Re: Equium M Series died when put into normal mode

Hi,
Laptop was working fine last night until I put it into normal mode. Since then (and it may be unrelated) when I press the on switch the fan starts with the initial burst, the hard drive whirs and the lights come on but the screen stays blank and then nothing else happens. It doesn't even boot to bios or the logo screen.
The hard drive is fine having tested on another machine, it just seems to be the actual laptop. Any ideas to save a new laptop having to be purchased?
Thanks

Hi,
> but the screen stays blank and then nothing else happens. It doesn't even boot to bios or the logo screen.
The possible reasons are a graphic card or internal display malfunction. Connect the external monitor to check, if you can see anything it means internal display malfunction. Otherwise, it's a graphic card related issue.

Similar Messages

MacBook Pro shuts down when put into sleep mode

Every time I put my Mac into sleep mode (plugged in or not, charged or not), it shuts itself down, and I have to restart it. I just got it (brand new) in August, so I know the battery shouldn't be bad.
It's been doing this for about a week... I just changed to Snow Leopard yesterday, and downloaded the software updates and everything, but it still shuts down.
Anyone know what I can do (short of sending it to Apple) to fix this?

Okay, well I already used smartsleep.
It fixed the problem I was having, but now my macbook started having the same issues again this weekend. It's happened twice tonight in the span of 3 hours.
Do I need to uninstall SmartSleep then?
And here is the report I get when the macbook reboots:
Interval Since Last Panic Report: 4800 sec
Panics Since Last Report: 1
Anonymous UUID: 47604936-AB69-4BB8-A247-0865F4F970CA
Mon Oct 5 22:23:12 2009
panic(cpu 1 caller 0x9c6824): NVRM[0/2:0:0]: Read Error 0x00000004: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xe4000000 0x58dd7000 0x096380c1, D3, P1/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x58723668 : 0x21acfa (0x5ce650 0x5872369c 0x223156 0x0)
0x587236b8 : 0x9c6824 (0xba092c 0xc01d20 0xbabbf0 0x0)
0x58723758 : 0x15272ba (0x8d59804 0x8adf004 0x4 0xf02e11)
0x58723798 : 0x1529d8b (0x8adf004 0x4 0x587237d8 0xab3666)
0x587237d8 : 0x152a81c (0x8adf004 0x8566804 0x1 0x0)
0x58723868 : 0x15291ff (0x8adf004 0x5c14 0x1 0x43e3e004)
0x58723888 : 0x9c842c (0x8adf004 0x3e 0x0 0x0)
0x58723928 : 0x9cc583 (0xc1d00031 0x2000000 0x41 0x2)
0x58723a88 : 0x9cd55f (0x0 0x600d600d 0x703a 0x58723ab8)
0x58723b58 : 0xb99647 (0xc1d00031 0x2000000 0x41 0x2)
0x58723ba8 : 0xb8edfa (0x58723d54 0x0 0x58723bf8 0x1af015)
0x58723cb8 : 0x9725a4 (0x43f23000 0x1 0x58723d6a 0x84)
0x58723d18 : 0x967904 (0x88f2c00 0x1 0x58723d6a 0x84)
0x58723db8 : 0x967c6d (0x88f2c00 0x2 0x58723de8 0x4fba02)
0x58723e28 : 0x967c27 (0x88f2c00 0x706f7772 0x2 0x12610b0)
0x58723e98 : 0x95658d (0x88f2c00 0x70777273 0x2 0x225f21)
0x58723f38 : 0x956675 (0x88f2c00 0x0 0x58723f78 0x53c71c)
0x58723f78 : 0x22f3e5 (0x0 0x0 0x58723fc8 0x2270aa)
0x58723fc8 : 0x29c68c (0x863ec0 0x0 0x29c69b 0x8a58000)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.2)@0x1422000->0x1894fff
dependency: com.apple.NVDAResman(6.0.2)@0x96f000
com.apple.NVDAResman(6.0.2)@0x96f000->0xc02fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
com.apple.iokit.IONDRVSupport(2.0)@0x961000->0x96efff
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
com.apple.iokit.IOGraphicsFamily(2.0)@0x943000->0x960fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
BSD process name corresponding to current thread: kernel_task
Message was edited by: onlyalullaby

Shuts down when put into sleep mode

Any idea why this is happening?
When my ipod touch locks itself or if I put it into sleep mode, it will not wake itself up with the press of a button - instead, it restarts (black screen with apple logo in centre).
It is only 12 hours old and was perfectly fine when running on the factory 1.xx software, it has only started happening since the 2.1 software was installed.
Since, I have Restored it through iTunes which performs another clean install of 2.1 and it is the same still
Weirdly, while it is connected to my PC through the USB cable, it behaves perfectly (waking up from sleep instantly with the press of the home button), but as soon as I disconnect it from the PC, it starts playing up again.
If I set the settings to never lock, it performs brilliantly which is annoying as I now have a taste of what this device can do, but I just cant put it into sleep mode.
Any ideas on what I need to do? Or is it a case of returning it to Apple?
Thanks for any response
Message was edited by: Agent-Trig

Is the battery FULLY charged? If not, charge it and then see how it reacts...make sure Wi-Fi is off while you do this--I've noticed weird things when it's docked and plugged into my TV (with the new dock) and wi-fi is on--I get battery messages randomly and it eventually shuts down (even though it's plugged into a dock with power, that came from Apple and is the "latest and greatest"...)

TS1538 my ipods appears under my computer when put into disc mode but not in itunes, i synced it yesterday but now it wont sync

my ipod appears under my computer when in disc mode, synced it yester but not today

"my dad pressed view and then he chose the 3rd picture thing and songs went into."
Sorry, I don't know what that means.
Have you had a chance to look through these?
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.

Equium A110-276 not able to shut down or put into hibernate mode

With the ac mains adaptor connected to laptop, I am unable to shutdown or put into hibernate mode. When shutting down or going into hibernate, the computer appears to do everything correctly until the power is shut off. When power is shut down there is a two second delay after which the computer re-boots again. This problem does not occur with the ac mains adaptor removed from computer (battery only).
Problem started after my husband inadvertantly connected mains adaptor whilst computer was booting up. Have looked at BIOS settings and all ok; have looked at power settings in Control Panel and all looks ok.
Can anyone please help???

Hi
As far as I know the Toshiba Power saver controls the going into standby and the hibernation mode.
You should firstly remove your power saver and then after clean removing and after new rebooting you should install the version from the Toshiba driver page.
If this will not solve the problem you should try to update the BIOS. But be careful. Be sure that you use the right BIOS and the right BIOS update procedure!

Videos are often stretched when put into imovie. How can I change them back?

Videos are often stretched when put into imovie. Help!

Hi
If I understands it right.
You can not. iMovie'13 (v.10) are 16x9 ONLY.
You need a previous version of iMovie - OR - FinalCut Pro-X
Yours (Guessing) Bengt W

Equium L350D with Vista wont go into sleep mode

Equium L350D with Vista wont go into sleep mode i just reinstalled windows and sleep was working but now the screen just goes off but its clearly not on standbye
please help

>i figured it out
Can you please tell us how?

G5 dual 2ghz. Been unplugged for a while. Powers up but no video or power to usb keyboard. Boots up fine in safe mode, restart into normal mode ok. After shutdown, back to same issue. What's happening?

G5 dual 2ghz. Been unplugged for a while. Powers up but no video or power to usb keyboard. Boots up fine in safe mode, restart into normal mode ok. After shutdown, back to same issue. What's happening?

I keep seeing people ask and the advice to replace if it has been unplugged, but really have nothing to confirm that from my experiences.
My experience is that a weak or dead battery can cause much more than date and time issues.
I have seen it time and time again.
Deal with used machines and you will quickly learn....
I'll give no "recipe" or set list of symptoms, but the range of irregularities that can occur make it a quick and easy first line of troubleshooting, especially when the machine has been off the mains for a few months.
Why fight mysterious maladies and troubleshoot with the knowledge that the PRAM battery is beyond it's useful life.
Maybe they recharge?
Not likely. They are chemically nasty, disposable, one way discharge batteries.
They aren't Lithium-ion batteries

My new I phone 4s does not ring when someone calls. Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!

Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!

Try a different ringtone.
Reset or restart the device.

Delay of Message in the Adapter Engine when put into queue

Hi XI/PI Experts,
We are having problems in the Adapter Engine wherein messages are staying longer in the AE queue as usual. Sometimes, it stays longer in Delivering status also. Is there any way we can monitor and try to push the message out of AE to avoid delays? I know we can do this in the ABAP side (Integration Engine)...but how can we do this in the Adapter Engine?
See below sample logs in AE RWB:
2008-07-17 13:28:13 Success Using connection SOAP*****. Trying to put the message into the receive queue.
2008-07-17 13:28:13 Success Message successfully put into the queue.
2008-07-17 13:34:12 Success The message was successfully retrieved from the receive queue.
2008-07-17 13:34:12 Success The message status set to DLNG.
As you can see there is a gap of 4 minutes.
Hope you can help me. Thank you so much in advance.
Grace

Hi.
Thanks for your answers but the messages are not set into EOIO but just EO. So the messages are not ending up in Holding Status.
I also believe that issue is not occurring because of too many messages in error in AE nor because of the receiving system is down. Issue is happening when message is about to be sent to the SOAP communication channel in AE. As you can see in the sample log I provided above, in RWB AE, after the message was put into queue, it took several minutes to be delivered to corresponding comm channel. My questions are:
1. Is there a way we can monitor the queue in AE like the way we monitor the queue in IE? (e.g. smq1 and smq2 transactions) .
2. If there is a way, how are we going to intervene manually on the queues in AE? (we can intervene with smq1 and smq2 in IE)
3. For messages with Delivering Status in AE, sometimes it is taking hours to move to "Successful/Delivered" Status. Is there a way we can intervene with that? I believe we can resend messages with "System Error" Status and Staus "To be Delivered" but for status "Delivering"...it is not possible (from what I know -- I hope there is a way).
I look forward to hearing from you guys/gals.
Grace

Should Apple TV be put into standby mode when not in use?

Anyone,
When I am done watching Apple TV, should I put it into standby mode or leave it on? Just want to take of my new favorite toy!!!!

I tend to leave them on all the time - standby mode isn't particularly low power as lots of things are still active.

Sad icon = computer does not detect = cannot put into disc mode !

hey,
my ipod photo at the moment won't turn on. the best i can do is plug it in to either my pc or the electricity supply, or reset it, so the apple logo comes up, however it only lasts for a few seconds and the sad face icon appears, directing you to www.apple.com/support.
i tried the first 4 r's and got onto the restoring one. but the updater will not detect the ipod. i think it is because my ipod is not in disc mode, but i cannot put it into disc mode - i can do the first step and resetting it, but then when i click the play/pause button and the select button nothing happens.
this problem has severly cheesed me off, and am very desperate to have a working ipod again!!!! please please help if you can!!!!
thanks a lot, leon

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

HT6058 iPhone put into Recovery Mode after updating to 7.0.4, and now iTunes can't restore it from my computer. What do I do?

Once my iPhone 4 updated the iOS to 7.0.4, it immediately went into Recovery Mode, with the iTunes symbol. I plugged it into my computer, and it says I need to restore the iPhone. I click Restore, but in says it can't connect because of my network connection. I've followed every troubleshooting issue from the support section related that issue, but it STILL won't connect and download the recovery.
What do I do to get my iPhone fixed? And why did 7.0.4 cause this?

Don't worry about that. iPhone stuck in recovery mode always happens when you update the iOS on your iPhone. There are two ways to solve it.
First is is to put your iPhone in DFU mode.
Step 1. Turn off iPhone
Step 2. Hold down the Power and Home button.
Step 3. When you see the Apple logo, release the power button but continue holding the Home button down.
Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.
If DFU mode can't solve the problem, I'm afraid the only solution is to try some 3rd party software, like iPhone data recovery or something like that. You may simply try the tutorial here: How to Fix iPhone that is Stuck in Recovery Mode.

"Bad" colors/banding when going into Edit mode with Canon RAW files

Just got my iLife '06 suite yesterday and ran into something very disturbing: something wrongwith the colors of RAW files once you go into editing mode. In the library view, they're fine. Try to edit one, and after a few seconds, there's a final refresh of the image window that heavily alters and bands the colors. (Looks almost like a poor conversion down to 256 colors or less - it's that bad).
This is happening on Canon 300D and 20D raw files, and did NOT happen with iPhoto 5. The RAW files open up and display just fine in Preview (as well as 3rd party apps) - problem is in iPhoto 6 only. I've already sent in a bug report - has anyone else tried double-clicking on a RAW file to go into Edit mode yet?
David Miller

I use Huey from Pantone to calibrate my monitor for consistancy in different lighting situations and across applications. But the same effect happens by choosing any one of the non-standard monitor calibrations.
Try this:
Choose a RAW photo and monitor calibratioin that causes the banding and discoloration.
Open the RAW photo in Edit mode and wait the couple of seconds for banding to appear.
Next, adjust the image size slider so that scroll bars appear at the bottom and right side of the photo. It doesn't take much. Notice the banding disappears!
Now grab one of the scroll bars and move it. Observe the banding and discoloration. And, when you release the scroll bar the banding disappears again.
I don't remember this happening with iPhoto 5.
I think it has something to do with the display
calibration. After I first saw this I switched back
to my default iMac G4 profile, and the problem wasn't
there anymore. I'm not sure what the difference is. I
set up several different profiles, each with
different choices for Advanced, White Point and
Gamma, and some trigger this banding, and some do
not.
Anybody have any similar experiences?

Power Mac g4 freezes up when put in sleep mode

Hello. So the machine has had a lot of changes but the problem just started a couple days ago, before that I was going into sleep mode just fine with no problems. The problem is when the computer goes to sleep it freezes, the screen goes black but the fan and hard drive are still going and the light never turns to the flashing amber. What's more I'm unable to wake it up or use the keyboard restart command. The only way to restart or shutdown are the buttons on the tower. So I've turned power saver off and now have just resorted to shutting down when it's not in use but that's pretty bad in the long run.
Any ideas on what may have started causing this? Like I said it's beem working perfectly for a while now.
Here's info on the machine
I'm running a modified AGP G4 stats as follows:
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (3.3) (Power Logix dual 1.3)
Number Of CPUs: 2
CPU Speed: 1.3 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.75 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
System Version: Mac OS X 10.4.9 (8P135)
Kernel Version: Darwin 8.9.0
Classic 9.2.2
ATI Radeon 9200:
Chipset Model: ATY,RV280
Type: Display
Bus: AGP
Slot: SLOT-A
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x5960
Revision ID: 0x0001
ROM Revision: 113-A27502-124
Displays:
SyncMaster:
Resolution: 1440 x 900 @ 60 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
ATA ST3200822A:
Capacity: 186.31 GB
Manufacturer: ATA
Model: ST3200822A
Revision:
Removable Media: Yes
BSD Name: disk2
OS9 Drivers: Yes
SCSI Target Identifier: 1
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
I also have a 60 gig HD installed which is currently not being used
Thanks again in advance.
Aaron

Did you install a USB 2.0 PCI card and do you leave bus-powered devices connected to it, when the computer goes into sleep mode? There have been many reported sleep issues associated with USB 2.0 cards in the G4s. What name is printed on the main controller chip (sometimes it's hidden by the card manufacturer's label)? The consensus of opinion is that USB 2.0 cards with an NEC chip tend to have fewer problems. Additionally, it's a good practice to disconnect the bus-powered devices from the card, prior to letting the computer go into sleep mode.

Re: Equium M Series died when put into normal mode

Similar Messages

Maybe you are looking for