Re: Equium L350-10L - first start with battery power supply

I have just bought an Equium L350-10L. When it arrived it was powered up using the battery and the Windows installation began. However the battery expired and I cannot get past the "unexpected shut down" message even after rebooting.
How can I get back to square one and restart the installation process? Advice.

Oh buddy, so silly idea. I really can not understand you. After weeks or maybe months in the box, it is logic that battery can not run with full capacity.
Anyway, connect your notebook to AC power supply and leave it for a while. Start notebook again to see what will happen. If the setup procedure can not be finished start notebook again and press F8 immediately. Chose first option Repair my Computer and follow the menu on the screen. The OS will be installed again and you will be able to finish OS setup procedure.

Similar Messages

  • Satellite 2450-201 wont start with battery power supply

    Can anyone please help, I cannot power up through the battery at all. When connecting the AC supply, the laptop powers up no problem. And after the intitial power up, I can switch to the battery without any problem. But it won't let me power up through the battery at all.
    Can anyone advice, is there any settings that will help or do I need a new battery?

    Hi
    How about the battery charging status?
    Is the battery fully charged?
    Try to disconnect the AC adaptor and remove the battery from the notebook for a several time (15-30min) then plug the battery again and try to power up the notebook.
    I think also you should check if the issue happens also with the new power pack. Possibly there is something wrong with the battery and you need a new one.
    Sorry for such general suggestions but you know, we can only speculate about the issues.

  • Downgrading Vista to XP on Equium L350-10L

    Hey guys this is my first post on here. I have searched everywhere but cant seem to find the information or get the help i want.
    Heres the question. I have the *Toshiba L350-10L Equium. (PSLB2E)*, I bought it last week and I really hate the Vista that comes with the machine. I also have XP Pro and I wish to put this on the machine instead of using the pre-installed Vista.
    Problem is I cant find any XP drivers available here to use once I put XP onto the machine.
    Does anybody know if they are available and if so where can I get them?
    Additionally is it possible to use the vista drivers on XP or will they not function. I do not want to try installing XP until I have all the correct drivers. I have tried to find this info everywhere and to no avail. Surely the demand for XP should make toshibe release the drivers. I see other people asking the same questions but for different machines and am wondering are they available for my specific machine.
    Any help into this guys would be greatly appreciated, or even any advice towards if Im barking up an impossibly wrong tree.
    Thanks again in advance folks

    Hello all,
    I have the same notebook and unfortunately did not check for drivers before to downgrade to XP.
    As a result of that I have got LAN, Wi-Fi, SOUND, camera and may be some more devices not working at all now.
    It will be very useful for me if some of you could show me where to check about my exact configuration of the notebook.
    I need to find the model type, number and manufacturer of the hardware devices assembled into Equium L350-10L (PSL D2E)
    Using that info I can check for drivers at manufacturers home pages.
    Any advices referring to that problem are welcome.
    Thank you in advance for them!

  • NO power on my MacbookPro: it all started with Battery of my MacBook Pro saying it was not charging (even if the pro was plugged) and it then switched off and now wont turn back on. There is no light on the magsafe and no startup noises at all.

    NO power on my MacbookPro: it all started with Battery of my MacBook Pro saying it was not charging (even if the pro was plugged) and it then switched off and now wont turn back on. There is no light on the magsafe and no startup noises at all.

    If you have Apple Care or your computer is still under warranty, give them a call and get a case number.  Otherwise, take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS

    Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS?

    Take each of these steps as needed, and check to make sure it hasn't been fixed with a reboot afterwards before trying the next step.
    Backup your data if you haven't already:
    https://discussions.apple.com/docs/DOC-1992
    If you use Airplay, see https://discussions.apple.com/docs/DOC-6831
    If you don't use Airplay, be sure to upgrade to 10.9.2, using this update:
    http://support.apple.com/kb/DL1726
    Make sure your hard drive is not over 85% full.
    Make sure Spotlight is not indexing.
    Make sure Time Machine is not running when you do other tasks.
    Check to make sure you have not accidently/purposefully installed MacKeeper, as it will slow down your Mac:
    https://discussions.apple.com/docs/DOC-3036
    Remove any other system cache cleaning applications.
    Reset the SMC:
    http://support.apple.com/kb/ht3964
    Reset the PRAM:
    http://support.apple.com/kb/ht1379
    Check to make sure there aren't any signs the power adapter might be damaged, or the wrong one*:
    http://www.macmaps.com/frayguide.html
    If there are still issues, you may need to replace the battery:
    https://www.apple.com/batteries/replacements.html

  • Mac Book Pro will not start on Battery Power

    Mac Book Pro will not start on Battery Power although battery at 98% need to connect charger. When started date and time incorrect, comes up as 1st Jan 2012.

    What is the exact model of your MBP?  The date change often is an indication of power loss to the MBP, such as disconnecting the battery.
    If the SMC reset does not solve the situation, post this from your MBP:
    Make certain that the power adapter is connected.
    Ciao.

  • HT3964 macbook pro will not start on battery power works fine when plugged in

    My macbook pro 15 inch early 2008 model will not start on battery power but works fine when plugged in.

    check the battery info.. >about this mac>more info>system report and select "power" on the lefthand column.  How many cycles? What does it say about the condition? etc.

  • HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

    Hi,
    Any one have this issue?
    HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
    This issue was found in my replacement motherboard. the original mother do not have this issue.
    The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
    Appreciate any one can provide clue for resolving the problem.
    I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50) 

    @wheng 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

    I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

    If the charging plug fits, use it.

  • Under battery power supply Tecra A7 works slowly

    I have a notebook TECRA A7, and I have some problem with the battery. When I don't use alimentation AC, the notebook gets too slowly with programs like Netbeans.
    How can I solve this problem?

    Hello
    To save battery power and allow longer notebook usage Toshiba has designed Toshiba power saver tool. As you can see there are few different power profile available. If you use battery power supply it will be automatically switch to Normal profile and there is CPU speed set to lower level. You can change it manually and set to maximum performance.
    NetBeans software is not known to me but it is possible that notebook runs slowly if software needs more CPU power.

  • IMac went totally black. No power to the unit. Have there been issues with the power supply?

    My iMac went totally went black tonight when my grandchildren were using the iMac. I can't power it up? Have there been issues with the power supply?

    It may just be the power cord (between the mains and the computer).   If you have an Apple store or Authorised store near you, take the cord in and check it out.  Indeed, check if it has been partly pulled out by pressing it firmly into the back of the computer.

  • Help for beginner: Need labview signal to power on =2 actuators of 8 with one power supply

    I am a beginner in using labview. I need to use labview signal to turn on >=2 ac 8 actuators with one power supply. The 24VDC, 0-3A power supply is enough to drive all 8 actuators which need 24VDC and 0.1A current. So the main function is like turning on 2 or more than 2 switches in series with the 8 actuators with one power supply. Any suggestion of some simple module for this purpose? Thanks.

    Maybe I didn't say the question clear. I have one power supply (24VDC, 0-3A) and 8 solenoid valves (24VDC and 0.1A). Two valves (or more than two in future) have to be activated each time. I would like to find something that can work like switches installed in series with the valves. Then I can wire the valves (with the switches) in parallel with the power supply. As I turn the switches on and off with signals from Labview board, power to that specific valve will be turned on and off.
    Any advice for this kind of switches or any module that can be controlled by Labview signal? Please help! Thanks.

  • Satellite C660 - WLAN disconnects on battery power supply

    HI
    I have a new Satellite C660 which is a great wee machine BUT every time I disconnect the power cable the wireless connection looses the internet connection. Wireless is fine and all settings accurate. I have checked the amended the power settings and they are set to be ok whether on battery or power.
    But still I cannot disconnect the power cable without losing the warless connection. The modem is still on and functioning and even more strongly I can access other peoples wireless connections whilst being off line.
    Please any ideas?
    Thanks

    When you use notebook on battery power supply and use FN+F8 can you enable and disable WLAN module properly?
    Ave you checked WLAN settings in device manager properties (click here )?

  • Equium L350-10L - WXP installation without USB Floppy Drive

    Hi Guys,
    Recently purchased a L350-10L and I'd like to upgrade to Windows XP from Vista. ;-)
    I'm aware I need the Intel Matrix Storage Manager drivers loaded during the XP installation but I don't have a USB Floppy Drive. I've tried using USB key but with little success. Is there any way to do this without a USB FDD or have I gotta bite the bullet?
    Many thanks for your time,
    Leon Rice
    [email protected]

    I agree with kody. On this forum you can find fantastic threads with precise description how to use nLite software for WXP installation. Just use Advanced search option.

  • SatelliteU300 Won't start with AC power connected and fully charged battery

    I just bought a U300-13U. It works great when battery is charging and AC is connected. However if left to charge up fully it won't start with AC connected. Unpluging the power or removing the battery and running on AC makes it work fine. Is this a 'feature' to stop overcharging or overheating the battery, or just a problem with this machine. I want to run with AC and battery both connected all the time as I have done with all my other laptops.
    Any help appreciated.

    Hello Andy
    Friend of mine has this small U300 and everything work well. I have had it few weeks ago to test WXp installation and it works perfectly.
    Please test it again very carefully and if the same happen again I recommend you to contact Authorized service partner in your country. Let them check your notebook. I must be honest and say that described issue sounds strange to me and please do not wait too long. Contact service as soon as possible.
    Bye and good luck!

Maybe you are looking for

  • Kde 4 crashes on intel 865G graphics

    i installed kde 4.2 rc. i go to system settings and enable effects. as i hit apply kde / x crash and i am on the terminal hardware [ash@viridian ~]$ lspci 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)

  • Sapscript: display in main window table ... repeat table haeder on new page

    Hi all, I have a form with one Window -> Main Window, in this Window it will be written many different information... there is also a table, when the table cause a new-page, the header (discription of the table) should be written (repeated) also on t

  • Question about decimal places for currencies

    hi ,experts ,    here is the problem , when i use mb5s, i found the net price has been enlarged 1000 times . I  also found the data of the table EKPO has been enlarged 1000 times. So ,i check the decimal places for currencies , i found there are five

  • Unable to run oracle 10g developer suite

    Hi, I have installed both on oracle 10g express and oracle 10g developer suite on my laptop running XP home edition. The database is running , but I can not get form developer to run. The error message as "ORA-12154-TNS:could not resolve service name

  • Can you export topics to Excel?

    Is it possible to export topics from from RoboHelp 10 to Excel 2007?  If so, how? Thanks!