Digital HDD and this worked great.

  • I bought a cd and downloaded it to my itunes account. I want to burn it to keep one in my car but I dont get that option. how can i burn it from my itunes account?

    I bought a cd and downloaded it to my itunes account.  I want to burn one to keep in my car, but dont get that option. how can i burn it from my itunes account?

    Hello lindsey0315,
    I read your post, and I have linked to an article that will instruct you on how to create CDs with iTunes:
    iTunes 11 for Windows: Create your own CDs and DVDs
    http://support.apple.com/kb/PH12348
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How can I burn a movie to dvd when I don't have iDVD on the new macbook pro?

    I have recently purchased a macbook pro and I have made a movie in iMovie, however i don't have iDVD as it no longer comes on macs so how can I burn this movie to DVD without this program? Is there a program already on my laptop or do I need to purchase one and if so what can I purchase?

    ToastTitanium from roxio
    http://www.roxio.com/enu/products/toast/titanium/overview.html?ClickID=dxsztmmzk 0ookbzn2brmtsr2hcomcnhysxrs

  • How can I burn more than 1 movie to a DVD when there is room on the disc for it. Premiere wants to overwrite once 1 movie is burned to the disc

    How can I burn more than 1 movie onto a DVD? Once 1 movie is burned successfully to the disc, I try to burn another movie and Premiere wants to overwrite the first movie. One movie is 1.2 GB, second is 2.3; so there is room on a 4.7 GB DVD-RW.

    susang
    What you report is what it is.
    Each burn to of Timeline content to DVD-VIDEO format on DVD disc results in the disc containing one OpenDVD Folder and one VIDEO_TS Folder.
    Only one VIDEO_TS Folder can be put on a DVD-VIDEO disc even when Premiere Elements is not involved. I have seen that written about online, and I have
    never found a way to overcome what seems to be basic behavior description of DVD-VIDEO..
    Premiere Elements will allow you to write to a disc with content already on it, but only after you give the OK for erasing the disc content before going ahead
    with the burn to.
    If you have several movies, one possibility is to build a Timeline with the movies, use stop markers, and setup disc menus according so that the viewer
    can selectively watch the movies. More on that later if wanted.
    Any questions or need clarification, please ask.
    Thank you.
    ATR

  • How can I burn just a few photos to a cd using Photoshop Elements 11 on a windows 7 computer?

    As a fairly new user of Photoshop Elements 11 I would like to burn just a few photos to a cd, not he whole catalogue. Please can somebody suggest an answer to this problem.

    Thanks for your help, much appreciated.
    Original message----
    From : [email protected]
    Date : 15/09/2014 - 14:21 (GMTST)
    To : [email protected]
    Subject :  How can I burn just a few photos to a cd using Photoshop Elements 11 on a windows 7 computer?
        How can I burn just a few photos to a cd using Photoshop Elements 11 on a windows 7 computer?
        created by 99jon in Photoshop Elements - View the full discussion
    File >> Export As New
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6730807#6730807
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion os. I did purchase Wondershare for burning but it will not load the iMovie events or projects

    How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion OS. I did purchase Wondershare for burning but it will not load the iMovie events or projects

    There is no proper substitute for iDVD.
    Why is there no iDVD on my new Mac?
    https://discussions.apple.com/docs/DOC-3673
    UPDATE & ADDENDUM:
    But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
    Poster jhb21939 posted this in another thread:
    “when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
    I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
    In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
    In response, Old Toad posted this solution:
    “You can still use it one all of your Macs.  If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer.  After you're done reset the time back to the correct time.” He added this comment:
    “It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
    I've been able to use the installer even without setting back the date.  I just clicked on the Continue button and it would work as expected.  For some it would not continue unless the date was set back.”
    The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
    Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

  • How can I burn a CD or DVD for regular data files?

    How can I burn a CD or DVD for regular data files using anything other than itunes?

    If you need simple burning, do as Robert said. However, if you need more advanced options, take a look at Roxio Toast 10 Titanium. There is also a Pro HD version if you need more video burning options.

  • How can I burn a disk of photos with a modified file name?

    After importing photos from scan device, I use Photos > Batch > Change to rename files.  When burning a disk the changed file names do not transfer with the image but use the original file name.  How can I burn a disk of photos with the modified file name?
    This is what I have done so far with no success.
    Drag selected photos from Event to Burn Folder where the file names were changed. Burn folder lists file with original file name.
    Drag albums to Burn Folder with the same result.
    In Filer I am able to change the iPhoto Library > Master > Date > Filename and then drag to burn disk folder and see the changed name but this is a single file exercise without a view of the file's image, but to use the new file name in iPhoto events I have to repeat the naming convention.

    File > Export.
    In the resulting dialogue note the "Name" section. Choose to use the Title as Filename.
    Regards
    TD

  • I have photos in Adobe Photoshop Album Starter edition 3.0. How can I burn these to a CD?

    I have photos in Adobe Photoshop Album Edition 3.0.  How can I burn these to a CD?

    Numerous programs can do this, including stuff that came with computer.

  • How can I burn CDs that will play on my car stereo CD player?

    How can I burn CDs that will play on my car stereo CD player?

    Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place.  Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

Maybe you are looking for