Re: Equium L40-14l - System recovery option missing

Hi All
I have a Equium l40 14l that I've finally decided needs to be restored to " out of the box " status.
I can boot to the system recovery option page but the widely mentioned HDD recovery option has been replaced by Restoring the Complete Windows Operating System option.
When I select that all it does is tell me that if preinstalled files are damaged you can use the product recovery dvd-rom. All I can do is click OK and return to the previous screen.
I've run some partitioning software and the hidden partition shows up there. I didn't get a recovery disc with the machine as it had the hidden restore partition.
I didn't make a back up when I first booted the machine. I'm thinking now that it would have been a good idea but as I thought I had the hidden partition to rely on I didn't bother.
Any ideas if there's a way I can get the system recovery to show the option for HDD recovery?
Thanks in advance Tom

Guess what I found?
A product recovery disc. I've re-installed and am now in the process of removing all the junk that comes with it.
Happy days :-)
Cheers Tom

Similar Messages

I can't accessed system recovery options after the repairing process was interrupted.

although it's not my PC, i'm still concern about it (it's actually a public computer in our library). I actually tried to repair it using the system recovery options of windows 7 with thinkvantage technoliogies but i interrupt it because maybe someone will caught me and i will be mistakenly be liable. and the result is after i restared it, it restarts over and over again, with BSOD appearing for a split second. i tried to use disable autorestart on system failure feature, and i saw the BSOD. but the real issue is i can't go through the recovery options, only until the part when i'm asked to select a keyboard input method, then the next part is this message: "You must log in to access System Recovery Options. If you are having trouble logging in, please contact your computer administrator for assistance. Click OK to restart the computer." anyway, this is the BSOD says:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical in formation:
*** STOP: 0x00000024 (0x00000000001904, 0xFFFFFA800690D840, 0XFFFFFFFFC0000102, 0x0000000000000000)
I hope this problem will be solved as much as possible. thank you in advance. and i also don't know what model of this Lenovo all-in-one PC is. but i think this is 3318F9U, and its i forgot its BIOS version, and i don't know how to access it. and also, i'm not sure if there's a preloaded Superfish in this all-in-one PC, maybe the vulnerability started it. because i recently read an article regarding the Superfish's vulnerability.

Hello and welcome,
Please remeber that this is a peer-to-peer forum (users helping each other) not the Lenovo support site. There is some Lenovo presence, but if you need urgent support, please try your local support office:
Philippines
THINK-branded products
Tagalog, English
1-800-8908-6454 (GLOBE subscribers), 1-800-1441-0719 (PLDT subscribers)
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Satellite L755-S524 won't run safe mode or system recovery options

I am trying to startup my PC in Safe mode and I get the screen that says Startup repair and it jsut sits with the blue bar scrolling across and below it says "attempting repairs" It's been sittign like that over an hour..

Satellite L755-S5242
If you haven't burned a Windows 7 System Repair disc, download one by scrolling down to the link Windows 7 System Repair Disc 64-bit here.
Create a Windows 7 System Repair Disc
Then try a Startup Repair and a System Restore from the Windows Recovery Environment.
What are the system recovery options in Windows 7?
Let us know how it goes.
-Jerry

ThinkPad Edge unable to use System Recovery Options

I am helping a friend with a laptop problem. The HDD has had problems in the past and already been restored once. Now it won't boot and I'm unable to access the f8 boot options in order to use Safe Mode. I was able to boot using Kaspersky, but it doesn't show the whole HDD and files.
I've given up trying to access files and just want to try to get the PC working again. I tried using the System Recovery Options and doing a restore, but after it launches I get a message that says "You must log in in order to access System Recovery Options."
Any suggestions? Thanks!

Good day and welcome to the community.
It may help others provide advice with a bit more information about the system you're working on. TP Edge model, windows version, etc.
Cheers.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

System recovery options loop

This morning my wife's Satellite 100 running Windows Vista got itself into a System Recovery loop with absolutely no discernible way of getting out of it. So I'm turning to you guys to see if any one has had the same problem.
First the system shut down (battery problem). She restarted it and on loading Vista got a message box with the heading "System Recovery Options", just an OK button and the message "This program cannot be loaded click OK to restart" or something to that effect. Doing anything switches the machine off.
I tried F8 on start up and all the options in the recovery menu (including the Repair System tools) restart Vista and arrive at the same message.
I've searched Toshiba's support site and found nothing.
I have a recovery disk but that would reformat the hard disk and she has lots of stuff not backed up.
I suspect that it is going into Recovery Mode and finding a disk error on the "hidden partition". So I just want to stop it doing that so that I can start the machine and backup the files. Any ideas?

Hi buddy,
Can you start Windows in safe mode?
I think in worst case its necessary to reinstall Windows if it doesnt start anymore. I mean there is nothing what you can do
Im wondering that you didnt make a backup of these important files Anyway, you can backup them if you put the HDD in an external HDD case. Then you can connect it to another computer and make a backup before reinstalling Windows.

System Recovery Options in Windows 7 (MBP and Parallels)

I realize it is probably debatable (perhaps at best) if this belongs here but I have borked my Windows 7 installation on my MacBookPro running Snow Leopard and I now see this after opening Parallels and either starting or shutting down the virtual machine:
http://dl.dropbox.com/u/15285654/Screen%20shot%202011-11-25%20at%2011.13.16%20AM .png
I am trying to follow some system recovery recommendations and I can't quite figure out if I need to hold down "Fn + F8" upon a Restart of the Virtual Machine - or if I should put the install Disk in and then somehow /boot/ to the CD Rom or what:
http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options -in-Windows-7
If anyone has any advice I'd love to fix this problem without a full re-install of Win 7.
Thanks.

Thanks - but I can't seem to install it! Even in compatibility mode. I get an error box telling me to check nothing else is running (...), and a message saying it has encountered error code -6003.
Could this have something to do with me running Windows 7 x64?
Thank you...

Recovery Partition and F11 recovery option missing

Hi All,
I have reset by T430 from the USB recovery(Windows 8) which i have created earlier. My recovery was successful, but the recovery partion was missing in the notebook harddisk and F11 recovery option was missing in the startup menu after recovery.Please suggest me, how to restrore the recovery partion.

Hi All,
I have reset by T430 from the USB recovery(Windows 8) which i have created earlier. My recovery was successful, but the recovery partion was missing in the notebook harddisk and F11 recovery option was missing in the startup menu after recovery.Please suggest me, how to restrore the recovery partion.

Windows Server 2008 R2 System Recovery Options - No disks!

Hi,
I have a Windows Server 2008 R2 VM running on CITRIX XenCentre v5.6 SP2.
The XenCentre host is a HP ProLiant DL 580 G7.
The VM's C:/ is hosted on a SAN which is controlled by DataCore SANSymphony-V PSP2.
I need to perform some work to resolve an underlying issue with the 2008 VM which requires me to perform a 'System Recovery'. When I do this however I am presented with the attached screen shot which lists no drives to repair.
Looks like 'Load Drivers' is the way to go but what drivers am I supposed to load? Xen drivers? DataCore drivers? Generic drivers? anyone know?
This topic first appeared in the Spiceworks Community

Hi,
You mentioned that “The System Writer is not showing up when I view vssadmin list writers.”
you may reboot the related services or re-register the writers, please refer to:
How to Re-register Volume Shadow Copy Service (VSS) Components on Windows 2008/Windows 2003.
http://www.symantec.com/business/support/index?page=content&id=TECH70486
Best regards,
Jeff Ren
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

My Pavilion Dv7 Laptop wont start up the system recovery options

So i was told to turn off my laptop, then turn it back on whilist holding onto the F11 key. But when i do this my laptop makes loud beeping noises and stays on the hp logo, whilist it is on this screen is says 'System Recovery F11' on the left bottom corner and doesnt move from this screen, how do i fix this?
This question was solved.
View Solution.

Hi @Jaytee2 ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and getting a blank or black screen on startup. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Here is a link to computer won't start for Windows 7.
Here is a document on performing a system recovery on Windows 7.
Do you have the System disks for this Notebook?
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Recovery option missing from ThinkVantage boot menu

On my x220 I installed an mSATA hard drive in addition to the built-in disk. I re-installed Windows 7 and all of the Lenovo utilities onto the mSATA drive, then deleted the 100mb system and primary Windows partition from the spinning disk. I did not touch the RnR partition.
Now when I press the blue ThinkVantage button during start-up, recovery is not one of my choices. I cannot get into the recovery partition. What steps are necessary to re-enable this feature?
Thank you. Screenshots below show the in-tact recovery partition, and my menu of choices when I press the ThinkVantage button
Link to picture
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Did you install the mSATA using recovery discs from Lenovo or make a clean install?
As the F11 is the only option which is missing, and the only option which is not a direct BIOS command and must be in the Master Boot Record, my guess is that your BIOS / MBR don't know that it should show the message or even know that the recovery partition exists.
How you sort that all out is unknown to me, not one of my skills. Maybe install the mSATA from recovery discs which would then also locate the recovery partition also on the mSATA or somehow edit the MBR which I definitely don't know how to do???
edit; grammar
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Equium L40-14L - Wont boot up

My laptop crashed and now wont boot up just comes up with disc read error.
I have tried the recovery disc but this goes as far as choosing the language then seems to crash again any thoughts as to what the problem is?

Hi buddy,
You wrote that your notebook crashed but what happened exactly? Did you get a BSOD or did it shut down immediately?
At the moment I assume your HDD is maybe faulty because you got a disk read error and you can install Windows from the Toshiba recovery disk.
Have you checked the HDD with a diagnostic tool like Drive Fitness Test?

ThinkVantage Button takes me to System Recovery after HDD partition

Hello,
I recently purchased a W520 with 4GB of RAM.
I bought 3 more sticks of 4GB each, installed them and everything was fine. I also shrunk the C: drive and created a new drive (D:\) from the space I saved after shrinking the volume.
When I start the laptop and want to go into the BIOS setup by pressing the blue ThinkVantage button, it does not go to the BIOS setup. Rather it goes through to the system recovery options.
What gives? How do I go to the BIOS setup?
Thank you in advance.
Solved!
Go to Solution.

Yep. that worked... Silly me. Thanks

How do you Stop Booting to System Recovery

I have a ThinkeCentre that boots to System Recovery Options. The hard drive was full and I cleared space and ran repairs. If I hit Enter on the BIOS splash screen I get the boot menu and hit F11 then the system boots the OS (Windows 7) and works fine.
My question is how do I stop the system from automatically booting into the System Restore Options and Boot the OS instead? Is there a flag that I can reset or something?
Thanks,
-Nathan

In Lion, you use the same keystroke to start and stop text-to-speech. By default it is set as Option-Esc, but can be changed in the Speech prefs pane in System Preferences. The behavior in Snow Leopard should be similar.
Edit - - Just confirmed via booting into 10.6.8 that the behavior in Snow Leopard is the same. Exception - there is no default setting for the start/stop keystroke, so one must entered in System Preferences > Speech > Text to Speech.

HP mini 110 System Recovey Options

I have the HP mini 110 i am trying to recover windows 7 it comes to a screen saying:
System Recovery Options
To access recovery options, log on as a local user
To access the command prompt as well, log on using administrator account,
User name: HomeGroupUser$
Passwrod:
OK Cancel
what is the password?

Hi,
Very intresting code but please try:
30743389
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP system recovery selection problem

I installed windows 8 on my HP Envy Spectre XT and now i want to roll back to windows 7 that came with my device. I dont have any recovery discs and HP does not provide one. I have the recovery partition still there and I can boot into it, but I cannot select the option for System recovery and Minimised Recovery. All i can select is the windows based recovery.
Others seems to be disabled. Please provide me with a solution to enable the System Recovery option.

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers that are all different. Without this information it may be difficult or impossible to assist you in resolving your issue.
When you first setup your computer, you were given many opportunities to create your own personal set of HP Recovery Discs as recommended by HP. If you failed to create these discs and installed a new operating system on your computer, you may not be able to use the recovery partition . Since you cannot select the "System" or "Minimised" recovery options, I would guess that some needed information is no longer available for the recovery partition to work correctly. The only way to recover your computer while in this state, would be to use a set of HP Recovery Discs.
Please send KUDOS
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Re: Equium L40-14l - System recovery option missing

Similar Messages

Maybe you are looking for